Anker Technology A7912 Bluetooth Speaker User Manual

Anker Technology Co., Limited Bluetooth Speaker

User Manual

Outdoor Bluetooth SpeakerPackage ContentsAnker Outdoor Bluetooth Speaker1ft Micro USB charging cableMetal hookTravel pouchWelcome GuideProduct Features●Enjoy music when hiking, rafting, at the poolside, in the shower and more with thissplashproof outdoor speaker.●10 hour non-stop play time lets you listen to your music through the day.●Connects automatically to the last connected Bluetooth device whenever powered on.●Bluetooth 4.0 enables high definition audio, backward compatible with all Bluetoothversions.●Micro SD card reader lets you play your music without using your phone.●Previous / Next Song, Volume, and Play / Pause buttons provide device-free control.SpecificationsModel A7912Bluetooth Standard 4.0Waterproof Level IPX 4Product Weight 263g / 9.3ozProduct Size 181.0 × 41.6 × 41.6mm / 7.1 × 1.6 ×1.6inPlay Time 10 hoursCharge Time 3 hoursInput 5V / 500mAOperating Range 10m / 33ftSpeaker Output Power 1.5W × 2Supported BluetoothProfilesHSP, HFP, A2DP, AVRCP
Product Overview1. Status Indicator2. Play / Pause3. Volume Up / Next Song4. Volume Down / Previous Song5. Power / Function Button6. Micro SD Card Slot7. Micro USB Charging Port8. Battery IndicatorHowtoPairwithYourDevice1. Press the power button for 3 seconds. The speaker will turn on and automatically enterpairing mode indicated by the flashing blue LED.2. Activate your device’s Bluetooth function and search for the device.3. Once the Bluetooth speaker has been detected, select the product name “Anker A7912” toconnect. (For devices with Bluetooth versions earlier than 3.0, press “Yes” to confirm pairing.Enter a passkey or PIN code “0000” (4 zeros), then press the “Yes” or “OK” key to finishpairing.)4. When the Bluetooth speaker and your device are successfully paired, the blue LED will goon and remain on while connected.When turning on the speaker, it will automatically connect to the last connected device aslong as Bluetooth is still enabled. Before pairing with another device, disable the Bluetoothfunction on the previous device and the speaker will automatically return to pairing mode.
Note: To switch to SD card mode, simply insert your Micro SD card when instandby or Bluetooth mode. The speaker enters Bluetooth mode by default whenturning on the speaker or when a Micro SD card is not inserted.Button FunctionsFunctions ButtonTurn the Speaker On /OffHold Power ButtonAnswer / End a Call Press Play / PauseReject a Call Hold Play / Pause for 2 seconds.Turn Volume Up / Down Press “∧”or“∨”Play Previous / NextSongHold “∨”or“∧”Delete Pairing Record Hold “∨”and“∧”for2secondsSwitch to SD Card Mode Hold Play / Pause for 3 seconds.HowtoRechargeYourSpeakerWhen the battery is low, the speaker will beep once and the red indicator will flash for about10 minutes.1. Plug the Micro USB cable into the speaker’s Micro USB charging port.2. Insert the remaining end of the USB charging cable into (a) a USB AC adapter (not included)connected to a wall socket, or (b) a charging computer USB port. A steady red batteryindicator will show that it is charging.3. When fully charged, the red battery indicator will go off.LED IndicatorsIndicator StatusBluetooth IndicatorFlashing blue In pairing mode
Blue Connected to a deviceFlashing red Low batteryOff Micro SD Card modeBattery IndicatorRed ChargingOff Fully chargedUsage Tips1. Power off the speaker when not in use and before storing.2. The operational range of the speakers may be influenced by obstructions such as walls andpillars. To ensure a stable connection, we recommend avoiding such obstructions wheneverpossible and/or shortening the distance during use.3. To protect the long term performance of the battery, avoid placing the speaker intemperatures exceeding 140°F/60°C such as in a hot vehicle or under direct sunlight.4. Do not submerge the speaker in water or other liquids. It can resist splashes from all directionsup to IPX levelFAQ and Solutions1. What should I do if the speaker doesn’t connect to my device?Check to ensure your device’s Bluetooth function is enabled and is within 3ft/1m of thespeaker.Delete the pairing record(s) on the speaker or your device and try again.2. Can I use the speaker to play music while charging?To protect the long-term performance of the battery, it is better to charge while the speakeris turned off, especially when the battery is low.3. What should I do if the speaker disconnects from my device?Try turning off the speaker, and pair with your device again.FCC Statement :This device complies with Part 15 of the FCC Rules. Operation is subject to the following twoconditions:(1) This device may not cause harmful interference, and(2) This device must accept any interference received, including interference that may causeundesired operation.Warning: Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.NOTE: This equipment has been tested and found to comply with the limits for a Class Bdigital device, pursuant to Part 15 of the FCC Rules. These limits are designed to providereasonable protection against harmful interference in a residential installation.This equipment generates uses and can radiate radio frequency energy and, if not installedand used in accordance with the instructions, may cause harmful interference to radiocommunications. However, there is no guarantee that interference will not occur in aparticular installation. If this equipment does cause harmful interference to radio ortelevision reception, which can be determined by turning the equipment off and on, the useris encouraged to try to correct the interference by one or more of the following measures:Reorient or relocate the receiving antenna.Increase the separation between the equipment and receiver.Connect the equipment into an outlet on a circuit different from that to which the receiveris connected.Consult the dealer or an experienced radio/TV technician for help.RF warning statement:The device has been evaluated to meet general RF exposure requirement. The device can beused in portable exposure condition without restriction.

Navigation menu