Anritsu Mt8852A Users Manual HOW TO USE THIS

2015-02-05

• MT8850A / MT8852A Bluetooth Test Set
• Warranty
• Limitation of Warranty
• Trademark Acknowledgments
• Notice about Documentation
• Safety Symbols
  • • Symbols Used in This Manual
    • Safety Symbols Used on Equipment and In Manuals
• For Safety
• Declaration of Conformity
  • Table of Contents
• General Information
  • Scope of this Manual
  • Software Versions
  • Identification Number
  • Bluetooth Test Set Options and Accessories
    • Included accessories
    • Options and Accessories
  • Notation Conventions Used in This Manual
• Product Overview
  • About Bluetooth
  • The MT8850A/MT8852A
    • MT8850A/MT8852A Features
    • BlueSuite Analysis Software
• Installation
  • Introduction
  • Initial Inspection
  • Power Requirements
    • AC Line Power
    • Fuse Protection
    • Grounding
  • Environmental Requirements
  • Rack Mounting
    • Single Unit Rack Mounting (Option 01)
    • Tools Required
    • Assembly Procedure
    • Side-by-Side Rack Mounting (Option 03)
      • • Kit Parts List
        • Tools Required
        • Assembly Procedure for fitting a ML2430A to another ML2430A
  • Storage and Shipment
    • Preparation For Storage
    • Environmental Requirements
    • Preparation for Shipment
  • Anritsu Service Centers
• Connections
  • Introduction
  • Front Panel Connectors
  • Rear Panel Connectors
• Front Panel Operation
  • Introduction
  • Front Panel Controls
  • Power-On Procedure
  • Hard and Soft Keys
    • Hard keys
    • Soft Keys
  • Choosing Screen Entries
  • Entering Data at the Keypad
• Getting Started
  • Preparing the MT8850A/MT8852A for Use
  • Selecting a Test Script
  • Specifying the EUT Address
  • Selecting the Test Mode
  • Running a Single Test
  • Running a Script in Standard Mode
  • Running a Script in Single Payload Mode
  • Running a Script in Null Packets Mode
• Configuring the MT8850A/MT8852A
  • Introduction
  • Setting up the EUT
    • Viewing the EUT Address and User Friendly Name
    • Viewing Supported Features
    • Setting Up the EUT Control
    • Setting Up Inquiries
    • Setting Up Authentication
    • To make an Inquiry:
  • Setting up the MT8850A/MT8852A
    • Displaying the Identity of the MT8850A/MT8852A
    • Configuring the System Interfaces
    • Setting the Screen Display and Sound
    • Setting Up the Signal Generator
    • Setting Up the Bluetooth Interferer
    • Configuring the Rear Panel Outputs (MT8852A only)
    • Performing Continuous Wave Measurement
    • Setting the Range Hold
    • Setting the modulation index
    • Setting Up the Link Timeout
    • Setting Up the IF Bandwidth Filter
  • Setting Up Test Script Operation
  • System features
    • Setting the Link
    • Updating the Software
    • Errata 1158
  • Service
• Using the Script Menu
  • Introduction
  • Accessing the Script Menu
  • Locking and Unlocking a Script
  • Changing the Password
  • Running the Tests
  • Setting Up General Script Parameters
    • Test control delay
    • Test Pause Test Control
    • EUT Settings on Connection
    • Setting the Path Offset
    • Creating or Editing a Path Offset Table
  • Testing in Standard Script Mode
    • Output Power Test (Standard Mode)
    • Power Control Test (Standard Mode)
    • Initial Carrier Test (Standard Mode)
    • Carrier Drift Test (Standard Mode)
    • Single Slot Sensitivity Test (Standard Mode)
    • Multi-Slot Sensitivity Test (Standard Mode)
    • Modulation Index Test (Standard Mode)
    • Maximum Input Power Test (Standard Mode)
  • Testing in Single Payload Script Mode
    • Output Power Test (Single Payload Mode)
    • Power control test (single payload mode)
    • Initial Carrier Test (Single Payload Mode)
    • Carrier Drift Test (Single Payload Mode)
    • Single Slot Sensitivity Test (Single Payload Mode)
    • Multi-Slot Sensitivity Test (Single Payload Mode)
    • Modulation Index Test (Single Payload Mode)
    • Maximum input power test (single payload mode)
  • Entering the BT Address of the EUT
  • Viewing Test Results
    • Output Power Test Results
      • • Definition of test results
    • Power Control Test Results (standard and null packet modes)
      • • Definition of test results
    • Initial Carrier Test Results
      • • Definition of test results
    • Carrier Drift Test Results
      • • Definition of test results
        • Definition of test results
    • Single Slot Sensitivity Results
      • • Definition of test results
    • Multi Sensitivity Test Results
      • • Definition of test results
    • Modulation Index Test Results
    • Maximum Input Power Test Results
      • • Definition of test results
• Audio Measurements (MT8852A only)
  • Testing the EUTfs Audio Performance Using Remot
  • Testing the Audio Performance of the EUT Transmit Path
  • Testing the Audio Performance of the EUT Receive Path
  • Putting the EUT into Remote Loopback
    • • • • Top-line Messages
  • Introduction
  • Message Types
  • Message Priorities
  • Error Codes
  • HCI and Communication List of Error Codes
  • Internal HCI and Communication List of Error Codes
    • • • • Preset Values
          • Specification
  • Transmitter Tests
  • Receiver Tests
  • Output Power
  • Power Control
  • Modulation Characteristics
  • Initial Carrier Frequency Tolerance
  • Carrier Frequency Drift
  • Sensitivity - Single Slot Packets
  • Sensitivity - Multi-Slot Packets
  • Maximum Input Level
  • MT8850A/MT8852A Signal Generator
    • Frequency
    • Level
    • Modulation
  • MT8850A/MT8852A Measuring Receiver
    • Frequency
    • Level
    • Modulation
  • EUT Control Interface
  • Audio Specifications (MT8852 only)
  • Frequency Standard
  • Rear Panel Connectors
  • GPIB
  • RS 232
  • Power Requirements
  • Environmental
  • Size and Weight
  • Ordering Information
    • • • • Bit and Frame Error Rates
          • Connector Care and Handling
            • • N connector pin depth definition
      • Index