Anker Innovations A2551 PowerWave 7.5 Car Mount User Manual

Download:
Mirror Download [FCC.gov]
Document ID	4045864
Application ID	4z0zWAx0nVCj/n41yGh8vA==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	80.04kB (1000525 bits)
Date Submitted	2018-10-23 00:00:00
Date Available	2018-10-23 00:00:00
Creation Date	2018-08-03 20:47:42
Document Lastmod	2018-08-03 20:47:42
Document Title	User Manual
Document Creator	WPS Office

Welcome Guide
PowerWave 7.5 Car Mount
Important Safety Instructions
Avoid dropping.
Do not disassemble.
Do not expose to liquids.
● For the safest and fastest charge, use original or certified cables.
● The maximum ambient temperature during use of this product must not exceed 40°C.
● Open flame sources, such as candles, must not be placed on this product.
● Only use a dry cloth or brush to clean this product.
● Do not install while driving.
●
●
●
At a Glance
Wireless Charging Car Mount
1. Telescopic arms
2. Bottom foot
3. Foot knob
4. Cradle
5. Release Button
6. Three-level adjustable claw
7. Swivel knob
8. Micro USB Port
9. LED indicator
Alternative three-sided handles
Lever
USB charging cable
Status LED
The LED indicator displays the status of the car mount charger.
Status
LED Indicator
Connected to power
Solid blue for three seconds,
then off
Charging mobile device /
Fully charged
Solid blue
- Metal or other foreign objects detected
- Using an incompatible car charger or cable
Flashing blue
Overheating problem detected
Flashing red
Compatibility
Before using this product, make sure your smartphone is compatible with Qi wireless charging
technology.
Car Charger
[换个 car charger]
Smartphone
Power Output
[换车载无线充上
面一个手机的图]
Qi-Compatible
Phones
iPhone 8,
iPhone 8 Plus,
iPhone X, etc
5V
2A
9V
2A
12V
1.5A
5W
7.5W
10W
Quick Charge 3.0
Samsung
Galaxy S9+,
S9, Note 8,
S8+, S8, S7
edge, S7, etc
LG
G7, V35, V30,
V30+, etc
9V
12V
2A
1.5A
Quick Charge 3.0
Mounting Your Smartphone
1. Loosen the foot knob on the back to adjust the height of the foot. The degree scale
printed on the bottom foot helps you best fit the dimensions of your smartphone.
【图：旋转后面 foot knob，参考刻度调节 foot 的高度】
Degree Scale
Ideal for
Note8
Samsung Note 8
i8+/S8+/S9+
iPhone 8+/Samsung S8+/Samsung S9+
S8/S9/S7 e
Samsung S8/S9/S7 edge
IX/S7
iPhone X/Samsung S7
i8
iPhone 8
2. Insert the three-level adjustable claw into your car’s air vent. Make sure the claw is
inserted securely in position.
[图：将夹子插入汽车的通风口]
● 3 levels to fit more air vents
[图：a. b.c 三种情况]
/
● Loosening the claw
3. Unscrew the swivel knob on the back, adjust the car mount to the optimal viewing
angle, then tighten the swivel knob to secure.
【图：松开背后旋钮调节角度，然后拧紧】
● Placing the car mount horizontally or vertically
【图：car mount 横放或者竖着放】
4. Press the release button on the side of the cradle to extend the telescopic arms.
【图：按侧面小按键展开两边双臂】
5. Place your smartphone in the mount and squeeze the telescopic arms until the phone
is securely in position. Adjust the mount to the perfect angle.
[图：放手机并固定]
Note
：
● For optimal charging performance, align the smartphone with the Qi coil on the
center of the car mount. If there is no grade scale for your smartphone or your
phone has a protective cover, you can slightly adjust the bottom foot to align the
smartphone with the Qi coil.
[图：指明中心的放置位置，参考竞品说明书图]
● To securely fasten the phone, press the rear-end position of the telescopic arms,
as illustrated.
[图：指明正确的按压位置]
● Non-intensive, arc-shaped or retraction-type air vents are not supported.
●
Do not place any foreign objects between your smartphone and the surface of the car
mount, including metal objects, credit cards, door keys, coins, or NFC cards, as it may
cause overheating.
[图：手机背面带铁片、指环，卡套都不适用]
● Using an ultra-thick protective phone case is not recommended as it may affect the
wireless charging function.
Using the Alternative Three-Sided Handles
If the three-level adjustable claw does not fit your air vents, use the alternative threesided handles instead.
1. Unscrew the swivel knob on the back and remove the three-level adjustable claw.
[图：取出旧的夹子]
2. Firmly insert the round head of the three-sided handles into the joint of the car mount,
then tighten the swivel knob to secure.
[图：安上新的夹子，并拧紧]
3. Press and hold the lever to firmly insert the claw into your car’s air vent. Make sure
the claw is inserted securely in position.
4. Repeat steps 2-5 mentioned in the “Mounting Your Smartphone” section to mount
your phone.
Charging Your Smartphone Wirelessly
1. Mount your smartphone in your desired location.
2. Use the USB cable to connect the car mount to a car charger.
❖ Your phone will begin to charge wirelessly.
[图： USB 线连接车充充电。]
3. After use, press the release button to remove your phone.
[图： 按侧边按键展开双臂，取出手机。]
● Wireless charging function is sensitive to temperature. The in-car high
temperature may pause charging or slow down the charging speed, so it is
recommended to turn on the air conditioner in your car to avoid overheating. If
the LED indicator flashes red, it indicates this product is overheated. Let it cooled
down before you resume charging.
● For optimal wireless charging performance, use a Quick Charge™ car charger.
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures: (1) Reorient or relocate the
receiving antenna. (2) Increase the separation between the equipment and receiver. (3)
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected. (4) Consult the dealer or an experienced radio / TV technician for help.
Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance of 20 cm
between the radiator & your body.
Product Name: PowerWave 7.5 Car Mount
Model: A2551
The following importer is the responsible party.
Company Name: Fantasia Trading LLC
Address: 9155 Archibald Avenue, Suite 202, Rancho Cucamonga, CA, 91730, US
Telephone: +1 (909) 484 1530
- English: "
This device complies with Industry Canada licence-exempt RSS standard(
s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that
may cause undesired operation of the device."
- French:"
Le présent appareil est conforme aux CNR d'Industrie Canada applicables
aux appareils radio exempts de licence. L'exploitation est autorisée
aux deux conditions suivantes :
(1) l'appareil nedoit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique
subi, même si le brouillage est susceptible d'en compromettre le
fonctionnement."
Declaration of Conformity
Hereby, Anker Innovations Limited declares that the product type A2551 is in compliance with Directive
2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address:
https://www.anker.com/products
해당무선설비기기는 운용 중 전파혼신가능성이 있으므로 인명안전과 관련된 서비스는 할 수 없습니다
Specifications
Input
5V=2A／9V=2A／12V=1.5A
Size (L x W x H)
74.1 x 17.7 x 58.3 mm / 2.9 x 4.6 x 2.3 in
Weight
- car mount with threelevel adjustable claw
- three-sided handles
- USB cable
134g/4.7oz
21g/0.7oz
40g/1.4oz
18g/0.6oz
Product Number: A2551
The product shall not be disposed together with the normal waste. It must be recycled.
EN: Customer Service
IT: Servizio Clienti
EN: 18-month Limited Warranty
IT: Garanzia valida 18 mesi
EN: Lifetime Technical Support
IT: Assistenza post-vendita a vita
lient iiaAR:
isi i t έ 18 ϧ i AR:
t nt ii ϧ nt ϋintAR:
(US) +1 (800) 988 7973 Mon-Fri 9:00am - 5:00pm (PT)
(UK) +44 (0) 1604 936200 Mon-Fri 6:00 - 11:00 (GMT)
(DE) +49 (0) 69 9579 7960 Mon-Fri 6:00 - 11:00
(中国) +86 400 0550 036 周一至周五 9:00 - 17:30
(日本) +81 03 4455 7823 月-金 9:00 - 17:00
For FAQs and more information, please visit
https://www.anker.com/support
Anker Innovations Limited
Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : No
Page Count                      : 13
Author                          : 
Comments                        : 
Company                         : 
Create Date                     : 2018:08:03 20:47:42+12:47
Creator                         : WPS Office
Modify Date                     : 2018:08:03 20:47:42+12:47
Producer                        : 
Source Modified                 : D:20180803204742+12'47'
Subject                         : 
Title                           : 
Trapped                         : false

EXIF Metadata provided by EXIF.tools