AnyDATA EMIV CDMA External Data Modem User Manual 01 EMIVDual 1 X1

AnyDATA Corporation CDMA External Data Modem 01 EMIVDual 1 X1

Users Manual

EMIV-DUAL V1.0 AnyDATA.NET Proprietary – Use Subject to Restrictions EMIV-DUAL User Manual Application Information 01-EMIVDUAL-1_X1 June 29, 2004 AnyDATA.NET Inc. Hanvit Bank B/D 6F Byulyang-dong Kwachon KOREA Tel) 82-2-504-3360 Fax) 82-2-504-3362
Interface Description EMIV-DUAL Reference Manual Application Information EMIV-DUAL V1.0 AnyDATA.NET Proprietary – Use Subject to Restrictions AnyDATA.NET Inc. Hanvit Bank B/D 6F Byulyang-dong Kwachon KOREA Copyright ⓒ 2001 AnyDATA.NET Inc.. All rights reserved. Printed in the Republic Of KOREA. All data and information contained in or disclosed by this document are confidential and proprietary information of AnyDATA.NET Inc., and all rights therein are expressly reserved. By accepting this material, the recipient agrees that this material and the information contained therein are held in confidence and in trust and will not be used, copied, reproduced in whole or in part, nor its contents revealed in any manner to others without the express written permission of AnyDATA.NET Inc.. AnyDATA.NET Proprietary: Restricted Distribution. This document contains critical information about AnyDATA.NET products and may not be distributed to anyone without permission of AnyDATA.NET Inc. All data and information contained in this document are proprietary and confidential information of AnyDATA.NET Inc. No part of this document may be reproduced, in any form or any means without written permission of AnyDATA.NET Inc. Although the information in this document has been carefully reviewed and its believed to be reliable. AnyDATA.NET Inc. does not assume any liability arising out of the application or use of any product described herein, Neither does it convey any license under its patent rights nor rights of others. Send Technical Questions to : johnkim@anydata.net EMIV-DUAL Reference Manual Application Information 01-EMIVDUAL-1_X1 June 29, 2004
Interface Description EMIV-DUAL Reference Manual Application Information EMIV-DUAL V1.0 AnyDATA.NET Proprietary – Use Subject to Restrictions Introduction The EMIV-DUAL is designed for the test and simulation of the CDMA wireless data communications. User can connect the EMIV-DUAL to your PC or Notebook and easily test the wireless communications. User can use this to develop your applications software even before user’s own hardware is ready. It also can be used as a debugging during user’s hardware test. Disclaimer and Limitation of Liability AnyDATA.NET Inc. assumes no responsibility for any damage or loss resulting from the misuse of its products. AnyDATA.NET Inc. assumes no responsibility for any loss or claims by third parties, which may arise through the use of its products. AnyDATA.NET Inc. assumes no responsibility for any damage or loss caused by the deletion or loss of data as a result of malfunctions or repairs. The information disclosed herein is the exclusive property of AnyDATA.NET Inc. and no part of this publication may be reproduced or transmitted in any form or by any means including electronic storage, reproduction, execution or transmission without the prior written consent of AnyDATA.NET Inc. The information contained in this document is subject to change without notice. Reproduction, adaptation or translation of this document is prohibited without prior written permission of AnyDATA.NET Inc.
Interface Description EMIV-DUAL Reference Manual Application Information EMIV-DUAL V1.0 AnyDATA.NET Proprietary – Use Subject to Restrictions FCC RF Exposure Information Warning! Read this information before using this device. In August 1996 the Federal Communications Commission (FCC) of the United States with its action in Report and Order FCC 96-326 adopted an updated safety standard for human exposure to radio frequency electromagnetic energy emitted by FCC regulated transmitters. Those guidelines are consistent with the safety standard previously set by both U.S. and international standards bodies. The design of this device complies with the FCC guidelines and these international standards. CAUTION  Operating Requirements The user can not make any changes or modifications not expressly approved by the party responsible for compliance, otherwise it could void the user's authority to operate the equipment. To satisfy FCC RF exposure compliance requirements for a mobile transmitting device, this device and its antenna should generally maintain a separation distance of 20cm or more from a person’s body. Antenna Gain must not exceed 1dBi Special accessories In order to ensure this device in compliance with FCC regulation, the special accessories are provided with this device and must be used with the device only. The user is not allowed to use any other accessories than the special accessories given with this device
Interface Description EMIV-DUAL Reference Manual Application Information EMIV-DUAL V1.0 AnyDATA.NET Proprietary – Use Subject to Restrictions Contents 1 Introduction 1.1 Purpose 1.2 Organization 1.3 Revision History 2 Overview 2.1 Application Description 2.2 Technical Specifications 2.2.1 General Specification 2.2.2 Receive Specification 2.2.3 Transmit Specification 2.2.4 gpsOne Receiver Specification 2.2.5 Standards 2.3 Interface Diagram 2.4 EMIV-DUAL General Features 2.5 Internal Modem Features 3 PIN Description 3.1 8-Pin Connector (RS232 Standard) 3.2 3-Pin Connector (Debugging) 3.3 DC Power Connector
Interface Description EMIV-DUAL Reference Manual Application Information EMIV-DUAL V1.0 AnyDATA.NET Proprietary – Use Subject to Restrictions 4 Interface Descriptions 4.1 Overview 4.2 RS232 Interface (Standard) 5 Electrical Specifications 5.1 Absolute Maximum Ratings 5.2 Recommended Operating Conditions 5.3 Power Consumption 5.4 Serial Interface Electrical Specifications 6 Mechanical Dimension 6.1 EMIV-DUAL Outline 7 FCC Notice 8 Installation Example
Interface Description EMIV-DUAL Reference Manual Application Information EMIV-DUAL V1.0 AnyDATA.NET Proprietary – Use Subject to Restrictions 1. Introduction 1.1 Purpose This Manual provides hardware interface and programming information for EMIV-DUAL CDMA Wireless Data Modem. 1.2 Organization The interface and operation section is organized into the following subsections:  Section 2 – Introduces users to the EMIV-DUAL CDMA Wireless Data Modem basic features and general specifications.  Section 3 – Contains EMIV-DUAL Pin description - DC12V Input Port, 8pin Serial Port and Debugging Port.  Section 4 – Describes the UART Interface.  Section 5 – Specifies the recommended operating conditions, DC voltage characteristics, I/O timing, and power estimations for the modem.  Section 6 – Provides package dimensions and outlook features for the modem.  Section 7 – Describes the FCC Notice. 1.3 Revision History The revision history for this document is shown in Table 1-1. Table 1-1 Revision History Version Date Description X1 June 2004 Initial Release
Interface Description EMIV-DUAL Reference Manual Application Information EMIV-DUAL V1.0 AnyDATA.NET Proprietary – Use Subject to Restrictions 2. Overview 2.1 Application Descriptions The CDMA Wireless Data Modem is a complex consumer communications instrument that relies heavily on both digital signal and embedded processor technologies. The Wireless Data Modem manufactured by AnyDATA.NET supports Code-Division-Multiple-Access (CDMA). This operates in 800MHz CDMA and 1900MHz PCS spectrum. In a continuing effort to simplify the design and to reduce the production cost of the Wireless Data Modem, AnyDATA.NET has successfully developed the EMIV-DUAL. The EMIV-DUAL is AnyDATA.NET’s latest compact Wireless Data Modem operating in 800MHz CDMA and 1900MHz PCS spectrum, also contains complete digital modulation and demodulation system for CDMA standards as specified in IS-95 A/B and IS-2000. The subsystem within the EMIV-DUAL includes a CDMA processor (MSM6050), an integrated CODEC with an ear piece and microphone amplifiers, and an RS-232 serial interface supporting forward link data communications of a rate of 153kbps. The EMIV-DUAL provides external interface. External interface includes the standard RS-232, Digital Audio, External reset control, parallel LCD Display, Keypad, Ringer extension ports and R-UIM for China market. The EMIII-DUAL has the capability to power down unused circuits in order to dynamically minimize power consumption.
Interface Description EMIV-DUAL Reference Manual Application Information EMIV-DUAL V1.0 AnyDATA.NET Proprietary – Use Subject to Restrictions 2.2 Technical Specifications 2.2.1 General Specifications PARAMETERS DESCRIPTIONS External Access Code-Division-Multiple-Access (CDMA) CDMA Protocol IS-95 A/B, IS-126, IS-637A, IS-707A, IS-2000 Data Rate 153.6Kbps Transmit/Receive Frequency Interval 45MHz for Cellular and 80MHz for PCS Band Width 1.23MHz Operating Voltage DC 7V ~ 16V Current Consumption Sleep mode : 30mA, Idle mode (70mA) , Traffic mode : 350mA (Max) at 12V Operating Temperature -30℃ ~ +60℃ Frequency Stability ±300Hz for 800MHz CDMA and ±150Hz for 1900MHz CDMA Antenna Magnet mount helical antenna, 50ohm, 1dBi Gain for 800MHz and 1900MHz, -4dBi for 1575MHz Size 60 X 112 X 29mm Weight About 110g External Interface RS-232, Analog audio, Power, Antenna, Debug port
Interface Description EMIV-DUAL Reference Manual Application Information EMIV-DUAL V1.0 AnyDATA.NET Proprietary – Use Subject to Restrictions 2.2.2 Receive Specifications PARAMETERS DESCRIPTIONS Frequency Range 869.04 ~ 893.97 MHz for 800MHz CDMA and 1931.25 ~ 1988.75MHz for 1900MHz CDMA Sensitivity Below –104dBm Interference Rejection Single tone (-30dBm @900KHz): Below –101dBm for 800MHz Single tone (-30dBm @1250KHz): Below –101dBm for 1900MHz Spurious Wave Suppression Below –80dBc Input Dynamic Range -25dBm ~ -104dBm 2.2.3 Transmit Specifications PARAMETERS DESCRIPTIONS Frequency Range 824.04 ~ 848.97 MHz for 800MHz CDMA and 1851.25 ~ 1908.75MHz for 1900MHz CDMA Nominal Max. Power 0.32 W (24.7dBm) Peak Power in Operation Mode 0.35W (25.5dBm) Minimum Controlled Output Power Below –50dBm Max Power Spurious 900KHz: Below –42dBc/30KHz 1.98MHz: Below –54dBc/30KHz 1250KHz : Below –42dBc/30KHz 1.98MHz: Below –50dBc/30KHz 2.2.4 gpsOne Receiver Specifications Parameters Descriptions Frequency Range L1, 1575.42MHz C/A Code 1.023MHz Chip Rate Receiver Sensitivity -152dBm
Interface Description EMIV-DUAL Reference Manual Application Information EMIV-DUAL V1.0 AnyDATA.NET Proprietary – Use Subject to Restrictions 2.2.5 Standards IS-95A/B/C : Protocol Between MS & BTS IS-96A : Voice Signal Coding IS-98A : Base MS Function IS-126 : Voice Loop-Back IS-637 : Short Message Service IS-707 : Data Service Built-in TCP/IP : AnyDATA proprietary software IS-657 : packet data
Interface Description EMIV-DUAL Reference Manual Application Information EMIV-DUAL V1.0 AnyDATA.NET Proprietary – Use Subject to Restrictions 2.3 Interface Diagram Figure 2-1 Interface Block Diagram
Interface Description EMIV-DUAL Reference Manual Application Information EMIV-DUAL V1.0 AnyDATA.NET Proprietary – Use Subject to Restrictions 2.4 EMIV-DUAL General Features Figure 2-2 EMIV-DUAL General Features 2.5 Internal Modem Features Figure 2-3 Internal Modem General Features (DTG2000-DUAL)
Interface Description EMIV-DUAL Reference Manual Application Information EMIV-DUAL V1.0 AnyDATA.NET Proprietary – Use Subject to Restrictions 3. PIN Description 3.1 8-Pin Male Modular Jacks (RS232 Standard) Molex (85503) RS-232(PC) Pin 1 Pin 2 Pin 3 Pin 4 Pin 5 Pin 6 Pin 7 Pin 8 RI GND DTR CTS TX RTS RX DCD Figure 3-1 Right Angle Modular Jacks Pin Description (85503,Molex 8P) 3.2 3-Pin Connector (Debugging) GND TXD RXD Figure 3-2 Debugging Connector (5268,Molex 3P) 3.3 DC Power Connector DC 12V-+ Figure 3-3 DC 12V Power Connector (5268, Molex 2P)
Interface Description EMIV-DUAL Reference Manual Application Information EMIV-DUAL V1.0 AnyDATA.NET Proprietary – Use Subject to Restrictions 4. Interface Descriptions 4.1 Overview This chapter covers information required to design the EMIV-DUAL into a subscriber unit application. In addition, the internal signals that are necessary for complete understanding of the UART interfaces are described below. 4.2 RS232 Interface (Standard) The Universal Asynchronous Receiver Transmitter (UART) communicates with serial data that conforms the RS-232 Interface protocol. The modem provides 5.0V CMOS level. All the control signals of the RS-232 signals are active low, but data signals of RXD, and TXD Are active high. The UART has a 64byte transmit (TX) FIFO and a 64byte receive (RX) FIFO. The UART Features hardware handshaking, programmable data sizes, programmable stop bits, and odd, even, no parity. The UART operates at a 115.2kbps maximum bit rate. NAME DESCRIPTION CHARACTERISTIC DP_DCD/ Data Carrier Detect Network connected from the modem DP_RI/ Ring Indicator Output to host indicating coming call DP_RTS/ Request to Send Ready for receive from host DP_TXD Transmit Data Output data from the modem DP_DTR/ Data Terminal Ready Host ready signal DP_RXD Receive Data Input data to the modem DP_CTS/ Clear to Send Modem output signal GND Signal Ground Signal ground Figure 4-1 UART Interface Pinouts
Interface Description EMIV-DUAL Reference Manual Application Information EMIV-DUAL V1.0 AnyDATA.NET Proprietary – Use Subject to Restrictions 5. Electrical Specifications 5.1 Absolute Maximum Ratings Operating the modem under conditions that exceed those listed in the Absolute Maximum. The Ratings table may result in damage to the modem. Absolute Maximum Ratings may be considered as limiting values, and are considered individually. While all other parameters are within their specified operating ranges, the functional operation of the modem under any of the conditions in the Absolute Maximum Ratings table is not implied. Table 5-1 Absolute Maximum Ratings PARAMETER MIN MAX UNITS Storage Temperature -40 +80 ºC Voltage On Any Input - +20 V Voltage On Any Output +10 V Supply Voltage - +20 V Initializing Current 100 mA Drop No damages after 60-Inch drop over concrete floor 5.2 Recommended Operating Conditions PARAMETER MIN MAX UNITS Supply Voltage +7 +16 V Operating Temperature -30 +60 ºC Operating Humidity 95%(50ºC) Relative Humidity 5.3 Power Consumption STANDBY Conversation Idle Sleep 350mA (MAX) 70mA 30mA 5.4 Serial Interface Electrical Specifications PARAMETER MIN MAX UNITS Input High Voltage +2 +15 V Input Low Voltage -15 -2 V Output High Voltage +5 +7 V Output Low Voltage -7 -5 V
Interface Description EMIV-DUAL Reference Manual Application Information EMIV-DUAL V1.0 AnyDATA.NET Proprietary – Use Subject to Restrictions 6. Mechanical Dimensions 6.1 EMIV-DUAL Outline
Interface Description EMIV-DUAL Reference Manual Application Information EMIV-DUAL V1.0 AnyDATA.NET Proprietary – Use Subject to Restrictions 7. FCC Notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15, Part22 and Part24 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:  Reorient or relocate the receiving antenna.  Increase the separation between the equipment and receiver.  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  Consult the dealer or an experienced radio/TV technician for help.
Interface Description EMIV-DUAL Reference Manual Application Information EMIV-DUAL V1.0 AnyDATA.NET Proprietary – Use Subject to Restrictions 8. Installation Example

Navigation menu