Anker Innovations A3371 Soundcore Infini User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3914249
Application ID	zKloOGjYRhG0tDepTk+l6g==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	32.54kB (406728 bits)
Date Submitted	2018-07-06 00:00:00
Date Available	2018-07-09 00:00:00
Creation Date	2018-07-03 15:18:55
Producing Software	Adobe PDF Library 15.0
Document Lastmod	2018-07-03 15:18:57
Document Title	Users Manual
Document Creator	Acrobat PDFMaker 15 Word 版

User Manual
Soundcore Infini
Soundbar
A3371
FCC Caution
Any Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital d
evice, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable pr
otection against harmful interference in a residential installation. This equipment generates use
s and can radiate radio frequency energy and, if not installed and used in accordance with the i
nstructions, may cause harmful interference to radio communications. However, there is no gua
rantee that interference will not occur in a particular installation. If this equipment does cause h
armful interference to radio or television reception, which can be determined by turning the equi
pment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is con
nected.
-Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled enviro
nment. This equipment should be installed and operated with minimum distance 20cm between
the radiator & your body.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two co
nditions: (1) This device may not cause harmful interference, and (2) this device must accept an
y interference received, including interference that may cause undesired operation.
IC Caution
“This equipment complies with IC RF radiation exposure limits set forth for an uncontrolled
environment.
This equipment should be installed and operated with a minimum distance of 20 centimeters
between the radiator and your body.”
" ce matériel est conforme aux limites d'exposition aux rayonnements rf de ic énoncés dans un
autre environnement.
ce matériel doit être installé et exploité à une distance minimale de 20 cm entre le radiateur et
votre corps. "
- English:
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) This device may not cause interference,
and (2) This device must accept any interference, including interference that may cause
undesired operation of the device.
- French:
Le présentappareilestconforme aux CNR d'Industrie Canada applicables aux appareils radio
exempts de licence. L'exploitationestautorisée aux deux conditions suivantes:
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareildoit accepter tout brouillageradioélectriquesubi, mêmesi le
brouillageest susceptible d'encompromettre le fonctionnement.
Safety Instructions
① Avoid dropping.
② Do not disassemble.
③ Do not submerge in water.
④ Avoid extreme temperatures.
⑤ Do not use the device outdoors during thunderstorms.
⑥ Use original or certified cables.
⑦ Do not use any corrosive cleaner / oil to clean.
8. The product should not be exposed to dripping or splashing water.
What’s Included
① Soundbar
② Power cord
③ Remote control
④ AAA Batteries
⑤ 3.5mm to RCA audio cable
⑥ Optical cable
⑦ Wall mounting brackets
8. Wall mounting bolts
9. User manual
10. Wall mounting template
At a Glance
① Status indicator
Status
Status indicator light
Standby
Solid red
Optical
Solid green (stays on for 10 seconds)
Coaxial
Solid orange (stays on for 10 seconds)
Aux in
Solid cyan (stays on for 10 seconds)
Bluetooth pairing mode Flashing blue
Bluetooth device
connected
Solid blue (stays on for 10 seconds)
Volume up and down
Flashing white
Maximum volume
Solid white (stays on for 10 seconds)
Minimum volume
Solid white (stays on for 10 seconds)
Music equalizer mode
Flashing white (once)
Movie equalizer mode
Flashing white (2 times)
Dialogue mode
Solid white (stays on for 5 seconds)
Mute
Solid yellow
② Power button
③ Volume-down control
④ Volume-up control
⑤ Source input button
⑥ Wall mounting screw holes
⑦ Power input
⑧ Service port
9. Aux input
10. Optical input
11. Coaxial
Note: Press source input button and hold for 3 seconds to activate Bluetooth pairing mode.
Placement
●
Table Placement
1. Place the soundbar on a solid surface.
●
Wall mount Installation
Step 1: Insert two wall mounting screws into the wall mounting screw holes, then fasten the
screws.
Step 2: Place the wall mounting template against the wall, under your TV. Mark the 4 bracket
holes on the wall with a pencil.
Step 3: Fix the two mounting brackets on the wall according to the center points. Use bolts
(not included) to secure the brackets.
Step 4: Hang the soundbar on the brackets.
Remote Control
1. Battery installation
2. Remote control buttons
Button
Button functions
① Power button
Press to switch on / off the soundbar.
② Volume-up control
To increase the volume.
③ Previous
Return to previous track.
④ Play / Pause
To pause / resume playback.
⑤ Bluetooth button
To activate Bluetooth mode.
1. Press to activate Bluetooth mode.
2. Press and hold for 3 seconds to reconnect.
⑥ Dialogue mode
To activate the dialogue mode.
button
⑦ Music equalizer
To activate the music equalizer mode.
button
⑧ Mute button
To temporarily turn off the sound. Press the button again to turn
the sound back on.
9. Next
Move to next track.
10. Volume-down
control
To decrease the volume.
11. Source input
button
To change source input. Press this button for 3 seconds to
activate Bluetooth pairing mode.
12. Movie equalizer
button
To activate the movie equalizer mode.
Note: The status indicator light will stay on for approximately 10 seconds when the soundbar
is in Bluetooth mode / Aux in mode / Optical mode / Coaxial mode.
Using Your Soundbar
1. Turn On / Off
Note: The soundbar will automatically switch to standby mode when no audio input is
received for over 30 minutes. The soundbar will wake up from standby mode when any
button is pressed or source input is received.
a. Connect to your TV
1. You can use optical cable, coaxial cable or 3.5mm to RCA audio cable to connect to
the respective output port of your TV.
2. Press the source input button on the soundbar or remote control to activate the
corresponding mode.The status indicator will be solid green in optical mode, orange
in coaxial mode and cyan in Aux mode.
Note: The status indicator light will stay on for 10 seconds.
Note: Not all TVs have the audio outputs shown as above, please check your TV's
specifications before setup.
Note: Try set the TV output to PCM if there is no audio sound when using either of
the optical or coaxial inputs.
Note: Coaxial cable is not included.
b. Connect to other devices
1. You can use optical cable / coaxial cable or 3.5mm to RCA audio cable, or 3.5mm to
3.5mm cable (not included) to connect to the respective output port of other devices
(such as Blu-ray player, game console, tablet, MP3 Player / laptop etc).
2. Press the source input button on the soundbar or remote control to activate optical,
coaxial or Aux mode. The status indicator will be solid green in optical mode, orange
in coaxial mode and cyan in Aux mode.
Note: The status indicator light will stay on for 10 seconds.
Note: Follow your device's user manual if you want to connect the soundbar to your
other devices (such as Blu-ray player, game console, tablet, MP3 Player /
laptop...etc)..
Note: 3.5mm to 3.5mm cable is not included.
c. Bluetooth mode
1. Press power button on the remote control to switch on the soundbar.
2. Press the Bluetooth button on the remote control to activate Bluetooth pairing mode.
3. Turn on the Bluetooth of your device, search for Soundcore Infini on your Bluetooth
list then select connect.
4.
Bluetooth mode is activated
Flashing blue
Connected to device
Solid blue
Note: The status indicator light will
stay on for 10 seconds.
When turned on, Soundcore Infini will automatically connect to the last connected
device if available. If not, press and hold the Bluetooth button (or source input
button) for 3 seconds on the remote control or press the source input button on the
soundbar for 3 seconds to activate Bluetooth mode.
Having connection problems? Remove Soundcore Infini from your device’s
Bluetooth history and ensure it’s less than 10 meters away. Then try pairing again.
To get the best sound quality, make sure there is a clear line of sight between the
connected device and your soundbar.
When not in use, store your soundbar in a cool place.
Declaration of Conformity
Hereby, Anker Innovations Limited declares that the radio equipment type A3371 is in
compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is
available at the following internet address:
https://www.anker.com/products
Maximum output power: 0dBm
Frequency band: 2.4G band (2.4000GHz-2.4835GHz)
Anker Innovations Limited / Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok,
Kowloon, Hong Kong
Specifications
*Specifications are subject to change without notice.
Input
100-240V~ 50/60Hz
0.5A
Audio output
100 W
Size
880 x 56 x 90 mm /
34.6 x 2.2 x 3.5 in
Weight (without packaging)
2.9 kg / 104 oz
Bluetooth version
V4.2
Range
Product Number A3371
Soundcore Infini Soundbar
10 m / 33 ft

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Company                         : MicroWin10.com
Created                         : D:20180702
Create Date                     : 2018:07:03 15:18:55+08:00
Creator                         : Acrobat PDFMaker 15 Word 版
Last Saved                      : D:20180703
Modify Date                     : 2018:07:03 15:18:57+08:00
Source Modified                 : D:20180703071755
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.6-c015 81.157285, 2014/12/12-00:43:15
Metadata Date                   : 2018:07:03 15:18:57+08:00
Creator Tool                    : Acrobat PDFMaker 15 Word 版
Document ID                     : uuid:a133109a-d26c-44ac-a84f-f6344fe2504c
Instance ID                     : uuid:328d156b-9d51-4f72-8a82-ccb318fce69a
Subject                         : 2
Format                          : application/pdf
Producer                        : Adobe PDF Library 15.0
Page Layout                     : OneColumn
Page Count                      : 13

EXIF Metadata provided by EXIF.tools