Andersen CB000106370 Intrusion Detector-400-DH Sensor User Manual
Andersen Corporation Intrusion Detector-400-DH Sensor Users Manual
Andersen >
Users Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2992210 |
| Application ID | eYCddWnZTLjQ4SdVtnoe9g== |
| Document Description | Users Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 138.76kB (1734439 bits) |
| Date Submitted | 2016-05-16 00:00:00 |
| Date Available | 2016-05-16 00:00:00 |
| Creation Date | 2016-03-08 12:38:55 |
| Producing Software | Adobe PDF Library 11.0 |
| Document Lastmod | 2016-03-08 12:39:31 |
| Document Title | Users Manual |
| Document Creator | Adobe InDesign CC 2014 (Macintosh) |
VeriLock® Security Sensor Lock Application VeriLock® Security Sensor Lock Application for Andersen® 400 Series Tilt-Wash, 400 Series Woodwright, and Renewal by Andersen Double-Hung Windows for Andersen® 400 Series Tilt-Wash, 400 Series Woodwright, and Renewal by Andersen Double-Hung Windows Thank you for choosing Andersen. / Gracias por elegir Andersen. For questions call 1-888-888-7020. For more information and/or guides visit andersenwindows.com. Please leave this guide with building owner. Si tiene alguna pregunta llame al 1-888-888-7020. Para obtener más información y/o guías, visite andersenwindows.com. Deje esta guía con el dueño de la construcción. ▶▶ Read guide from beginning to end before starting installation. Read all warnings and cautions during unit installation. Lea completamente la guía antes de comenzar la instalación. Lea y respete todas las advertencias y precauciones durante la instalación de la unidad. ▶▶ Check with your local building code official to identify and confirm compliance with local building code requirements. Consulte los códigos locales de construcción para identificar y confirmar que se cumplan los requisitos del código de construcción. Tools Needed Herramientas Necesarias ∙∙ Safety Glasses /Lentes de seguridad ∙∙ Phillips Screwdriver /Destornillador Phillips Parts Included / Partes Incluidas (1) (1) (4) (1) (1) VeriLock Lock / VeriLock Cerrojo Keeper / Keeper #8 x 1" Screw (color matched) / #8 x 1" Screw (color matched) CR-2025 Battery / CR-2025 Battery Battery Cap / Battery Cap 400 Series Woodwright 400 Series Woodwright (1) Dummy VeriLock Lock / Dummy VeriLock Lock (3) Keeper / Keeper (4) #8 x 1" Screw (color matched) / #8 x 1" Screw (color matched) #8 x 1" Screw Tornillo No. 8 x 1" #8 x 1" Screw Tornillo No. 8 x 1" 400 Series Woodwright 400 Series Woodwright Or/ Or Renewal by Andersen Or/ Or 400 Series Tilt-Wash 400 Series Tilt-Wash Additional Parts Required for Units with Two Locks Additional Parts Required for Units with Two Locks Renewal by Andersen Keeper Pestillo VeriLock Lock VeriLock Lock CR-2025 Battery CR-2025 Battery 400 Series Tilt-Wash 400 Series Tilt-Wash Keeper Pestillo Dummy VeriLock Lock Dummy VeriLock Lock Battery Cap Battery Cap Use caution when working at elevated heights and around unit openings. Follow manufacturers’ instructions for ladders and/or scaffolding. Failure to do so may result in injury or death. Sea cauteloso al trabajar en lugares elevados y cerca de las aberturas de la unidad. Siga las instrucciones del fabricante para el uso de escaleras y/o andamios. Si no lo hiciera, podrían producirse lesiones o la muerte. Follow manufacturers’ instructions for hand or power tools. Always wear safety glasses. Failure to do so may result in injury and/or product damage. Siga las instrucciones del fabricante para el uso de herramientas eléctricas o manuales. Utilice siempre gafas de seguridad. Si no lo hiciera, podrían producirse lesiones y/o daños al producto. “Andersen” and all other marks where denoted are trademarks of Andersen Corporation and its subsidiary. © 2016 Andersen Corporation. All rights reserved. “Andersen” y todas las demás marcas que aparezcan son marcas registradas de Andersen Corporation y su subsidiaria © 2016 Andersen Corporation. Todos los derechos reservados. 9 1 3 5 0 0 5 BA- 0 1 Revised 02/23/15 9 1 3 5 0 0 5 BA - 0 2 Revised 03/04/16 Batteries carry the risk of fire, explosion and burns. Do not recharge, disassemble, heat above 212 degrees F (100 degrees C) or incinerate. Dispose of used batteries promptly and properly. Keep away from children. Les piles représentent un risque d’incendie, d’explosion et de brûlures. Ne pas recharger, démonter, chauffer à une température excédant 100 degrés C (212 degrés F) ou incinérer. Éliminer les piles rapidement et de manière appropriée. Garder à l’écart des enfants. Magnetic field can be harmful to implanted medical device wearers. Keep magnets away from devices. Magnetic field can be harmful to implanted medical device wearers. Keep magnets away from devices. Batteries are small parts and, if swallowed, could pose a choking hazard to young children. Magnets are small parts and, if swallowed, could pose a choking hazard to young children. Los imanes son partes pequeñas que, en caso de ingesta, pueden representar un riesgo de asfixia para niños pequeños. Las baterías son partes pequeñas que, en caso de ingesta, pueden representar un riesgo de asfixia para niños pequeños. Battery Cap Battery Cap Interior Battery Battery VeriLock Lock VeriLock Lock Indicator Light Indicator Light (bottom view) (bottom view) (top view) (top view) Insert battery into VeriLock lock (+) facing out as shown. Indicator light will illuminate for one (1) second when battery is installed correctly. Position battery cap over battery with edges tightly sealed. Make sure all cap edges are sealed around the battery ring. Insert battery into VeriLock lock (+) facing out as shown. Indicator light will illuminate for one (1) second when battery is installed correctly. Position battery cap over battery with edges tightly sealed. Make sure all cap edges are sealed around the battery ring. 9135005 2 Interior Interior Keeper Keeper Lock Lock Remove existing keeper(s). Remove existing keeper(s). Remove existing lock(s). Remove existing lock(s). Interior #8 x 1" Screw Tornillo No. 8 x 1" Keeper Keeper Interior 400 Series Tilt-Wash Double-Hung shown. 400 Series Tilt-Wash Double-Hung shown. NOTE: VeriLock lock can be installed on the right or left side of units with two locks. NOTE: VeriLock lock can be installed on the right or left side of units with two locks. Interior color matched screws provided. Do not over tighten. Position VeriLock lock over existing holes and fasten using #8 x 1" color matched screws provided. Do not over tighten. For Units with Two Locks Only For Units with Two Locks Only #8 x 1" Screw Tornillo No. 8 x 1" Dummy VeriLock Lock Dummy VeriLock Lock Position dummy VeriLock lock on opposite side and fasten using #8 x 1" color matched screws provided. Do not over tighten. Position dummy VeriLock lock on opposite side and fasten using #8 x 1" color matched screws provided. Do not over tighten. 9135005 VeriLock Lock VeriLock Lock Position VeriLock lock over existing holes and fasten using #8 x 1" Position new keeper(s) over existing holes and fasten using #8 x 1" color matched screws provided. Do not over tighten. Position new keeper(s) over existing holes and fasten using #8 x 1" color matched screws provided. Do not over tighten. #8 x 1" Screw Tornillo No. 8 x 1" Verify VeriLock Sensor Function / Verify VeriLock Sensor Function Interior Locked Locked Unlocked Unlocked Indicator Light Indicator Light 1. 2. 3. 4. Raise lower sash. Indicator light will illuminate for one (1) second. Close lower sash so the lock aligns with the keeper. Indicator light will illuminate for one (1) second. Lock window. Indicator light will illuminate for one (1) second. Unlock window. Indicator light will illuminate for one (1) second. 1. 2. 3. 4. Raise lower sash. Indicator light will illuminate for one (1) second. Close lower sash so the lock aligns with the keeper. Indicator light will illuminate for one (1) second. Lock window. Indicator light will illuminate for one (1) second. Unlock window. Indicator light will illuminate for one (1) second. Indicator Light Indicator Light Verify VeriLock sensor function. If indicator light does not respond as described, verify sensor application. Verify VeriLock sensor function. If indicator light does not respond as described, verify sensor application. ▶▶ Procedure is complete. Procedure is complete. Refer to monitoring system of your choice for sensor enrollment. Refer to monitoring system of your choice for sensor enrollment. For maintenance information, please visit http://www.andersenwindows.com/verilock and consult with the VeriLock® user guide. For maintenance information, please visit http://www.andersenwindows.com/verilock and consult with the VeriLock® user guide. 9135005 Regulatory Statements / Normas reglamentarias Federal Communications Commission (FCC) Part 15 Statement This device complies with FCC Rules Part 15. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference that may be received, including interference that may cause undesired operation. Industry Canada (IC) RSS Statement This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: (1) I'appareil ne doit pas produire de brouillage; (2) I'utilisateur de I'appareil doit accepter tout brouillage radioélectrique subi, méme si le brouillage est susceptible d'en compromettre le fonctionnement. Changes or modifications not expressly approved by Andersen may void the user's authority to operate the equipment. 9135005
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03 Instance ID : uuid:1ea167f6-fd52-3440-b32a-65f43411488b Original Document ID : adobe:docid:indd:d0717119-dfee-11de-8e34-9beae8c19d6b Document ID : xmp.id:33487534-1a7a-41ab-a623-c0c5e92970bc Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:91d712c2-ffb1-47c5-a0c8-70342ddc41d7 Derived From Document ID : xmp.did:f4889252-4ebc-463c-9fac-19eb2201a165 Derived From Original Document ID: adobe:docid:indd:d0717119-dfee-11de-8e34-9beae8c19d6b Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CC 2014 (Macintosh) History Changed : / History When : 2016:03:08 12:38:55-06:00 Create Date : 2016:03:08 12:38:55-06:00 Modify Date : 2016:03:08 12:39:31-06:00 Metadata Date : 2016:03:08 12:39:31-06:00 Creator Tool : Adobe InDesign CC 2014 (Macintosh) Format : application/pdf Producer : Adobe PDF Library 11.0 Trapped : False Slug Family : Helvetica Slug Version : 001.004 Slug Outline File Size : 30185 Slug Kerning Checksum : 55007 Slug Foundry : Adobe Systems Slug Font Kind : PostScript Slug Checksum : 3285313313 Slug Post Script Name : Helvetica-Condensed Slug Font Sense 12 Checksum : 3285313313 Page Layout : SinglePage Page Mode : UseThumbs Page Count : 5 Creator : Adobe InDesign CC 2014 (Macintosh)EXIF Metadata provided by EXIF.tools