Aoc 23 I2367Fh Users Manual
Aoc-I2267Fw-Owner-S-Manual aoc-i2267fw-owner-s-manual
Aoc-I2367F-Owner-S-Manual aoc-i2367f-owner-s-manual
Aoc-I2367Fh-Owner-S-Manual aoc-i2367fh-owner-s-manual
AOC 23 I2367FH AOC I2367FH LCD Manual
I2367FH to the manual a0c3507c-2941-4f06-8d04-55c551b856cc
2015-02-02
: Aoc Aoc-23-I2367Fh-Users-Manual-393112 aoc-23-i2367fh-users-manual-393112 aoc pdf
Open the PDF directly: View PDF 
.
Page Count: 66
| Download | |
| Open PDF In Browser | View PDF |
LCD Monitor User Manual I2367F /I2267F WH / I2367F/ I2267FW /I2067F LED Backlight Safety........................................................................................................................................................................ 3 National Conventions ......................................................................................................................................... 3 Power ................................................................................................................................................................ 4 Installation.......................................................................................................................................................... 5 Cleaning............................................................................................................................................................. 6 Other .................................................................................................................................................................. 7 Setup ........................................................................................................................................................................ 8 Contents in Box ................................................................................................................................................. 8 Setup Stand & Base .......................................................................................................................................... 9 Adjusting Viewing Angle................................................................................................................................... 11 Connecting the Monitor .................................................................................................................................... 12 Adjusting ................................................................................................................................................................ . 14 Setting Optimal Resolution .............................................................................................................................. 14 Windows Vista .......................................................................................................................................... 14 Windows XP ............................................................................................................................................. 16 Windows ME/2000 .................................................................................................................................... 17 Hotkeys ............................................................................................................................................................ 18 OSD Setting ..................................................................................................................................................... 19 Luminance ................................................................................................................................................ 20 Image Setup ............................................................................................................................................. 22 Color Setup............................................................................................................................................... 24 Picture Boost ............................................................................................................................................ 26 OSD Setup ............................................................................................................................................... 28 Extra ......................................................................................................................................................... 30 Exit............................................................................................................................................................ 32 LED Indicator ................................................................................................................................................... 33 Driver ...................................................................................................................................................................... 34 Monitor Driver .................................................................................................................................................. 34 Windows 7 ................................................................................................................................................ 34 Windows Vista .......................................................................................................................................... 37 Windows XP ............................................................................................................................................. 39 Windows 2000 .......................................................................................................................................... 42 Windows ME ............................................................................................................................................. 42 i-Menu .............................................................................................................................................................. 43 e-Saver ............................................................................................................................................................ 44 Screen+ ........................................................................................................................................................... 45 Troubleshoot ........................................................................................................................................................... 46 Specification............................................................................................................................................................ 47 General Specification ....................................................................................................................................... 47 Preset Display Modes ...................................................................................................................................... 50 Pin Assignments .............................................................................................................................................. 51 Plug and Play................................................................................................................................................... 52 Regulation ............................................................................................................................................................... 53 FCC Notice ...................................................................................................................................................... 53 CE Declaration of Conformity ...........................................................................................................................53 WEEE Declaration ........................................................................................................................................... 54 Service .................................................................................................................................................................... 56 Warranty Statement for Europe ....................................................................................................................... 56 Warranty Statement for North & South America (excluding Brazil) ........................................................... 58 2 Safety National Conventions The following subsections describe notational conventions used in this document. Notes, Cautions, and Warnings Throughout this guide, blocks of text may be accompanied by an icon and printed in bold type or in italic type. These blocks are notes, cautions, and warnings, and they are used as follows: NOTE: A NOTE indicates important information that helps you make better use of your computer system. CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. WARNING: A WARNING indicates the potential for bodily harm and tells you how to avoid the problem. Some warnings may appear in alternate formats and may be unaccompanied by an icon. In such cases, the specific presentation of the warning is mandated by regulatory authority. 3 Power The monitor should be operated only from the type of power source indicated on the label. If you are not sure of the type of power supplied to your home, consult your dealer or local power company. The monitor is equipped with a three-pronged grounded plug, a plug with a third (grounding) pin. This plug will fit only into a grounded power outlet as a safety feature. If your outlet does not accommodate the three-wire plug, have an electrician install the correct outlet, or use an adapter to ground the appliance safely. Do not defeat the safety purpose of the grounded plug. Unplug the unit during a lightning storm or when it will not be used for long periods of time. This will protect the monitor from damage due to power surges. Do not overload power strips and extension cords. Overloading can result in fire or electric shock. To ensure satisfactory operation, use the monitor only with UL listed computers which have appropriate configured receptacles marked between 100 - 240V ~, Min. 5A The wall socket shall be installed near the equipment and shall be easily accessible. For use only with the attached power adapter (Output 12Vdc) which have UL,CSA listed license (Only for monitors with power adapter). Manufacturers: I2367FH /I2267F WH 1) TPV ELECTRONICS(FUJIAN) CO., LTD model : ADPC1245 2) HONOR ELECTRONIC CO.,LTD model: ADS-65LSI-12-1 12045G I2367F/I2267FW /I2067F 1) TPV ELECTRONICS(FUJIAN) CO., LTD model : ADPC1236 2) HONOR ELECTRONIC CO., LTD model : ADS-45NP-12-1 12036G 4 Installation Do not place the monitor on an unstable cart, stand, tripod, bracket, or table. If the monitor falls, it can injure a person and cause serious damage to this product. Use only a cart, stand, tripod, bracket, or table recommended by the manufacturer or sold with this product. Follow the manufacturer’s instructions when installing the product and use mounting accessories recommended by the manufacturer. A product and cart combination should be moved with care. Never push any object into the slot on the monitor cabinet. It could damage circuit parts causing a fire or electric shock. Never spill liquids on the monitor. Do not place the front of the product on the floor. If you mount the monitor on a wall or shelf, use a mounting kit approved by the manufacturer and follow the kit instructions. Leave some space around the monitor as shown below. Otherwise, air-circulation may be inadequate hence overheating may cause a fire or damage to the monitor. See below the recommended ventilation areas around the monitor when the monitor is installed on the stand: 5 Cleaning Clean the cabinet regularly with cloth. You can use soft-detergent to wipe out the stain, instead of strong-detergent which will cauterize the product cabinet. When cleaning, make sure no detergent is leaked into the product. The cleaning cloth should not be too rough as it will scratch the screen surface. Please disconnect the power cord before cleaning the product. 6 Other If the product is emitting a strange smell, sound or smoke, disconnect the power plug IMMEDIATELY and contact a Service Center. Make sure that the ventilating openings are not blocked by a table or curtain. Do not engage the LCD monitor in severe vibration or high impact conditions during operation. Do not knock or drop the monitor during operation or transportation. 7 Setup Contents in Box Monitor * Base CD Manual Adapter * * Power Cable Analog Cable DVI Cable Audio Cable * HDMI Cable Not all signal cables (Analog, and HDMI cables) will be provided for all countries and regions. Please check with the local dealer or AOC branch office for confirmation. 8 Setup Stand & Base Please setup or remove the base following the steps as below. Setup: 2 1 Remove: 9 Unit standing without base is available. (Caution: must put unit in flat surface. Any uneven or sloped surface may result unit damaged or injury to user.) 10 Adjusting Viewing Angle For optimal viewing it is recommended to look at the full face of the monitor, then adjust the monitor's angle to your own preference. Hold the stand so you will not topple the monitor when you change the monitor's angle. You are able to adjust the monitor's angle from -5° to 23 °. -5 23 NOTE: Do not touch the LCD screen when you change the angle. It may cause damage or break the LCD screen. 11 Connecting the Monitor Cable Connections In Back of Monitor and Computer: 1 2 3 4 1. Power 2. Earphone 3. Audio 4. D-Sub 5. HDMI 5 To protect equipment, always turn off the PC and LCD monitor before connecting. 1 Connect the power cable to the AC port on the back of the monitor. 2 Connect one end of the 15-pin D-Sub/HDMI cable to the back of the monitor and connect the other end to the computer's D-Sub/HDMI port. 3 Turn on your monitor and computer. If your monitor displays an image, installation is complete. If it does not display an image, please refer Troubleshooting. 12 Connecting the Monitor Cable Connections In Back of Monitor and Computer: 1 1. Power 2. D-Sub 3. DVI 2 3 To protect equipment, always turn off the PC and LCD monitor before connecting. 1 Connect the power cable to the AC port on the back of the monitor. 2 Connect one end of the 15-pin D-Sub/DVI cable to the back of the monitor and connect the other end to the computer's D-Sub/DVI port. 3 Turn on your monitor and computer. If your monitor displays an image, installation is complete. If it does not display an image, please refer Troubleshooting. 13 Adjusting Setting Optimal Resolution Windows Vista For Windows Vista: 1 Click START. 2 Click CONTROL PANEL. 3 Click Appearance and Personalization. 4 Click Personalization 14 5 Click Display Settings. 6 Set the resolution SLIDE-BAR to Optimal preset. resolution . 15 Windows XP For Windows XP: 1 Click START. 2 Click SETTINGS. 3 Click CONTROL PANEL. 4 Click Appearance and Themes. 5 Double click DISPLAY. 16 6 Click SETTINGS. 7 Set the resolution SLIDE-BAR to Optimal preset resolution Windows ME/2000 For Windows ME/2000: 1 Click START. 2 Click SETTINGS. 3 Click CONTROL PANEL. 4 Double click DISPLAY. 5 Click SETTINGS. 6 Set the resolution SLIDE-BAR to Optimal preset resolution . 17 Hotkeys 1 2 3 4 5 1 Menu/Enter 1 Menu/Enter 2 Volume/∧ 2 4:3 or wide /∧ 3 Eco (DCR) /∨ 3 Eco (DCR) /∨ 4 Source/Auto/Exit 4 Source/Auto/Exit 5 Power 5 Power Power Press the Power button to turn on/off the monitor. Eco (DCR) ∨ Press the Eco key continuously to select the Eco mode of brightness and DCR on when there is no OSD. (Eco mode hot key may not be available in all models). 9ROXPH∧ When there is no OSD, press Volume adjust volume. 4:3 or wide image ratio / ∧ When there is no OSD, press ∧ hotkey continuously to change 4:3 or wide image ratio. (If the product screen size is 4:3 or input signal resolution is wide format, the hot key is disable to adjust. ) Auto / Exit / Source hot key When there is no OSD, press Auto/Source button continuously about 2 second to do auto configure. When the OSD is closed, press Source button will be Source hot key function. Press Source button continuously to select the input source showed in the message bar, press Menu/Enter button to change to the source selected. 18 OSD Setting Basic and simple instruction on the control keys. 1) Press the MENU-button to activate the OSD window. 2) Press ∧or∨ to navigate through the functions. Once the desired function is highlighted, press the MENU-button to activate it . press∧ or ∨ to navigate through the sub-menu functions. Once the desired function is highlighted, press MENU-button to activate it. 3) Press∧ or ∨ to change the settings of the selected function. Press AUTO to exit. If you want to adjust any other function, repeat steps 2-3. 4) OSD Lock Function: To lock the OSD, press and hold the MENU button while the monitor is off and then press power button to turn the monitor on. To un-lock the OSD - press and hold the MENU button while the monitor is off and then press power button to turn the monitor on. Notes: 1) If the product has only one signal input, the item of "Input Select" is disable to adjust. 2) If the product screen size is 4:3 or input signal resolution is wide format, the item of "Image Ratio" is disable to adjust. 3) One of non-standard ECO, DCR , DCB, Picture Boost is activated , the other three of functions are turned off accordingly. 4) C e rta in m o d e ls m a y n o t h a ve th e O ve rd riv e o p tio n . P le a s e re fe r to th e a ctu a l O S D o f th e d isp la y. 19 Luminance 1. Press MENU (Menu) to display menu. 2. Press ∧or ∨ to select (Luminance), and press MENU to enter. 3. Press ∧or∨ to select submenu, and press MENU to enter. 20 4. Press ∧or ∨ to adjust. 5. Press AUTO to exit. Brightness 0-100 Backlight Adjustment Contrast 0-100 Contrast from Digital-register. Standard Standard Mode Text Text Mode Internet Internet Mode Game Game Mode Movie Movie Mode Sports Sports Mode Gamma1 Adjust to Gamma1 Gamma2 Adjust to Gamma 2 Gamma3 Adjust to Gamma 3 Off Disable dynamic contrast ratio On Enable dynamic contrast ratio Eco mode Gamma DCR Weak Overdrive Medium Adjust the response time S t rong O ff 21 Image Setup 1. Press MENU (Menu) to display menu. 2. Press ∧ or ∨ to select (Image Setup), and press MENU to enter. 3. Press ∧ or∨ to select submenu, and press MENU to enter. 22 4. Press ∧or ∨ to adjust. 5. Press AUTO to exit. Clock 0-100 Adjust picture Clock to reduce Vertical-Line noise. Phase 0-100 Adjust Picture Phase to reduce Horizontal-Line noise Sharpness 0-100 Adjust picture sharpness H.Position 0-100 Adjust the horizontal position of the picture. V.Position 0-100 Adjust the vertical position of the picture. 23 Color Setup 1. Press MENU (Menu) to display menu. 2. Press ∧ or∨ to select (Color Setup), and press MENU to enter. 3. Press ∧ or ∨ to select submenu, and press MENU to enter. 24 4. Press ∧ or ∨ to adjust. 5. Press AUTO to exit. Color setup. Warm Recall Warm Color Temperature from EEPROM. Normal Recall Normal Color Temperature from EEPROM. Cool Recall Cool Color Temperature from EEPROM. sRGB Recall SRGB Color Temperature from EEPROM. Red Red Gain from Digital-register Green Green Gain Digital-register. Blue Blue Gain from Digital-register Full Enhance on or off Disable or Enable Full Enhance Mode Nature Skin on or off Disable or Enable Nature Skin Mode Green Field on or off Disable or Enable Green Field Mode Sky-blue on or off Disable or Enable Sky-blue Mode AutoDetect on or off Disable or Enable AutoDetect Mode On or off Disable or Enable Demo User DCB Mode DCB Demo 25 Picture Boost 1. Press MENU (Menu) to display menu. 2. Press ∧ or∨ to select (Picture Boost), and press MENU to enter. 3. Press ∧ or ∨ to select submenu, and press MENU to enter. 26 4. Press ∧ or ∨ to adjust. 5. Press AUTO to exit. Frame Size 14-100 Adjust Frame Size Brightness 0-100 Adjust Frame Brightness Contrast 0-100 Adjust Frame Contrast H. position 0-100 Adjust Frame horizontal Position V.position 0-100 Adjust Frame vertical Position Bright Frame on or off Disable or Enable Bright Frame 27 OSD Setup 1. Press MENU (Menu) to display menu. 2. Press ∧ or∨ to select (OSD Setup), and press MENU to enter. 3. Press ∧ or∨ to select submenu, and press MENU to enter. 28 4. Press ∧ or ∨ to adjust. 5. Press AUTO to exit. H.Position 0-100 Adjust the horizontal position of OSD V.Position 0-100 Adjust the vertical position of OSD Timeout 5-120 Adjust the OSD Timeout Transparence 0-100 Adjust the transparence of OSD Language Select the OSD language 29 Extra 1. Press MENU (Menu) to display menu. 2. Press ∧ or ∨ to select (Extra), and press MENU to enter. 3. Press ∧or ∨ to select submenu, and press MENU to enter. 30 4. Press ∧or ∨ to adjust. 5. Press AUTO to exit. I2367FH /I2267FWH Auto Select to Auto Detect input signal D-SUB Select D-SUB Signal Source as Input HDMI 1 Select HDMI 1 Source as Input HDMI 2 Select HDMI 2 Source as Input Auto Config yes or no Auto adjust the picture to default Image Ratio wide or 4:3 Select wide or 4:3 format for display DDC-CI yes or no Turn ON/OFF DDC-CI Support Reset yes or no Reset the menu to default Off Timer 0~24hours Select timing to turn off the monitor. Show the information of the main image and sub-image source Auto Select to Auto Detect input signal D-SUB Select D-SUB Signal Source as Input Input Select Information I2367F/I2267FW /I2067F Input Select Select DVI Source as Input Auto Config yes or no Auto adjust the picture to default Image Ratio wide or 4:3 Select wide or 4:3 format for display DDC-CI yes or no Turn ON/OFF DDC-CI Support Reset yes or no Reset the menu to default Off Timer 0~24hours Select timing to turn off the monitor. Show the information of the main image and sub-image source Information 31 Exit 1. Press MENU (Menu) to display menu. 2. Press ∧ or ∨ to select 3. Press AUTO to exit. (Exit), and press MENU to enter. Exit Exit the main OSD 32 LED Indicator Status LED Color Full Power Mode Blue Active-off Mode orange 33 Driver Monitor Driver Windows 7 1.Start Windows® 7 2.Click on the 'Start' button and then click on 'Control Panel'. 3. Click on the 'Display' icon. 34 4.Ckick on the “Change display settings” button. 5.Click the “Advanced Settings” button. 6.Click the “Monitor” tab and then click the “Properties” button. 35 7.Click the “Driver” tab. 8. Open the "Update Driver Software-Generic PnP Monitor" window by clicking on “Update Driver... “and then click the "Browse my computer for driver software" button. 9. Select "Let me pick from a list of device drivers on my computer". 36 10. Click the “Have Disk” button. Click on the “Browse” button and navigate to the following directory: X:\Driver\module name (where X is the drive letter designator for the CD-ROM drive). 11. Select the "xxx.inf" file and click the “Open” button. Click the “OK” button. 12. Select your monitor model and click the “Next” button. The files will be copied from the CD to your hard disk drive. 13. Close all open windows and remove the CD. 14. Restart the system. The system will automatically select the maximum refresh rate and corresponding Color Matching Profiles. 37 Windows Vista 1. Click "Start " and "Control Panel". Then, double-click on "Appearance and Personalization". 2. Click "Personalization" and then "Display Settings". 3. Click "Advanced Settings...". 38 4. Click "Properties" in the "Monitor" tab. If the "Properties" button is deactivated, it means the configuration for your monitor is completed. The monitor can be used as is. If the message "Windows needs..." is displayed, as shown in the figure below, click "Continue". 5. Click "Update Driver..." in the "Driver" tab. 6. Check the "Browse my computer for driver software" checkbox and click "Let me pick from a list of device drivers on my computer". 7. Click on the 'Have disk...' button, then click on the 'Browse...' button and then select the appropriate drive F:\Driver (CD-ROM Drive). 8. Select your monitor model and click on the 'Next' button. 9. Click "Close" → "Close" → "OK" → "OK" on the following screens displayed in sequence. 39 Windows XP 1. Start Windows® XP 2. Click on the 'Start' button and then click on 'Control Panel'. 3. Select and click on the category ‘Appearance and Themes’ 4. Click on the 'Display' Item. 40 5. Select the 'Settings' tab then click on the 'Advanced' button. 6. Select 'Monitor' tab - If the 'Properties' button is inactive, it means your monitor is properly configured. Please stop installation. - If the 'Properties' button is active, click on 'Properties' button. Please follow the steps below. 7. Click on the 'Driver' tab and then click on 'Update Driver...' button. 41 8. Select the 'Install from a list or specific location [advanced]' radio button and then click on the 'Next' button. 9. Select the 'Don't Search. I will choose the driver to install' radio button. Then click on the 'Next' button. 10. Click on the 'Have disk...' button, then click on the 'Browse...' button and then select the appropriate drive F: (CD-ROM Drive). 11. Click on the 'Open' button, then click the 'OK' button. 12. Select your monitor model and click on the 'Next' button. - If you can see the 'has not passed Windows® Logo testing to verify its compatibility with Windows® XP' message, please click on the 'Continue Anyway' button. 13. Click on the 'Finish' button then the 'Close' button. 14. Click on the 'OK' button and then the 'OK' button again to close the Display Properties dialog box. 42 Windows 2000 1. Start Windows® 2000 2. Click on the 'Start' button, point to 'Settings', and then click on 'Control Panel'. 3. Double click on the 'Display' Icon. 4. Select the 'Settings' tab then click on 'Advanced...'. 5. Select 'Monitor' - If the 'Properties' button is inactive, it means your monitor is properly configured. Please stop installation. - If the 'Properties' button is active. Click on 'Properties' button. Please follow the steps given below. 6. Click on 'Driver' and then click on 'Update Driver...' then click on the 'Next' button. 7. Select 'Display a list of the known drivers for this device so that I can choose a specific driver', then click on 'Next' and then click on 'Have disk...'. 8. Click on the 'Browse...' button then select the appropriate drive F: ( CD-ROM Drive). 9. Click on the 'Open' button, then click on the 'OK' button. 10. Select your monitor model and click on the 'Next' button. 11. Click on the 'Finish' button then the 'Close' button. If you can see the 'Digital Signature Not Found' window, click on the 'Yes' button. Windows ME 1. Start Windows® Me 2. Click on the 'Start' button, point to 'Settings', and then click on 'Control Panel'. 3. Double click on the 'Display' Icon. 4. Select the 'Settings' tab then click on 'Advanced...'. 5. Select the 'Monitor' button, then click on 'Change...' button. 6. Select 'Specify the location of the driver(Advanced)' and click on the 'Next' button. 7. Select 'Display a list of all the drivers in a specific location, so you can choose the driver you want', then click on 'Next' and then click on 'Have Disk...'. 8. Click on the 'Browse...' button, select the appropriate drive F: ( CD-ROM Drive) then click on the 'OK' button. 9. Click on the 'OK' button, select your monitor model and click on the 'Next' button. 10. Click on 'Finish' button then the 'Close' button. 43 i-Menu Welcome to “i-Menu” software by AOC. i-Menu makes it easy to adjust your monitor display setting by using on screen menus instead of the OSD button on the monitor. To complete installation, please follow the installation guide. 44 e-Saver Welcome to use AOC e-Saver monitor power management software! The AOC e-Saver features Smart Shutdown functions for your monitors, allows your monitor to timely shutdown when PC unit is at any status (On, Off, Sleep or Screen Saver); the actual shutdown time depends on your preferences (see example below). Please click on "driver/e-Saver/setup.exe" to start installing the e-Saver software, follow the install wizard to complete software installation. Under each of the four PC status, you may choose from the pull-down menu the desired time (in minutes) for your monitor to automatically shutdown. The example above illustrated: 1) The monitor will never shutdown when the PC is powered on. 2) The monitor will automatically shutdown 5 minutes after the PC is powered off. 3) The monitor will automatically shutdown 10 minutes after the PC is in sleep/stand-by mode. 4) The monitor will automatically shutdown 20 minutes after the screen saver appears. You can click “RESET” to set the e-Saver to its default settings like below. 45 Screen+ Welcome to "Screen+" software by AOC, Screen+ software is a desktop screen splitting tool, it splits the desktop into different panes, each pane displays a different window. You only need to drag the window to a corresponding pane, when you want to access it. It supports multiple monitor display to make your task easier. Please follow the installation software to install it. 46 Troubleshoot Problem & Question Possible Solutions Power LED Is Not ON Make sure the power button is ON and the Power Cord is properly connected to a grounded power outlet and to the monitor. No images on the screen Is the power cord connected properly? Check the power cord connection and power supply. Is the cable connected correctly? (Connected using the D-sub cable) Check the DB-15 cable connection. (Connected using the DVI cable) Check the DVI cable connection. * DVI input is not available on every model. If the power is on, reboot the computer to see the initial screen (the login screen), which can be seen. If the initial screen (the login screen) appears, boot the computer in the applicable mode (the safe mode for Windows ME/XP/2000) and then change the frequency of the video card. (Refer to the Setting the Optimal Resolution) If the initial screen (the login screen) does not appear, contact the Service Center or your dealer. Can you see "Input Not Supported" on the screen? You can see this message when the signal from the video card exceeds the maximum resolution and frequency that the monitor can handle properly. Adjust the maximum resolution and frequency that the monitor can handle properly. Make sure the AOC Monitor Drivers are installed. Picture Is Fuzzy & Has Ghosting Shadowing Problem Picture Bounces, Flickers Or Wave Pattern Appears In The Picture Monitor Is Stuck In Active Off-Mode" Adjust the Contrast and Brightness Controls. Press to auto adjust. Make sure you are not using an extension cable or switch box. We recommend plugging the monitor directly to the video card output connector on the back . Move electrical devices that may cause electrical interference as far away from the monitor as possible. Use the maximum refresh rate your monitor is capable of at the resolution your are using. The Computer Power Switch should be in the ON position. The Computer Video Card should be snugly fitted in its slot. Make sure the monitor's video cable is properly connected to the computer. Inspect the monitor's video cable and make sure no pin is bent. Make sure your computer is operational by hitting the CAPS LOCK key on the keyboard while observing the CAPS LOCK LED. The LED should either turn ON or OFF after hitting the CAPS LOCK key. Missing one of the primary colors (RED, GREEN, or BLUE) Inspect the monitor's video cable and make sure that no pin is damaged. Make sure the monitor's video cable is properly connected to the computer. Screen image is not centered or sized properly Adjust H-Position and V-Position or press hot-key (AUTO). Picture has color defects (white does not look white) Adjust RGB color or select desired color temperature. Horizontal or vertical disturbances on the screen Use Windows 95/98/2000/ME/XP shut-down mode Adjust CLOCK and FOCUS. Press to auto-adjust. 47 Specification General Specification I2367FH Panel Model name I2367FH Driving system TFT Color LCD Viewable Image Size 584.2mm Diagonal Pixel pitch 0.0884*RGB( H )mm x 0.2652(V)mm Video R, G, B Analog lnterface ,HDMI Separate Sync. H/V TTL Display Color 16.7M Colors Dot Clock 148.5MHz Horizontal scan range 30kHz to 83kHz Horizontal scan Size(Maximum) 509.18mm Resolution Vertical scan range 50Hz to 76Hz Vertical scan Size(Maximum) 286.42mm Optimal preset resolution 1920×1080@60Hz Plug & Play VESA DDC2B/C1 Input Connector VGA,HDMI×2 Input Video Signal Analog: 0.7Vp-p(standard), 75 OHM, Positive 、HDMI Power Source 100-240V~, 50/60Hz Power Consumption Active<40W(Typical) Standby < 0.5 W Off timer 0-24 hrs Connector Type VGA、HDMI×2 Signal Cable Type Detachable Dimensions & Weight: Physical Height (with base) 394mm Characteristics Width 531.4mm Depth 120.6mm Weight (monitor only) 3.75kg Environmental Temperature: 48 Operating 0° to 40° Non-Operating -25°to 55° Humidity: Operating 10% to 85% (non-condensing) Non-Operating 5% to 93% (non-condensing) Altitude: Operating 0~ 2000m (0~ 6562 ft ) Non-Operating 0~ 51 12192m (0~ 40000 ft ) 49 I2267FWH Panel Model number I2267FWH Driving system TFT Color LCD Viewable Image Size 546.2 mm diagoanl Pixel pitch 0.08265*RGB (H)mm x 0.24795(V)mm Video R, G, B Analog lnterface, HDMI Separate Sync. H/V TTL Display Color 16.7M Colors Dot Clock 148.5 MHz Horizontal scan range 30 kHz - 83 kHz Horizontal scan Size(Maximum) 476.06 mm Resolution Vertical scan range 55 Hz - 75 Hz Vertical scan Size(Maximum) 267.79 mm Optimal preset resolution 1920 x1080@ 60 Hz Plug & Play VESA DDC2B/CI Input Connector VGA,HDMI x2 Input Video Signal Analog: 0.7Vp-p(standard), 75 OHM, Positive ,HDMI Power Source 100~240VAC, 50/60Hz Power Consumption Physical Characteristics Active < 40 W Standby < 0.5W Off timer 0-24 hrs Connector Type VGA,HDMI x2 Signal Cable Type Detachable Dimensions & Weight: Height (with base) 375.6mm Width 498.3mm Depth 120.6mm Weight (monitor only) 3.48 kg Temperature: Environmental Operating 0° to 40° Non-Operating -25°to 55° Humidity: Operating 10% to 85% (non-condensing) Non-Operating 5% to 93% (non-condensing) Altitude: Operating 0~ 2000m (0~ 6562 ft ) Non-Operating 0~ 12192m (0~ 40000 ft ) 50 I2367F Panel Model number I2367F Driving system TFT Color LCD Viewable Image Size 584.2 mm diagoanl Pixel pitch 0.0884*RGB (H)mm x 0.2652(V)mm Video R, G, B Analog lnterface, DVI Separate Sync. H/V TTL Display Color 16.7M Colors Dot Clock 148.5 MHz Horizontal scan range 30 kHz - 83 kHz Horizontal scan Size(Maximum) 509.18 mm Resolution Vertical scan range 55 Hz - 75 Hz Vertical scan Size(Maximum) 286.42 mm Optimal preset resolution 1920 x1080@ 60 Hz Plug & Play VESA DDC2B/CI Input Connector VGA,DVI Input Video Signal Analog: 0.7Vp-p(standard), 75 OHM, Positive ,DVI Power Source 100~240VAC, 50/60Hz Power Consumption Physical Characteristics Active < 30 W Standby < 0.5W Off timer 0-24 hrs Connector Type VGA,DVI Signal Cable Type Detachable Dimensions & Weight: Height (with base) 394mm Width 531.4mm Depth 120.6mm Weight (monitor only) 3.75 kg Temperature: Environmental Operating 0° to 40° Non-Operating -25°to 55° Humidity: Operating 10% to 85% (non-condensing) Non-Operating 5% to 93% (non-condensing) Altitude: Operating 0~ 5000m (0~ 16404 ft ) Non-Operating 0~ 12192m (0~ 40000 ft ) 51 I2267Fw Panel Model number I2267Fw Driving system TFT Color LCD Viewable Image Size 546.2 mm diagoanl Pixel pitch 0.08265*RGB (H)mm x 0.24795(V)mm Video R, G, B Analog lnterface, DVI Separate Sync. H/V TTL Display Color 16.7M Colors Dot Clock 148.5 MHz Horizontal scan range 30 kHz - 83 kHz Horizontal scan Size(Maximum) 476.06 mm Resolution Vertical scan range 55 Hz - 75 Hz Vertical scan Size(Maximum) 267.79 mm Optimal preset resolution 1920 x1080 @ 60 Hz Plug & Play VESA DDC2B/CI Input Connector VGA,DVI Input Video Signal Analog: 0.7Vp-p(standard), 75 OHM, Positive ,DVI Power Source 100~240VAC, 50/60Hz Power Consumption Physical Characteristics Active < 30 W Standby < 0.5W Off timer 0-24 hrs Connector Type VGA,DVI Signal Cable Type Detachable Dimensions & Weight: Height (with base) 375.6mm Width 498.3mm Depth 120.6mm Weight (monitor only) 3.48 kg Temperature: Environmental Operating 0° to 40° Non-Operating -25°to 55° Humidity: Operating 10% to 85% (non-condensing) Non-Operating 5% to 93% (non-condensing) Altitude: Operating 0~ 5000m (0~ 16404 ft ) Non-Operating 0~ 12192m (0~ 40000 ft ) 52 I2067F Panel Model number I2067F Driving system TFT Color LCD Viewable Image Size 508.05 mm diagoanl Pixel pitch 0.09225*RGB (H)mm x 0.27675(V)mm Video R, G, B Analog lnterface, DVI Separate Sync. H/V TTL Display Color 16.7M Colors Dot Clock 140 MHz Horizontal scan range 30 kHz - 83 kHz Horizontal scan Size(Maximum) 442.8 mm Resolution Vertical scan range 55 Hz - 75 Hz Vertical scan Size(Maximum) 249.075 mm Optimal preset resolution 1600 x 900@60Hz Plug & Play VESA DDC2B/CI Input Connector VGA,DVI Input Video Signal Analog: 0.7Vp-p(standard), 75 OHM, Positive ,DVI Power Source 100~240VAC, 50/60Hz Power Consumption Physical Characteristics Active < 23 W Standby < 0.5W Off timer 0-24 hrs Connector Type VGA,DVI Signal Cable Type Detachable Dimensions & Weight: Height (with base) 357.5mm Width 464.8mm Depth 120.6mm Weight (monitor only) 3.18 kg Temperature: Environmental Operating 0° to 40° Non-Operating -25°to 55° Humidity: Operating 10% to 85% (non-condensing) Non-Operating 5% to 93% (non-condensing) Altitude: Operating 0~ 5000m (0~ 16404 ft ) Non-Operating 0~ 12192m (0~ 40000 ft ) 53 Preset Display Modes I2367FH / I2267FWH / I2367F / I2267Fw STAND Resolution HORIZONTAL VERTICAL FREQUENCY(kHz) FREQUENCY(Hz) 640x480@60Hz 31.469 59.940 640x480@72Hz 37.861 72.809 640x480@75Hz 37.500 75.00 800x600@56Hz 35.156 56.250 800x600@60Hz 37.879 60.317 800x600@72Hz 48.077 72.188 800x600@75Hz 46.875 75.000 1024x768@60Hz 48.363 60.004 1024x768@70Hz 56.476 70.069 1024x768@75Hz 60.023 75.029 1280x1024@60Hz 63.981 60.020 1280x1024@75Hz 79.976 75.025 WXGA+ 1440x900@60Hz 55.935 59.887 WSXGA 1680x1050@60Hz 65.290 59.954 HD 1920x1080@60Hz 67.500 60.000 *** 1280x960@60HZ 60.000 60.000 IBM 640x350@70Hz 31.469 70.087 720x400@70Hz 31.469 70.087 640x480@67Hz 35.000 66.667 832x624@75Hz 49.725 74.551 1024x768@75Hz 60.241 74.927 VGA SVGA XGA SXGA MODE DOS MAC MODE VGA MAC MODE SVGA MAC MODE XGA 54 I2067F STAND Resolution HORIZONTAL VERTICAL FREQUENCY(kHZ) FREQUENCY(Hz) 640x480@60Hz 31.469 59.940 640x480@72Hz 37.861 72.809 640x480@75Hz 37.500 75.00 800x600@56Hz 35.156 56.250 800x600@60Hz 37.879 60.317 800x600@72Hz 48.077 72.188 800x600@75Hz 46.875 75.000 1024x768@60Hz 48.363 60.004 1024x768@70Hz 56.476 70.069 1024x768@75Hz 60.023 75.029 1280x1024@60Hz 63.981 60.020 1280x1024@75Hz 79.976 75.025 WSXGA 1280x720@60Hz 45.000 60.000 HD 1600x900@60Hz 60.000 60.000 IBM 640x350@70Hz 31.469 70.087 720x400@70Hz 31.469 70.087 640x480@67Hz 35.000 66.667 832x624@75Hz 49.725 74.551 4x768@75Hz 1024 0.241 60 74.927 VGA SVGA XGA SXGA MODE DOS MAC MODE VGA MAC MODE SVGA C MODE MAC X XGA 55 Pin Assignments Pin Number 15-Pin Side of the Signal Cable 1 Video-Red 2 Video-Green 3 Video-Blue 4 N.C. 5 Detect Cable 6 GND-R 7 GND-G 8 GND-B 9 +5V 10 Ground 11 N.C. 12 DDC-Serial data 13 H-sync 14 V-sync 15 DDC-Serial clock Pin No. Signal Name Pin No. Signal Name Pin No. Signal Name 1 TMDS Data 2+ 9 TMDS Data 0 17 DDC/CEC Ground 2 TMDS Data 2 Shield 10 TMDS Clock + 18 +5V Power 3 TMDS Data 2 11 TMDS Clock Shield 19 Hot Plug Detect 4 TMDS Data 1+ 12 TMDS Clock 5 TMDS Data 1Shield 13 CEC 6 TMDS Data 1 14 Reserved (N.C. on device 7 TMDS Data 0+ 15 SCL 8 TMDS Data 0 Shield 16 SDA 56 Pin Number 24-Pin Color Display Signal Cable Pin Number 24-Pin Color Display Signal Cable 1 TMDS data 2－ 13 TMDS data 3＋ 2 TMDS data 2＋ 14 ＋5V Power 3 TMDS data 2/4 Shield 15 Ground (for+5V) 4 TMDS data 4－ 16 Hot Plug Detect 5 TMDS data 4＋ 17 TMDS data 0－ 6 DDC Clock 18 TMDS data 0＋ 7 DDC Data 19 TMDS data 0/5 Shield 8 N.C. 20 TMDS data 5－ 9 TMDS data 1－ 21 TMDS data 5＋ 10 TMDS data 1＋ 22 TMDS Clock Shield 11 TMDS data 1/3 Shield 23 TMDS Clock + 12 TMDS data 3－ 24 TMDS Clock － Plug and Play Plug & Play DDC2B Feature This monitor is equipped with VESA DDC2B capabilities according to the VESA DDC STANDARD. It allows the monitor to inform the host system of its identity and, depending on the level of DDC used, communicate additional information about its display capabilities. The DDC2B is a bi-directional data channel based on the I2C protocol. The host can request EDID information over the DDC2B channel. 57 Regulation FCC Notice FCC Class B Radio Frequency Interference Statement WARNING: (FOR FCC CERTIFIED MODELS) NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. NOTICE : The changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Shielded interface cables and AC power cord, if any, must be used in order to comply with the emission limits. The manufacturer is not responsible for any radio or TV interference caused by unauthorized modification to this equipment. It is the responsibilities of the user to correct such interference. It is the responsibility of the user to correct such interference. CE Declaration of Conformity This product is in conformity with the following standards • EN60950-1:2006 and A11+A1 (Safety requirement of Information Technology Equipment). • EN 55022:2006+A1: 2007 (Radio Disturbance requirement of Information Technology Equipment). • EN55024:1998+A1:2001+A2:2003 (Immunity requirement of Information Technology Equipment). • EN 61000-3-2:2006+A1: 2009+A2: 2009 (Harmonic current emissions). • EN 61000-3-3:2008 (Voltage fluctuations & flicker) following provisions of directives applicable. • 2006/95/EC (Low Voltage Directive). • 2004/108/EC (EMC Directive). • 2005/32/EC (EuP Directive, EC No. 1275/2008 mplementing Directive for Standby and Off mode power consumption) and is produced by a manufacturing organization on ISO9000 level. 58 WEEE Declaration Disposal of Waste Equipment by Users in Private Household in the European Union. This symbol on the product or on its packaging indicates that this product must not be disposed of with your other household waste.Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment.The separate collection and recycling of your waste equipment at the time of disposal will help to conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. For more information about where you can drop off your waste equipment for recycling, please contact your local city office, your household waste disposal service or the shop where you purchased the product . 59 WEEE/E-Waste declaration for India This symbol on the product or on its packaging indicates that this product must not be disposed of with your other household waste.Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment.The separate collection and recycling of your waste equipment at the time of disposal will help to conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. For more information about where you can drop off your waste equipment for recycling in India, please visit the below web link. www.aocindia.com/ewaste.php 6055 Service Warranty Statement for Europe LIMITED THREE-YEAR WARRANTY* AOC Color Monitors sold within Europe AOC International (Europe) BV warrants this product to be free from defects in material and workmanship for a period of Three (3) years after the original date of consumer purchase. During this period, AOC International (Europe) BV will, at its option, either repair the defective product with new or rebuilt parts, or replace it with a new or rebuilt product at no charge except as *stated below. The defective products that are replaced become the property of AOC International (Europe) BV. If the product appears to be defective, please contact your local dealer or refer to the warranty card when attached to the product. Deliver the dated proof of purchase to the AOC Authorized Service Center. If you cannot deliver the product in person: Pack it in its original shipping container (or equivalent) Put the RMA number on the address label Put the RMA number on the shipping carton Insure it (or assume the risk of loss/damage during shipment) Pay all shipping charges AOC International (Europe) BV is responsible neither for any damage or loss during inbound transport damage nor to inbound product that was not properly packaged. AOC International (Europe) BV will pay the return shipping charges within one of the countries specified within this warranty statement. AOC International (Europe) BV is not responsible for any costs associated with the transportation of product across international borders. This includes the international border within the European Union. * This limited warranty does not cover any losses or damages that occur as a result of Shipping or improper installation or maintenance Misuse Neglect Any cause other than ordinary commercial or industrial application Adjustment by non-authorized source Repair, modification, or installation of options or parts by anyone other than an AOC Authorized Service Center Improper environment Excessive or inadequate heating or air conditioning or electrical powers failures, surges, or other irregularities This limited warranty does not cover any of the product firmware or hardware that you or any third party have 61 modified or altered; you bear the sole responsibility and liability for any such modification or alteration. ALL EXPRESS AND IMPLIED WARRANTIES FOR THIS PRODUCT (INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE) ARE LIMITED IN DURATION TO A PERIOD OF THREE (3) YEARS FOR PARTS AND LABOR FROM THE ORIGINAL DATE OF CONSUMER PURCHASE. NO WARRANTIES (EITHER EXPRESSED OR IMPLIED) APPLY AFTER THIS PERIOD. AOC INTERNATIONAL (EUROPE) BV OBLIGATIONS AND YOUR REMEDIES HEREUNDER ARE SOLELY AND EXCLUSIVELY AS STATED HERE. AOC INTERNATIONAL (EUROPE) BV LIABILITY, WHETHER BASED ON CONTRACT, TORT, WARRANTY, STRICT LIABILITY, OR OTHER THEORY, SHALL NOT EXCEED THE PRICE OF THE INDIVIDUAL UNIT WHOSE DEFECT OR DAMAGE IS THE BASIS OF THE CLAIM. IN NO EVENT SHALL AOC INTERNATIONAL (EUROPE) BV BE LIABLE FOR ANY LOSS OF PROFITS, LOSS OF USE OR FACILITIES OR EQUIPMENT, OR OTHER INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGE. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. ALTHOUGH THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, YOU MAY HAVE OTHER RIGHTS, WHICH MAY VARY FROM COUNTRY TO COUNTRY. THIS LIMITED WARRANTY IS ONLY VALID FOR PRODUCTS PURCHASED IN THE MEMBER COUNTRIES OF THE EUROPEAN UNION. Information in this document is subject to change without notice. For more details, please visit: http://www.aoc-europe.com/en/service/index.php 62 Warranty Statement for North & South America (excluding Brazil) WARRANTY STATEMENT for AOC Color Monitors Including those Sold within North America as Specified Envision Peripherals, Inc. warrants this product to be free from defects in material and workmanship for a period of three (3) years for parts & labor and one (1) year for CRT Tube or LCD Panel after the original date of consumer purchase. During this period, EPI ( EPI is the abbreviation of Envision Peripherals, Inc. ) will, at its option, either repair the defective product with new or rebuilt parts, or replace it with a new or rebuilt product at no charge except as *stated below. The parts or product that are replaced become the property of EPI. In the USA to obtain service under this limited warranty, call EPI for the name of the Authorized Service Center closest to your area. Deliver the dated proof of purchase to the EPI Authorized Service Center. If you cannot deliver the product in person: Pack it in its original shipping container (or equivalent) Put the RMA number on the address label Put the RMA number on the shipping carton Insure it (or assume the risk of loss/damage during shipment) Pay all shipping charges EPI is not responsible for damage to inbound product that was not properly packaged. EPI will pay the return shipment charges within one of the countries specified within this warranty statement. EPI is not responsible for any costs associated with the transportation of product across international borders. This includes the international borders of the countries within this warranty statements. In the United States and Canada contact your Dealer or EPI Customer Service, RMA Department at the toll free number (888) 662-9888. Or you can request an RMA Number online at www.aoc.com/na-warranty. * This limited warranty does not cover any losses or damages that occur as a result of: Shipping or improper installation or maintenance Misuse Neglect Any cause other than ordinary commercial or industrial application Adjustment by non-authorized source Repair, modification, or installation of options or parts by anyone other than an EPI Authorized Service Center Improper environment Excessive or inadequate heating or air conditioning or electrical power failures, surges, or other irregularities This three-year limited warranty does not cover any of the product's firmware or hardware that you or any third party have modified or altered; you bear the sole responsibility and liability for any such modification or alteration. 63 ALL EXPRESS AND IMPLIED WARRANTIES FOR THIS PRODUCT (INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE) ARE LIMITED IN DURATION TO A PERIOD OF THREE (3) YEARS FOR PARTS AND LABOR AND ONE (1) YEAR FOR CRT TUBE OR LCD PANEL FROM THE ORIGINAL DATE OF CONSUMER PURCHASE. NO WARRANTIES (EITHER EXPRESSED OR IMPLIED) APPLY AFTER THIS PERIOD. IN THE UNITED STATES OF AMERICA, SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATIONS MAY NOT APPLY TO YOU. EPI OBLIGATIONS AND YOUR REMEDIES HEREUNDER ARE SOLELY AND EXCLUSIVELY AS STATED HERE. EPI’ LIABILITY, WHETHER BASED ON CONTRACT, TORT. WARRANTY, STRICT LIABILITY, OR OTHER THEORY, SHALL NOT EXCEED THE PRICE OF THE INDIVIDUAL UNIT WHOSE DEFECT OR DAMAGE IS THE BASIS OF THE CLAIM. IN NO EVENT SHALL ENVISION PERIPHERALS, INC. BE LIABLE FOR ANY LOSS OF PROFITS, LOSS OF USE OR FACILITIES OR EQUIPMENT OR OTHER INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGE. IN THE UNITED STATES OF AMERICA, SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES. SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. ALTHOUGH THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY HAVE OTHER RIGHTS WHICH MAY VARY FROM STATE TO STATE. In the United States of America, this limited warranty is only valid for Products purchased in the Continental United States, Alaska, and Hawaii. Outside the United States of America, this limited warranty is only valid for Products purchased in Canada. Information in this document is subject to change without notice. For more details, please visit: USA: http://us.aoc.com/support/warranty ARGENTINA: http://ar.aoc.com/support/warranty BOLIVIA: http://bo.aoc.com/support/warranty CHILE: http://cl.aoc.com/support/warranty COLOMBIA: http://co.aoc.com/warranty COSTA RICA: http://cr.aoc.com/support/warranty DOMINICAN REPUBLIC: http://do.aoc.com/support/warranty ECUADOR: http://ec.aoc.com/support/warranty EL SALVADOR: http://sv.aoc.com/support/warranty GUATEMALA: http://gt.aoc.com/support/warranty HONDURAS: http://hn.aoc.com/support/warranty NICARAGUA: http://ni.aoc.com/support/warranty PANAMA: http://pa.aoc.com/support/warranty PARAGUAY: http://py.aoc.com/support/warranty PERU: http://pe.aoc.com/support/warranty URUGUAY: http://pe.aoc.com/warranty VENEZUELA: http://ve.aoc.com/support/warranty IF COUNTRY NOT LISTED: http://latin.aoc.com/warranty 64 Only for AOC branded monitors sold within the continental United States. All AOC branded monitors are now covered by the EASE Program. If your monitor malfunctions at any time during the first three months, AOC will provide a replacement monitor within 72 hours after you are approved for our program. If your monitor qualifies for the EASE program, AOC will pay for freight both ways. Step 1: Phone our TECH Department at 888.662.9888 Step 2: Fill out and return EASE registration forms by mail or fax. Step 3: We will issue a Return Authorization Number upon verification into the program. Step 4: A monitor will be advance shipped to your location. Step 5: We will issue a UPS Call Tag to pick up the defective unit. Step 6: Please review the following chart to see your EASE program qualifications. WARRANTY PERIOD Within the first three months of purchase: Covered by EASE Between 4 months – 1 Year Between 1 Year - 3 Years: Covered by standard limited warranty COVERAGE AT NO CHARGE CUSTOMER CHARGES - New AOC monitor - None* - Call tag dispatched and return freight charges via UPS - All Parts & Labor Including CRT - UPS Return Freight to AOC Tube & LCD Panel - Parts & Labor (excluding CRT Tube & LCD Panel) - UPS Return Freight to AOC *AOC will need to obtain a credit card number if you would like to get a new AOC monitor advanced shipped to your location, prior to the defective unit arriving at AOC’s service center. If you do not wish to supply a credit card, AOC will only ship the new monitor, once the defective unit arrives at the AOC service center. us .aoc.com ６5 Congratulations! This product is designed for both you and the planet! TCO Development works for sustainable IT manufacture, use and recycling of IT products reflecting environmental, social and economic responsibility. TCO Certified is a third party verified program, where every product model is tested by an accredited impartial test laboratory. TCO Certified represents one of the toughest certifications for ICT products worldwide. Some of the Usability features of TCO Certified Displays: Visual Ergonomics for image quality is tested to ensure top performance and reduce sight and strain problems. Important parameters are Resolution, Luminance, Contrast, Reflection and Colour characteristics Products are tested according to rigorous safety standards at impartial laboratories Electric and magnetic fields emissions as low as normal household background levels Workload ergonomics to ensure a good physical environment Some of the Environmental features of TCO Certified Displays: Production facilities have an Environmental Management System (EMAS or ISO 14001) Low energy consumption to minimize climate impact Restrictions on Chlorinated and Brominated flame retardants, plasticizers, plastics and heavy metals such as cadmium, mercury and lead (RoHS compliance) Both product and product packaging is prepared for recycling The brand owner offers take-back options Corporate Social Responsibility The brand owner demonstrates the product is manufactured under working practices that promote good labour relations and working conditions. The Criteria Document can be downloaded from our web site. The criteria included in this label have been developed by TCO Development in co-operation with scientists, experts, users as well as manufacturers all over the world. Since the end of the 1980s TCO has been involved in influencing the development of IT equipment in a more user and environmentally friendly direction. Our ICT product labeling system began in 1992 and is now requested by users and ICT-manufacturers all over the world. For more information, please visit www.tcodevelopment.com TCO Certified Document for Displays version. 2.3 ６６
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Tagged PDF : No XMP Toolkit : 3.1-701 Modify Date : 2012:07:31 13:58:37+08:00 Create Date : 2011:03:22 15:33:47+08:00 Metadata Date : 2012:07:31 13:58:37+08:00 Creator Tool : Acrobat PDFMaker 9.0 Word 版 Document ID : uuid:66be1da1-d1a1-40e2-9908-bbb08106afdc Instance ID : uuid:28910f9c-f42c-435b-98d2-3db92fd75b76 Subject : 17 Format : application/pdf Title : Creator : cq Producer : Adobe PDF Library 9.0 Source Modified : D:20110322073257 Base 0020 Target : _blank Has XFA : No Page Count : 66 Page Layout : OneColumn Base Target : _blank Author : cqEXIF Metadata provided by EXIF.tools