Angelcare Canada AC423R 900MHz Superheterodyne Receiver (Parent Unit) User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2162571
Application ID	7Mr2YO2S2FDZSvs7+v5FBg==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	108.13kB (1351640 bits)
Date Submitted	2014-01-10 00:00:00
Date Available	2014-01-10 00:00:00
Creation Date	2013-12-19 14:36:29
Producing Software	Acrobat Distiller 10.1.1 (Windows)
Document Lastmod	2013-12-19 14:36:29
Document Title	10Am1_User_guide_AC423_Germany_11807_revised_20131219.pdf
Document Creator	Adobe InDesign CC (Macintosh)
Document Author:	Administrator

FOR YOUR PEACE OF MIND
OWNER’S MANUAL
SOUND MONITOR
Model AC423
EN
DE
XX
XX
XX
XX
XX
XX
XX
XX
XX
TABLE OF CONTENT
Warnings ..................................................................................................... 3
AC423 SETUP REQUIREMENTS........................................................7
STEP 1 - Charge Parent Unit ............................................................. 8
STEP 2 - Setup Nursery Unit.............................................................. 9
STEP 3 - Turn on your Monitor ........................................................10
STEP 4 - Test and get to know your Monitor ............................. 11
STEP 5 - Activate and deactivate additional functions ........14
Troubleshooting ......................................................................................16
Warranty ................................................................................................... 18
Technical specifications ......................................................................19
DEUTSCH................................................................................................. XX
XX ............................................................................................................... XX
OWNER’S MANUAL
KEEP YOUR OWNER’S MANUAL FOR FUTURE REFERENCE.
PLEASE READ THE WARNINGS AND INSTRUCTIONS CAREFULLY BEFORE
ASSEMBLING & USING THE PRODUCT.
FAILURE TO FOLLOW THE WARNINGS AND THE INSTRUCTIONS COULD RESULT
IN SERIOUS INJURY OR DEATH OR DAMAGES TO THE PRODUCT.
WARNING
Adult assembly required.
Keep small parts away from children when assembling.
We, at Angelcare®, stand behind all of our products.
If you are not completely satisfied or have any questions,
United States and Canada: please contact us at: anglecare@cdecinc.ca
Other countries: please contact your local Distributor.
E
WARNING
1. THIS PRODUCT CANNOT REPLACE RESPONSIBLE ADULT SUPERVISION. This
product is designed to aid in the monitoring
of your child. When using the monitor, you
must still provide the supervision necessary
for the continued safety of your child. Monitoring of premature babies, or those considered to be at risk, should always be carried
out under the supervision of a health professional. This monitor is not intended to be
used as a medical monitor.
2. STRANGULATION HAZARD.
Children have STRANGLED in cords.
Keep the Adapter cords out of the reach of
children. DO NOT put the Nursery Unit
inside a crib or play yard. Because of the serious strangulation risk to infants and toddlers,
parents and caregivers
should never place the
Nursery Unit within
3 feet (1 meter) of a
crib. NEVER use
extension cords with
AC Adapters. ONLY
use the AC Adapters
provided.
3. When an AC Adapter is plugged into an
electrical outlet, DO NOT touch the exposed
end.
4. ALWAYS be sure that both the transmitter and receiver are working properly and are
within range of each other. Test monitor before first use, periodically and when changing
location of the Nursery Unit.
5. ALWAYS be sure to immediately check on
baby whenever an alarm sounds.
6. DO NOT use monitor near water (such as
bath tub, sink, etc.).
7. Keep monitor AWAY from heat sources
(such as stoves, radiators, etc.).
8. ALWAYS place both the Nursery Unit and
Parent Unit on a flat surface in an upright
position and allow for proper ventilation.
DO NOT place on sofas, cushions, beds, etc.
which may block ventilation.
9. This monitor uses public airwaves to transmit signals. The Parent Unit may pick up signals or interference from other nursery monitors in your area. Your monitor may even be
picked up by other households. To protect
your privacy, make sure both units are turned
OFF when not in use. If you experience interference, change the channel on both units.
10. This product is NOT a toy. DO NOT allow
children to play with it.
11. This product contains small parts. Adult
assembly required. Exercise care when unpacking and assembling the product and
keep small parts away from children.
12. Use and store the monitor at a temperature between 50°F (10°C) and 104°F (40°C).
BATTERY WARNING
13. Use ONLY AAA RECHARGEABLE batteries for the Parent Unit. DO NOT mix old and
new batteries. DO NOT mix alkaline, standard
or rechargeable batteries. Insert batteries
with correct polarity. DO NOT short-circuit
supply terminals. ONLY use the recommended batteries or equivalent (volts and size) and
the correct adapter. Remove batteries when
product is stored for long periods of time or
when batteries are exhausted. Dispose exhausted batteries properly. DO NOT recharge
non-rechargeable batteries. Rechargeable
batteries are ONLY to be charged under adult
supervision. Keep all batteries away from children.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
DO NOT EXPOSE TO RAIN OR MOISTURE
IMPORTANT SAFETY INSTRUCTIONS
14.1 Read these instructions - All the safety
instructions should be read before the product is operated.
14.2 Keep these instructions. The safety and
operating instructions should be retained for
future reference.
14.3 Heed all warnings – All warnings on the
product and in the operating instructions
should be adhered to.
14.4 Follow all instructions – All operating
and use instructions should be followed.
14.5 Water and moisture - DO NOT use this
apparatus near water. For example, near a
bath tub, wash bowl, kitchen sink, laundry
tub, in a wet environment or near a swimming pool and the like. Care should be taken
so that objects DO NOT fall onto units and
that liquids are not spilled into unit through
its openings.
14.6 Cleaning - Disconnect all units before
cleaning. DO NOT immerse in water any part
of the Nursery Unit, Parent Unit. Clean only
with dry cloth. DO NOT spray with cleaning
products or solvents.
14.7 Ventilation - DO NOT block any ventilation openings. Allow for proper ventilation
when units are in use. DO NOT cover the
Nursery Unit or Parent Unit with any object
such as a blanket. DO NOT place it in a drawer or in any location which would muffle the
sound or interfere with the normal flow of air.
14.8 Heat sources - DO NOT install near any
heat sources such as radiators, heat registers,
stoves, TVs or other apparatus (including amplifiers) that produce heat. Heat can damage
the case or electrical parts.
14.9 Power cord protection - Protect the
Adapter’s power cord from being walked on
or pinched by furniture or other items – Power supply cords should be routed so that they
are not likely to be walked on or pinched by
items upon or against them, paying particular
attention to cords and plugs, convenience receptacle, and the point where they exit from
the product.
14.10 Accessories - Only use attachments/accessories specified by the manufacturer. DO
NOT place this product on an unstable cart,
stand, tripod, bracket or table. The product
may fall, causing serious injury to a child or
adult and serious damage to the product.
Use ONLY with a cart, stand, tripod, bracket
or table recommended by the manufacturer
or sold with the product. Any mounting of
the product should follow the manufacturer’s
instructions.
14.11 Unplug this appliance during lightning
storms or when not used for long periods of
time.
14.12 Servicing - DO NOT attempt to service
this product yourself as opening or removing
covers (except battery doors) may expose
you to dangerous voltage or other hazards.
14.13 Replacement parts - When replacement
parts are required, be sure the replacement
parts specified by the manufacturer have
the same characteristic as the original part.
Unauthorized substitution may result in fire,
electric shock or other hazards.
14.14 Usage - This baby monitor is intended
as an aid. It is NOT a substitute for responsible
and proper adult supervision and should not
be used as such. Use this appliance ONLY for
its intended use as described in this manual.
14.15 Power Sources - Operate this product
only from the type of power source indicated
on the type plate of the adaptor. If you are
unsure of the type of power supply to your
home, consult your dealer or local power
company.
14.16 Overloading - DO NOT overload wall
outlets, extension cords or integral convenience receptacles as this can result in a risk
of fire or electric shock.
14.17 Object and Liquid Entry - NEVER push
objects of any kind into this product through
casing slots as they may touch dangerous
voltage points or short out parts that could
result in a risk of fire or electric shock. NEVER
spill liquid of any kind on the product.
14.18 Antenna - The antenna used for this
transmitter must be installed to provide a
separation distance of at least 20 cm (7.9”)
from all persons and must not be collocated
or operating in conjunction with any other
antenna or transmitter.
14.19 Power Lines - An outside antenna system should NOT be located in the vicinity of
overhead power lines or other electric light
or power circuit, or where it can fall into such
power lines or circuits as contact with them
may be fatal.
14.20
ARD.
STRANGULATION HAZChildren have STRANGLED in
cords. Keep the Adapter cords out of the
reach of children. Because of the serious
strangulation risk to infants and toddlers,
parents and caregivers should NEVER
place the Nursery Unit
within 3 feet (1 meter)
of a crib. NEVER use
extension cords with AC
Adapters. ONLY use
the AC Adapters provided.
14.21 Interference - This monitor uses public
airwaves to transmit signals. The Parent Unit
may pick up signals or interference from other nursery monitors in your area. Your monitor may even be picked up by other households. To protect your privacy, make sure
both units are turned OFF when not in use.
If you experience interference, change the
channel on both units.
IMPORTANT SAFETY INSTRUCTIONS
RELATED TO USE OF BATTERIES
15.1 Use ONLY the type and size of batteries specified in the owner’s manual. There is a
risk of explosion if batteries are replaced with
an incorrect type.
15.2 Use ONLY AAA rechargeable batteries and/or the AC Adapters provided for the
Parent Unit. You must use only rechargeable
batteries in the Parent Unit. DO NOT use alkaline batteries or you will severely damage
the unit.
15.3 Charge the batteries for 15 hours prior to
first use. Be sure to have the monitor in the
OFF position during this period. ONLY use
the AC Adapters included with your monitor.
15.4 DO NOT use these adapters with any
other equipments.
15.5 When unplugging the AC Adapter from
the Nursery Unit, be sure it is switched to the
OFF position. If it isn’t, the unit will revert to
battery mode if batteries are installed.
15.6 DO NOT use rechargeable batteries in
the Nursery Unit. Use alkaline batteries ONLY.
15.7 DO NOT dispose batteries in fire. They
may explode. Check with local regulations for
possible special disposal instructions.
15.8 Exercise care in handling batteries in order not to short out the batteries with conducting materials such as rings, bracelets and
keys. Overcharging, short circuiting, reverse
charging, mutilation, or incineration of batteries must be avoided to prevent one or more
of the following occurrences: release of toxic
materials, release of hydrogen and/or oxygen
gas, rise in surface temperature.
15.9 DO NOT attempt to recharge batteries
provided with or identified for use with this
product that are not intended to be charged.
The batteries may leak corrosive electrolyte
or explode.
15.10 DO NOT attempt to rejuvenate the batteries provided with or identified for use with
this product by heating them. Sudden release
of battery electrolyte may occur, causing
burns or irritation to eyes or skin.
15.11 If and when necessary, the batteries
must be replaced with identical new ones or
equivalent (volts and size). If a battery to be
replaced is connected with other batteries in
series, replace the other batteries at the same
time as well. DO NOT mix old and new bat
teries.
15.12 Reverse polarity installation of the bat
teries in the end product must be avoided.
Reverse insertion of batteries can cause
charging, and that may result in leakage or
explosion.
WARNING
(North America Only)
15.13 Remove batteries from this product if
you store the product over 30 days because
the batteries could leak and damage the
product.
15.14 Discard ‘dead’ batteries as soon as pos
sible since ‘dead’ batteries are more likely to
leak in a product. If a battery has leaked or
vented, it should be replaced immediately us
ing protective gloves.
15.15 DO NOT store this product, or the bat
teries provided with or identified for use with
this product, in high-temperature areas.
16.1 Modifications not authorized by the man
ufacturer may void users authority to operate
this device.
16.2 NOTE: This equipment has been tested
and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to
provide reasonable protection against harm
ful interference in a residential installation.
This equipment generates, uses and can ra
diate radio frequency energy and, if not in
stalled and used in accordance with the in
structions, may cause harmful interference to
radio communications.
16.3 However, there is no guarantee that in
terference will not occur in a particular instal
lation. If this equipment does cause harmful
interference to radio or television reception,
which can be determined by turning the
equipment OFF and ON, the user is encour
aged to try to correct the interference by one
or more of the following measures:
Reorient or relocate the receiving
antenna.
Increase the separation between
the equipment and receiver.
Connect the equipment into an
outlet on a circuit different from that
to which the receiver is connected.
Consult the dealer or an experienced
radio/TV technician for help.
16.4 This device complies with part 15 of the
FCC Rules. Operation is subject to the follow
ing two conditions:
(1) This device may not cause harmful inter
ference, and
(2) This device must accept any interference
received, including interference that may
cause undesired operation.
FCC AND IC REGULATIONS
RF radiation exposure statement
The Nursery Unit complies with FCC RF radiation exposure limits set forth for an uncontrolled
environment. Caution: To maintain the compliance with the FCC’s RF exposure guideline, install
the Nursery Unit at least 20cm from nearby baby and persons.
Industry Canada
This product meets the applicable Industry Canada technical specifications.
CAN ICES-3 (B)/NMB-3(B)
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the
following two conditions: (1) this device may not cause interference, and (2) this device must accept
interference that may cause undesired operation of the device.
SETUP REQUIREMENTS
SOUND MONITOR
Model AC423
INCLUDED:
3X
2X
Rechargeable
Parent Unit
2 AC Adapters
Nursery Unit
3 AAA rechargeable
batteries for Parent Unit
WHAT YOU WILL NEED (NOT INCLUDED):
4X
4 AAA Alkaline
Batteries
for Nursery Unit
BABY’S ROOM:
Miniature Phillips
Screwdriver
IMPORTANT
Place the crib near a supporting wall and
far from air currents. Install the Nursery
Unit on a flat, stable surface facing the crib
at a distance of at least 1 meter (3 feet).
IMPORTANT
Keep
at least
1 m (3 ft)
apart
STEP 1 - CHARGE PARENT UNIT (12 HOURS)
IMPORTANT
Never use regular
alkaline batteries
in the Parent Unit;
they may explode.
1) Remove the battery cover and insert
the Rechargeable Batteries (included).
12
2) Connect the AC Adapter to the Parent
Unit and into an electrical outlet.
3) Charge the unit for 12 continuous
hours (prior to first use).
NOTE:
To optimize your battery performance please
refer to Battery Guidelines in the Trouble
Shooting section p.16.
PARENT UNIT:
A) LCD Screen
B) Power ON/OFF
C) Channel Button
D) Mute Button
E) Sound Volume
Up/Down
F) Speaker
G) Belt Clip
H) Battery Cover
I) AC Adapter Outlet
Front View
Rear View
STEP 2 - SETUP NURSERY UNIT
1) Remove the battery cover and insert
4 AAA Alkaline Batteries (not included).
2) Place the Nursery Unit at a minimum
of 1m (3ft) away from the crib.
3) Connect the AC Adapter to the Nursery
Unit and plug into an electrical outlet.
NOTE:
The batteries maintain power
supply in case of power outage.
1m
(3 ft)
NURSERY UNIT:
A) Speaker
B) Low Battery Indicator
C) Power ON Indicator
D) Microphone
E) Out-of-Range Switch
ON/OFF
F) Power ON/OFF
G) Night Light Button /
Channel Selection
H) Speaker
I) AC Adapter Outlet
J) Volume Sensitivity Dial
Front View
Rear View
K) Battery Cover
STEP 3 - TURN ON YOUR MONITOR
1) Press the Parent Unit ON/OFF button
for 2 seconds.
2) Slide ON the Nursery Unit Power
ON/OFF button.
NOTE:
The screen of the Parent Unit will show
the channel of transmission (C1 to C8).
Then temperature reading will replace
the channel display.
If there is a lost connection
between the 2 units
(refer to troubleshooting p.16):
If there is no temperature display, turn OFF and
then ON the Nusery Unit again. The channel
display will then turn to temperature reading
in one minute.
• The Out-of-range icon
(if activated) will blink
on the screen and the Parent
Unit will beep.
CHANNEL SELECTION
TO SELECT THE CHANNEL:
1) Press the Channel button
to enter the channel mode.
The Antenna icon
will blink.
2) Press and hold the Nusery Unit back
button until the Night Light flashes.
The Antenna icon
will blink with present
of the channel
number display
3) Press and release the Nusery Unit back
button to change the channel your
monitor transmits on (C1 to C8).
4) Press and hold the Nusery Unit back
button until the Night Light stops
flashing to confirm your channel
selection and quit to normal mode.
NOTE :
If the transmission is not clear, or if you hear
interference sounds, you should change
the channel.
10
IMPORTANT ICONS
Nursery Unit:
Appears when the Nusery Unit
battery is low
Out-of-Range:
Indicates the loss of connection
between the Parent Unit and
Nursery Unit.
Parent Unit:
Appears only when the Parent
Unit is in channel selection mode.
Channel Display:
Indicates selected channel
Volume/ Microphone Sensitivity Level:
Indicates speaker volume
and sound level.
Battery Level icon:
Indicates battery level
Empty
Sound:
Indicates sound activation.
Flashing when speaker is muted.
1/2 Full
Full
Temperature Display:
Indicates room temperature
Charging
STEP 4 - TEST AND GET TO KNOW YOUR MONITOR
4.1 - SOUND
TO TEST SOUND:
IF YOU HEAR NO SOUND:
Ask someone to speak into the Nursery Unit
or place the unit near a radio to ensure
that sound is being picked up.
• Check that both units are switched on.
• Check that both units are plugged into
functioning electrical outlets.
• Check the batteries in both units
(replace or recharge them as necessary
per unit).
• Bring the Parent Unit closer
to Nursery Unit.
IMPORTANT
To avoid feedback (whistling),
keep both units at least 3 meters apart
(10 feet).
ADJUST THE SOUND LEVEL
PUT IN TEMPORARY MUTE MODE
Raise volume
Press the Mute
button once
to mute the sound
(see step 5.3).
Lower volume
11
4.2 - BATTERIES
HOW TO CHECK THE BATTERIES:
Unplug the AC Adapters from both units.
•
•
If the Nursery Unit Power Indicator
does not show or if the Low Battery
Indicator does show, replace
the batteries.
If the Parent Unit screen does not
light up or it switches off, recharge
the batteries.
The Power Indicator
on the Nursery Unit
empty
1/2 full
full
The Low Battery Indicator
on the Nursery Unit
HOW TO CHARGE THE BATTERIES
IN THE PARENT UNIT:
Plug the AC into the Parent Unit and
a working electrical outlet. Your Parent
Unit can function with the batteries
at 1/2 capacity but it is recommended that
they are fully charged before unplugging
from the AC Adaptor and power outlet
for maximum use.
PARENT UNIT BATTERY ALARM
•
•
•
Alarm activates when batteries need to be recharged.
Parent Unit will emit a beep sound every 15 seconds.
Battery Alarm icon will show on screen.
4.3 - MICROPHONE SENSITIVITY LEVEL
TO ADJUST THE MICROPHONE SENSITIVITY LEVEL:
You can adjust the Nursery Unit
sensitivity dial to change your microphone
from less sensitive to very sensitive.
This sensitivity dial is located on the back
of the Nursery Unit.
12
YOU ARE NOW READY
TO USE YOUR MONITOR
The Angelcare® monitor can be used with the pre-program factory settings
or you can also customize your settings to your preference.
DEFAULT SETTINGS
Temperature Unit: Celsius
Out of Range: OFF
Speaker Volume Level: 3
Microphone Sensitivity Level: Middle
Night Light: OFF
IMPORTANT
• Test your monitor before first use.
• Test your monitor regularly to ensure it is functioning correctly.
13
STEP 5 – ACTIVATE AND DEACTIVATE ADDITIONAL FUNCTIONS
The Angelcare® monitor can be used with the pre-program factory settings
or you can also customize your settings to your preference.
5.1 - OUT-OF-RANGE
Your monitor has an Out-of-Range function that advises you when the Parent Unit
cannot receive the signal from the Nursery Unit. Out-of-Range situations can be
caused by distance or by physical interferences.
RANGE:
Up to 250 meters / 820 ft (open field)
TO ACTIVATE THIS FUNCTION:
ON
Slide the Out-of-Range button
on the Nursery Unit
to turn it ON or OFF.
The Out-of-Range Indicator
will blinks on the Parent Unit.
OFF
OUT-OF-RANGE ALARM
•
•
•
Alarm activates when your two units are not communicating.
The Parent Unit will emit a double beep every 8 seconds.
Out of Range Icon will flash on the screen.
The Out-of range Icon will also flash
when channel is being changed or
the unit is reconnecting
IMPORTANT
If the Parent Unit is OFF after out of range function being set ON, it is needed to reset
and reactivate the function to ON again. To reset it, make sure the Parent Unit is ON
again and slide the Nursery Unit switch to OFF and then slide the switch to ON again
as to reactivate the Out of range function.
TO STOP THE OUT-OF-RANGE ALARM:
Press 2 seconds
to turn the Parent
Unit OFF
14
OR
Turn the Nursery
Unit ON
5.2 - NIGHT LIGHT
Press the Night Light button
on the back of the Nursery Unit
to turn it ON or OFF.
When the Nusery Unit
power source is the
adapter, the night light
is illuminated from
all edge sides of the
Nusery Unit body.
When it is used with
battery only, the night
light is illuminated only
from top edge of the
Nusery Unit.
5.3 - TEMPORARY MUTE
Allows you to put your monitor
in temporary Mute mode.
TO ACTIVATE MUTE:
Press the Mute button.
TO DEACTIVATE MUTE:
Press the Mute button again
to hear sounds.
After 2 minutes the sound function
will be automatically reactivated.
NOTE:
If you press too long on the
Sound/OFF button it will shut
down the Parent Unit.
The Sound Icon will blink
on the Parent Unit whilst
the Temporary MUTE
is activated.
15
TROUBLESHOOTING
TAKING CARE OF YOUR RECHARGEABLE BATTERIES
• Ensure that you fully charge your batteries for 15hrs before their first use.
• To maintain maximum battery life it is recommended that you fully discharge
your batteries periodically. Battery performance can be diminished by leaving
the batteries constantly charging. If your parent unit is not in use, please turn it off.
• Inadequate battery power can impair the performance of your monitor. If you are not
happy with the performance of your Parent Unit/Monitor please replace the rechargeable
batteries (4 x NiMH Rechargeable Batteries).
• It is advisable to change the batteries every 6 months.
NO SOUND IS BEING TRANSMITTED
• Change to the following as some text regarding MUTE is duplicated:
• Ensure that both units are switched ON.
• Check that the sound has not been turned down on the Parent Unit. Increase the volume
level on the Parent Unit, refer to step 4.1.
• Check on the Parent Unit screen to see if the monitor is in temporary MUTE mode
instead of ON mode. Deactivate the temporary MUTE function, refer to step 5.3.
• If there is no power to any unit check/replace the batteries, recharge the Parent Unit
& check the AC Adaptors are working. Change electrical outlets if required.
• Bring the Parent Unit and Nursery Unit closer together.
NURSERY UNIT POWER ON INDICATOR (GREEN LIGHT) DOES NOT LIGHT UP
• Switch OFF and back ON the Nusery Unit.
• Check connections or change to another electrical outlet.
WEAK RECEPTION
•
•
•
•
Bring units closer together.
Change the position of one or both units.
Place units on a flat surface away from baby’s reach.
Replace the batteries or recharge Parent Unit.
STATIC, DISTORTION, INTERFERENCES
(FROM OTHER MONITORS, WIRELESS PHONES, WALKIE-TALKIES, ETC...)
• Rotate Parent Unit or move it away from source of interference.
• Try a different channel, refer to step 3.
16
FEEDBACK (LOUD NOISES EMITTED FROM THE PARENT UNIT)
• Move units farther apart (at least 3 meters/10 feet apart).
• Decrease volume on Parent Unit.
THE PARENT UNIT SCREEN IS BLACK (PARENT UNIT IS OFF)
• Turn the Parent Unit back ON by pushing and holding the power button.
• Replace the batteries or recharge Parent Unit.
If you experience a problem that is not noted in this manual,
please do not return the product to the store. If you are not completely
satisfied or have any questions:
United States and Canada: please contact us at: angelcare@cdecinc.ca
Other countries: please contact your local Distributor.
We may have a simple solution to your problem.
17
LIMITED WARRANTY
Angelcare® warrants to the original owner of this product that Angelcare® rechargeable,
sound monitor (model AC423) is free from any material and workmanship defects, for a
period of one (1) year (rechargeable batteries not included) from the date of the original
purchase. If this monitoring system fails to function properly when used as directed under
normal conditions within the one year period, Angelcare® will either repair or replace the
product, at our discretion, free of charge. Please contact your distributor.
The product must be accompanied by a proof of purchase, either a bill of sale or other
proof that the monitoring system is within the warranty period. Angelcare® will bear the
cost of repairing or replacing the product and shipping it back to you.
This warranty does not apply to a product which has been damaged as a result of
improper maintenance, an accident, improper voltage supply or any other form of
misuse. The warranty is also void if the owner repairs or modifies the product in any
way. Angelcare® is not liable for any incidental or consequential damages with regard
to this product. The warranty also excludes any liability other than what is stated above.
No other warranty is given.
LEGAL RIGHTS VARY FROM COUNTRY TO COUNTRY. SOME COUNTRIES DO NOT ALLOW
THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES,
SO THE ABOVE LIMITATIONS MAY NOT APPLY TO YOU.
WE ARE NOT IN ANY WAY RESPONSIBLE FOR ANY OUTCOME RESULTING
FROM THE USE OF THIS PRODUCT.
IMPORTANT!
This Angelcare® monitor is a personal care product. Please do not return this product
to the store. If you have questions or need help, please call your distributor before returning
this product.
18
TECHNICAL SPECIFICATIONS
Batteries:
Range:
up to 820 ft. (250m)
Number of Channels:
USA/C anada: 8 channels.
Europe: 8 channels.
DO NOT mix old and new batteries.
DO NOT mix alkaline standard
(carbon-zinc), or rechargable
(NI-CD, NIMH, etc) batteries.
Transmission:
Power Supply:
4 AAA alkaline batteries (not included)
or 100-240V AC/7.5V DC adapter
for Nursery Unit.
Transmission from the Nursery
Unit to the Parent Unit is made on the
864 MHz frequency in Europe/Asia/Africa
and on the 927 MHz frequency for North
America/Ecuador/Oceania.
3 AAA rechargeable batteries and
100-240V AC/7.5V DC adapter
for the Parent Unit.
This Device complies with the requirements
set out in the R&TTE 1999/05/EC Directive.
Caution: To reduce the risk of electric
shock, do not expose this product to rain
or moisture.
Danger of explosion if batteries are
incorrectly replaced. The included Batteries
are 3 AAA NIMH rechargeable batteries,
manufactured by GPI INTERNATIONAL
LIMITED (GN60AAAHC, 1.2V 600mAh) or
by HIGHPOWER TECHNOLOGY CO., LTD
(HFR-44AAAJ600, 1.2V 600mAh).
They may only be replaced by 3 AAA
NIMH rechargeable batteries.
PROTECT THE ENVIRONMENT
This electronic equipment contains reusable material and must not be disposed
with domestic waste. Please take it to a collecting point for electric and electronic
equipment (ask your local authorities for details).
E r P COMPLIANCE
SOUTH AFRICA-BRAZIL-ECUADOR-EUROPEAN UNION
®
Brand power supply-model number T07505V001
Use only Angelcare
GERMANY
Use only Angelcare
AUSTRALIA
Use only Angelcare
NORTH AMERICA
Use only Angelcare
®
Brand power supply-model number T07505F002
®
brand power supply-model number T07505S002
®
brand power supply-model number T07505U002
UK-MALTA-ASIA-CYPRUS
®
brand power supply-model number T07505B001
Use only Angelcare
19
IM423-INT-101813

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : Administrator
Create Date                     : 2013:12:19 14:36:29+08:00
Modify Date                     : 2013:12:19 14:36:29+08:00
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Metadata Date                   : 2013:12:19 14:35:51+08:00
Creator Tool                    : Adobe InDesign CC (Macintosh)
Instance ID                     : uuid:d85f6737-66bb-4e7f-a4db-121d752c9563
Original Document ID            : xmp.did:F97F117407206811871F8BD8A7D4FCBB
Document ID                     : xmp.id:bee9e164-09d9-4769-9c95-28113fe540bc
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:ae41d55b-a141-481b-99bd-c4b4008805db
Derived From Document ID        : xmp.did:fbec9e96-74a4-4c73-b0a0-53d3710895d3
Derived From Original Document ID: xmp.did:F97F117407206811871F8BD8A7D4FCBB
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CC (Macintosh)
History Changed                 : /
History When                    : 2013:10:19 12:42:20-04:00
Format                          : application/pdf
Title                           : 10Am1_User_guide_AC423_Germany_11807_revised_20131219.pdf
Creator                         : Administrator
Producer                        : Acrobat Distiller 10.1.1 (Windows)
Trapped                         : False
Page Count                      : 20

EXIF Metadata provided by EXIF.tools