Anker Innovations R5113 Roav Smart Car Charger F0 User Manual
Anker Innovations Limited Roav Smart Car Charger F0
User Manual
Safety Instructions SAVE THESE INSTRUCTIONS – This manual contains important safety and operating instructions for the car charger (Model R5113). Please read and understand all instructions before using this product. If damage is caused by failure to follow the instructions, the warranty does not apply. Owner’s Manual Roav Smart Car Charger F0 • Read all instructions and cautionary markings before using this product. • Do not expose to rain, moisture, or snow. • Use of an attachment is not recommended or sold by the manufacturer may result in a risk of fire, electric shock, or injury to persons. • Do not operate this car charger if it has received a sharp blow, been dropped, or otherwise damaged in any way; take it to a qualified service person. • Do not disassemble this car charger; take it to a qualified service person when service or repair is required. Incorrect reassembly may result in a risk of electric shock or fire. • To reduce risk of electric shock, unplug this car charger before attempting any maintenance or cleaning. Turning off controls will not reduce this risk. • To reduce risk of fire or electric shock, do not interconnect output terminations. • Avoid long exposure to direct sunlight, which may cause damage to the device. • Exposing this product to open flames may cause it to explode. • Do not use this product in strong magnetic fields. • Use a dry, soft lint-free cloth to clean. Do not use any corrosive cleaner or oil to clean. • CAUTION - For continued protection against risk of fire, replace only with the same type and ratings of fuse, fuse rating is 32V DC / 5A. • Always obey traffic laws and pay attention to the road. Do not attempt to use this device while driving, as some features are limited while the vehicle is in motion. Failure to pay full attention to the operation of your vehicle could result in death, serious injury or property damage. You assume total responsibility and risk for using this device. • • • • • Consignes de sécurité importantes • CONSERVEZ CES CONSIGNES - Ce manuel contient d'importantes instructions de sécurité et d'utilisation relatives au chargeur de voiture modèle R5113. • Veuillez lire et comprendre toutes les instructions avant d'utiliser ce produit. Si le non-respect des instructions entraîne des dommages, la garantie ne s'appliquera pas. • Lisez toutes les instructions et les mises en garde avant d'utiliser ce produit. • Ne pas exposer à la pluie, l'humidité ou la neige. • L'utilisation d'un accessoire non recommandé ou vendu par le fabricant peut entraîner un risque d'incendie, de choc électrique ou de blessure. • Ne pas utiliser ce chargeur de voiture s'il a reçu un coup • violent, s'il est tombé ou s'il a été endommagé de quelque façon que ce soit ; l’apporter à un technicien qualifié. Ne pas démonter ce chargeur de voiture ; l’apporter à un technicien qualifié lorsqu’une réparation est nécessaire. Un réassemblage incorrect peut entraîner un risque d'électrocution ou d'incendie. Pour réduire les risques d'électrocution, débrancher le chargeur de voiture avant d'effectuer toute opération d'entretien ou de nettoyage. La désactivation des commandes ne réduit pas ce risque. Pour réduire les risques d'incendie ou d'électrocution, ne pas interconnecter les terminaisons de sortie. Éviter toute exposition prolongée à la lumière directe du soleil, qui pourrait endommager l'appareil. L'exposition de ce produit à des flammes nues peut provoquer son explosion. Ne pas utiliser ce produit dans des champs magnétiques puissants. Utiliser un chiffon sec, doux et non pelucheux pour le nettoyage. Ne pas utiliser de nettoyant corrosif ni d'huile. ATTENTION - Pour une protection continue contre les risques d'incendie, ne remplacer le fusible que par un fusible de même type et de même spécification. Le fusible utilisé est de 32V DC / 5A. At a Glance • Exposing this product to open flames may cause explosion. • Do not use the product in strong magnetic field. Introduction • Use clean, soft cloth to clean. Do not use any corrosive cleaner/oil to clean. • Keep your attention on the road. Do not operate the controls of this product while driving. Features • Hands-free call • Streaming music to a car stereo via FM transmission or the AUX-Out socket • Charging via Two USB charging ports USB charging port • Anker PowerIQ technology for faster device charging LED display Microphone LED indicators What’s Included Status / FM frequency flashes alternately FM frequency is displayed FM frequency flashes No Bluetooth connection detected Bluetooth connected Enter FM mode Incoming call In a call in hands-free mode In a call through smartphone Owner’s Manual Roav Smart Car Charger F0 • Keep these instructions. • Do not drop, puncture or disassemble this product. Roav Smart Car Charger F0 • This product shall not be exposed to dripping or splashing. • Avoid long exposure to direct sunlight, which may cause damage. Manual / Multifunction button AUX-Out socket Car charger adapter Press and hold Model: R5113 51005000977 V01 for 3 seconds to power on/off. Get Started Make HandsFree Calls Play Music Specifications between the equipment and receiver. (3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. (4) Consult the dealer or an experienced radio/TV technician for help. Notice FCC Radio Frequency Exposure Statement Plug Roav smart car charger F0 into your vehicle’s cigarette lighter socket. Start your vehicle’s engine and the LED display will light up. / FM frequency will flash alternatively. Once you have completed step , you should hear a “waiting to pair” voice prompt. Turn on the FM radio on your car audio deck and tune to an unoccupied frequency (you should hear white noise). Press and hold the multifunction button on car charger until the FM frequency flashes. Press or hold until the transmitting frequency matches the frequency your car stereo is tuned to. Answer / End a call Press Reject a call Press and hold for 1 second Charge Your Devices FM Roav F0_XXXX AUX IN AUX OUT Play / Pause Press Previous / Next track Press FM This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. DC input: 12V - 24V 4.8A max Bluetooth transmission distance: 10 m / 393.7 in Operating temperature range: -20°C to 40°C / -4°F to 104°F 2.4A 2.4A AUX IN 10 support@goroav.com +1(800) 988 7973 (US) Mon-Fri 9:00-17:00 (PT) This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: (1) Reorient or relocate the receiving antenna. (2) Increase the separation Storage temperature range: -40°C to 85°C / -40°F to 185°F 11 12 12-month limited warranty Lifetime technical support Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. FM transmission range: 2 m / 78.7 in The car charger is equipped with two USB charging ports. You can charge two devices simultaneously with a maximum output of 5V/4.8A. The device has been evaluated to meet general RF exposure requirements. The device can be used in fixed/mobile exposure condition. The min separation distance is 20cm. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Bluetooth: V4.2 FM frequency range: 87.5-108 MHz music , you can connect a 3.5 mm AUX cable (not provided) to the AUX-Out socket of the Roav smart car charger and the AUXIn socket of your car's audio system. Enable Bluetooth on your smartphone and search for available Bluetooth devices. Select “Roav F0_XXXX” and connect. Once successfully connected, FM frequency will be displayed. Once you have completed step , you should hear a “successfully paired” voice prompt. FCC Statement Specifications are subject to change without notice. Power output: 5V To further reduce echo and cabin noise on your calls and FM When the car charger is successfully connected with your smartphone, you can enjoy convenient hands-free call. When the car charger is successfully connected with your smartphone, you can play music from your phone. Music can then be streamed to your car's audio system via FM transmitter or Aux-Out socket. Roav F0_XXXX Customer Service @GoRoav 13 @GoRoav 14
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 5.6-c011 79.156289, 2014/03/31-23:39:12 Create Date : 2018:05:15 18:34:09+08:00 Metadata Date : 2018:05:15 18:34:14+08:00 Modify Date : 2018:05:15 18:34:14+08:00 Creator Tool : Adobe InDesign CC 2014 (Windows) Instance ID : uuid:6fbffba4-38e3-4548-9048-159cd1b050a3 Original Document ID : xmp.did:30e524c4-f1fc-ff4d-8894-1b26cd427274 Document ID : xmp.id:6684ee55-f86d-5e4a-8a2b-f15396d0d7bc Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:a38fca27-629e-ca4f-aaa6-aa78d2f1a805 Derived From Document ID : xmp.did:cb8cb2d3-920d-f84b-8d3d-406dd33cc638 Derived From Original Document ID: xmp.did:30e524c4-f1fc-ff4d-8894-1b26cd427274 Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CC 2014 (Windows) History Changed : / History When : 2018:05:15 18:34:09+08:00 Format : application/pdf Producer : Adobe PDF Library 11.0 Trapped : False Page Count : 2 Creator : Adobe InDesign CC 2014 (Windows)EXIF Metadata provided by EXIF.tools