Apex Toys AM08S 2.4G Transmitting Box User Manual 2ADSOAM08S manual

Download:
Mirror Download [FCC.gov]
Document ID	2478528
Application ID	BJjLKddjIB2KBlQnEadRtw==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	16.75kB (209328 bits)
Date Submitted	2014-12-19 00:00:00
Date Available	2014-12-19 00:00:00
Creation Date	2014-12-14 13:45:03
Producing Software	Acrobat Distiller 7.0 (Windows)
Document Lastmod	2014-12-14 13:45:26
Document Title	Microsoft Word - 2ADSOAM08S manual.doc
Document Creator	PScript5.dll Version 5.2
Document Author:	Administrator

（Apex Toys)
Manaual
The important parameters：
1，2.4G Remote control distance is more than 30 meters
2，Pull the transmitter out and enter the sleep time: 10 seconds.
3，Usage duration: more than 10 hours
4，Static Battery when it sleep: below 0.1mA
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:(1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
（Apex Toys)
Block diagram
3.5 mm plug Audio signal
Charge system
80MAH li-polymer
battery
Master MCU, with a
sleep function
2.4G
Transmitting
module
Power Light
Product Features:
This product can be connected with the mobile phone to control the toy plane
Product main components：
（Apex Toys)
1. The upper body of transmitter
2. The red light
3. The bottom body of transmitter
4. Charger hole
5. 3.5mm Audio plug
6. PCBA
7.
Master MCU
8. 2.4G transmitting module
（Apex Toys)
9. Battery
10. Antenna
11. Transparent hold LED
2.4G Audio transmitter function light description：
NO.
Name
The upper body
of transmitter
Power light
The bottom body
of transmitter
Charger hole
3.5mm audio
plug
PCBA
Master MCU
2.4G transmitting
module
Battery
10
Antenna
Transparent hold
LED
11
Material
30%PC+ABS
30%PC+ABS
Color
Black/White
Red
Black/White
Black
Nickel-plated
FR-4
Requirements
Injection& Sink printing
Soft and Not dazzling
Injection& Sink printing
DC Seat
Standard mobile phones
with 3.5mm four plug
section
White word & Green
HAL
oil
Black
White word & Green
HAL
oil
80MAH li-polymer
battery
White
Copper
Transparent
ABS
（Apex Toys)
Function
light
Color
Indicator
Light
Red
Function Description
Functioning Pattern
The status of the lamp
Successful connection
Flashing slowly, 1/second
on the phone
2.4G
connected
Often Bright state
successfully
Sleep
Light off
No connected
Light off
The internal assembly structure：
The internal
assembly structure
（Apex Toys)
The upper body of transmitter
The bottom body of transmitter
（Apex Toys)
2.4G Audio transmitter matching process：
Switch on the Helicopter
The LED lamp is flashing.
To insert the 2.4 audio transmitter into mobile phone
Enter the corresponding control software
Push the ON/OFF on the software to the ON file, Then the 2.4G audio
transmitter will paired with Aircraft automatically.
The pairing is successful, the LED light on the 2.4G transmitter will
light up, and the LED light on the plan also will light up.
Operation in the user interface, Then you
can control the toys.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0 (Windows)
Creator Tool                    : PScript5.dll Version 5.2
Modify Date                     : 2014:12:14 13:45:26+08:00
Create Date                     : 2014:12:14 13:45:03+08:00
Metadata Date                   : 2014:12:14 13:45:26+08:00
Format                          : application/pdf
Title                           : Microsoft Word - 2ADSOAM08S manual.doc
Creator                         : Administrator
Document ID                     : uuid:f527f3a1-518a-4e5f-8255-76d3a9d04b96
Instance ID                     : uuid:b97477ee-2f1f-4f04-9839-047df2a93f77
Has XFA                         : No
Page Count                      : 7
Author                          : Administrator

EXIF Metadata provided by EXIF.tools