Anviz Technology T5 Fingerprint & RFID Reader User Manual

Download:
Mirror Download [FCC.gov]
Document ID	4100397
Application ID	zhA/TJKMdapAteP4X72S5w==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	138.77kB (1734612 bits)
Date Submitted	2018-12-10 00:00:00
Date Available	2018-12-10 00:00:00
Creation Date	2018-12-07 11:43:32
Producing Software	Acrobat Distiller 7.0 (Windows)
Document Lastmod	2018-12-07 11:44:33
Document Title	閼昏鲸鏋冭箛顐︹偓鐔稿瘹閸?M5_V1.4-F.02.02185-161013
Document Creator	PScript5.dll Version 5.2
Document Author:	Administrator

Shanghai Anviz Technology Co.,Ltd.
T5
Fingerprint & RFID Reader
V1.5
Access Control Reader & Power Supply
Package list
1 Reader
Instruction Package
Accessory Package
Connector Jack
P1
Port
PIN
Access Control Reader & Switch Power Supply
P3
P1
Port
PIN
P3
ৰ⦈୹ॗ▲ѽߑ
Function
Power Supply
Output Controller GND
Exit Door
Button sensor
Connector
+12V GND
NO
OPEN DOOR
੸ঔࢎԥ
2 ૏‫މ‬ԕ
1 Пфս
12V COM
‫݇ރ‬ি
୆ўԕ
c/
0/
OK
/M
CH
EN
COMPACT
CD-ROM
FOR
windows
Windows 2000
98
Windows
Windows
XP
Windows
Windows
7Vista
Copyright
ANVIZ All rights reserved.
http://www.anviz.com
P1
P2
P3
P4
‫੸؍‬ॐ۞֣
‫࠵੸؍‬௢
৐ऄ֘
FOR
ি
ऄ࢛
COM
NC
NO
ோ਩
COMPACT
CH
‫ݔ‬ଚ
ঠ௲
CD-ROM
GND
ঠ঱
windows
Windows 98
Windows 2000
Windows XP
Windows Vista
ऄ࢛DC12V
ԅਈ
ি
ோ਩
‫ݔ‬ଚ
ஷ߿
৕
DATA0
ԅਈ
P4
ি
୹्
ӟ୹ܷ୚
௲
GND
௰
RS485A
ভ
௲
RS485B
GND
ோ਩
‫ݔ‬ଚ
ভ
௰
ઇՇ૿ҵ
ઇՇ૿ҵ
୹ୟ
‫֪ݎ‬
ோ਩
ग
ग
ઇՇ૿ӟ
ઇՇ૿ӟ
௲
‫ݔ‬ଚ
৐ऄ֘
৕
ࠧ
੒
૿ӟ
ஷ߿ DATA1 ૿ӟ
ग
ি
COM GND
Connector
COM GND
OPEN DOOR
+12V
NO
GND
NC
P2
ஷ߿૿ӟ
RS485
P3
ԅਈ
NC
Windows 7
COM
7 DC12V
8 DC12V
⣬ᘷ
㔝⭫ಞ
TCP/IP
P4
Exit Door
Button sensor
Output Controller
Access control
按后挂板孔位在墙上进行钻孔
EN
ԅਈ
৐ऄ֘ 7
P3
GND
Power Supply
安装固定后挂板，接好相关连线
P1
P3
12V COM
12V COM
P3
Function
固定主机
‫݌‬িપ‫ޢ‬
P1
P2
12V COM
GND
P1
COM
NC/DC12V
NO/DC12V
⢯ࡡ䈪᱄φ䰞⾷ᵰᱥ儎ᓜ䳼ᡆौⲺ㋴ᇼ⭫ᆆӝ૷θԱ֋䭏䈥Ⲻ䘔᧛䜳ਥ㜳ሲ㠪
䰞⾷ᵰⲺ‫ݹ‬ಞԬᦕඅθഖ↚䘔᧛਺〃䇴༽ҁࢃθ䈭Ԋ㓼䰻䈱᧛㓵䈪᱄Ⱦ
P2
P3
RJ45 USB
Relay State
Relay State
Diode
Installation Diagram
Installation Steps:
Door Sensor
+Diode
Drill holes in the wall follow the hole position on back panel
Install and fix back panel, connect related cables
Fix access control reader
Power on
to unlock
Power on
to unlock
Mark +12V GND PUSH NO GND
NC
Access Control Power Supply
P1
Function
PIN
Cable
Color
Red
Black
PIN
Cable
Color
Mark
Wiring Instruction
The interface marked with
for specific models,
Please according to the practical device to wiring.
Power off
to unlock
Power off to unlock
+12V GND
Door Sensor
Switch Power Supply
Description
DC12V
Access Control Reader & Controller
Communicate with PC
Power
GND
Function
P2
PIN
P1
P3
Relay states
RJ45(TCP/IP)
COM 12V
COM 12V
RS485
P3
P3
Relay
Relay
COM
NC
NO
COM
NC (DC12V)
NO (DC12V)
P2
Description
Green
Wiegand DATA0 Output
White
Wiegand DATA1 Output
Black
GND
Yellow
RS485A
Purple
RS485B
Black
GND
Wiegand
Output
P1
Port
P2
Function
Power Supply
Connector
+12V GND
RS485
Wiegand Output
GND RS485B RS485A GND
D1
D0
RS485
TCP/IP
P3
Select either
12 volt out on
COM or voltage
free contact.
Function
PIN
Cable
Color
Description
Door Sensor
Purple
Trigger Input
Exit Button
Yellow
Trigger Input
White
White
GND
Relay
Black
GND
Green
COM
Orange
NC
Blue
NO
GND
Mark
D1
D0
Mark
+12V GND
Mini-USB
Important notice: Please carefully follow this wiring diagram, If the reader gets damaged by
incorrect wiring then your warranty will be void.
Switch Power
Access control
（Note: Please verify master card to
enable the USB communication function)
V1.5
Reader Appearance
Add Card+Fingerprint: (Operation Steps show as figure 1.3)
After registered you can continue register another user
or swipe enroll card save and exit.
Underneath:
LED
Continue to register
Mini USB Port
Card Reader Area
145mm
Swipe the card here.
Reset Button
Notice:When swipe card, Red LED flashes
twice with two long beeps means the User
Card have been registered.
Place finger
Swipe
User Card
Swipe Enroll
Card, begin
There are three colours
for device status: Red,
Blue and Green.
Blue LED
flashes
Place finger
again, please
Swipe Enroll
Card,end
Blue LED flashes
Blue LED flashes
Green LED lights up
fast and FingerPrint fast and FingerPrint Four short beeps
sensor lights up
sensor lights up
Registration Successed
Figure 1.3
Fingerprint Sensor
Delete User:
Screw Hole
Place the finger here.
37mm
55mm
Place finger
Card, begin
Illustration for placing finger
Correct method
Continue to delete
Delete fingerprint only: (Operation Steps show as figure 1.4)
After delete you can continue delete another user or swipe
Delete Card save and exit.
Swipe Delete
Notice: When place finger, Red LED
flashes with long beep means the
fingerprint does not exist in the device.
( Straighten your finger and then place it on the sensor ensuring the finger is down flat and covers the entire sensor window) :
Red LED flashes
fast and FingerPrint
sensor lights up
Place finger
again, please
Red LED flashes
fast and FingerPrint
sensor lights up
Swipe Delete
Card, end
Green LED lights up
Four short beeps
Delete Successed
=Figure 1.4
Always place finger in
the center of the sensor.
Make sure you cover the entire sensor surface
with as much of your finger as possible.
Delete Card / Card+Fingerprint: (Operation Steps show as figure 1.5)
After delete you can continue delete another user or swipe
Delete Card save and exit.
Incorrect method :
Swipe Delete
Card, begin
DO NOT move your finger
before the backlights of
sensor turns off.
DO NOT place finger
away from the center
of the sensor window.
DO NOT place finger
at an angle.
DO NOT take off finger
during the fingerprint
verification process.
DO NOT use just
your fingertip.
Notice: When swipe card, Red LED
flashes with long beep means the
fingerprint does not exist in the device.
DO NOT slide your finger
during the fingerpint
verification process.
Continue to delete
Swipe
User Card
Red LED flashes
Swipe User Card
again, please
Red LED flashes fast
Operation Guide
Figure 1.5
Swipe Delete
Card, end
Green LED lights up
Four short beeps
Delete Successed
DC 12V supply the power for device. Blue LED flashes fast and Fingerprint Sensor lights with beeps.
There are 4 cards in the packing: Enroll Card
Delete Card
User Card
* 2
Function button
Function Button
Add Fingerprint Only: (Operation Steps show as figure 1.1)
After registed you can continue register another user or swipe
Enroll Card save and exit.
Press the button until heard beeps, that eliminate Enroll Card and Delete Card information in the device. After that
MUST register management cards (Enroll Card and Delete Card) to run the machine.
Continue to register
Place finger
Swipe Enroll
Card, begin
Place finger
again, please
Swipe Enroll
Card, end
Function Button
Notice: When place finger, Red LED flashes
with two long beeps means the finger
have been registered.
Blue LED
flashes
Blue LED flashes fast
and FingerPrint
sensor lights up
Green LED lights up
Four short beeps
Registration Successed
Figure 1.1
Notice: The operation will not delete any user data stored in the device.
Register Management Cards (Enroll Card and Delete Card)
Add Card Only: ( Operation Steps show as figure 1.2)
After registed you can continue register another user or swipe
Enroll Card save and exit.
Continue to register
Swipe Delete
Card
Swipe Enroll
Card
Swipe
User Card
Swipe Enroll
Card, begin
Swipe User Card
again, please
Swipe Enroll
Card, end
Notice:When swipe card, Red LED flashes
twice with two long beeps means the User
Card have been registered.
In orginal state
Blue LED flashes
Blue LED
flashes
Blue LED flashes fast
and FingerPrint
sensor lights up
Figure 1.2
Green LED lights up
Four short beeps
Registration Successed
Green LED lights
Four short beeps
Red LED lights
Figure 1.6
Green LED lights
Four short beeps
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of
the following measures:
Ь Reorient or relocate the receiving antenna.
Ь Increase the separation between the equipment and receiver.
Ь Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
Ь Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved
by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
The device has been evaluated to meet general RF exposure requirement.
Company: U-tec Group Inc.
Address: 44292 Fremont Blvd, Fremont, CA 94538
Name: Kevin Zhu
Position: Product Manager
Tel: 844-439-8832
Fax: 844-439-8832
Email: kevin@u-tec.com
Web: www.u-tec.com

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
XMP Toolkit                     : 3.1-701
Startup Profile                 : Print
Producer                        : Acrobat Distiller 7.0 (Windows)
Create Date                     : 2018:12:07 11:43:32+08:00
Modify Date                     : 2018:12:07 11:44:33+08:00
Metadata Date                   : 2018:12:07 11:44:33+08:00
Creator Tool                    : PScript5.dll Version 5.2
Thumbnail Width                 : 104
Thumbnail Height                : 256
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 10332 bytes, use -b option to extract)
Document ID                     : uuid:0AAC1142D2F9E811BA9FE4F39195BAD2
Instance ID                     : uuid:4de2e512-5a1d-46a4-a5fc-46565a7ca764
Derived From Instance ID        : uuid:18acacf9-5b98-43e7-9a7c-b55e319c0450
Derived From Document ID        : uuid:E92A5C2679F4E81180C286DF0D94C8AB
Has Visible Overprint           : False
Has Visible Transparency        : True
N Pages                         : 1
Max Page Size W                 : 12.999811
Max Page Size H                 : 12.000025
Max Page Size Unit              : Centimeters
Font Name                       : ArialMT, SegoeUI-Light, SegoeUI, SegoeUI-Bold, STZhongsong, AdobeSongStd-Light, MicrosoftYaHei
Font Family                     : Arial, Segoe UI, Segoe UI, Segoe UI, 华文中宋, Adobe 宋体 Std, 微软雅黑
Font Face                       : Regular, Light, Regular, Bold, Regular, L, Regular
Font Type                       : Open Type, Open Type, Open Type, Open Type, Open Type, Open Type, Open Type
Font Version                    : Version 5.06, Version 5.00, Version 5.05, Version 5.05, Version 1.02, Version 5.017;PS 5.002;hotconv 1.0.67;makeotf.lib2.5.33168, Version 6.02
Font Composite                  : False, False, False, False, False, False, False
Font File Name                  : arial.ttf, segoeuil.ttf, segoeui.ttf, segoeuib.ttf, STZHONGS.TTF, AdobeSongStd-Light.otf, msyh.ttf
Plate Names                     : Cyan, Magenta, Yellow, Black
Swatch Group Name               : 默认色板组, 灰色, 明亮
Swatch Group Type               : 0, 1, 1
Swatch Colorant Swatch Name     : 白色, 黑色, CMYK 红, CMYK 黄, CMYK 绿, CMYK 青, CMYK 蓝, CMYK 洋红, C=15 M=100 Y=90 K=10, C=0 M=90 Y=85 K=0, C=0 M=80 Y=95 K=0, C=0 M=50 Y=100 K=0, C=0 M=35 Y=85 K=0, C=5 M=0 Y=90 K=0, C=20 M=0 Y=100 K=0, C=50 M=0 Y=100 K=0, C=75 M=0 Y=100 K=0, C=85 M=10 Y=100 K=10, C=90 M=30 Y=95 K=30, C=75 M=0 Y=75 K=0, C=80 M=10 Y=45 K=0, C=70 M=15 Y=0 K=0, C=85 M=50 Y=0 K=0, C=100 M=95 Y=5 K=0, C=100 M=100 Y=25 K=25, C=75 M=100 Y=0 K=0, C=50 M=100 Y=0 K=0, C=35 M=100 Y=35 K=10, C=10 M=100 Y=50 K=0, C=0 M=95 Y=20 K=0, C=25 M=25 Y=40 K=0, C=40 M=45 Y=50 K=5, C=50 M=50 Y=60 K=25, C=55 M=60 Y=65 K=40, C=25 M=40 Y=65 K=0, C=30 M=50 Y=75 K=10, C=35 M=60 Y=80 K=25, C=40 M=65 Y=90 K=35, C=40 M=70 Y=100 K=50, C=50 M=70 Y=80 K=70, AutoCAD Color, AutoCAD Color 4, AutoCAD Color 6, AutoCAD Color 8, C=0 M=0 Y=0 K=100, C=0 M=0 Y=0 K=90, C=0 M=0 Y=0 K=80, C=0 M=0 Y=0 K=70, C=0 M=0 Y=0 K=60, C=0 M=0 Y=0 K=50, C=0 M=0 Y=0 K=40, C=0 M=0 Y=0 K=30, C=0 M=0 Y=0 K=20, C=0 M=0 Y=0 K=10, C=0 M=0 Y=0 K=5, C=0 M=100 Y=100 K=0, C=0 M=75 Y=100 K=0, C=0 M=10 Y=95 K=0, C=85 M=10 Y=100 K=0, C=100 M=90 Y=0 K=0, C=60 M=90 Y=0 K=0
Swatch Colorant Mode            : CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK
Swatch Colorant Type            : PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS
Swatch Colorant Cyan            : 0.000000, 0.000000, 0.000000, 0.000000, 100.000000, 100.000000, 100.000000, 0.000000, 15.000000, 0.000000, 0.000000, 0.000000, 0.000000, 5.000000, 20.000000, 50.000000, 75.000000, 85.000000, 90.000000, 75.000000, 80.000000, 70.000000, 85.000000, 100.000000, 100.000000, 75.000000, 50.000000, 35.000000, 10.000000, 0.000000, 25.000000, 40.000000, 50.000000, 55.000000, 25.000000, 30.000000, 35.000000, 40.000000, 40.000000, 50.000000, 92.971700, 92.971700, 54.924798, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 85.000000, 100.000000, 60.000000
Swatch Colorant Magenta         : 0.000000, 0.000000, 100.000000, 0.000000, 0.000000, 0.000000, 100.000000, 100.000000, 100.000000, 90.000000, 80.000000, 50.000000, 35.000000, 0.000000, 0.000000, 0.000000, 0.000000, 10.000000, 30.000000, 0.000000, 10.000000, 15.000000, 50.000000, 95.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 95.000000, 25.000000, 45.000000, 50.000000, 60.000000, 40.000000, 50.000000, 60.000000, 65.000000, 70.000000, 70.000000, 87.972802, 87.972802, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 100.000000, 75.000000, 10.000000, 10.000000, 90.000000, 90.000000
Swatch Colorant Yellow          : 0.000000, 0.000000, 100.000000, 100.000000, 100.000000, 0.000000, 0.000000, 0.000000, 90.000000, 85.000000, 95.000000, 100.000000, 85.000000, 90.000000, 100.000000, 100.000000, 100.000000, 100.000000, 95.000000, 75.000000, 45.000000, 0.000000, 0.000000, 5.000000, 25.000000, 0.000000, 0.000000, 35.000000, 50.000000, 20.000000, 40.000000, 50.000000, 60.000000, 65.000000, 65.000000, 75.000000, 80.000000, 90.000000, 100.000000, 80.000000, 89.019603, 89.019603, 17.715700, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 100.000000, 100.000000, 95.000000, 100.000000, 0.000000, 0.003100
Swatch Colorant Black           : 0.000000, 100.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 10.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 10.000000, 30.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 25.000000, 0.000000, 0.000000, 10.000000, 0.000000, 0.000000, 0.000000, 5.000000, 25.000000, 40.000000, 0.000000, 10.000000, 25.000000, 35.000000, 50.000000, 70.000000, 79.998499, 79.998499, 0.000000, 0.000000, 100.000000, 89.999400, 79.998800, 69.999700, 59.999100, 50.000000, 39.999400, 29.998800, 19.999700, 9.999100, 4.998800, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.003100
Swatch Colorant Tint            : 100.000000, 100.000000, 100.000000, 100.000000
Format                          : application/pdf
Title                           : 閼昏鲸鏋冭箛顐︹偓鐔稿瘹閸?M5_V1.4-F.02.02185-161013
Creator                         : Administrator
Page Count                      : 4
Author                          : Administrator

EXIF Metadata provided by EXIF.tools