Anker Innovations A3391 Soundcore Rave User Manual
Anker Innovations Limited Soundcore Rave Users Manual
Users Manual
User Manual
Soundcore Rave
A3391
Safety Instructions
① Avoid dropping.
② Do not disassemble.
③ Avoid extreme temperatures.
④ Do not use the device outdoors during thunderstorms.
⑤ Use original or certified cables.
⑥ Do not use any corrosive cleaner / oil to clean.
What’s Included
At a Glance
①Central Volume Knob (For speaker volume control)
② Power Button / Power Indicator
③Source Input Button / Source Input Indicator
④ Bluetooth Button / Bluetooth Indicator
⑤ Previous Track Button
⑥Multi-function Button
⑦ Next Track Button
⑧ Light Effects Button / Light Effects Indicator
9.Bass Up Button / Bass Up Indicator
10. MIC ECHO Volume Knob (For microphone volume control)
11. AC Power Input
12. Reset Hole
13. Mic Input
14. Audio IN
15. Audio OUT
16. USB Port
17. Power IQ USB Port
Using Your Soundcore Rave
1. Turn On / Off
ON Press and hold for 1 second
OFF Press and hold for more than 2 seconds
a. Bluetooth Mode
Note: Soundcore Rave can pair up to 2 mobile devices via Bluetooth(Dual Bluetooth
Connection).
Flashing Blue
Bluetooth Pairing Mode
Solid Blue
改图：实心黑圈
Connected to a device
Enter True Wireless Stereo Group Mode /
Disconnect True Wireless Stereo
Double Flashing Blue
True Wireless Stereo Group Mode
Solid Blue
改图：实心黑圈
Connected to True Wireless Stereo
With True Wireless Stereo technology, you can pair your Soundcore Rave with
another Soundcore Rave to explore the best sound effects with left and right sound
channels separated on both speakers.
改图：
Play / Pause
Play Next Song
Play Previous Song
Press to turn Bass Up on and off
Press and hold for 2 seconds to switch between Indoor / Outdoor
modes.
Activate Siri / Other Voice Control Software
Volume Up / Down
Check available Light Effects modes on Soundcore App.
When turned on, Soundcore Rave will automatically connect to the last connected
device if available. If not, press the Bluetooth pairing button to activate pairing
mode.
To pair a different device, press the Bluetooth button to re-enter pairing mode. Then
repeat the pairing steps.
Having connection problems? Remove Soundcore Rave from your device’s
Bluetooth history and ensure it’s less than 3 feet away. Then try pairing again. To
get the best sound quality, make sure there is a clear line of sight between the
connected device and your speaker.
b. Source Input
Plug in an audio cable or insert USB drive, then press the source input button to
switch between AUX in mode and USB mode(support FAT32 / MP3 / WMA formats).
Solid Green(Source input indicator)
AUX in mode
Solid White(Source input
indicator)
USB mode
*SoundLine AUX cable sold separately.
When using AUX mode, control audio playback via the connected device.
c. Connect Multiple Rave Speakers
Soundcore Rave can connect to other Soundcore Raves via RCA cables to form a wired
party chain.
d. Microphone Connection
Connect the microphone to MIC IN port. You can adjust the microphone volume by turning
the MIC ECHO volume knob.
3. Charging your Soundcore Rave
Battery level <10%
Battery level <25%
Battery level 25%~55%
Battery level 51%~75%
Battery level 75%~100%
Slow Flashing White(Power
indicator)
Charging
You can charge your mobile device through the Power IQ USB port on Soundcore Rave.
Use the included AC power cable to charge your Soundcore Rave and make sure it
is fully charged before its first use.
Disconnect your speaker from the charger when fully charged. Do not charge your
speaker for extended periods.
4. Beat-Driven Light Show
Press to turn Light Effects On / Off
Note: Flash can be turned off in Soundcore app individually.
5. Soundcore App
Download the Soundcore app for an enhanced product experience. Follow onscreen
instructions to set up Soundcore app.
When not in use, store your speaker in a cool place.
Please note that your rights under applicable law governing the sale of consumer goods
remain unaffected by the warranties given in this Limited Warranty.
Declaration of Conformity
Hereby, Anker Innovations Limited declares that the radio equipment type A3391 is in
compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is
available at the following internet address:
https://www.anker.com/products
Maximum output power: 0dBm
Frequency band: 2.4G band (2.4000GHz-2.4835GHz)
Specifications
*Specifications are subject to change without notice.
.
Input 100V-240V AC,
50~60Hz
Charge out 5 V ⎓ 2 A
Audio output 160W
Battery capacity max. 20000 mAh
Charging time 4.0 hours
Playtime (varies by volume level and music content) 24 hours
Size 255 x 245 x 505 mm
Weight (without packaging) 8.37 kg / 295.2 oz
Bluetooth version V5.0
Bluetooth range 20 m / 66 ft
Apple and the Apple logo are trademarks of Apple Inc.
Google Play and the Google Play logo are trademarks of Google Inc.
Product Number A3391
Bluetooth Speaker / Soundcore Rave
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two con
ditions: (1) This device may not cause harmful interference, and (2) this device must accept any i
nterference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance co
uld void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital de
vice, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable prot
ection against harmful interference in a residential installation. This equipment generates uses an
d can radiate radio frequency energy and, if not installed and used in accordance with the instruc
tions, may cause harmful interference to radio communications. However, there is no guarantee t
hat interference will not occur in a particular installation. If this equipment does cause harmful int
erference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-
Connect the equipment into an outlet on a circuit different from that to which the receiver is conn
ected.
-Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environ
ment. This equipment should be installed and operated with minimum distance 20cm between th
e radiator & your body.
The following importer is the responsible party
Company Name: Fantasia Trading LLC
Address: 9155 Archibald Avenue, Suite 202, Rancho Cucamonga, CA, 91730, US Telephone: +1
(909) 484 1530
IC NOTICE TO CANADIAN USERS This device complies with Industry Canada licence-
exempt RSS standard(s).
Operation is subject to the following two conditions: (1) This device may not cause interference, a
nd (2) This device must accept any interference, including interference that may cause undesired
operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de
licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de
brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d'en compromettre le fonctionnement.
This equipment complies with IC RF radiation exposure limits set forth for an uncontrolled enviro
nment. This equipment should be installed and operated with a minimum distance of 20 centimet
ers between the radiator and your body.”
ce matériel est conforme aux limites d'exposition aux rayonnements rf de ic énoncés dans un aut
re environnement. ce matériel doit être installé et exploité à une distance minimale de 20 cm entr
e le radiateur et votre corps.
Important Safety Instructions
1.Please read this owner’s guide carefully and save it for future reference.
2.To reduce the risk of fire or electric shock, do not expose this product to rain or moisture.
3.Do not place naked flame sources, such as lighted candles, on or near the product.
4.Do not use this apparatus near water.
5.Clean only with a dry cloth.
6.Do not block any ventilation openings. Install in accordance with the manufacturer’s
instructions.
7.Do not install near any heat sources, such as radiators,heat registers,stoves,or other apparatus.
8.Protect the power supply or cord from being walked on or pinched, particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
9.Only use attachments/accessories specified by the manufacturer.
10.Unplug this apparatus during lighting storms or when unused for long periods of time.
11.The maximum ambient temperature during use of the appliance must not exceed 45°C.
12.Only suitable for safe use in areas below 2000m above sea level.
13.Do not make unauthorized alterations to the product; doing so may compromise safety,
regulatory compliance, system performance, and may void the warranty.
14.Refer all servicing to qualified service personnel. Servicing is required when the apparatus
has been damaged in any way:such as power supply or cord is damaged; liquid has been spilled
or objects have fallen into the apparatus; the apparatus has been exposed to rain or moisture,
does not operate normally, or has been dropped.
15.The product contain battery pack, so shall not be exposed to excessive heat such as
sunshine, fire or the like.