American Standard Lifetime 2425L Lho Users Manual

Lifetime 2425L-RHO a005a963-57a3-4ea0-a2fc-a909588afb7a

Lifetime 2425LC-RHO e3c25318-db82-4af6-85bc-99534370a273

2425L-RHO to the manual 18076e4b-c60d-4b21-b9c8-0b4400d5d011

: American-Standard American-Standard-Lifetime-2425L-Lho-Users-Manual-415269 american-standard-lifetime-2425l-lho-users-manual-415269 american-standard pdf

Open the PDF directly: View PDF .
Page Count: 2

Download
Open PDF In Browser	View PDF

LIFETIME™ 5' X 32" IA-LHO/RHO

WHIRLPOOLS BY AMERICAN STANDARD
HIGH GLOSS ACRYLIC

LIFETIME™ 5’ X 32”IA-LHO / RHO
Comfortable bathing design with form-fitted backrest
and molded-in armrests

❏ Model# 2425L-LHO Built-In Integral Apron
Left Hand Drain Outlet (specify color)

❏ Model# 2425L-RHO Built-In Integral Apron

Right Hand Drain Outlet (specify color)
• Acrylic with fiberglass reinforcement
• Lifetime Overflow Drain for maximum
water depth
• Integral apron with removable access panel
• Integral three-sided, tiling / water
retention flange
• 1.4 HP self-draining pump/motor with dry
run seal
• Eight flow adjustable jets including:
	
Two adjustable Ideal Flow Comfort Jets™
	
Six adjustable Comfort Jets™
• Two silent air volume controls
• Side-mounted On/Off control
• Designed with undermount installation option
• Complete factory installed and tested
whirlpool system

❏ Model# 2425LC-LHO Built-In Integral Apron
Left Hand Drain Outlet (specify color)

❏ Model# 2425LC-RHO Built-In Integral Apron

Right Hand Drain Outlet (specify color)
• Same as above with the EverClean™ whirlpool
system. The EverClean™ antimicrobial system
incorporates AlphaSan®, a patented
antimicrobial agent manufactured right into the
circulation system components, which
suppresses the growth of unsightly algae,
fungus, mold and mildew.	

Nominal Dimensions:
60” x 32” x 21-1/2”
(1524 x 813 x 546mm)
Compliance Certifications Meets or Exceeds the Following Specifications:
• Underwriters Laboratories - Hydromassage 		
Bathtubs UL 1795
• ASME A112.19.7M for Whirlpool Appliances
• ANSI Z124.1 for Plastic Bathtubs
• ASTM E162 for Flammability
• NFPA 258 for Smoke Density

Components Required:
❏ Bath Filler*: (specify finish)
❏ Bath Drain: 1599.205.XXX (specify color)
	
OR 1599.500.020 (white only)
Custom Accessories Available:
❏ E-Z-Install™ Whirlpool Heater - EZHEAT-100
* See American Standard Faucet Selector

For color/finish availability and other faucet choices, please
see the Product Selector and Pricing Guide.
NOTE: E-Z-Install™ Whirlpool Heater is designed to
maintain water temperature during operation. It will not heat
cold water to desired bathing temperature.

SEE REVERSE FOR ROUGHING-IN DIMENSIONS
AND PRODUCT SPECIFICATIONS

AlphaSan® is a registered trademark of Milliken & Co.
© 2007 American Standard Inc.

HD-7

Revised 7/07

LIFETIME™ 5' X 32" IA-LHO/RHO

WHIRLPOOLS BY AMERICAN STANDARD
HIGH GLOSS ACRYLIC

Model 2425L-LHO Shown

60"
(1524mm)
3"
(76mm)

10-1/2"
(267mm)
7-1/2"
(191mm)

16"
(406mm)

6"
(152mm)
32"
(813mm)

CUT OUT IN FLOOR
FOR DRAIN

13-1/2"
(343mm)
32"
(813mm)

C/L OF
OVERFLOW

21-1/2"
(546mm)
20-1/2"(H)
(521mm)

19-1/8"(A)
(486mm)

DIMENSIONS OF FIXTURES ARE NOMINAL AND MAY VARY WITHIN THE RANGE
OF TOLERANCES ESTABLISHED BY ANSI STANDARDS Z124.1 AND A112.19.7.

GENERAL SPECIFICATIONS FOR 2425L WHIRLPOOL
INSTALLED SIZE
60 x 32 x 20-1/2 (1524 x 813 x 521mm)
WEIGHT
92 Lbs. (42 Kg.)
WEIGHT w/WATER
675 Lbs. (306 Kg.)
GAL. TO OVERFLOW
70 Gal. (265 L.)
WHIRLPOOL MIN. OPERATING VOL.
39 Gal. (148 L.)
BATHING WELL AT SUMP
42 x 22 (1067 x 559mm)
BATHING WELL AT RIM
53 x 25-1/2 (1346 x 648mm)
WATER DEPTH TO OVERFLOW
17-1/2 (445mm)
FLOOR LOADING
51 Lbs./Sq.Ft. (247 Kgs./Sq.m)
(PROJECTED AREA)

PUMP

WHIRLPOOL ELECTRICAL SPECIFICATIONS
1.4 HP, 9.7 AMPS,120V.

NOTES:
BATH CAN BE INSTALLED EITHER ABOVE OR BELOW FLOOR LINE AS PIER, ISLAND, OR PENINSULA TYPE INSTALLATION. SUPPORT OF
BATH BY SUMP BEDDING. SUPPORT AND ENCLOSING MATERIAL BY OTHERS.
■ REFER TO INSTALLATION INSTRUCTIONS SUPPLIED WITH WHIRLPOOL FOR ADDITIONAL INFORMATION.
FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
PROVIDE SUITABLE REINFORCEMENT FOR ALL SUPPORTS.
IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI Standard Z124.1
These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided leaflet.

© 2007 American Standard Inc.

HD-8

Revised 7/07



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Modify Date                     : 2007:07:30 09:56:11-04:00
Create Date                     : 2007:07:30 09:56:02-04:00
Metadata Date                   : 2007:07:30 09:56:11-04:00
Creator Tool                    : Adobe InDesign CS2 (4.0)
Format                          : application/pdf
Document ID                     : uuid:c05904e7-cb65-49eb-848b-10d742c43f19
Instance ID                     : uuid:5c67d376-6ca4-4855-9390-1ed821aa9edb
Producer                        : Adobe PDF Library 7.0
Page Count                      : 2
Creator                         : Adobe InDesign CS2 (4.0)

EXIF Metadata provided by EXIF.tools