Andrew Wireless System M717E19P ION-M Remote Unit for cellular systems User Manual ION M7P 17EP 19P M2 Cabinet PA 110265 EN GB indd

Andrew Wireless System ION-M Remote Unit for cellular systems ION M7P 17EP 19P M2 Cabinet PA 110265 EN GB indd

data seet

PRODUCT SPeCifiCaTiOnmultiple operators to use multiple technolo-gies and move their signals simultaneously from a cluster of base station to a number of remote locations over the same fiber. The ION-M optical distribution system is a cost-effective coverage solution for dense urban areas, tunnels, subways, airports, convention centers, high-rise buildings and other locations where physical structures increase path loss.The combination of these units gives maxi-mum flexibility while providing a scalable solution. The system is optimized for GSM, LTE, CDMA and WCDMA signals in the 700 MHz, 1900 MHz and 1700/2100 MHz bands. Furthermore it is provisioned for future modulation schemes and frequency bands.The ION can be easily set-up and super-vised from a graphical user interface (GUI). Remote units are commissioned through the use of built-in test equipment. An auto level-ling function compensates for the optical link loss making installation easy and quick.The entire system as well as complete net-work of systems can be managed remotely most efficiently by Commscope`s A.I.M.O.S, which includes alarm monitoring, task auto-mation, statistics, inventory management and ION-M7P/17EP/19Pmany more features. Should a sophisticated interface not be required, the master unit can be directly connected to the alarm interface of a base station via its contact relay.• Reduced visual impact form factor• Optimized power consumption• Efficient, high power amplifier• Multi-operator support• Complete operations and management system for configuration and alarming• OMC with SNMP according to X.733 standard• With reference to 3GPP TS25.143/TS25.106/ 36.143/TS36.106 and 3GPP2C.S0051-0• Single fiber for multiple bands and multiple remotes• Easy installation and commissioningCommScope’s ION-M7P/17EP/19P is a multi-band, multi-operator remote unit configuration used in conjunction with a master unit in the ION optical distribution system. By supporting the entire AWS-3 spectrum, faster and more reliable wireless service is ensured and network quality can be improved.This system transports up to four fre-quency bands simultaneously (700 MHz, 1700/2100 MHz, 1900 MHz), providing a cost-effective solution for distributing capac-ity from one or more base stations.The ION system transports signals on the RF layer in a very cost-effective manner enabling ION® is the unified platform for all conceivable optical distribution scenarios.The ION optical distribution system leads the industry in flexibility while minimizing overall deployment cost. Multi-band, Multi-operator Remote Optical SystemSupport of AWS-3 SpectrumION® Series
SPECIFICATIONSION-M7P/17EP/19P - Product Specification ElectricalMains power, Vac ................nominal..............100 to 240 ................operating .............85 to 264Mains power, Vdc ................nominal..............48 to 60 ................operating .............36 to 72Power consumption, Watts..................850OpticalOptical Link Connectors ..................E2000/APC 8°Optical return loss, dB ......................45Fibre type ..................................Single mode E9/125 µmOptical link budget, dB .....................0 to 10Composite input power @ OTRx master side, dBm ................700 MHz .............3.0 nominal ................AWS1700/2100 .........3.0 / 2.5 nominal ................PCS1900 .............3.0 / 2.5 nominalInterfaceBTS Side (SMA) Number of connectors ...Standard ................700 MHz .............4 ................AWS1700/2100 .........4 ................PCS1900 .............4System optimized for BTS power, dBm ..................................33 ..................................46Antenna port Connector ..................................4.3-10 RF output power ............................see band specification Return loss, dB ..............................15 Commercial 700 MHzFrequency range, MHz ................Uplink ..............698 to 716 ..................................776 to 787 ................Downlink .............728 to 757RF output power per carrier, dBm***Number of Carriers 1 2 4 8 LTE 43 40* 37 34DL output tolerance over frequency, dB.........±1 DL output tolerance over temperature, dB .......±0.5Spurious emission...........................<-13 dBm / 1 MHzInput ICP3, dBm** ................ICP3 optimized ..........-11 min. ................Noise figure optimized ......-18 min.Noise figure, dB** ................ICP3 optimized ..........+10 max. ................Noise figure optimized ......+6 max. ..................................4.5AWS1700/2100Frequency range, MHz ................Uplink ..............1710 to 1780 ................Downlink .............2110 to 2180RF output power per carrier, dBm***Number of Carriers 1 2 4 8 CDMA 42.5 39.5 36.5 33.5 LTE 43 40* 37 34 UMTS 42.5 39.5 36.5 33.5DL output tolerance over frequency, dB.........±1.1 DL output tolerance over temperature, dB .......±0.5Spurious emission...........................<-13 dBm / 1 MHzInput ICP3, dBm** ................ICP3 optimized ..........-12 min. ................Noise figure optimized ......-18 min.Noise figure, dB** ................ICP3 optimized ..........+11 max. ................Noise figure optimized ......+6 max. ..................................4.5* 2 dB reduction of Pout @ carrier bandwidth < 5 MHz ** from Reference point B to A *** PAR 7.5 dB @ 0.1 %All figures are typical values unless otherwise stated
SPECIFICATIONSPCS1900Frequency range, MHz ................Uplink ..............1850 to 1915 ................Downlink ............1930 to 1995RF output power per carrier, dBm***Number of Carriers 1 2 4 8 GSM 43 40 37 34 CDMA 42.5 39.5 36.5 33.5 LTE 43 40* 37 34 UMTS 42.5 39.5 36.5 33.5DL output tolerance over frequency, dB ........±1.1 DL output tolerance over temperature, dB .......±0.5Spectrum emission mask .. . . . . . . . . . . . . . . . . . <-13 dBm / 1 MHzInput ICP3, dBm** ................ICP3 optimized..........-12 min. ................Noise figure optimized......-18 min.Noise figure, dB** ................ICP3 optimized..........+11 max. ................Noise figure optimized......+6 max. ..................................4.5System Supervision and ControlCommands .................................RF on/off ..................................4 external control portsAlarms ..................................Summary ..................................Power Supply ..................................Optical UL and DL ..........................................failure ..................................RF UL and DL failure ..................................Temperature ..................................4 external alarm inputsSupervision .................................Composite output ..........................................powerION-M7P/17EP/19P - Product Specification Mechanical****Height, width, depth, mm (in)................824 x 176 x 220 ..........................................(32.4 x 6.9 x 8.7)Weight, kg (Ib) .............................27 (59.4)EnvironmentalOperating temperature range, °C.............-33 to +50Ingress protection RF part ............IP67 Fan part ...........IP55Minimum SW Requirements for Basic SupportION-M SW V7.0.1Ordering InformationION-M7P/17EP/19P . . . . . ..................7714179***** Depending on the selected options and the configuration the ordering material number contains an identifying suffix.Extension Unit OptionsNo connection to extension unit possible.Corresponding Master Unit OTRxOTRx 70-85/90/17-21 MU-G ..............7604304-XX* 2 dB reduction of Pout @ carrier bandwidth < 5 MHz ** from Reference point B to A *** PAR 7.5 dB @ 0.1 % **** Spacing required 50 mm (1.97 in) around unit ***** Subpopulations possibleAll figures are typical values, unless otherwise stated.
SPECIFICATIONSwww.commscope.comVisit our Web site or contact your local Commscope representative for more information. © 2016 Commscope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks or trademarks, respectively, of Commscope, Inc. This document is for planning purposes only and is not intended to modify or supplement any specifications or warranties relating to Commscope products or services.CommScope reserves the right to change all hardware and software characteristics without notice.ION-M7P/17EP/19P - Product Specification Gain DL Gain ULICP3 optimizedNF optimizedICP3 optimizedNF optimized700 MHz 40 dB 40 dB 40 dB 47 dBPCS1900 40 dB 40 dB 39 dB 46 dBAWS1700/2100 40 dB 40 dB 40 dB 47 dBDesign Principle ION SystemBulletin PA-110265-EN.GB (05/16)WARNING: This is NOT a CONSUMER device. It is designed for installation by FCC LICENSEES and QUALIFIED INSTALLERS. You MUST have an FCC LICENSE or express consent of an FCC LICENSE to operate this device. Unauthorized use may result in significant forfeiture penalties, including penalties in excess of $ 100,000 for each continuing violation.ION-M7P/17EP/19P Remote Unit Design Principle - Combined Antenna Port

Navigation menu