Anker Innovations A3391 Soundcore Rave User Manual

Anker Innovations Limited Soundcore Rave Users Manual

Users Manual

User ManualSoundcore RaveA3391Safety Instructions① Avoid dropping.② Do not disassemble.③ Avoid extreme temperatures.④ Do not use the device outdoors during thunderstorms.⑤ Use original or certified cables.⑥ Do not use any corrosive cleaner / oil to clean.What’s Included
At a Glance①Central Volume Knob (For speaker volume control)② Power Button / Power Indicator③Source Input Button / Source Input Indicator④ Bluetooth Button / Bluetooth Indicator⑤ Previous Track Button⑥Multi-function Button⑦ Next Track Button⑧ Light Effects Button / Light Effects Indicator9.Bass Up Button / Bass Up Indicator10. MIC ECHO Volume Knob (For microphone volume control)11. AC Power Input12. Reset Hole
13. Mic Input14. Audio IN15. Audio OUT16. USB Port17. Power IQ USB PortUsing Your Soundcore Rave1. Turn On / OffON Press and hold for 1 secondOFF Press and hold for more than 2 secondsa. Bluetooth Mode
Note: Soundcore Rave can pair up to 2 mobile devices via Bluetooth(Dual BluetoothConnection).Flashing BlueBluetooth Pairing ModeSolid Blue改图：实心黑圈Connected to a deviceEnter True Wireless Stereo Group Mode /Disconnect True Wireless Stereo
Double Flashing BlueTrue Wireless Stereo Group ModeSolid Blue改图：实心黑圈Connected to True Wireless StereoWith True Wireless Stereo technology, you can pair your Soundcore Rave withanother Soundcore Rave to explore the best sound effects with left and right soundchannels separated on both speakers.改图：Play / Pause
Play Next SongPlay Previous SongPress to turn Bass Up on and offPress and hold for 2 seconds to switch between Indoor / Outdoormodes.Activate Siri / Other Voice Control SoftwareVolume Up / DownCheck available Light Effects modes on Soundcore App.When turned on, Soundcore Rave will automatically connect to the last connecteddevice if available. If not, press the Bluetooth pairing button to activate pairing
mode.To pair a different device, press the Bluetooth button to re-enter pairing mode. Thenrepeat the pairing steps.Having connection problems? Remove Soundcore Rave from your device’sBluetooth history and ensure it’s less than 3 feet away. Then try pairing again. Toget the best sound quality, make sure there is a clear line of sight between theconnected device and your speaker.b. Source InputPlug in an audio cable or insert USB drive, then press the source input button toswitch between AUX in mode and USB mode(support FAT32 / MP3 / WMA formats).Solid Green(Source input indicator)AUX in mode
Solid White(Source inputindicator)USB mode*SoundLine AUX cable sold separately.When using AUX mode, control audio playback via the connected device.c. Connect Multiple Rave SpeakersSoundcore Rave can connect to other Soundcore Raves via RCA cables to form a wiredparty chain.d. Microphone Connection
Connect the microphone to MIC IN port. You can adjust the microphone volume by turningthe MIC ECHO volume knob.3. Charging your Soundcore RaveBattery level <10%Battery level <25%
Battery level 25%~55%Battery level 51%~75%Battery level 75%~100%Slow Flashing White(Powerindicator)ChargingYou can charge your mobile device through the Power IQ USB port on Soundcore Rave.Use the included AC power cable to charge your Soundcore Rave and make sure itis fully charged before its first use.
Disconnect your speaker from the charger when fully charged. Do not charge yourspeaker for extended periods.4. Beat-Driven Light ShowPress to turn Light Effects On / OffNote: Flash can be turned off in Soundcore app individually.5. Soundcore AppDownload the Soundcore app for an enhanced product experience. Follow onscreeninstructions to set up Soundcore app.When not in use, store your speaker in a cool place.
Please note that your rights under applicable law governing the sale of consumer goodsremain unaffected by the warranties given in this Limited Warranty.Declaration of ConformityHereby, Anker Innovations Limited declares that the radio equipment type A3391 is incompliance with Directive 2014/53/EU. The full text of the EU declaration of conformity isavailable at the following internet address:https://www.anker.com/productsMaximum output power: 0dBmFrequency band: 2.4G band (2.4000GHz-2.4835GHz)Specifications*Specifications are subject to change without notice..Input 100V-240V AC,50~60HzCharge out 5 V ⎓ 2 AAudio output 160WBattery capacity max. 20000 mAhCharging time 4.0 hoursPlaytime (varies by volume level and music content) 24 hours
Size 255 x 245 x 505 mmWeight (without packaging) 8.37 kg / 295.2 ozBluetooth version V5.0Bluetooth range 20 m / 66 ftApple and the Apple logo are trademarks of Apple Inc.Google Play and the Google Play logo are trademarks of Google Inc.Product Number A3391Bluetooth Speaker / Soundcore Rave
FCC StatementThis device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment offand on, the user is encouraged to try to correct the interference by one or more of the followingmeasures:-Reorient or relocate the receiving antenna.-Increase the separation between the equipment and receiver.-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.-Consult the dealer or an experienced radio/TV technician for help.This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.The following importer is the responsible partyCompany Name: Fantasia Trading LLCAddress: 9155 Archibald Avenue, Suite 202, Rancho Cucamonga, CA, 91730, US Telephone: +1(909) 484 1530IC NOTICE TO CANADIAN USERS This device complies with Industry Canada licence-exempt RSS standard(s).Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesiredoperation of the device.Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts delicence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire debrouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si lebrouillage est susceptible d'en compromettre le fonctionnement.This equipment complies with IC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body.”ce matériel est conforme aux limites d'exposition aux rayonnements rf de ic énoncés dans un aut
re environnement. ce matériel doit être installé et exploité à une distance minimale de 20 cm entre le radiateur et votre corps.Important Safety Instructions1.Please read this owner’s guide carefully and save it for future reference.2.To reduce the risk of fire or electric shock, do not expose this product to rain or moisture.3.Do not place naked flame sources, such as lighted candles, on or near the product.4.Do not use this apparatus near water.5.Clean only with a dry cloth.6.Do not block any ventilation openings. Install in accordance with the manufacturer’sinstructions.7.Do not install near any heat sources, such as radiators,heat registers,stoves,or other apparatus.8.Protect the power supply or cord from being walked on or pinched, particularly at plugs,convenience receptacles, and the point where they exit from the apparatus.9.Only use attachments/accessories specified by the manufacturer.10.Unplug this apparatus during lighting storms or when unused for long periods of time.11.The maximum ambient temperature during use of the appliance must not exceed 45°C.12.Only suitable for safe use in areas below 2000m above sea level.13.Do not make unauthorized alterations to the product; doing so may compromise safety,regulatory compliance, system performance, and may void the warranty.14.Refer all servicing to qualified service personnel. Servicing is required when the apparatushas been damaged in any way:such as power supply or cord is damaged; liquid has been spilledor objects have fallen into the apparatus; the apparatus has been exposed to rain or moisture,does not operate normally, or has been dropped.15.The product contain battery pack, so shall not be exposed to excessive heat such assunshine, fire or the like.

Navigation menu