Amf Super Cross Grain Sheeter Users Manual 22 N AA NEW11x17
Super Cross Grain Sheeter to the manual 8978e721-5be8-4dfb-a89e-c06561f8a983
2015-02-05
: Amf Amf-Super-Cross-Grain-Sheeter-Users-Manual-508636 amf-super-cross-grain-sheeter-users-manual-508636 amf pdf
Open the PDF directly: View PDF 
.
Page Count: 4
| Download | |
| Open PDF In Browser | View PDF |
SUPER ‘’S’’ CROSS GRAIN SHEETER/MOULDER/PANNER Shown with optional Dough Spacer Shown with optional Handtwist Table • Stainless steel construction • 100 + pieces per minutes • Reliable performance SUPER ‘’S’’ CROSS GRAIN SHEETER/MOULDER/PANNER Sheeter Section Moulder Section • Stainless steel construction. • Slanted infeed conveyor with Teflon® coated dough guides. • Adjustable flattener roll. • Removable D.C. variable speed stainless steel flour sifter with automatic cut-off. (optional A.C.) • High speed transfer conveyor. • Fully adjustable plow and curling mat. • Smooth high speed transfer of product. • Delrin transfer plate *Super “S” users have confirmed speeds of 120 LPM for prolonged periods of time. Above shown with high speed transfer conveyor. Shown with optional new larger dough spacer. • Stainless steel motorized pressure board. • Air operated lifting device (optional shown left) permits: - Rapid change over of dough guides. - Easier access for sanitation and maintenance purposes. • Easily adjustable pan guides. 2" CLEARANCE 6-1/4" TRANSFER BELT HAND TWIST TABLE PANNER 24-1/4" MOULDER PANNER MAKE-UP BELT 8'-7" HAND TWIST TABLE FLOUR SIFTER 28" 7'-2" SHEETER RH MACHINE SHOWN • STAINLESS STEEL CONSTRUCTION • EQUIPMENT MEETS OSHA REQUIREMENTS • WORKING RANGE: 6 OZ. TO 36 OZ. / 7" TO 19" NEW LARGER DOUGH SPACER 22-3/4" 30-1/2" SUPER ‘’S’’ CROSS GRAIN SHEETER/MOULDER/PANNER Pan indexers • Magnetic pan indexer (chain type) • Magnetic pan indexer (belt type) - Replaceable magnet plates. - Center magna rail design. - Horton clutch and brake. - Adjustable mold sensor. - Adjustable mold sensor. - Motor SEW Eurodrive 3/4 H.P. with brake. OR Hand twist table • Stainless steel frame and table. • Driven U.H.M.W. panning rollers. • Polytek SP93F (20" wide) conveyor belt. • Adjustable dough dropping mechanism. • Mechanical variable speed 3/4 H.P. TEFC motor with reducer 10:1. • Magnetic pan indexer is A.C. driven 1-1/2 H.P. TEFC motor with Horton clutch and brake. • Adjustable flattener roll with bakery roller compound #747 sleeve. • A.C. drive on twist table belt (optional). Optional hand twist table shown (not in operating position). Optional hand twist table shown (in operating position). SUPER ‘’S’’ CROSS GRAIN SHEETER/MOULDER/PANNER Sheeter Section • Special slanted infeed conveyor with Teflon® coated dough guides and adjustable flattener roller (Elev. 61'' ± 1''). Infeed conveyor speed 160 FPM. • D.C. variable speed, removable st. st. flour siflers with automatic cut-off. • Adjustable top and bottom sheeting rolls are 17 » wide. • Baker Teflon® coated sheeting roll scrappers. • Sheeting rolls 17'' wide adjustable. • Top sheeting roll is grooved to prevent dough hesitation. • Sheeting rolls driven by a 2 H.P. motor. - Top: 320 RPM - Bottom: 400 RPM • Sheeter belt 14" wide SP93F polytek endless. - Mechanical variable speed - Elevation 38" ± 1'' • Sheeting rolls guard (Lexan®) with safety switches. • Stainless steel removable panels with safety switches. • Adjustable legs. • Stainless steel sliding catch pan. Moulder / Panner section • Special transfer conveyor with Delrin transfer plate, fully adjustable stainless steel plow and curling mat. • D.C. variable speed removable flour sifter. • Motorized pressure board, adjustable at both ends, with floating action (19" wide). • U.H.M.W. adjustable dough guides with stainless steel backing and numeric graduation. • Polytech SP93F moulder make-up belt (20" wide 168 FPM). • Adjustable pan guides. • Dual strand plastic table-top pan conveyor. • Magnetic pan indexer. • Stainless steel sliding catch pan. Electrical Specifications • Nema 4 remote control panel mounted under moulder frame with the following: - Allen Bradley starters - D.C. controls for flour dusters - Main disconnect switch - Relays, terminal block, wiring • Nema 4 operator panel mounted to moulder frame with the following: - Allen Bradley push-buttons and alarm message display - Potentiometers for flour sifters - Safeties - Emergency stop • CAD electrical drawings. Options • Pressure board with air operated lifting device. • Third set of sheeting rollers for high speed performance and specialty doughs. • Complete set of inserts style adjustable U.H.M.W. dough guides (1/2", 3/4", 1", 1-1/4"). • A.C. inverters on the following: - Sheeting rolls - Sheeter belt (speed 295 to 700 FPM) - Transfer belt (speed 113 to 342 FPM) - Moulder make-up belt (speed 84 FPM to 252 FPM) - Pan conveyor: - Table-top (60 to 180 FPM) - Magnetic (80 FPM) - Flour sifters • Remote, combined master control panel for 2 or 3 moulders. For more information please call your Account Manager or 1-800-BAKERS-1. Headquarters AMF Bakery Systems 2115 West Laburnum Avenue Richmond, Virginia 23227 1-800-225-3771 or 804-355-7961 FAX: 1-804-342-9724 European operation West Park Ring Road Leeds LS16 6QQ England Tel.: 1132-787110 Fax: 1132-741415 www.amfbakery.com sales@amfbakery.com AMF’s continuing engineering is constantly improving product performance. Consequently machinery specifications are subject to change without notice. 06/2001 22-N-AA
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.2 Linearized : Yes Create Date : 2001:06:27 14:16:14-07:00 Modify Date : 2001:06:27 14:16:14-07:00 Page Count : 4 Creation Date : 2001:06:27 21:16:14Z Mod Date : 2001:06:27 21:16:14Z Producer : Acrobat Distiller 5.0 for Macintosh Author : lukas Metadata Date : 2001:06:27 21:16:14Z Creator : lukas Title : 22-N-AA NEW11x17EXIF Metadata provided by EXIF.tools