AnyDATA Korea ADU-510D CDMA 1x/EVDO USB Modem User Manual 1

Download:
Mirror Download [FCC.gov]
Document ID	1097865
Application ID	SWQyksLIChuW9R5tofOfvw==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	108.63kB (1357879 bits)
Date Submitted	2009-04-16 00:00:00
Date Available	2009-04-16 00:00:00
Creation Date	2009-04-09 16:41:49
Producing Software	Acrobat Distiller 7.0 (Windows)
Document Lastmod	2009-04-09 16:41:49
Document Title	Untitled1
Document Creator	PScript5.dll Version 5.2
Document Author:	UKL inc

인쇄 단추
전자 메일로 제출
ADU-510
(User Manual)
SW-ADU-510-UG-V1.0E(IUSACELL)
January 18. 2008
AnyDATA.NET USB Modem (User
Manual)
AnyDATA
CDMA
Module
Copyright © 2000-2007 AnyDATA.N
Series
Reference
Design
ET Inc. All Rights Reserved.
Specification
Any part of this document may not be distributed, communicated, reproduced or transmitted in any form
or by any means, electronic or mechanical or otherwise, for any purpose, without the permission
of
AnyDATA Corp.
This document can be subjected to revision without further notice
FCC Warning: RF Exposure to Radio Frequency Radiation
The radiated output power of this device is below the FCC radio frequency exposure limits. Nevertheless,
the device should be used in such a manner that the potential for human contact during normal operation
is minimized. In order to avoid the possibility of exceeding the FCC radio frequency exposure limts, the
gain of the external antenna must not exceed 1dBi. This device is compliant with the parameters of
Specific Absorption Rate (SAR) government regulations.
Contact Address
AnyDATA.NET Inc.(Korea)
DaeGo Bldg, 8 th., 1591-10
Kwanyang-dong, Dongan_gu,
Anyang City, Kyunggi-do Korea.
http://www.anydata.co.kr
e-mail: infodata@anydata.net
Rep:+82-31-380-7100
Fax:+82-31-476-6021
AnyTime AnyPlace AnyWireless Data Solutions™
2/65
AnyDATA.NET USB Modem (User
Manual)
Contents
1. ADU-510 Features .....................................................................................................................................
2. LED Indicators ...........................................................................................................................................
2.1 POWER ...............................................................................................................................................
2.2 IDLE / BUSY ........................................................................................................................................
3. Program Installation ..................................................................................................................................
3.1 Introduction ..........................................................................................................................................
3.2 Minimum System Requirement ............................................................................................................
6 3.2.1 PC Hardware .................................................................................................................................
3.2.2 Operating System .........................................................................................................................
3.36 USB Driver Installation and Uninstall (Windows 2000) ........................................................................
7 3.3.1 USB Driver Installation (Automatic) ..............................................................................................
7.3.2 USB Driver Installation (Manual) .................................................................................................
3.3.3 USB Driver Uninstall ...................................................................................................................
10
3.418USB Driver Installation and Uninstall (Windows XP) .........................................................................
203.4.1 USB Driver Installation (Automatic) ............................................................................................
3.4.2 USB Driver Installation (Manual) .................................................................................................
20
3.4.3
23 USB Driver Uninstall ...................................................................................................................
3.529USB Driver Installation and Uninstall (Windows Vista) ......................................................................
313.5.1 USB Driver Installation (Automatic) ............................................................................................
3.5.2 USB Driver Installation (Manual) .................................................................................................
31
3.5.3 USB Driver Uninstall ...................................................................................................................
34
3.641Installing Easy Wireless Net Software ...........................................................................................
43
4. Using Easy Wireless Net Program ..........................................................................................................
47
4.1 Exiting the program ............................................................................................................................
47
4.2 Screen Display of Easy Wireless Net ................................................................................................
484.2.1 Executed Screen .........................................................................................................................
4.2.2 Descriptions of each icon ............................................................................................................
48
4.2.3 Descriptions for each button .......................................................................................................
49
4.2.4
50 Setting Environment ....................................................................................................................
4.2.5 Connecting to the Internet ...........................................................................................................
51
4.2.6 Disconnecting to the Internet ......................................................................................................
55
4.2.7 Sending and Receiving SMS ......................................................................................................
55
56 4.2.7.1 Writing New Message .................................................................................................................... 57
4.2.7.2 Viewing sent message ................................................................................................................... 59
4.2.7.3 Viewing received or saved message .............................................................................................. 60
4.2.8 Phonebook ..................................................................................................................................
61
5. Troubleshooting .......................................................................................................................................
62
6. Quick Guide .............................................................................................................................................
65
6.1 Display Indicators ..............................................................................................................................
65
AnyTime AnyPlace AnyWireless Data Solutions™
3/65
AnyDATA.NET USB Modem (User
Manual)
1. ADU-510 Features
LED
Ear Jack
USB
AnyTime AnyPlace AnyWireless Data Solutions™
4/65
AnyDATA.NET USB Modem (User
Manual)
2. LED Indicators
2.1 POWER
Mode
Descriptions
RED
Modem power on state
OFF
Modem power off state
2.2 IDLE / BUSY
Mode
Descriptions
GREEN
Success to network acquisition (Idle state)
BLUE
Data(Voice) call is connected
BLUE BLINK
Incoming voice call and not connected yet
OFF
No service or Searching the network
AnyTime AnyPlace AnyWireless Data Solutions™
5/65
AnyDATA.NET USB Modem (User
Manual)
3. Program Installation
3.1 Introduction
This section describes step-by-step method to install ANYDATA.NET USB MODEM and Easy Wireless
Net Software.
Note : Must install the software before connecting ANYDATA.NET USB MODEM to PC/Notebook.
3.2 Minimum System Requirement
3.2.1 PC Hardware
Recommend to use PC/Notebook at speed of 300 MHz or higher.
Minimum 233 MHz speed required, * Intel Pentium/Celeron products,
AMD K6/Athlon/Duron products or compatible processors
Recommend
to
use
128MB
RAM
or
higher
Minimum
64MB
of
memory
must
be
used,
but in this case the performance will be degraded and certain features will be limited.
At least 100 MB of free hard disk space is required.
Motherboard
or
PCI
card
that
supports
USB.
Video adaptor with Super VGA (800 x 600) or higher resolution and Monitor
CD-ROM or DVD Optical Drive
Keyboard and Mouse
3.2.2 Operating System
Windows XP Home or Professional ( with Service Pack 2 )
Windows 2000 (with Service Pack 4 for optimal performances)
Windows Vista
< Recommended parameters >
Windows Update : Keep your computer up to date
AnyTime AnyPlace AnyWireless Data Solutions™
6/65
AnyDATA.NET USB Modem (User
Manual)
3.3 USB Driver Installation and Uninstall (Windows 2000)
3.3.1 USB Driver Installation (Automatic)
1. The installation of the USB Wireless Modem Connect should run automatically upon selecting this
option on the menu of the Installation CD. Click  on the menu.
AnyTime AnyPlace AnyWireless Data Solutions™
7/65
AnyDATA.NET USB Modem (User
Manual)
2. The computer needs to restart after the driver installation completed.
AnyTime AnyPlace AnyWireless Data Solutions™
8/65
AnyDATA.NET USB Modem (User
Manual)
3. Connect the modem and PC`s USB port, and check if the driver is installed properly in
. See the followings to the location of 
[Start ▶ Control Panel ▶ System ▶ Hardware Tab ▶ Device Manager]
As shown in below with red boxed that shows  and
, the driver has been successfully installed.
AnyTime AnyPlace AnyWireless Data Solutions™
9/65
AnyDATA.NET USB Modem (User
Manual)
3.3.2 USB Driver Installation (Manual)
1. Connect the modem and PC`s USB port with supplied USB cable.
※ The manual driver installation shall be required twice.
2. Installing  window will appear.
Select .
3. Press
button to move to next step.
AnyTime AnyPlace AnyWireless Data Solutions™
10/65
AnyDATA.NET USB Modem (User
Manual)
4. A window that displays a proper path of Driver will appear.
Select  and press
button.
5. Select from the CD`s path  folder for appropriate OS.
AnyTime AnyPlace AnyWireless Data Solutions™
11/65
AnyDATA.NET USB Modem (User
Manual)
6. A window that searches  will appear.
7. Press
button to move to next step.
8. Process of installing .
AnyTime AnyPlace AnyWireless Data Solutions™
12/65
AnyDATA.NET USB Modem (User
Manual)
9. If the installation of  has been completed, following window
will
appear.
AnyTime AnyPlace AnyWireless Data Solutions™
13/65
AnyDATA.NET USB Modem (User
Manual)
10. Next, it will install .
11. Select < Search for a suitable driver for my device (recommended)
>.
12. Press
button to move to next step.
AnyTime AnyPlace AnyWireless Data Solutions™
14/65
AnyDATA.NET USB Modem (User
Manual)
13. A window that displays a proper path of Driver will appear.
Select  and press
button.
14. Select from the CD`s path  folder for appropriate OS.
15. Press
button to move to next step.
16. Window that searches  will
appear.
AnyTime AnyPlace AnyWireless Data Solutions™
15/65
AnyDATA.NET USB Modem (User
Manual)
17. Press
button to move to next step.
This will complete the driver installation.
AnyTime AnyPlace AnyWireless Data Solutions™
16/65
AnyDATA.NET USB Modem (User
Manual)
18. Connect the modem and PC`s USB port, and check if the driver is installed properly in
. See the followings to the location of 
[Start ▶ Control Panel ▶ System ▶ Hardware Tab ▶ Device Manager]
As shown in below with red boxed that shows  and
, the driver has been successfully installed.
AnyTime AnyPlace AnyWireless Data Solutions™
17/65
AnyDATA.NET USB Modem (User
Manual)
3.3.3 USB Driver Uninstall
1. Disconnect the modem from USB port before uninstalling the driver.
2. By clicking on
under the driver folder in CD, this will start as shown below.
3. Select  to uninstall the driver.
To stop removing the driver, select .
AnyTime AnyPlace AnyWireless Data Solutions™
18/65
AnyDATA.NET USB Modem (User
Manual)
4. As shown below, click  then the driver will be uninstalled.
5. The computer must restart after the driver is uninstalled.
AnyTime AnyPlace AnyWireless Data Solutions™
19/65
AnyDATA.NET USB Modem (User
Manual)
3.4 USB Driver Installation and Uninstall (Windows XP)
3.4.1 USB Driver Installation (Automatic)
1. The installation of the USB Wireless Modem Connect should run automatically upon selecting this
option on the menu of the Installation CD. Click  on the menu.
AnyTime AnyPlace AnyWireless Data Solutions™
20/65
AnyDATA.NET USB Modem (User
Manual)
2. The computer needs to restart after the driver installation completed.
To restart the computer later, select .
AnyTime AnyPlace AnyWireless Data Solutions™
21/65
AnyDATA.NET USB Modem (User
Manual)
3. Connect the modem and PC`s USB port, and check if the driver is installed properly in
. See the followings to the location of 
[Start ▶ Control Panel ▶ System ▶ Hardware Tab ▶ Device Manager]
As shown in below with red boxed that shows  and
, the driver has been successfully installed.
AnyTime AnyPlace AnyWireless Data Solutions™
22/65
AnyDATA.NET USB Modem (User
Manual)
3.4.2 USB Driver Installation (Manual)
1. Connect the modem and PC`s USB port with supplied USB cable.
※ The manual driver installation shall be required twice.
2. Installing  window will appear.
Select .
3. Press
button to proceed.
4. A window that displays a proper path of Driver will
appear.
5. Select from the CD`s path  folder for appropriate
OS.
6. Press
button to proceed.
AnyTime AnyPlace AnyWireless Data Solutions™
23/65
AnyDATA.NET USB Modem (User
Manual)
7. A window that searches  will appear.
8. Process of installing .
AnyTime AnyPlace AnyWireless Data Solutions™
24/65
AnyDATA.NET USB Modem (User
Manual)
9. If the installation of  has been completed,
following window will appear.
10. Next, it will install .
11. Select .
AnyTime AnyPlace AnyWireless Data Solutions™
25/65
AnyDATA.NET USB Modem (User
Manual)
12. Press
13.
Select
button to proceed.
the
proper
path
from
the
CD
window
will
appear.
14. Select from the CD`s path  folder for appropriate
OS.
15. Press
button to move to next step.
AnyTime AnyPlace AnyWireless Data Solutions™
26/65
AnyDATA.NET USB Modem (User
Manual)
16. Window that searches  will appear.
17. If the installation has done properly, this window will appear.
This will complete the driver installation.
AnyTime AnyPlace AnyWireless Data Solutions™
27/65
AnyDATA.NET USB Modem (User
Manual)
22. Connect the modem and PC`s USB port, and check if the driver is installed properly in
. See the followings to the location of 
[Start ▶ Control Panel ▶ System ▶ Hardware Tab ▶ Device Manager]
As shown in below with red boxed that shows  and
, the driver has been successfully installed.
AnyTime AnyPlace AnyWireless Data Solutions™
28/65
AnyDATA.NET USB Modem (User
Manual)
3.4.3 USB Driver Uninstall
1. Disconnect the modem from USB port before uninstalling the driver.
2. By clicking on
under the driver folder in CD, this will start as shown below.
3. Select  to uninstall the driver.
To stop removing the driver, select .
AnyTime AnyPlace AnyWireless Data Solutions™
29/65
AnyDATA.NET USB Modem (User
Manual)
4. As shown below, click  then the driver will be uninstalled.
5. The computer must restart after the driver is
uninstalled.
AnyTime AnyPlace AnyWireless Data Solutions™
30/65
AnyDATA.NET USB Modem (User
Manual)
3.5 USB Driver Installation and Uninstall (Windows Vista)
※ The same will apply to Windows Vista 64bit.
3.5.1 USB Driver Installation (Automatic)
1. The installation of the USB Wireless Modem Connect should run automatically upon selecting this
option on the menu of the Installation CD. Click  on the menu.
AnyTime AnyPlace AnyWireless Data Solutions™
31/65
AnyDATA.NET USB Modem (User
Manual)
2. The computer needs to restart after the driver installation completed.
To restart the computer later, select .
AnyTime AnyPlace AnyWireless Data Solutions™
32/65
AnyDATA.NET USB Modem (User
Manual)
3. Connect the modem and PC`s USB port, and check if the driver is installed properly in
. See the followings to the location of 
[Start
▶ Control Panel ▶ System and Maintenance ▶Device Manager]
As shown in below with red boxed that shows  and
, the driver has been successfully installed.
AnyTime AnyPlace AnyWireless Data Solutions™
33/65
AnyDATA.NET USB Modem (User
Manual)
3.5.2 USB Driver Installation (Manual)
1. Connect the USB Modem to the computer.
※ The manual driver installation shall be required twice.
2. Click  when shown in below.
ㅁ a
3. Click  when  is shown.
4. Click  as shown below.
AnyTime AnyPlace AnyWireless Data Solutions™
34/65
AnyDATA.NET USB Modem (User
Manual)
5 Click .
6. Click  and click  as shown below.
AnyTime AnyPlace AnyWireless Data Solutions™
35/65
AnyDATA.NET USB Modem (User
Manual)
7.  will be shown as below.
8. Click  if driver will be installed successfully as shown below.
※ After the Windows shown above, the driver installation is required one more time.
AnyTime AnyPlace AnyWireless Data Solutions™
36/65
AnyDATA.NET USB Modem (User
Manual)
9.
Click  when shown below.
10. Click  when  is shown.
11. Click 
AnyTime AnyPlace AnyWireless Data Solutions™
37/65
AnyDATA.NET USB Modem (User
Manual)
12 Click .
13. Click  and click  as shown below.
AnyTime AnyPlace AnyWireless Data Solutions™
38/65
AnyDATA.NET USB Modem (User
Manual)
14.  will be shown as below.
15. Click  when the driver will be installed successfully as shown below.
AnyTime AnyPlace AnyWireless Data Solutions™
39/65
AnyDATA.NET USB Modem (User
Manual)
16. Connect the modem and PC`s USB port, and check if the driver is installed properly in
. See the followings to the location of 
[Start
▶ Control Panel ▶ System and Maintenance ▶Device Manager]
As shown in below with red boxed that shows  and
, the driver has been successfully installed.
AnyTime AnyPlace AnyWireless Data Solutions™
40/65
AnyDATA.NET USB Modem (User
Manual)
3.5.3 USB Driver Uninstall
1. Disconnect the modem from USB port before uninstalling the driver.
2. By clicking on
under the driver folder in CD, this will start as shown below.
3. Select  to uninstall the driver.
To stop removing the driver, select .
AnyTime AnyPlace AnyWireless Data Solutions™
41/65
AnyDATA.NET USB Modem (User
Manual)
4. As shown below, click  then the driver will be uninstalled.
5. The computer must restart after the driver is
uninstalled.
AnyTime AnyPlace AnyWireless Data Solutions™
42/65
AnyDATA.NET USB Modem (User
Manual)
3.6 Installing Easy Wireless Net Software
1. Double click  from the supplied CD.
2. Select the desire language as shown below.
3. Press
button to proceed. By pressing
button, the installation of Easy
Wireless Net Program will stop.
4. Welcoming message for using Easy Wireless Net Program window will appear.
5. Press
button to proceed.
6. Next window is related to License Agreement. Please read carefully.
AnyTime AnyPlace AnyWireless Data Solutions™
43/65
AnyDATA.NET USB Modem (User
Manual)
7. Press  button to advance to the next step.
8. Next window displays asking proper path for installing the program.
Default path is 
AnyTime AnyPlace AnyWireless Data Solutions™
44/65
AnyDATA.NET USB Modem (User
Manual)
9. Press
button to install the program.
10. When program has been successfully installed, following window will display.
AnyTime AnyPlace AnyWireless Data Solutions™
45/65
AnyDATA.NET USB Modem (User
Manual)
11. Press
button for ending the program installation.
This is install the Easy Wireless Net Program.
 If modem is not connected to PC/Notebook and device driver is not installed, then the program will not
launch even after completion of installation program
AnyTime AnyPlace AnyWireless Data Solutions™
46/65
AnyDATA.NET USB Modem (User
Manual)
4. Using Easy Wireless Net Program
4.1 Exiting the program
From the Easy Wireless Net program, by pressing
button will quit the program.
Note:
If DUN is running or SMS is transferring, the program will end after the completion of these commands.
AnyTime AnyPlace AnyWireless Data Solutions™
47/65
AnyDATA.NET USB Modem (User
Manual)
4.2 Screen Display of Easy Wireless Net
4.2.1 Executed Screen
End & Minimize
Information
SMS, Phone
Book,
Configuration
Connect EVDO
Action Window
AnyTime AnyPlace AnyWireless Data Solutions™
48/65
AnyDATA.NET USB Modem (User
Manual)
4.2.2 Descriptions of each icon
Display
Function
RSSI Signal Strength Indicator
Calling Possible
Calling not Possible
New message arrived.
Voice Mail arrived.
Voice Mail and New Message arrived.
Supports Hybrid mode
Only 1X mode available
Only EVDO mode available
USB connected
Roaming
Connected to the Modem
Either the cable is disconnected to the modem
or improper port connection.
Internet connected
Internet disconnected
AnyTime AnyPlace AnyWireless Data Solutions™
49/65
AnyDATA.NET USB Modem (User
Manual)
4.2.3 Descriptions for each button
Display
Function
connected to the Internet button.
Disconnecting to the Internet
Setup Easy Wireless Net
SMS menu
Phonebook Menu
AnyTime AnyPlace AnyWireless Data Solutions™
50/65
AnyDATA.NET USB Modem (User
Manual)
4.2.4 Setting Environment
There are 4 options and please refer to below for explanations.
[ About ] Tab
Display the version for Easy Wireless Net program.
AnyTime AnyPlace AnyWireless Data Solutions™
51/65
AnyDATA.NET USB Modem (User
Manual)
[ Basic ] Tab
The
basic
configuration
for
connect
to
the
network
using
EVDO
modem.
All values are set automatically, however if wants to change the value then check
appropriate
box/boxes in the left and press
button to take effect.
UserName:
Password:
ServiceNum: Internet Connect Dial Number
AnyTime AnyPlace AnyWireless Data Solutions™
52/65
AnyDATA.NET USB Modem (User
Manual)
[ Advance] Tab
This part is to change the important parameter for EVDO modem.
If wants to change the value then check appropriate
box/boxes in the left and press
button to take effect.
Pref Mode:
Select a mode among <1x only>,  and <1x + EVDO>
AnyTime AnyPlace AnyWireless Data Solutions™
53/65
AnyDATA.NET USB Modem (User
Manual)
[ User] Tab
If wants to change the value then check appropriate
button to take effect.
box/boxes in the left and press
Always On Top:
The program window will be always top if  is selected.
Battery Warning Sound:
Disable : Do not use battery warning feature.
AnyTime AnyPlace AnyWireless Data Solutions™
54/65
AnyDATA.NET USB Modem (User
Manual)
4.2.5 Connecting to the Internet
Must set proper UserName, Password, and ServiceNum in the above settings.
Then press
button, it will automatically connected to the Internet.
If the modem is trying to connect or connected to the Internet, this
above. If it cannot connect to the Internet, then
icon will appear as shown
icon will appear.
4.2.6 Disconnecting to the Internet
When user is ready to disconnect from the Internet, press
button to end the connection.
Please check the following if abrupt disconnection of modem occurred:
1) Did I intentionally disconnect USB modem?
2)
Are
cables
properly
connected?
3) Did I intentionally change Port number in environment settings?
4) Did I quit/exit the program?
AnyTime AnyPlace AnyWireless Data Solutions™
55/65
AnyDATA.NET USB Modem (User
Manual)
4.2.7 Sending and Receiving SMS
Press
button.
As
seen
in
above,
there
will
be
three
buttons
(new message, sent message, and received message from the left).
Pressing each button will transfer to appropriate screen.
AnyTime AnyPlace AnyWireless Data Solutions™
56/65
AnyDATA.NET USB Modem (User
Manual)
4.2.7.1 Writing New Message
1) By pressing  icon, the new window will appear for inserting the message.
2) Write the message in the window then press
button to move to the next step.
Note:
By pressing special characters that is highlighted, that character will be written on the message
window.
3) Input a phone number/numbers for sending SMS. It is possible to add upto 5 numbers.
By pressing a Phonebook (
button), a separate window will appear to select phone
numbers.
AnyTime AnyPlace AnyWireless Data Solutions™
57/65
AnyDATA.NET USB Modem (User
Manual)
4) After inserting phone numbers, press
5) After selecting the number, press
button to move to the next step.
button to send the message.
Sending Message has failed.
AnyTime AnyPlace AnyWireless Data Solutions™
58/65
AnyDATA.NET USB Modem (User
Manual)
4.2.7.2 Viewing sent message
1) By pressing  icon, you will see a screen as below.
2) All sent messages will be shown.
3) Select the message then press
button to delete this message.
4) Select the message then press
button to display all the contents in the window.
5) By pressing
button, the selected message will be ready to send to a new number.
Message read.
Unread message.
Sent message.
Note:Description of icons.
AnyTime AnyPlace AnyWireless Data Solutions™
59/65
AnyDATA.NET USB Modem (User
Manual)
4.2.7.3 Viewing received or saved message
1) By pressing  icon, you will see a screen as below.
2)
All
received
messages
will
be
shown.
3) It will indicate whether the message was read or not.
4) Select the message then press
button to delete this message.
5) Select the message then press
By pressing
button to view the whole contents in the display.
button, the selected message will be ready to send to a new number.
Message read.
Unread message.
Sent message.
Note: Description of icons.
AnyTime AnyPlace AnyWireless Data Solutions™
60/65
AnyDATA.NET USB Modem (User
Manual)
4.2.8 Phonebook
This is a feature to store phone numbers that uses often into RUIM and to make calls accordingly.
By pressing Phonebook
button, following window will appear.
[1/100] Maximum number of Phone numbers can be stored and currently saved phone numbers.
Start searching.
All: Find and display any characters that matches from the Phone Number into a Phone
Number List
Index:
Finds
phone
number
based
on
the
index.
Name: Finds all names that contain any one of the letter to be searched.
Phone: Finds all numbers that contains any one of the number to be searched.
Sends SMS message to the selected phone number.
Deletes selected number.
Saves
Phone
Number
into
the
recorded
Index
number.
If the same Index number already exists then requires editing of the contents.
AnyTime AnyPlace AnyWireless Data Solutions™
61/65
AnyDATA.NET USB Modem (User
Manual)
5. Troubleshooting
Q:
cannot
connect
to
the
Internet?
A: Please check  of program for correct ID, password and Service number. For
proper ID, password and Service number, please contact service provider for more information.
Q:
The
Internet
connection
speed
is
too
slow.
A: Please check whether the modem is set at 1X mode. If USB modem is set at 1X mode, then the
Internet is not connected as EVDO mode. EVDO icon must be appeared in the display to assure that
it has been connected as an EVDO mode.
Q:
The
Internet
connection
is
poor
and
frequently
it
gets
disconnected.
A: The CDMA frequency is at unstable state. Try to move to a different place then use it again. Also, if
you touch or block the USB modem with hand/body contact, the modem connection speed degrades.
Please be careful not to touch the modem with your hand or any part of the body.
Q: All of the display on the program`s screen shows as prohibited icons.
A: Please check whether the port is properly set for communicating between computer and the modem
in the  category.
Q: After the installation of the program, the program does not run and displays
following message
A: This means that USB modem and the compute are not connected properly. Please double check
whether USB modem is connected properly to the computer.
AnyTime AnyPlace AnyWireless Data Solutions™
62/65
AnyDATA.NET USB Modem (User
Manual)
Q: During the running of the program, following message appears and the program halts.
A: The actual connection of USB modem and computer has been disconnected. Please check whether
the cable is dismounted, cable is disconnected or USB modem power has been turned off. Then try to
reconnect the modem.
Q: Cannot make a call
A: If you see a [EVDO] icon in the display, call cannot be made. Please change mode other
than
[EVDO] mode then try to make a call. There are three different icons in that field, [1X], [1X/EVDO] and
[EVDO].
Q: How many people can I send SMS messages at once?
A: It is possible to send maximum of 5 people at once.
Q: The program has ended but the USB modem power is turned off.
A: The power of USB modem is not controlled by the program. The point USB modem turns
on
automatically is when USB cable is connected to the PC/Notebook. In order to turn off the modem,
press ON/OFF button for at least 5 seconds.
Q: Easy Wireless Net program displays  message and terminates.
A: Easy Wireless Net program uses mdb format type of database file. This type of format is preinstalled
when using Windows XP, Windows 2000 OS in a computer. However, this type of database file has
been removed by some other program.
Need to update following two (2) files from Microsoft site:
1. MDAC : < http://www.microsoft.com/downloads/details.aspx?FamilyID=6c050fe3-c795-4b7db037-185d0506396c&DisplayLang=en>
2. Jet Engine 4.0:

AnyTime AnyPlace AnyWireless Data Solutions™
63/65
AnyDATA.NET USB Modem (User
Manual)
Q: After click internet button, following message appears and do not connect internet.
A: There may be something wrong with your audio device. Please check whether your audio device
driver has been installed.
AnyTime AnyPlace AnyWireless Data Solutions™
64/65
AnyDATA.NET USB Modem (User
Manual)
6. Quick Guide
6.1 Display Indicators
The display may show the following icons to indicate the USB modem`s status or function.
Display
Function
RSSI Signal Strength Indicator
Calling Possible
Calling not Possible
New message arrived.
Voice Mail arrived.
Voice Mail and New Message arrived.
Supports Hybrid mode
Only 1X mode available
Only EVDO mode available
USB connected
Roaming
Connected to the Modem
Either the cable is disconnected to the modem or improper port connection.
Internet connected
Internet disconnected
connected to the Internet button.
Disconnecting to the Internet
Setup Easy Wireless Net
SMS menu
Phonebook Menu
Sending message.
AnyTime AnyPlace AnyWireless Data Solutions™
65/65

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0 (Windows)
Create Date                     : 2009:04:09 16:41:49-07:00
Creator Tool                    : PScript5.dll Version 5.2
Modify Date                     : 2009:04:09 16:41:49-07:00
Format                          : application/pdf
Title                           : Untitled1
Creator                         : UKL inc
Document ID                     : uuid:35fa114e-f1ec-40d7-bd83-d63225482876
Instance ID                     : uuid:74e33992-d8c4-47b6-a17e-26513ea30d02
Page Count                      : 65
Author                          : UKL inc