Anker Innovations T8900 Entry Sensor ( with 920 MHz transmitter ) User Manual

Download:
Mirror Download [FCC.gov]
Document ID	4000834
Application ID	6eJ97ZYHmCV1NJOWdEUb7g==
Document Description	user manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	61.16kB (764482 bits)
Date Submitted	2018-09-11 00:00:00
Date Available	2018-09-11 00:00:00
Creation Date	2018-09-05 10:59:43
Producing Software	Adobe PDF Library 11.0
Document Lastmod	2018-09-10 15:42:10
Document Title	user manual
Document Creator	Adobe InDesign CC 2014 (Windows)

Quick Start Guide
Entry Sensor
Anker Innovations Limited. All rights reserved. eufy and the eufy logo are
trademarks of Anker Innovations Limited, registered in the United States
and other countries. All other trademarks are the property of their respective
owners.
51005001216 V01
For Entry Sensor Installation:
Entry Sensor
(T8900)
Sensor Magnet CR123A Battery
Mounting Screws
1. Entry Sensor is only compatible with the eufyCam Security System.
2. Make sure the region printed on your product package (A or B),
matches the region printed on your HomeBase.
Battery Placement
Remove the battery compartment lid on the Entry Sensor and insert the
provided CR123 battery. Replace the lid.
Region A or B
Region A or B
01
02
Adding Entry Sensor to Your System
Mounting the Sensor
On Eufy Security app follow the onscreen instructions to add your Eufy Security
devices. Choose Add Device, then select Entry Sensor to add it to your system.
Place the sensor on the edge of a door
or window. Use the adhesive strips (On
the back of the sensor) or mounting
screws provided to mount the sensor.
• Make sure the gap between Entry
Sensor and the sensor magnet is
less than 1.6 in (4 cm) when the
door or window is closed.
• The bottom of the sensor magnet
should align with the bottom of
Entry Sensor.
03
04
LED
Safety
Sensor LED indicator color
Entry Sensor status
Flashing white
Adding to HomeBase
Flashing white (Once)
Sensor detects an open/close activity
Flashing red (Once)
Sensor battery is low or disconnects from
HomeBase
FAQ
1.
What battery does the Entry Sensor use?
Entry Sensor uses a CR123 battery with 3V output.
2.
How long does the battery last?
One CR123 battery usually lasts up to 2 years, but depends on the usage.
Please visit our official website to download the user manual: www.eufylife.com
05
This product complies with the radio interference requirements of the
European Community.
Declaration of Conformity
Hereby, Anker Innovations Limited declares that this device is in compliance with the
essential requirements and other relevant provisions of Directive 2014/53/EU.For
the declaration of conformity, visit the Web site https://www.eufylife.com/.
Do not use the Device in the environment at too high or too low temperature, never
expose the Device under strong sunshine or too wet environment.
The suitable temperature for the product and accessories is 0°C℃-40°C℃.
RF exposure information: The Maximum Permissible Exposure (MPE) level has been
calculated based on a distance of d=20 cm between the device and the human body.
To maintain compliance with RF exposure requirement, use product that maintain a
20cm distance between the device and human body.
CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS
06
SUB-1G Frequency range:866~866.8MHz，868.2~869MHz
The following importer is the responsible party (contact for EU matters only)
Importer:Anker Technology (UK) Ltd
Importer Address:Suite B, Fairgate House, 205 Kings Road, Tyseley,
Birmingham,United Kingdom B11 2AA
This product is designed and manufactured with high quality materials and
components, which can be recycled and reused.
This symbol means the product must not be discarded as household waste,
and should be delivered to an appropriate collection facility for recycling. Proper
disposal and recycling helps protect natural resources, human health and the
environment. For more information on disposal and recycling of this product, contact
your local municipality, disposal service, or the shop where you bought this product.
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and (2)
07
this device must accept any interference received, including interference that may
cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation.
This equipment generates uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures: (1) Reorient or relocate the
receiving antenna. (2) Increase the separation between the equipment and receiver.
(3) Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected. (4) Consult the dealer or an experienced radio/TV technician
for help.
FCC Radio Frequency Exposure Statement
08
The device has been evaluated to meet general RF exposure requirements. The
device can be used in fixed/mobile exposure condition. The min separation distance
is 20cm.
The following importer is the responsible party
Company Name: POWER MOBILE LIFE, LLC
Address: 400 108th Ave NE Ste 400, Bellevue, WA 98004-5541
Telephone:1-206-383-8247
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause
undesired operation of the device."
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux
appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions
suivantes:
(1) l'appareil nedoit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même
si le brouillage est susceptible d'en compromettre le fonctionnement."
09
Customer Service
• Warranty
12-month limited warranty
• Call Us
United States
+ 1 (800) 988 7973
Mon-Fri 9AM-5PM (PT)
United Kingdom +44 (0) 1604 936 200 Mon-Fri 6AM-11AM (GMT)
Germany
+49 (0) 69 9579 7960 Mon-Fri 6:00-11:00
• Email Us
Customer Support: support@eufylife.com
10
Any changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate this equipment.
11
12

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.4-c006 80.159825, 2016/09/16-03:31:08
Create Date                     : 2018:09:05 10:59:43+08:00
Metadata Date                   : 2018:09:10 15:42:10+08:00
Modify Date                     : 2018:09:10 15:42:10+08:00
Creator Tool                    : Adobe InDesign CC 2014 (Windows)
Instance ID                     : uuid:f90497e4-7df5-4efe-8735-46dc55034f77
Original Document ID            : xmp.did:320a0df4-e8ec-4d4c-8969-6b4ce2e73b67
Document ID                     : xmp.id:b7ce03ac-875e-7c4f-84da-f49bb8e156eb
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:cd0d6a04-b721-d84e-b99e-08e0dff1610a
Derived From Document ID        : xmp.did:6b65d3a5-945a-1349-9e06-f88babb00e1d
Derived From Original Document ID: xmp.did:320a0df4-e8ec-4d4c-8969-6b4ce2e73b67
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CC 2014 (Windows)
History Changed                 : /
History When                    : 2018:09:05 10:59:43+08:00
Format                          : application/pdf
Producer                        : Adobe PDF Library 11.0
Trapped                         : False
Page Count                      : 8
Creator                         : Adobe InDesign CC 2014 (Windows)

EXIF Metadata provided by EXIF.tools