Andon Health 926 Wireless Blood Pressure Monitor User Manual MODEL KD 595

Download:
Mirror Download [FCC.gov]
Document ID	3245784
Application ID	HcnZ+SreXVkYyO1V3EWXmA==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	65.15kB (814360 bits)
Date Submitted	2017-01-04 00:00:00
Date Available	2017-01-04 00:00:00
Creation Date	2016-12-30 09:25:40
Producing Software	Microsoft? Office Word 2007
Document Lastmod	2016-12-30 09:25:40
Document Title	MODEL KD-595
Document Creator	Microsoft? Office Word 2007
Document Author:	0029

DN:KD-926-SMSY01 V1.0
Operation Guide
Operation Guide
(V1.0)
Product/project name：Blood Pressure Monitor
Model name：
KD-926
Project number：
Drafted
by:
Date
Reviewed by:
Date
Approved by:
Date
DN:KD-926-SMSY01 V1.0
Operation Guide
MODEL KD-926
Wireless Blood Pressure Monitor
(ELECTRONIC SPHYGMOMANOMETER)
OPERATION GUIDE
__________________________________________________________________________
INDEX
IMPORTANT INFORMATION ......................................................................... 2
CONTENTS AND DISPLAY INDICATORS ..................................................... 2
INTENDED USE .............................................................................................. 3
CONTRAINDICATION ..................................................................................... 3
PRODUCT DESCRIPTION .............................................................................. 3
SPECIFICATIONS ........................................................................................... 4
NOTICE ........................................................................................................... 4
SETUP AND OPERATING PROCEDURES .................................................... 6
1. DOWNLOAD THE FREE APP .................................................................... 6
2. BATTERY LOADING AND AC ADAPTER LOADING ................................ 6
3. CLOCK AND DATE ADJUSTMENT ........................................................... 7
4. CONNECTING THE CUFF TO THE MONITOR .......................................... 8
5. APPLYING THE CUFF ................................................................................ 8
6. BODY POSTURE DURING MEASUREMENT ............................................ 9
7. TAKING YOUR BLOOD PRESSURE READING ........................................ 9
8. DISPLAYING STORED RESULTS ........................................................... 10
9. SYNCHRONIZING STORED RESULTS ................................................... 10
10. DELETING MEASUREMENTS FROM THE MEMORY ........................... 11
11. ASSESSING HIGH BLOOD PRESSURE FOR ADULTS ....................... 11
12. TECHNICAL ALARM DESCRIPTION ..................................................... 12
13. TROUBLESHOOTING (1) ....................................................................... 12
14. TROUBLESHOOTING (2) ....................................................................... 13
MAINTENANCE ............................................................................................ 14
EXPLANATION OF SYMBOLS ON UNIT ..................................................... 14
WARRANTY INFORMATION ........................................................................ 15
SERVICE CENTER ....................................................................................... 15
IMPORTANT INFORMATION REQUIRED BY THE R&TTE ........................ 15
ELECTROMAGNETIC COMPATIBILITY INFORMATION ............................ 16
1/16
DN:KD-926-SMSY01 V1.0
Operation Guide
IMPORTANT INFORMATION
NORMAL BLOOD PRESSURE FLUCTUATION
All physical activity, excitement, stress, eating, drinking, smoking, body posture and many
other activities or factors (including taking a blood pressure measurement) will influence blood
pressure value. Because of this, it is mostly unusual to obtain identical multiple blood pressure
readings.
Blood pressure fluctuates continually day and night. The highest value usually appears in the
daytime and lowest one usually at midnight. Typically, the value begins to increase at around
3:00 AM, and reaches to highest level in the daytime while most people are awake and active.
Considering the above information, it is recommended that you measure your blood pressure
at approximately the same time each day.
Too frequent measurements may cause injury due to blood flow interference, please always
relax a minimum moment of 1 to 1.5 minutes between measurements to allow the blood
circulation in your arm to recover. It is rare that you obtain identical blood pressure readings
each time.
CONTENTS AND DISPLAY INDICATORS
2/16
DN:KD-926-SMSY01 V1.0
Operation Guide
INTENDED USE
Fully Automatic Electronic Blood Pressure Monitor is for use by medical professionals or at
home and is a non-invasive blood pressure measurement system intended to measure the
diastolic and systolic blood pressures and pulse rate of an adult individual by using a
non-invasive technique in which an inflatable cuff is wrapped around the upper arm.The cuff
circumference is limited to 22cm-42cm(approx.8 21/32″-16 17/32″).
CONTRAINDICATION
It is inappropriate for people with serious arrhythmia to use this Electronic
Sphygmomanometer.
PRODUCT DESCRIPTION
Based on Oscillometric methodology and silicon integrated pressure sensor, blood pressure
and pulse rate can be measured automatically and non-invasively. The LCD display will show
blood pressure and pulse rate. The most recent 2×60 measurements can be stored in the
memory with date and time stamp. The Electronic Sphygmomanometer corresponds to the
below standards:
IEC 60601-1:2005 +A1:2012(E)/EN 60601-1：2006/A11: 2011 (Medical
electrical equipment -- Part 1: General requirements for basic safety and essential
performance), IEC60601-1-2:2007/EN 60601-1-2:2007 /AC:2010 (Medical electrical
equipment -- Part 1-2: General requirements for basic safety and essential performance Collateral standard: Electromagnetic compatibility - Requirements and tests),
IEC80601-2-30:2009+AMD1：2013/EN 80601-2-30:2010/A1：2015(Medical electrical
equipment –Part 2-30: Particular requirements for the basic safety and essential performance
of automated non-invasive sphygmomanometers)EN 1060-1: 1995 + A2: 2009
(Non-invasive sphygmomanometers - Part 1: General requirements), EN 1060-3: 1997 + A2:
2009 (Non-invasive sphygmomanometers - Part 3: Supplementary requirements for
electro-mechanical blood pressure measuring systems).
3/16
DN:KD-926-SMSY01 V1.0
Operation Guide
SPECIFICATIONS
1. Product name: Wireless Blood Pressure Monitor
2. Model: KD-926
3. Classification: Internally powered, Type BF applied part,IP20,No AP or APG, Continuous
operation
4. Machine size: Approx. 145 mm ×90 mm × 51mm
5. Cuff circumference: 8-21/32” to 16-17/32”(22cm-42cm)
6. Weight: Approx. 234g (8 1/4oz.) (exclude cuff)
7. Measuring method: Oscillometric method, automatic inflation and measurement
8. Memory volume: 2×60 times with time and date stamp
9. Power source: batteries: 4x1.5V
10. Measurement range:
SIZE AA, DC 6V 600mA
Cuff pressure: 0-300mmHg
Systolic:
60-260mmHg
Diastolic:
40-199mmHg
Pulse rate:
40-180 beats/minute
11. Accuracy:
Pressure:
±3mmHg
Pulse rate:
±5%
12. Environmental temperature for operation: 10°C-40°C(50°F -104°F)
13. Environmental humidity for operation: ≤85%RH
14. Environmental temperature for storage and transport: -20℃～50℃(-4℉～122℉)
15. Environmental humidity for storage and transport: ≤85%RH
16. Environmental pressure: 80kPa-105kPa
17. Battery life: Approx 300 times.
18. Wireless Connection:
Smart Bluetooth
Frequency Band: 2.400~2.4835GHz
19. All components belonging to the pressure measuring system, including: Pump,Valve, LCD,
Cuff, Sensor
Note: These specifications are subject to change without notice.
NOTICE
1. Read all of the information in the operation guide and any other literature in the box before
operating the unit.
2. Stay still, calm and rest for 5 minutes before blood pressure measurement.
3. The cuff should be placed at the same level as your heart.
4. During measurement, neither speak nor move your body and arm.
5. Measuring on same arm for each measurement.
6. Please always relax at least 1 or 1.5 minutes between measurements to allow the blood
circulation in your arm to recover. Prolonged over-inflation (cuff pressure exceed 300
mmHg or maintained above15 mmHg for longer than 3 minutes) of the bladder may cause
ecchymoma of your arm.
7. Consult your physician if you have any doubt about below cases:
4/16
DN:KD-926-SMSY01 V1.0
Operation Guide
1) The application of the cuff over a wound or inflammation diseases;
2) The application of the cuff on any limb where intravascular access or therapy, or an
arterio-venous (A-V) shunt, is present;
3) The application of the cuff on the arm on the side of a mastectomy;
4) Simultaneously used with other monitoring medical equipments on the same limb;
5) Need to check the blood circulation of the user.
8.
This Electronic Sphygmomanometer is designed for adults and should never be used
on infants or young children. Consult your physician or other health care professionals
before use on older children.
9. Do not use this unit in a moving vehicle, This may result in erroneous measurement.
10. Blood pressure measurements determined by this monitor are equivalent to those
obtained by a trained observer using the cuff/stethoscope auscultation method, within the
limits prescribed by the American National Standard Institute, Electronic or automated
sphygmomanometers.
11. Information regarding potential electromagnetic or other interference between the blood
pressure monitor and other devices together with advice regarding avoidance of such
interference please see part ELECTROMAGNETIC COMPATIBILITY INFORMATION.
12. If Irregular Heartbeat (IHB) brought by common arrhythmias is detected in the procedure
of blood pressure measurement, a signal of
will be displayed. Under this condition,
the Electronic Sphygmomanometer can keep function, but the results may not be accurate,
it’s suggested that you consult with your physician for accurate assessment.
There are 2 conditions under which the signal of IHB will be displayed:
1) The coefficient of variation (CV) of pulse period >25%.
2) The difference of adjacent pulse period≥0.14s, and the number of such pulse takes
more than 53 percentage of the total number of pulse.
13. Please do not use the cuff other than supplied by the manufacturer, otherwise it may bring
biocompatible hazard and might result in measurement error.
14.
The monitor might not meet its performance specifications or cause safety hazard if
stored or used outside the specified temperature and humidity ranges in specifications.
15.
Please do not share the cuff with other infective person to avoid cross-infection.
16. This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
5/16
DN:KD-926-SMSY01 V1.0
Operation Guide
—Consult the dealer or an experienced radio/TV technician for help.
17. Medical AC adapter which output is DC 6.0V 600mA and complied with IEC 60601-1/EN
60601-1/UL 60601-1 and IEC 60601-1-2/EN 60601-1-2/UL 60601-1-2 is suitable for this
monitor. Please note that the monitor jack size: hole Φ5.5mm, center pin Φ2.0mm. Please
pay attention to polarity.
18. Measurements are not possible in patients with a high frequency of arrhythmias.
19. The device is not intended for use on neonates, children or pregnant women. (Clinical
testing has not been conducted on neonates, children or pregnant women.)
20. Motion, trembling, shivering may affect the measurement reading.
21. The device would not apply to the patients with poor peripheral circulation, noticeably low
blood pressure, or low body temperature (there will be low blood flow to the measurement
position).
22. The device would not apply to the patients who use an artificial heart and lung (there will
be no pulse)
23. Consult your physician before using the device for any of the following conditions:
common arrhythmias such as atrial or ventricular premature beats or atrial fibrillation,
arterial sclerosis, poor perfusion, diabetes, pre-eclampsia, enal diseases.
SETUP AND OPERATING PROCEDURES
1. DOWNLOAD THE FREE APP
Prior to first use, download and install the Andon App from the App Store(iOS device) or
Google Play(Android device). Use keyword search terms ”mHealth”.
2. BATTERY LOADING AND AC ADAPTER LOADING
a. Open battery cover at the back of the monitor.
b. Load four “AA” size batteries. Please pay attention to polarity.
c.
Close the battery cover.
When LCD shows battery symbol , replace all batteries with new ones.
Rechargeable batteries are not suitable for this monitor.
Remove the batteries if the monitor will not be used for a month or more to avoid
relevant damage of battery leakage.
Avoid the battery fluid to get in your eyes. If it should get in your eyes, immediately
rinse with plenty of clean water and contact a physician.
d. If you use the AC adapter, please make sure the monitor turn off or no batteries. Put
the connector plug of the adapter into the socket as the picture, Then plug the adapter
to AC outlet. When disconnect the AC Adapter:
Remove the AC Adapter from the electrical outlet;
Remove the AC Adapter plug from the monitor socket.
Do not plug or unplug the power cord into the electrical outlet with wet hands.
Do not overload power outlets. Plug the device into the appropriate voltage outlet.
If the AC adapter is abnormal, please change the adapter.
Do not pull out the adapter when you are using the monitor.
6/16
DN:KD-926-SMSY01 V1.0
Operation Guide
Do not use any other type of AC adapter as it may harm the monitor.
The monitor, the batteries and the cuff, must be disposed of according to local
regulations at the end of their usage.
3. CLOCK AND DATE ADJUSTMENT
a. Once you install the battery,the Blood Pressure Monitor will enter Clock and Date
Adjustment Mode. When you turn off the monitor, it will enter Clock Mode, and
LCD will display time and date.
b. While the monitor is in Clock Mode , adjustment can be reached by pressing both
the “START/STOP” and “MEM” button for 1 seconds in Clock Mode to change the
time.See picture3.
c.
In Clock and Date Adjustment Mode , the time format will blink at first , see
picture3-1 .The default time format is 24h(Europe Version) and the default clock
and date is 2016-1-1 12:00.
d. Press the button “START/STOP” repeatedly, the year (first usage: default is 2016,
range is 2016~2099), month, day, hour and minute will blink in turn, see picture32&3-3 & 3-4 & 3-5 & 3-6. While the number is blinking, press the button “MEM” to
increase the number, keep on pressing the button "MEM", the number will
increase faster.
Picture 3
Picture 3-4
Picture 3-1
Picture 3-5
Picture 3-2
Picture 3-3
Picture 3-6
e. During adjusting clock and date, the monitor will go back to Clock Mode
automatically when no button will be pressed within 60 seconds.
f.
You can turn off the monitor by pressing “START/STOP” button when the minute
is blinking, then the time and date is confirmed.
Note:
3.1 The clock format could be set by user.
7/16
DN:KD-926-SMSY01 V1.0
Operation Guide
3.2 Table 1 instructs the conversion relations between 24 hour format and 12 hour
format.
Table 1
24 hour format
12 hour format
24 hour format
12 hour format
0:00
12:00 AM
12:00
12:00 PM
1:00
1:00 AM
13:00
1:00 PM
2:00
2:00 AM
14:00
2:00 PM
3:00
3:00 AM
15:00
3:00 PM
4:00
4:00 AM
16:00
4:00 PM
5:00
5:00 AM
17:00
5:00 PM
6:00
6:00 AM
18:00
6:00 PM
7:00
7:00 AM
19:00
7:00 PM
8:00
8:00 AM
20:00
8:00 PM
9:00
9:00 AM
21:00
9:00 PM
10:00
10:00 AM
22:00
10:00 PM
11:00
11:00 AM
23:00
11:00 PM
4. CONNECTING THE CUFF TO THE MONITOR
Insert the cuff tubing connector into the air port in the side of the monitor.
Make sure that the connector is completely inserted to avoid air leakage
during blood pressure measurements.
Avoid compression or restriction of the connection tubing during measurement，
which may cause inflation error, or harmful injury due to continuous cuff pressure.
5. APPLYING THE CUFF
a.
Pulling the cuff end through the medal loop (the cuff is packaged like
this already), turn it outward (away from your body) and tighten it and
close the Velcro fastener.
b.
Place the cuff around a bare left arm 1-2cm above the elbow joint.
c.
While seated, place palm upside in front of you on a flat surface
such as a desk or table. Position the air tube in the middle of your
arm in line with your middle finger.
d.
The cuff should fit comfortably, yet snugly around your arm.You
should be able to insert one finger between your arm and the cuff.
Note:

Please refer to the cuff circumference range in “SPECIFICATIONS” to make
sure that the appropriate cuff is used.

Measure on the left arm each time.
8/16
DN:KD-926-SMSY01 V1.0

Operation Guide
Do not move your arm, body, or the monitor and do not move the rubber
tube during measurement.

Stay quiet, calm for 5 minutes before blood pressure measurement.

Please keep the cuff clean. If the cuff becomes dirty, remove it from the
monitor and clear it by hand in a mild detergent, then rinse it thoroughly in
cold water. Never dry the cuff in clothes dryer or iron it. Clean the cuff after
the usage of every 200 times is recommended.
6. BODY POSTURE DURING MEASUREMENT
Sitting Comfortably Measurement
a. Be seated with your feet flat on the floor, and don’t cross your legs.
b. Place palm upside in front of you on a flat surface such as desk or
table.
c.
The middle of the cuff should be at the level of the right atrium of the heart.
Lying Down Measurement
a. Lie on your back.
b. Place your left arm straight along your side with your palm upside.
c.
The cuff should be placed at the same level as your heart.
7. TAKING YOUR BLOOD PRESSURE READING
a. After applying the cuff and your body is in a comfortable position, press the
“START/STOP” button. All display characters are shown for self-test. You can
check the LCD display according to the right picture. Please contact the service
center if segment is missing.See picture 7-1.
b. Then the current memory bank ( or ) is blink. See picture 7-2. Press “MEM”
button to change over to other bank. See picture 7-3. Confirm your selection by
pressing “START” button. The current bank can also be confirmed automatically
after 5 seconds with no operation.
Picture 7-1
c.
Picture 7-2
Picture 7-3
Picture 7-4
Picture 7-5
After selecting the memory bank, the monitor starts to seek zero pressure. See
picture 7-4.
d. Then the cuff will be slowly inflated. The blood pressure and pulse will be
measured during inflation. Inflation will stop as soon as the blood pressure and
pulse rate have been calculated and displayed on the LCD. The irregular
9/16
DN:KD-926-SMSY01 V1.0
Operation Guide
heartbeat symbol (if any) and blood pressure classification indicator will blink on
the LCD. See picture 7-5. The result will automatically be stored in the Memory
bank of the monitor.
e. After measurement, the monitor will turn off automatically after 1 minute of no
operation.
f.
During measurement, you can press the “START/STOP” button to turn off the
monitor manually.
Note: Please consult a health care professional for interpretation of pressure measurements.
8. DISPLAYING STORED RESULTS
a. In Clock Mode, press “MEM” button, the monitor will display sign of current group.The
amount of results in current user memory zone will be displayed. See picture 8.Press
“START/STOP” button to switch group, press “MEM” to confirm current group.
b. Then LCD will display the average value of the last three results in this bank. See
picture 8-1. If no result stored, LCD will show picture 8-2.
c. Press “MEM” button, the LCD will display the average value of all results in the current
user memory zone. See picture 8-3. If no result stored in the current user memory
zone, LCD will display “0” for blood pressure and pulse rate. See picture 8-4.
d. Press “MEM” button again, the most recent result will be displayed with date and time
stamp. See picture 8-5. Irregular heartbeat symbol (if any) and blood pressure
classification indicator will blink at the same time. If the monitor has no result stored in
the current user memory zone, the LCD will display “0” for blood pressure and pulse
rate. See picture 8-6.
e. Press “MEM” button again to review the next result. In this way, repeatedly pressing
the “MEM” button displays the respective results measured previously.
Picture8
Picture 8-1
Picture 8-2
Picture 8-4
Picture 8-5
Picture 8-3
Picture 8-6
Note: When the monitor displaying the measurement, the classification color indicator
10/16
DN:KD-926-SMSY01 V1.0
Operation Guide
can be shown different color according to the systolic pressure and diastolic
pressure. Refer to the “ASSESSING HIGH BLOOD PRESSURE FOR ADULTS”
section.
9. SYNCHRONIZING STORED RESULTS
a. In Clock Mode, press “MEM” button, the monitor will wait Bluetooth connect and
Bluetooth symbol flashing after confirming the group. See picture 8-1. Bluetooth
symbol will stop flashing when Bluetooth is connected. Send symbol flashing until
Synchronize finished. See picture 8-3. Send symbol flashing means it is synchronizing
the memory at this time.
b. If an accident happens, synchronous unfinished, unfinished symbol flashing. See
picture 8-5.
c. When Bluetooth is disconnected, the monitor will turn off automatically after 1 minute
of no operation. You can also press the “START/STOP” button to turn off the monitor
manually.
10. DELETING MEASUREMENTS FROM THE MEMORY
When any result is displaying (exclude average value displaying), keeping on pressing
button “MEM” for three seconds, all results in the current bank will be deleted . See picture
10. Press the button “START/STOP”, the monitor will be turned off.
Picture 10
11. ASSESSING HIGH BLOOD PRESSURE FOR ADULTS
The following guideline for assessing high blood pressure (without regard to age or gender)
has been established by the World Health Organization (WHO).
Please note that other
factors (e.g. diabetes, obesity, smoking, etc.) need to be taken into consideration. Consult with
your physician for accurate assessment, and never change your treatment by yourself.
11/16
DN:KD-926-SMSY01 V1.0
Operation Guide
Note: It is not intended to provide a basis of any type of rush toward emergency
conditions/diagnosis based on the color scheme and that the color scheme is meant only to
discriminate between the different levels of blood pressure.
12. TECHNICAL ALARM DESCRIPTION
The monitor will show 'HI' or 'Lo' as technical alarm on LCD with no delay if the determined
blood pressure (systolic or diastolic) is outside the rated range specified in part
SPECIFICACIONS. In this case, you should consult a physician or check if your operation
violated the instructions.
The technical alarm condition (outside the rated range) is preset in the factory and cannot be
adjusted or inactivated. This alarm condition is assigned as low priority according to IEC
60601-1-8.
The technical alarm is non-latching and need no reset. The signal displayed on LCD will
disappear automatically after about 8 seconds.
13. TROUBLESHOOTING (1)
PROBLEM
POSSIBLE CAUSE
SOLUTION
The cuff position was not correct or
Apply the cuff correctly and try
it was not properly tightened
again.
Review the “BODY POSTURE
Body posture was not correct during
DURING
testing
sections of the instructions and
LCD Display shows
abnormal result
MEASUREMENT”
re-test.
Speaking, arm or body movement,
Re-test when calm and without
angry, excited or nervous during
speaking or moving during the
testing
test.
It is inappropriate for people with
Irregular heartbeat (arrhythmia)
serious arrhythmia to use this
Electronic Sphygmomanometer.
12/16
DN:KD-926-SMSY01 V1.0
Operation Guide
14. TROUBLESHOOTING (2)
PROBLEM
POSSIBLE CAUSE
SOLUTION
LCD shows low battery
Low Battery
Change the batteries
symbol
LCD shows “Er 0”
Pressure system is unstable
before measurement
LCD shows “Er 1”
Fail to detect systolic pressure
LCD shows “Er 2”
Fail to detect diastolic pressure
LCD shows “Er 3”
Pneumatic system blocked or cuff
LCD shows “Er 4”
Don’t move and try again.
is too tight during inflation
Apply the cuff correctly and
Pneumatic system leakage or
try again
cuff is too loose during inflation
LCD shows “Er 5”
Cuff pressure above 300mmHg
LCD shows “Er 6”
More than 3 minutes with cuff
Measure again after five
pressure above 15 mmHg
minutes. If the monitor is
LCD shows “Er 7”
EEPROM accessing error
still abnormal, please
LCD shows “Er 8”
Device parameter checking error
contact the local distributor
LCD shows “Er A”
Pressure sensor parameter error
or the factory.
No response when you
Incorrect operation or strong
Take out batteries for five
press button or load
electromagnetic interference.
minutes, and then reinstall
battery.
all batteries.
Reset iOS/Android device.
Bluetooth connection
Bluetooth
unsuccessful, monitor is
connection
abnormal, or strong
unstable
electromagnetic interference is
present
Reset monitor. Make sure
the monitor and
iOS/Android device are
away from other electrical
equipment. Please see
GENERAL SAFETY AND
PRECAUTIONS
13/16
DN:KD-926-SMSY01 V1.0
Operation Guide
MAINTENANCE
1.
Do not drop this monitor or subject it to strong impact.
2.
Avoid high temperature and solarization. Do not immerse the monitor in water as this
will result in damage to the monitor.
3.
If this monitor is stored near freezing, allow it to acclimate to room temperature before
use.
4.
5.
Do not attempt to disassemble this monitor.
If you do not use the monitor for a long time, please remove the batteries.
6.
It is recommended the performance should be checked every 2 years or after repair.
Please contact the service center.
7.
Clean the monitor with a dry, soft cloth or a soft cloth squeezed well after moistened with
water, diluted disinfectant alcohol, or diluted detergent.
8.
No component can be maintained by user in the monitor. The circuit diagrams,
component part lists, descriptions, calibration instructions, or other information which will
assist the user’s appropriately qualified technical personnel to repair those parts of
equipment which are designated repairably can be supplied by us.
9.
The monitor can maintain the safety and performance characteristics for a minimum of
10,000 measurements or three years, and the cuff integrity is maintained after 1,000
open–close cycles of the closure.
10. It is recommended the cuff should be disinfected 2 times every week if needed (For
example, in hospital or in clinique). Wipe the inner side (the side contacts skin) of the cuff
by a soft cloth squeezed after moistened with Ethyl alcohol (75-90%), then dry the cuff by
airing.
EXPLANATION OF SYMBOLS ON UNIT
Symbol for” THE OPERATION GUIDE MUST BE READ”(The sign background colour:
blue.The sign graphical symbol: white)
Symbol for “WARNING”
Symbol for “TYPE BF APPLIED PARTS” (The cuff is type BF applied part)
Symbol for “ENVIRONMENT PROTECTION – Waste electrical products should not be
disposed of with household waste. Please recycle where facilities exist. Check with your local
Authority or retailer for recycling advice”.
Symbol for “MANUFACTURER”
Symbol for “COMPILES WITH MDD93/42/EEC REQUIREMENTS”
Symbol for “DATE OF MANUFACTURE”
14/16
0197
A N D O N H e a lth C o .,Ltd
N O .31,C h a n DN:KD-926-SMSY01
g jia n g R o a d ,N aV1.0
n ka iD istric t,Tia n jin ,P.R.C h in a
Lotus
Global
Co.,Ltd
EC REP
Operation Guide
47 Spenlow
Bermondsey
London SE16 4SJ
Symbol forHouse
“EUROPEAN
REPRESENTATION”
SN
Symbol for “SERIAL NUMBER”
Symbol for “KEEP DRY”
A U TO M A TIC BLO O D PRESSU RE M O N ITO R
WARRANTY INFORMATION
of components and transport.
MOnly
O charge
D EL:the
KD cost
-5907
6V
SN
SERVICE
CENTER
ANDON HEALTH CO., LTD.
0197
No. 3 Jinping Street, YaAn Road, Nankai District, Tianjin 300190, China.
Tel:
A N D86-22-60526081
O N H e a lth C
o .,Ltd
N O .31,C h a n g jia n g R o a d ,N a n ka iD istric t,Tia n jin ,P.R.C h in a
Lotus
Co.,Ltd
LotusGlobal
Global Co.,
Ltd.
EC REP
471 Four
Spenlow
House Bermondsey London SE16 4SJ
Seasons Terrace West Drayton, Middlesex, London, UB7 9GG,United
Kingdom
Tel: +0044-20-75868010 Fax: +0044-20-79006187
IMPORTANT INFORMATION REQUIRED BY THE R&TTE
This product is approved in accordance to R&TTE directive transmitter.
interference
This product complies with Industry Canada. IC: RSS-247
IC NOTICE
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is sub
ject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired
operation of the device.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, In
c and any use of such marks by ANDON HEALTH CO., LTD. is under license.
Other trademarks and trade names are those of their respective owners.
This product is approved in accordance to R&TTE directive transmitter.
Hereby, ANDON HEALTH CO., LTD., declares that this KD-926 is in compliance with the
essential requirements and other relevant provisions of Directive 1999/5/EC. See part
Directive 1999/5/EC declaration of conformity
15/16
DN:KD-926-SMSY01 V1.0
Operation Guide
ELECTROMAGNETIC COMPATIBILITY INFORMATION
Table 1 - Emission
Phenomenon
Compliance
Electromagnetic environment
RF emissions
CISPR 11
Group 1, Class B
Home healthcare environment
Harmonic distortion
IEC 61000-3-2
Class A
Home healthcare environment
Voltage fluctuations
and flicker
IEC 61000-3-3
Compliance
Home healthcare environment
Table 2 - Enclosure Port
Phenomenon
Basic EMC standard
Electrostatic
Discharge
IEC 61000-4-2
Radiated RF EM field
IEC 61000-4-3
Proximity fields from
RF
wireless
communications
equipment
Rated
power
frequency magnetic
fields
Immunity test levels
Home Healthcare Environment
±8 kV contact
±2kV, ±4kV, ±8kV, ±15kV air
10V/m
80MHz-2.7GHz
80% AM at 1kHz
Refer to table 3
IEC 61000-4-3
30A/m
50Hz or 60Hz
IEC 61000-4-8
Table 3 – Proximity fields from RF wireless communications equipment
Test frequency
(MHz)
385
450
710
745
780
810
870
930
1720
1845
1970
2450
5240
5500
5785
Band
(MHz)
Immunity test levels
380-390
430-470
704-787
Professional healthcare facility environment
Pulse modulation 18Hz, 27V/m
FM, ±5kHz deviation, 1kHz sine, 28V/m
Pulse modulation 217Hz, 9V/m
800-960
Pulse modulation 18Hz, 28V/m
1700-1990
Pulse modulation 217Hz, 28V/m
2400-2570
5100-5800
Pulse modulation 217Hz, 28V/m
Pulse modulation 217Hz, 9V/m
16/16
DN:KD-926-SMSY01 V1.0
Operation Guide
Table 4
For ME EQUIPMENT and ME SYSTEMS that are not LIFE-SUPPORTING
Recommended separation distances between
portable and mobile RF communications equipment and the KD-926
The KD-926 is intended for use in an electromagnetic environment in which radiated RF
disturbances are controlled. The customer or the user of the KD-926 can help prevent
electromagnetic interference by maintaining a minimum distance between portable and mobile
RF communications equipment (transmitters) and the KD-926 as recommended below,
according to the maximum output power of the communications equipment.
Rated maximum
Separation distance according to frequency of transmitter
output
power of
transmitter
150 kHz to 80 MHz
80 MHz to 800 MHz
d  1.2 P
800 MHz to 2,5 GHz
d  1.2 P
d  2.3 P
0,01
0.12
0.12
0.23
0,1
0.38
0.38
0.73
1.2
1.2
2.3
10
3.8
3.8
7.3
100
12
12
23
For transmitters rated at a maximum output power not listed above, the recommended
separation distance d in meters (m) can be determined using the equation applicable to the
frequency of the transmitter, where P is the maximum output power rating of the transmitter in
watts (W) according to the transmitter manufacturer.
NOTE 1 At 80 MHz and 800 MHz, the separation distance for the higher frequency range
applies.
NOTE 2 These guidelines may not apply in all situations. Electromagnetic propagation is
affected by absorption and reflection from structures, objects and people.
17/16
DN:KD-926-SMSY01 V1.0
Operation Guide
FCC Caution.
Any Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device
can be used in portable exposure condition without restriction.
18/16

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 19
Language                        : zh-CN
Tagged PDF                      : Yes
Title                           : MODEL KD-595
Author                          : 0029
Creator                         : Microsoft? Office Word 2007
Create Date                     : 2016:12:30 09:25:40+08:00
Modify Date                     : 2016:12:30 09:25:40+08:00
Producer                        : Microsoft? Office Word 2007

EXIF Metadata provided by EXIF.tools