American Micro Fuel Device RT001 Handlebar Mounted Transmitter User Manual

Download:
Mirror Download [FCC.gov]
Document ID	979876
Application ID	qpUpRaBvfZ5Ulsd2vrVdlg==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	175.65kB (2195565 bits)
Date Submitted	2008-08-01 00:00:00
Date Available	2008-08-01 00:00:00
Creation Date	2008-07-21 15:02:50
Producing Software	Adobe PDF Library 8.0
Document Lastmod	2008-08-01 12:04:56
Document Title	User Manual
Document Creator	Adobe InDesign CS3 (5.0.3)

Congratulations and thank you for your
decision to purchase RideMaxx, the World’s
most advanced and only wireless, electronic
fuel injection controller (EFI) designed
specifically for your motorcycle.
This Quick Start Guide will easily direct
you through the few installation steps
required to get you on your way to enjoying the riding improvements and benefits
of your new RideMaxx fuel injection
controller.
RideMaxx Quick Start Guide
Before installation, please register your
RideMaxx with us either online at our
website (americanmicrofuel.com), or by
mailing in the provided postage-paid
registration card. Your registration will
be necessary for you to enjoy the included
and more advanced levels of performance
tuning. Your specific RideMaxx registration number, its serial number, can be
found either on your warranty registration
card, or located on the bottom side of the
FuelMaxx (Yellow ECU module). Please
retain this number for your records.
In The Box
Your Parts:
FuelMaxx ECU Module
1		 RideMaxx Locking Nameplate
2		 FuelMaxx Bolts
RideTuner Handlebar Unit
To validate your warranty, registration Enjoy your RideMaxx EFI controller, we
must be completed within 30 days of your sure enjoy ours—and thank you so-much
purchase.
for your business.
2		 RideTuner Handlebar Bolts
We ask that you please take the time —The AMFD Team
to accurately fill in the questions in the
registration process—they only take a
few minutes of your time, and will help
AMFD provide you with the excellence
of customer service, advanced tuning and
the support that you should expect.
RideMaxx Hex Driver
(double ended)
RideMaxx Software CD
RideMaxx Decal
AMFD Decal
RideMaxx Bluetooth Passkey: 0000
1		 CR2 lithium Ion Battery
2		 Handlebar space reducer gaskets
		 (for 1″ Handlebars)
RideMaxx Quick Start Guide
Contents
FuelMaxx and RideTuner Overview
Installation
FuelMaxx Installation For Softails
10
FuelMaxx Installation For Baggers
12
RideTuner Installation
18
Finishing Installation
22
Using RideMaxx
23
Installing New Maps
24
RideTuner Battery
28
Exit Notes
RideMaxx Quick Start Guide
FCC
29
Warranty
30
RideMaxx: The FuelMaxx
RideMaxx: The RideTuner
As the core of the RideMaxx fuel- best possible riding experience without
management system, FuelMaxx is the sacrifice. It is engineered with your specific
brain. It is programmed to offer you the needs in mind.
The industry leading wireless Ride- (MaxxFuel Economy, MaxxPower,
Tuner mounts directly onto your and RideMaxx Auto) built into the
handlebar. It is your direct means to FuelMaxx module.
select from three separate options
The brain of the RideMaxx performance EFI control system
FuelMaxx and RideTuner Overview
Your wireless control of the FuelMaxx module
RideMaxx Quick Start Guide
FuelMaxx on Softails
The ECU Plug-in Module Installation for Softails
Prior to installation, please ensure that the ignition of your bike is turned off.
2. Using a 3/16˝ Allen Wrench, unbolt
all four ECU bolts and remove the ECU
while still attached to the ECU connector.
—Consult your bike’s manual for your specific
ECU removal instruction.
Ensure the ECU tray is located
at the maximum height on the
fender. This allows for needed clearance of
the FuelMaxx module. To do this, loosen the
bolts with a 3/8˝ wrench and slide the tray
up the fender. Retighten the bolts once in
position.
1.
Remove your seat by unscrewing the securing bolt.
—Consult your bike’s manual for your specific seat removal instruction.
Softail install continued on page 14…
10
Softail FuelMaxx Installation
RideMaxx Quick Start Guide
11
FuelMaxx on Baggers
The ECU Plug-in Module Installation for Baggers
Prior to installation, please ensure that the ignition of your bike is turned off.
2i. Remove the side cowling that is
behind the right side saddle bag to gain
access to the ECU.
2ii. Using a 3/16˝ Allen Wrench,
unbolt all four ECU bolts and remove
the ECU while still attached to the ECU
connector.
1i. Open your right side saddle bag and turn the two thumb screws to loosen and
remove the saddle bag. This allows access to the cowling beneath and ECU in turn.
—Consult your manual for specific bag removal instruction.
12
Bagger FuelMaxx Installation
RideMaxx Quick Start Guide
13
Continued FuelMaxx installation…
4. Remove the RideMaxx locking
nameplate from the FuelMaxx module
using the included 1/16˝ hex driver. Then
plug FuelMaxx into the ECU as shown.
5. Plug the ECU connector into
the open side of RideMaxx FuelTuner.
3.
14
Ensure a tight fit is achieved and the
release tab clips to FuelMaxx.
Unclip the Delphi connector that plugs into the ECU.
—Squeeze the release tab and wiggle it off.
FuelMaxx Installation
RideMaxx Quick Start Guide
15
Softail Installation
Bagger Installation
6. Using a 3/16˝ Allen Wrench, bolt 7. Using the included driver, replace
the ECU back down to the ECU tray. the RideMaxx locking nameplate.
6i. Using a 3/16˝ Allen Wrench, bolt
the ECU back down to the ECU tray.
Remounting the ECU and FuelMaxx
Remounting the ECU and FuelMaxx
Consult your bike’s manual for your specific ECU reinstall instruction. Ensure
a tight fit to the ECU tray and the nameplate is seated flush and bolted securely.
Warning—Do not overtighten. Stripping inserts voids warranty.
16
FuelMaxx Installation
7i. Using the included driver, replace
the RideMaxx locking nameplate.
Consult your bike’s manual for your specific ECU reinstall instruction. Ensure
a tight fit to the ECU tray and the nameplate is seated flush and bolted securely.
Warning—Do not overtighten. Stripping inserts voids warranty.
RideMaxx Quick Start Guide
17
RideTuner Installation
The handlebar-mounted control module installation
1. With the included RideMaxx 3/32˝
driver, remove the two bolts holding the
RideTuner together.
2. Separate the bottom half from the
top half without bending and remove
both semi circle gaskets.
18
RideTuner Installation
3. Remove the rubber battery retainer 4. Place the tray liner back into the
by gently peeling to expose the battery battery tray of the RideTuner.
tray inside. Insert the battery.
Note—polarity indication is in the battery tray for proper battery orientation.
Properly align and seat the rubber liner edges to secure a water tight fit.
Your battery is not under warranty; consult the warranty(pg.30) for details and the
battery information(pg.28) for acceptable replacements.
RideMaxx Quick Start Guide
19
• For 1 inch handlebars replace the included
semi-circle reducer gaskets. They are slightly
oversized for a proper compression fit.
5. Adjacent to the switch housing, attach
the RideTuner around the handlebar for
a loose hold. Position the button faces for
your desired orientation.
• Where any cabling on your handlebar is
an obstruction, it may be necessary to trim a
small section of your reducer gasket to allow
the cable to pass through your RideTuner.
6.
With the included RideMaxx 3/32˝ hex driver replace both bolts.
Ensure a tight fit is acheieved with tight pressure on the gaskets.
Warning—Do not overtighten. Stripping inserts voids warranty.
20
RideTuner Installation
RideMaxx Quick Start Guide
21
Finishing Installation
Testing your FuelMaxx and RideTuner modules
1. Without starting your bike, turn
the ignition switch from OFF to
IGNITION.
2. Observe the three LEDs on the
FuelMaxx ECU module:
—The red LED indicates your FuelMaxx
has power. Flashing indicates activity.
—The blue LED indicates your Bluetooth
enabled connection’s activity.
—The green LED indicates your FuelMaxx is in wireless communication with
your RideTuner. Note: This LED will only
indicate when switching settings with your
RideTuner.
3. Observe the LED on the RideTuner
handle-mount module:
22
—Press either the PWR or ECON
button to awaken the RideTuner for a
blue indicator(RideMaxx Auto). Note: A
white indicator means the RideTuner is
looking for the FuelMaxx module.
—Press the PWR button for a red indicator (MaxxPower).
—Press the PWR button a second time
to return to RideMaxx Auto.
—Press the ECON button for a green
indicator(MaxxFuel Economy).
—Press the ECON button a second time
to return to RideMaxx Auto.
—The LED will remain on for 10 seconds
until the RideTuner returns to sleep.
Finishing Installation
When the FuelMaxx power LED indicates and the RideTuner toggles ride options (see
FuelMaxx green LED) RideMaxx is fully functional. Replace your seat and bolt (Softails)
or cowling and saddlebag (Baggers). Congratulations, RideMaxx is installed!
Note—RideMaxx will always start in the RideMaxx Auto setting when you start
your bike unless configured otherwise with the included software. Once the RideTuner
is asleep, any button press will awake it and indicate the current setting.
Using RideMaxx
The RideMaxx Auto, MaxxPower, and MaxxFuel Economy settings on the RideTuner
Two default pre-configured maps, performance adjustment files, are installed
as MaxxFuel Economy and MaxxPower.
The third setting, RideMaxx Auto, does
not require a map. All three settings
eliminate backfiring and increase throttle
response.
By default RideMaxx will start in the RideMaxx Auto setting when you start your
bike. This setting will alternate between
the economy and power settings depending
on your throttle position.
The MaxxPower setting, once selected, will
prioritize horsepower and acceleration.
For further information on maps please see
the Installing Maps section on page 24. The MaxxFuel Economy setting, once
selected, will prioritize mileage.
RideMaxx Quick Start Guide
23
Installing Maps
Establish a Bluetooth enabled connection with Ridemaxx
If your computer uses an alternative Bluetooth Wizard, please see our website
americanmicrofuel.com/support/bluetooth
1. Ensure your bike’s ignition switch is
switched from OFF to IGNITION.
2. Navigate to your Control Panel. Find
it immediately under the Start Menu on the
right.
5. In the Bluetooth Devices dialogue, 6. In the Add Bluetooth Device
press the button Add to add your Wizard check off the box My device is
RideMaxx device.
set up and ready to be found and press
Next.
3. Switch to Classic View if you are in
Category View.
7. Once your RideMaxx device has been
found, select it and then press Next.
4. Locate the Bluetooth Devices icon
and double click.
24
Using RideMaxx
RideMaxx Quick Start Guide
25
8. Select Use the passkey found in the
documentation.
Enter the passkey 0000 and press Next.
10. From the included software cd, install the RideMaxx Wizard.
11. Press the RideMaxx Connection
Wizard button. Follow the on screen directions and once asked for the RideMaxx
port, select the Outgoing COM Port you
wrote down previously.
12. Press the Map Selection button.
Follow the on screen directions to choose
the map for your bike.
13. Press the Send Map button to install
this file to RideMaxx.
9. When the Wizard is finished installing the device, press Next. Write down the
Outgoing COM Port. Once the device is completed press Finish. Your device is now
ready to communicate with your computer.
26
Using RideMaxx
RideMaxx Quick Start Guide
27
RideTuner Battery
About your battery and replacing it
The included RideTuner Lithium Ion 3v
CR2 battery has a minimal usage time
and is not under warranty; due to the
constant communication between your
FuelMaxx module and RideTuner the
included battery’s charge may be depleted
quickly. Replacing your battery will extend
usage time. For example, a battery rated for
800mAh can last up to 90 days.
Replacement CR2 batteries are commonly
available at major retail stores from popular
brands such as Duracell, Energizer and
Panasonic; they are often referred to as
CR2 Photo or Camera batteries.
Capacity and length of usage may vary
from battery to battery. A battery’s mAh
rating is a general guide for which batteries
last longest.
28
CR2 3v Litium Ion Battery
Duracell
925mAh
Kodak
850mAh
Energizer
800mAh
Panasonic
750mAh
Fuji—rechargeable
250mAh
Capacities may vary—use this chart
as a rough guide only.
Using RideMaxx
FCC Disclaimer
This device complies with part 15 of the
FCC Rules. Operation is subject to the
following two conditions: (1) This device
may not cause harmful interference, and
(2) this device must accept any interference
received, including interference that may
cause undesired operation.
QDID B010708
FuelMaxx FCC ID: WG2FM001
FuelMaxx IC: 7811A-FM001
RideTuner FCC ID: WG2RT001
RideTuner IC: 7811A-RT001
RideMaxx Quick Start Guide
Part 15.21
Changes or modifications not expressly
approved by the party responsible
for compliance could void the user’s
authority to operate the equipment.
NOTE: The manufacturer is not responsible for any radio or TV interference
caused by unauthorized modifications to
this equipment. Such modifications could
void the user’s authority to operate the
equipment.
29
Limited Warranty
How AMFD takes care of you
American Micro-Fuel Device Corp’s warranty obligations
are limited to the terms set forth below:
American Micro-Fuel Device Corp, (“AMFD”) warrants this
RideMaxx™ product (“product”) against defects in material
and workmanship for the period of one (1) year. The warranty
period begins on the date of original retail purchase.
This limited warranty is made only to the original end user
and purchaser (“you”) of the product and does not extend
to any subsequent purchasers or owners of the product. The
“original end user” is the first user to put the product into
service in any fashion. It is your responsibility to establish
the warranty period by verifying the original purchase date.
Accordingly, to avoid denial of coverage or dispute, you MUST
register your warranty either online at the AMFD website or
return the warranty/registration card to AMFD within thirty
(30) days after the date of purchase. This limited warranty
is void should you NOT register your warranty within thirty
(30) days of the date of purchase. If you discover a defect,
AMFD will, at its option, repair or replace this product
with a new or reconditioned product at no charge to you,
provided you return it during the warranty period, with
transportation charges prepaid, to AMFD. (You can obtain
additional information by contacting AMFD at the address
printed in this manual). Please attach your name, address,
telephone number, and a copy of the bill of sale as proof
of date of original retail purchase, as well as a detailed
description of the problem for which warranty service is
requested. Prior to returning the product, you must obtain
a Return Merchandise Number (RMA#) from AMFD. Contact
AMFD directly to obtain your RMA#. You are responsible
for packaging the product to be returned. If the repairs are
covered by this Limited Warranty and if the product was
properly shipped to AMFD, AMFD will pay the return shipping
30
charges. This limited warranty applies only to RideMaxx™
products manufactured by AMFD that can be identified by
the “RideMaxx™” trademark, trade name, or logo affixed
to them. This limited warranty does not cover: damage
resulting from the accidental, misuse, abuse, or neglect
and/or damage during any type of transportation resulting
from improper packaging; damage to any product which
has been altered in any fashion, including the alteration
or removal of any AMFD serial number; damage resulting
from causes other than product defects, including and not
by way of limitation, lack of technical skill, competence, or
experience of the user, and/or failure to use the product
in accordance with the instructions provided in the User’s
Manual; and service performed by an unauthorized person
or entity. Any implied warranties including fitness for
use and merchantability are limited in duration to the
period of the expressed limited warranty set forth above.
The remedies provided under this limited warranty are
exclusive and in lieu of all other remedies. AMFD hereby
expressly disclaims liability and shall not be responsible
in any way for incidental, consequential and contingent
damages of any kind or nature, including, without limitation:
damages to persons or property, whether a claim or such
damages is based upon warranty, contract, tort or otherwise;
damages due to or arising out of the loss of data; or lost
profits, inconvenience, loss of transportation or otherwise.
AMFD shall not be responsible for any damages caused by
the presence of error or omission in any of its manuals,
instructions or related materials.
Serial / Registration Number:
Exit Notes


---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Tagged PDF                      : Yes
XMP Toolkit                     : 3.1-701
Instance ID                     : uuid:1b7f0d3d-ac33-48b6-9e46-6ec0be920894
Document ID                     : adobe:docid:indd:861a50cb-576d-11dd-8487-ce5f8ab34858
Rendition Class                 : proof:pdf
Derived From Instance ID        : 567419a9-5762-11dd-9962-b713deebc79f
Derived From Document ID        : adobe:docid:indd:4184448e-17a1-11dd-91d6-9363df4f15e1
Manifest Link Form              : ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream
Manifest Placed X Resolution    : 300.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 72.00, 300.00, 72.00
Manifest Placed Y Resolution    : 300.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 72.00, 300.00, 72.00
Manifest Placed Resolution Unit : Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches
Manifest Reference Instance ID  : uuid:30986353C03CDD11A46FFDA9A58E2088, uuid:8e196993-b2ea-4229-aaa7-565c8621011c, uuid:d2cdd2f6-2710-4a46-8f3b-a932dff5e0ec, uuid:0d073c20-b989-4139-8077-010e8bcbd6fc, uuid:95131848-fcee-487b-aa1b-e48cf11ba550, uuid:ccb4a5f0-b95e-4251-b8c5-5acb2cbcdfa2, uuid:89cefa3e-ddf6-4718-9e39-78e7dd40a177, uuid:c8a91d49-f557-4b2c-9ec5-008b9e02bc7f, uuid:4aa7461a-29a6-4849-8884-e3dbc322733e, uuid:b8b9a6b2-0747-498b-b032-29e6656f49bf, uuid:095321e4-65ee-4bf4-9642-f1ba074075a5, uuid:9af1cdf0-2283-4b89-a077-56a5f82ba912, uuid:97fa68e8-41e7-40cb-a4e3-1ce54878bb56, uuid:f92a30b8-ea7e-4091-a694-1d0d65b68f8e, uuid:626b68f4-e728-4e1d-a1ad-80e4ec8bcf4b, uuid:e51b8e13-b7df-461f-8d4f-90dd35981778, uuid:7e3831c9-828f-45b5-a879-3b28612a42f9, uuid:b6db9608-872a-4d5f-a195-11097d5867d6, uuid:af3c49ee-e9ed-4ae1-97cc-117b9c407ed4, uuid:af512ee8-c79e-43db-8deb-2ca3df5c5900, uuid:819a5586-341a-46b4-bc06-499d6c716929, uuid:062c17c3-30b7-4944-8d60-f950f4b31162, uuid:19b036f5-dc4d-4dd8-93da-a2d1ec9f9e85, uuid:4f926d6a-81a0-402c-b404-6dfc855c189f, uuid:593f1a72-a4f4-4837-87c5-25fc6a38f084, uuid:796fe246-74b3-4d3a-9ae9-a0696533c673, uuid:841c1ad9-d9a2-4a6f-b5d1-99c52e6589a8, uuid:1B74AB315F57DD119DB1C4BB98385417, uuid:0F15B7345F57DD119DB1C4BB98385417, uuid:EC6049245F57DD119DB1C4BB98385417, uuid:E36049245F57DD119DB1C4BB98385417, uuid:3CF47C2D5F57DD119DB1C4BB98385417, uuid:E0F6982B5F57DD119DB1C4BB98385417, uuid:269847265F57DD119DB1C4BB98385417, uuid:4C3067285F57DD119DB1C4BB98385417, uuid:56BF5FBB6857DD11AB08EE48191C59F1, uuid:8A47C9966A57DD11AB08EE48191C59F1, uuid:ef9db411-4bb1-4296-82d0-845a5072e571, uuid:30986353C03CDD11A46FFDA9A58E2088, uuid:8e196993-b2ea-4229-aaa7-565c8621011c
Manifest Reference Document ID  : uuid:80A7F8C9F13BDD11B372D9DF6A3DA71C, uuid:1DD0859BD54DDD118A3AF976EE1454C9, uuid:88DFD41C8461DC11B1D39461DC24AFEE, uuid:E30FAB3E2707DD11A5D2EC7B5E8DCC54, uuid:5750223AF20FDD11B347E9A40F9A493D, uuid:D25568743E12DD11B595948DE074F6D9, uuid:D55568743E12DD11B595948DE074F6D9, uuid:D4754D1A5AFCDC11989180290C35FE5C, uuid:D85568743E12DD11B595948DE074F6D9, uuid:DA5568743E12DD11B595948DE074F6D9, uuid:12E2F40F030CDD119231F205426D3E9D, uuid:D5062ED44512DD11B595948DE074F6D9, uuid:D7062ED44512DD11B595948DE074F6D9, uuid:D9062ED44512DD11B595948DE074F6D9, uuid:E33615A2AFF6DC11A8D0D506396FF302, uuid:8D316BDBD80CDD118720AF017A67FF8D, uuid:DC062ED44512DD11B595948DE074F6D9, uuid:720875CDA2F6DC11A8D0D506396FF302, uuid:B7527052CDF6DC11A8D0D506396FF302, uuid:CF42735BCC0CDD118720AF017A67FF8D, uuid:CC42735BCC0CDD118720AF017A67FF8D, uuid:B0BCDDEA5312DD11B595948DE074F6D9, uuid:AEBCDDEA5312DD11B595948DE074F6D9, uuid:96316BDBD80CDD118720AF017A67FF8D, uuid:1892F244A20DDD118EC8EBCB245DAC95, uuid:5E5C32EB0AFDDC11A238F383859C458A, uuid:FAA10ACDEA12DD11825FCAF2E08E7707, uuid:1774AB315F57DD119DB1C4BB98385417, uuid:0B15B7345F57DD119DB1C4BB98385417, uuid:E86049245F57DD119DB1C4BB98385417, uuid:164994C05E57DD119DB1C4BB98385417, uuid:E5F6982B5F57DD119DB1C4BB98385417, uuid:DCF6982B5F57DD119DB1C4BB98385417, uuid:229847265F57DD119DB1C4BB98385417, uuid:483067285F57DD119DB1C4BB98385417, uuid:55BF5FBB6857DD11AB08EE48191C59F1, uuid:5EBF5FBB6857DD11AB08EE48191C59F1, uuid:993D3F4EF91DDD118324E4DEC6A320DC, uuid:80A7F8C9F13BDD11B372D9DF6A3DA71C, uuid:1DD0859BD54DDD118A3AF976EE1454C9
Create Date                     : 2008:07:21 15:02:50-07:00
Modify Date                     : 2008:08:01 12:04:56-07:00
Metadata Date                   : 2008:08:01 12:04:56-07:00
Creator Tool                    : Adobe InDesign CS3 (5.0.3)
Thumbnail Format                : JPEG
Thumbnail Width                 : 256
Thumbnail Height                : 256
Thumbnail Image                 : (Binary data 20984 bytes, use -b option to extract)
Format                          : application/pdf
Producer                        : Adobe PDF Library 8.0
Trapped                         : False
Page Count                      : 17
Creator                         : Adobe InDesign CS3 (5.0.3)

EXIF Metadata provided by EXIF.tools