Amx Nxd 700Vi Users Manual Operation/Reference Guide 7 Modero Wall/Flush Mount Touch Panel With Intercom
NXD-700Vi to the manual b3716e67-f0d4-47e1-a557-ee0deedab8c3
2015-02-05
: Amx Amx-Nxd-700Vi-Users-Manual-508966 amx-nxd-700vi-users-manual-508966 amx pdf
Open the PDF directly: View PDF
Page Count: 226 [warning: Documents this large are best viewed by clicking the View PDF Link!]
- NXD-700Vi 7" Modero® Wall/Flush Mount Touch Panel with Intercom
- Introduction
- NXA-AVB/ETHERNET Breakout Box
- NXD-700Vi Touch Panel Accessories
- NXA-CFSP Compact Flash (FG2116-7x)
- Installation and Upgrade of the Internal NXD Components
- Installation
- Overview
- Installing the No-Button Trim Ring
- Installing the Button Trim Ring
- Pre-Wall Installation of the Conduit Box
- Installation of an NXD Touch Panel
- Wiring Guidelines for the NXD-700Vi Panels
- Audio/Video Port: Connections and Wiring
- Ethernet/RJ-45 Port: Connections and Wiring
- USB Port: Connecting and Using Input Devices
- Panel Calibration
- Configuring Communication
- Overview
- Modero Setup and System Settings
- Wireless Settings Page - Wireless Access Overview
- Configuring a Wireless Network Access
- Step 1: Configure the Panel’s Wireless IP Settings
- Step 2: Configure the Card’s Wireless Security Settings
- Step 3: Choose a Master Connection Mode
- Using G4 Web Control to Interact with a G4 Panel
- Using your NetLinx Master to control the G4 panel
- Upgrading Modero Firmware
- Firmware Pages and Descriptions
- Setup Navigation Buttons
- Setup Page
- Information
- Protected Setup Navigation Buttons
- Protected Setup Page
- System Settings Page
- Wireless Settings Page
- Secondary Connection Page
- Wireless Security Page
- Open (Clear Text) Settings
- Static WEP Settings
- WPA-PSK Settings
- EAP-LEAP Settings
- EAP-FAST Settings
- EAP-PEAP Settings
- EAP-TTLS Settings
- EAP-TLS Settings
- Client certificate configuration
- Calibration Page
- G4 Web Control Page
- Sensor Setup
- Making the Most of the Automated Brightness Control Feature (DIM Mode)
- Other Settings
- Tools
- EAP Security & Server Certificates
- Full Duplex Intercom
- Programming
- Overview
- Button Assignments
- Page Commands
- Programming Numbers
- "^" Button Commands
- Text Effects Names
- Button Query Commands
- Panel Runtime Operations
- Input Commands
- Embedded Codes
- Panel Setup Commands
- Dynamic Image Commands
- Intercom Commands
- SIP Commands
- ^PHN- AUTOANSWER
- ^PHN-CALL
- ^PHN-INCOMING
- ^PHN- LINESTATE
- ^PHN- MSGWAITING
- ^PHN-PRIVACY
- ^PHN-REDIAL
- ^PHN- TRANSFERRED
- ^PHN-ANSWER
- ^PHN- AUTOANSWER
- ?PHN- AUTOANSWER
- ^PHN-CALL
- ^PHN-DECLINE
- ^PHN-DTMF
- ^PHN-HANGUP
- ^PHN-HOLD
- ?PHN- LINESTATE
- ^PHN-PRIVACY
- ?PHN-PRIVACY
- ^PHN-REDIAL
- ^PHN- TRANSFER
- ^PHN-SETUP- DOMAIN
- ^PHN-SETUP- ENABLE
- ^PHN-SETUP- PASSWORD
- ^PHN-SETUP- PORT
- ^PHN-SETUP- PROXYADDR
- ^PHN-SETUP- STUNADDR
- ^PHN-SETUP- USERNAME
- Appendix A: Text Formatting
- Appendix B - Wireless Technology
- Appendix C: Troubleshooting