Anhui Huami Information Technology XMSH05HM Mi Band 3 User Manual
Anhui Huami Information Technology Co.,Ltd. Mi Band 3
User Manual
商品ID SKU编码 商品名称 69码 小米手环3 69 产品型号 料号 XMSH05HM 17 小米生态链产品包装图纸 图纸提供单位 安徽华米信息科技有限公司 项目名称 Wuhan_使用说明书_英文版 版本号 V1.2 设计时间 2018.04.11 设计师 Read this manual carefully before use, and retain it for future reference 02 Installing the Fitness Tracker 03 Wearing the Mi Band 04 Pairing the Mi Band with a Smartphone 01 Product Overview 1. Insert one end of the fitness tracker into the slot from the front of the wristband. 2. Press down on the other end with your thumb to push the fitness tracker into the slot completely. Tighten the wristband around your wrist until there is enough slack to fit about one finger, then adjust the fit until you find a comfortable position. Note: Wearing the band too loosely may impact data collection by the heart rate monitor. 1. To download the Mi Fit app, scan the QR code below or search for "Mi Fit" on the Mi App Store or Apple Store. Touchscreen Heart Rate Monitor Button 06 Removing the Fitness Tracker After the Mi Band is paired successfully, it will begin to track and analyze your daily activities and sleeping habits. Press the button to activate the display.Slide up or down on the screen to browse your activity data, measure your heart rate, and access many other features. Slide left or right on the screen to switch the display between different items. Remove the wristband from your wrist, hold on to each end and pull on the wristband until you see a small gap between the fitness tracker and the wristband. Use your finger to pop the fitness tracker out of its slot from the front side of the wristband. 材质工艺要求 Mi Fit Press the button on the wristband to confirm pairing When the Mi Band starts to vibrate, touch the button on the wristband to confirm pairing. Charging Port Fitness Tracker 2. Open the Mi Fit app, log in to your account and select "Device Pairing", then follow the pairing instructions to proceed. When the Mi Band starts to vibrate and the Bluetooth pairing notification appears on the screen, press the button to complete the pairing process. Note: Please make sure Bluetooth connection is activated on your mobile phone. During the pairing process, please keep the Mi Band near your mobile phone. 05 Using the Fitness Tracker Wristband Charging Cable QR code for the Mi Fit app (Android 4.4/iOS 9.0 or later) 07 Charging the Mi Band 08 Important Safeguards 09 Specifications Regulatory Notice Please charge your Mi Band immediately when the low power indicator is on. When using the Mi Band to measure your heart rate, please keep your wrist steady. Mi Band 3 has a water resistance rating of 5ATM. It can be worn in the shower, swimming pool, or while swimming near the shore. It cannot be used, however, while sitting in a sauna or diving in the ocean. Underwater operation is not supported for the Mi Band's touch-button and touchscreen. After the Mi Band has come in contact with water, please use a soft cloth to wipe away excess water from its surface before using the device. Please keep the area between your wrist and the wristband dry during daily use, and clean the wristband with water regularly. Please stop using the product immediately and seek medical assistance if the contact area on your skin begins to show signs of redness or swelling. Name: Mi Band 3 Model: XMSH05HM Wight of the Fitness Tracker: 8.5 g Dimensions of the Fitness Tracker: 17.9 x 46.9 x 12 mm Wristband material: Thermoplastic elastomer Clasp material: Aluminum alloy Adjustable length: 155 - 216 mm Compatible with: Android 4.4/iOS 9.0 or later Battery capacity: 110mAh Battery type: Li-Ion polymer battery Input voltage: DC 5 V Input current: 250 mA (Max) IP rating: 5ATM Operating temperature: -10°C ~ 50°C Wireless connectivity: Bluetooth 4.2 BLE This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1 . This device may not cause harmful interference, and 2. this device must accept any interference received, including interference that may cause undesired operation. FCC ID: 2AC8UXMSH05HM Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, My Mi Band did not vibrate Note: This diagram is for reference only Slide up or down to switch between different functions Slide left/right on the screen to switch between items Disposal and Recycling Information there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. For more regulatory information and product certification/compliance logos related to the Mi Band 3, please go to More -> About on your Mi Band 3. 105g太空梭哑粉,印刷过哑油 折页方式:XX 制作工序: 印刷-连线哑油-模切-折页 Mi Band 3 User Manual The symbol signifies that this product has to be disposed separately from ordinary household wastes at its end of life. Please kindly be aware that this is your responsibility to dispose electronic equipment at recycling centers so as to help conserve natural resources. This device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. 材质要求: Manufactured for: Xiaomi Communications Co., Ltd. Manufactured by: Anhui Huami Information Technology Co., Ltd. (a Mi Ecosystem company) Address: Room 1201, Building A4, National Animation Industry Base, No. 800 Wangjiang West Road, Gaoxin District, Hefei, Anhui, China For further information, please go to www.mi.com 工艺要求: 色相正确、印迹牢固、 套印准确、各色套印 不露杂色,套印误差≤ 0.1mm 模切走位≤±0.5mm 颜色及专色: PANTONG Cool Gray 11C 纹理要求: 纹理方向 选择正确的 方向图标拖 动到图纸里 比例 1:1 单位 mm
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No XMP Toolkit : Adobe XMP Core 5.6-c143 79.161210, 2017/08/11-10:28:36 Format : application/pdf Title : Wuhan_使用说明书_17xxx_V1.2_20180411_海外版_认证用 Metadata Date : 2018:04:11 14:34:35+08:00 Modify Date : 2018:04:11 14:34:35+08:00 Create Date : 2018:04:11 14:34:35+09:00 Creator Tool : Adobe Illustrator CC 22.0 (Windows) Thumbnail Width : 256 Thumbnail Height : 164 Thumbnail Format : JPEG Thumbnail Image : (Binary data 8434 bytes, use -b option to extract) Instance ID : uuid:b2d0d19b-254f-4040-976d-76384ed77bad Document ID : xmp.did:1d0cb7c2-c643-2448-b661-4638f15c0856 Original Document ID : uuid:5D20892493BFDB11914A8590D31508C8 Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:09134879-8f58-8741-ab51-d550572e0b5a Derived From Document ID : xmp.did:09134879-8f58-8741-ab51-d550572e0b5a Derived From Original Document ID: uuid:5D20892493BFDB11914A8590D31508C8 Derived From Rendition Class : proof:pdf History Action : saved, saved History Instance ID : xmp.iid:4e268f7d-11f5-42fb-9cfe-21c9cf277f7b, xmp.iid:1d0cb7c2-c643-2448-b661-4638f15c0856 History When : 2017:03:22 12:29:17+08:00, 2018:04:11 14:34:33+08:00 History Software Agent : Adobe Illustrator CC 2015 (Macintosh), Adobe Illustrator CC 22.0 (Windows) History Changed : /, / Startup Profile : Print Has Visible Overprint : False Has Visible Transparency : False N Pages : 1 Max Page Size W : 903.421514 Max Page Size H : 594.772740 Max Page Size Unit : Millimeters Font Name : AdelleSans, AdelleSansLt, FZLTZHK--GBK1-0, FZLTHK--GBK1-0, FZYOUH_504L--GB1-4, FZYOUH_506L--GB1-4 Font Family : Adelle Sans, Adelle Sans, 方正兰亭中黑_GBK, 方正兰亭黑_GBK, 方正悠黑, 方正悠黑 Font Face : Regular, Light, Regular, Regular, 504L, 506L Font Type : Open Type, Open Type, TrueType, TrueType, TrueType, TrueType Font Version : Version 2.000, Version 2.000, 1.00, 1.00, 2.00, 2.00 Font Composite : False, False, False, False, False, False Font File Name : AdelleSans-Regular.otf, AdelleSans-Light.otf, 方正兰亭中黑_GBK.TTF, 兰亭黑 GBK.TTF, 方正悠黑_504L_0.ttf, 方正悠黑_506L_0.ttf Plate Names : Magenta, Black, PANTONE Cool Gray 11 C, PANTONE 1505 C Swatch Group Name : 默认色板组 Swatch Group Type : 0 Swatch Colorant Swatch Name : PANTONE Cool Gray 11 C, PANTONE Cool Gray 6 C, PANTONE 1505 C Swatch Colorant Type : SPOT, SPOT, SPOT Swatch Colorant Tint : 100.000000, 100.000000, 100.000000 Swatch Colorant Mode : Lab, Lab, Lab Swatch Colorant L : 36.470600, 69.019600, 66.274513 Swatch Colorant A : 0, 0, 59 Swatch Colorant B : -3, -1, 93 Producer : Adobe PDF library 15.00 Page Count : 1 Creator : Adobe Illustrator(R) 17.0 For : ¹, Bounding Box : 41 50 2517 1631 Container Version : 11 Creator Version : 22 Image Height : 1581 Image Width : 2476 Image Size : 2476x1581 Megapixels : 3.9EXIF Metadata provided by EXIF.tools