Anker Technology T9142 BodySense Smart Scale Lite User Manual
Anker Technology Co., Limited BodySense Smart Scale Lite
User Manual
Important Safety Instructions Read all instructions before using the device. Keep the manual for future reference. Only use the device as described in this user manual. Any misuse may cause electric shocks, burns, start a fire or other unexpected hazards. Children should not play with the appliance. Cleaning and user maintenance should not be done by children without supervision. Be aware that this device is designed for individuals to measure their weight. Any information provided by this device is in no way meant to treat, cure, or prevent diseases or illnesses from happening. The device is equipped with a data transmission function that emits electromagnetic energy. Portable Radio Frequency (RF) communications equipment (including peripherals such as antenna cables and external antennas) should not be used within 30 cm (12 inches) of the device, otherwise, performance may be affected. Do not modify this device. Do not expose this device to extreme temperatures, direct sunlight, moisture, or corrosive environments. Do not mix and use different types of batteries together e.g. lithium-ion (Li-ion) and nickel-metal hydride (NiMH) batteries. Do not mix new and used batteries. To prevent slipping, do not step on the device after bathing or showering. This device should not be used when it is adjacent to or stacked on top of another device because it could cause the device to operate improperly. If such use is necessary, this device and the other device should be observed to verify that they are operating normally. This device is powered by three AAA batteries. Do not attempt to recharge non-rechargeable batteries as this can cause the batteries to leak or explode. This device can be powered by rechargeable batteries. Used batteries should be placed in a sealed plastic bag and disposed of safely according to local environmental regulations. If the device will not be used for an extended period of time, remove batteries before storing the device in a cool and dry place. Usage Tips: To ensure measurement accuracy, follow the instructions below when you start your measurement: Place the scale on a flat, hard surface. Soft surfaces such as carpeting will affect the performance of the scale. Step on the platform with bare feet. Stand still until the measurement is complete. For the most consistent measurements, weigh yourself at the same time of day and location. Notice This symbol means the product must not be discarded as household waste, and should be delivered to an appropriate collection facility for recycling. Proper disposal and recycling helps protect natural resources, human health and the environment. For more information on disposal and recycling of this product, contact your local municipality, disposal service, or the shop where you bought this product. This symbol means âRefer to instruction manual or bookletâ. FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: (1) Reorient or relocate the receiving antenna. (2) Increase the separation between the equipment and receiver. (3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. (4) Consult the dealer or an experienced radio / TV technician for help. RF Warning Statement The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction. SM-A560-V01
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Create Date : 2017:07:28 09:20:54+08:00 Creator : Adobe Acrobat Pro 9.0.0 Modify Date : 2017:07:28 09:20:54+08:00 XMP Toolkit : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00 Metadata Date : 2017:07:28 09:20:54+08:00 Creator Tool : Adobe Acrobat Pro 9.0.0 Format : application/pdf Document ID : uuid:71e65f56-ef31-48df-baa7-5e1ffd3c7691 Instance ID : uuid:4c52aeb0-2ffe-451b-b7b4-cce637c0b32a Producer : Adobe Acrobat Pro 9.0.0 Page Count : 4 For : macPro10, Title : T9142_EN_Safety_ SM-A560-V01_20170614_105x144mm.ai Bounding Box : -169 -316 428 59 Container Version : 11 Creator Version : 16EXIF Metadata provided by EXIF.tools