American Standard Lakeland 31 Large Single Bowl Sink 7173 001 Users Manual KITCHEN SINKS

: American-Standard American-Standard-Lakeland-31-Large-Single-Bowl-Sink-7173-001-Users-Manual-416491 american-standard-lakeland-31-large-single-bowl-sink-7173-001-users-manual-416491 american-standard pdf

Open the PDF directly: View PDF .
Page Count: 2

Download
Open PDF In Browser	View PDF

LAKELAND™ 31”
LARGE SINGLE BOWL SINK
AMERICAST®

LAKELAND 31” LARGE SINGLE BOWL
KITCHEN SINK
•
•
•
•
•

Americast® brand engineered material
Single bowl design
Self-rimming or undercounter installation
Silicone sealant supplied
Available in 1, 3,4 or 5 faucet hole configuration

Self-Rimming:
❏ 7173.001 Center hole only
❏ 7173.803 3 hole
❏ 7173.804 4 hole
❏ 7173.805 5 hole (Illustrated)
Undercounter Installation:
791123-100 Mounting Kit (consists of
cut-out templates and mounting clips

❏

Nominal Dimensions: 787 x 559 x 241mm
(31" x 22" x 9-1/2")
Bowl sizes:
679mm (26-3/4") wide, 413mm (16-1/4") front to
back 229mm (9") deep

Shown with 7230.152H Heritage Kitchen Faucet with
Cross handles (not included)

See reverse side for roughing-in dimensions

Compliance Certifications Meets or Exceeds the Following Specifications:
• ASME A112.19.4M for Americast Plumbing Fixtures
• ASTM E162 for Flammability
• NFPA 258 for Smoke Density

To Be Specified
❏

Color:

❏

Faucet*:

❏

Faucet Finish:

❏

Basket Strainer: 4331.013

❏

Soap Dispenser: 4503.115, Color:

❏

Trap:

* See faucet section for additional models available

KS-53
© 2003 American Standard Inc.

Revised 3/03

LAKELAND™ 31”
LARGE SINGLE BOWL SINK
AMERICAST®

7173.001/803/4/5Self-Rimming
NOTES:
FINISHED WALL OR SPLASHBACK
54mm
(2-1/8)

51mm (2
OPTIONAL

102mm 102mm 102mm 102mm
(4)
(4)
(4)
(4)
H
C

●
38mm
(1-1/2) DIA.
HOLES TYP.
SPRAY

FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
PROVIDE SUITABLE REINFORCEMENT FOR WALL & COUNTERTOP
SUPPORTS.
IMPORTANT: Dimensions of fixtures are nominal and may vary within the
range of tolerances established by ANSI Standard A112.19.4
These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided leaflet.

206mm
(8-1/8)
7173.805
(5 HOLES)

7173.804
(4 HOLES)

559mm
(22)
89mm
(3-1/2)
DIA.

COUNTERTOP CUTOUT 756mm X 527mm WITH 25mm RADIUS (29-3/4
X 20-3/4 WITH 1” RADIUS)

38mm
(1-1/2)
RAD TYP.
●

213mm
(8-3/8)

CUTOUT NOTE

394mm
(15-1/2)
787mm
(31)

COUNTERTOP
BY OTHERS

13mm
(1/2)

203mm
(8)

SEALING
COMPOUND

E
254mm
(10)

*

COUPLING NUTS
ON FITTING

229mm
(9)

146mm
(5-3/4)

* 3/8 O.D. BENDABLE TUBING
1-1/2 O.D. TAILPIECE

914mm
(36)
TO FINISHED
FLOOR (OPTIONAL)

FINISHED FLOOR

FAUCET

7173.001/803/4/5 Undercounter Mount

E

RELIANT

4205.241

TOP MOUNT

*

6270.000

41mm(1-5/8)

FINISHED WALL OR SPLASHBACK
54mm
(2-1/8)

51mm (2
OPTIONAL

102mm 102mm 102mm 102mm
(4)
(4)
(4)
(4)
H
C

38mm
(1-1/2) DIA.
HOLES TYP.
SPRAY

206mm
(8-1/8)

7173.804
(4 HOLES)

7173.805
(5 HOLES)
559mm
(22)

● TEMPLATE PROVIDED WITH MOUNTING KIT 791123-100 FOR UNDERCOUNTER, INSTALLATION AND COUNTERTOP CUTOUT.
FITTINGS AND UNDERCOUNTER MOUNTING KIT NOT INCLUDED AND
MUST BE ORDERED SEPARATELY.
PROVIDE SUITABLE REINFORCEMENT FOR WALL & COUNTERTOP SUPPORTS.
IMPORTANT: Dimensions of fixtures are nominal and may vary within the range
of tolerances established by ANSI Standard A112.19.4
These measurements are subject to change or cancellation. No responsibility is
assumed for use of superseded or voided leaflet.

DETAIL OF MOUNTING CLIP
(KIT No.791123-100)

89mm
(3-1/2)
DIA.

NOTES:

BRASS
INSERT
SINK

38mm
(1-1/2)
RAD TYP.

MOUNTING CLIP
(SEE DETAIL)

13mm
(1/2)
MIN.

CLIP
MACH.
SCREW

●

CUTOUT NOTE

213mm
(8-3/8)

394mm
(15-1/2)

REFER TO INSTRUCTIONS
PROVIDED WITH KIT FOR
ADDITIONAL INFORMATION

787mm
(31)
COUNTERTOP
BY OTHERS

13mm
(1/2)

203mm
(8)

SEALING
COMPOUND

E
254mm
(10)

*

COUPLING NUTS
ON FITTING

241mm
(9-1/2)

146mm
(5-3/4)

* 3/8 O.D. BENDABLE TUBING
1-1/2 O.D. TAILPIECE

FINISHED FLOOR

FAUCET

KS-54
© 2003 American Standard Inc.

E

RELIANT

4205.241

TOP MOUNT

*

6270.000

41mm(1-5/8)

914mm
(36)
TO FINISHED
FLOOR (OPTIONAL)



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Create Date                     : 2003:03:10 13:27:16
Producer                        : Acrobat Distiller 4.0 for Macintosh
Creator                         : QuarkXPressª 4.1: LaserWriter 8 8.7.1
Author                          : marianne
Title                           : KITCHEN SINKS
Modify Date                     : 2003:03:10 13:28:33-05:00
Page Count                      : 2

EXIF Metadata provided by EXIF.tools