Apple A1221 Bluetooth Headset User Manual A65 No illustrations indd

Apple Inc. Bluetooth Headset A65 No illustrations indd

Users Manual

iPhone Bluetooth HeadsetUser’s Guide
3Congratulations on your new iPhone Bluetooth® Headset. Use the headset to talk hands-free on your iPhone. Follow these instructions to get started.Pair the Headset with iPhone 1 Connect the included iPhone Dual Dock to a USB 2.0 port on your computer (not on the keyboard). 2 Connect iPhone and the headset to the dock. The headset pairs with iPhone automatically.The fi rst time you connect the headset, let it charge for about an hour until the status light on the headset turns from amber to green.3 Remove iPhone and the headset from the dock. Then press the button on the top of the headset so that calls will be routed through the headset.
4You can also pair the headset with iPhone and charge the headset using the included iPhone Travel Cable. Connect the cable to your computer, then connect the headset and iPhone to the cable.
5Make or Answer a Call 1 Place the headset in either ear with the microphone pointed towards your mouth.Note: Placing the included foam pad over the speaker may provide a more comfortable fi t. 2 Make a call on iPhone, or press the button on top of the headset to answer an incoming call.If you answer an incoming call by tapping the iPhone touchscreen, audio is routed through iPhone. 3 When you fi nish, press the button to end the call.Adjust the Volume m Use the volume buttons on the side of iPhone.WARNING: For important safety information about avoiding hearing loss, see page 13.
6What Else You Can DoTo Do thisAnswer incoming call Press button.End current call Press button.Decline incoming call Press button for about one second, until you hear a beep.Switch to incoming or on-hold call and put current call on holdPress button.Switch to incoming or on-hold call and end current callPress button for about one second, until you hear a beep.Check whether headset is turned onPress button.If headset is on, status light blinks green and headset beeps.Turn headset on Press and hold button for about three seconds, until you see the status light blink green or hear four rising tones.Turn headset o∂ Press and hold button for about four seconds, until you see the status light blink amber or hear four falling tones.
7Switch from the Headset to iPhoneTo stop using the headset and hear calls through iPhone instead, you can either: m Turn the headset o∂ . You can turn it on at any time to use it with iPhone again. m During a call, tap Audio Source on iPhone and choose iPhone or Speaker (for speakerphone).Reconnect the Headset to iPhoneYou can tell that calls will be routed through the headset if the Bluetooth icon (◊) in the iPhone status bar is blue or white (depending on which application you’re using). If the headset gets disconnected from iPhone, two low beeps sound from the headset. You can tell that the headset is disconnected from iPhone if the Bluetooth icon in the status bar is gray or isn’t present.To route calls through the headset: m Press the button to reinitiate a connection. m If that doesn’t work, make sure the headset is turned on, charged, and in range of iPhone (within about 30 feet). m If that doesn’t work, on iPhone make sure Bluetooth is turned on. From the Home screen, choose Settings > General > Bluetooth and turn Bluetooth on. m If that doesn’t work, pair the headset with iPhone again. See page 3.
8Charge the HeadsetWhen the headset doesn’t have much charge left, a long beep sounds every ten seconds.To charge the headset: 1 Connect the included cable or dock to your computer. Or connect it to the Apple USB Power Adapter that comes with iPhone and connect the adapter to a standard power outlet. 2 Connect the headset to the cable or dock.A fully depleted headset recharges in about an hour and a half.Status light amber = ChargingStatus light green = Completely charged3 Remove the headset from the dock. Press the button to connect the headset to iPhone, so that calls are routed through the headset.To see how much charge is left: m Connect iPhone and the headset to the dock or cable. The iPhone screen shows the headset’s battery level.The headset contains an internal, non-user-replaceable battery. Rechargeable batteries have a limited number of charge cycles and eventually will wear out. Battery life and number of charge cycles vary by use and settings. For more information, go to www.apple.com/batteries. For more information about disposal of the headset, see page 17.WARNING: For important safety information about charging the headset, see page 13.
9Use the Headset with Another Phone or DeviceYou can use the headset with some other Bluetooth devices, such as another phone. And you can pair the headset to iPhone manually, if you don’t have the cable or dock handy.You can also pair the headset with some Bluetooth enabled computers and talk to friends using an audio-enabled instant messaging application like iChat.To set the headset to be discoverable, so the other device can sense it: 1 Turn the headset o∂ . 2 Press and hold the headset button for about eight seconds, until you hear the startup tones and then fi ve quick high beeps.The headset remains discoverable for about fi ve minutes. The status light blinks green for as long as the headset is discoverable.To pair the headset with another phone or pair it with iPhone manually: 1 On the phone, turn Bluetooth on and set the phone to search for other Bluetooth devices. On iPhone, you do this by choosing Settings > General > Bluetooth and turning Bluetooth on. 2 Set the headset to be discoverable (see above). 3 On the phone, choose iPhone Bluetooth Headset and enter the PIN code 0000.See the instructions that came with your phone for more information about pairing it with Bluetooth devices.
10To pair the headset with a Bluetooth enabled Mac using Mac OS X version 10.4.9 or later: 1 Open System Preferences and click Bluetooth. 2 Click Devices and click Set Up New Device. Then choose Headset. 3 Set the headset to be discoverable. 4 Follow the onscreen instructions. When prompted for a passkey, enter 0000.To use the headset with iChat: 1 Pair the headset with your Mac. 2 In iChat, choose iChat > Preferences and click Video. 3 Choose iPhone Bluetooth Headset from the Microphone and Sound Output pop-up menus. 4 Start an audio or video chat.To pair the headset with another computer (such as a Windows PC) or Bluetooth device:Follow the instructions that came with the computer or device. When prompted for a passkey or PIN, enter 0000.Use the Dock to Play Music Through External Speakers m Connect speakers with an audio cable that has a standard 3.5 millimeter stereo miniplug to the Line Out port on the back of the dock. Then connect iPhone and play music to hear it through the speakers.
11Tips and TroubleshootingIf the headset isn’t responding or working correctly, try these steps in order until it starts working. m Make sure the headset is on. Press the button. If the status light doesn’t blink green, press and hold the button for about three seconds, until you see the status light blink green or hear four rising tones. m Make sure iPhone is turned on. m Make sure the headset and iPhone are charged. m During a call, make sure iPhone is set to play sound through the headset. Tap Audio Source and choose iPhone Bluetooth Headset. m Make sure iPhone is paired with the headset. See page 3. m On iPhone, make sure Bluetooth is turned on. From the Home screen, choose Settings > General > Bluetooth and turn Bluetooth on. m On iPhone, choose Settings and turn Airplane Mode on. Then wait about three seconds and turn it o∂ again.For more tips and troubleshooting, go to: www.apple.com/support/iphone
12± Read all safety information below and operating instructions before using the iPhone Bluetooth Headset to avoid injury.Important Safety InformationWARNING: Failure to follow these safety instructions could result in fi re, electric shock, or other injury or damage.Handling the iPhone Bluetooth HeadsetDo not drop, disassemble or open, crush, bend or deform, puncture, shred, microwave, incinerate, paint, or insert foreign objects into the iPhone Bluetooth Headset.Avoiding Water and Wet LocationsDo not use the iPhone Bluetooth Headset in rain, or near washbasins or other wet locations. Take care not to spill any food or liquid on the iPhone Bluetooth Headset. In case the iPhone Bluetooth Headset gets wet, turn it o∂ (press and hold the button for about four seconds, until the status light blinks amber) before cleaning, and allow it to dry thoroughly before turning it on again. Do not attempt to dry the iPhone Bluetooth Headset with an external heat source, such as a microwave oven or hair dryer.Repairing the iPhone Bluetooth HeadsetNever attempt to repair or modify the iPhone Bluetooth Headset yourself. The iPhone Bluetooth Headset does not contain any user-serviceable parts. If the iPhone Bluetooth Headset has been submerged in water, punctured, or subjected to a severe fall, do not use it until you take it to an Apple Authorized Service Provider.
13Charging the iPhone Bluetooth HeadsetTo charge the iPhone Bluetooth Headset, only use the iPhone Travel Cable or iPhone Dual Dock with an Apple USB Power Adapter or a high-power USB port on another device that is compliant with the USB 2.0 or 1.1 standards, or another Apple-branded product or accessory designed to work with the iPhone Bluetooth Headset.Read all safety instructions for any products and accessories before using with the iPhone Bluetooth Headset. Apple is not responsible for the operation of third party accessories or their compliance with safety and regulatory standards.When you use the Apple USB Power Adapter to charge the iPhone Bluetooth Headset, make sure that the power adapter is fully assembled before you plug it into a power outlet. Then insert the Apple USB Power Adapter fi rmly into the power outlet. Do not connect or disconnect the Apple USB Power Adapter with wet hands. Do not use any power adapter other than the Apple USB Power Adapter to charge the iPhone Bluetooth Headset.Avoiding Hearing DamagePermanent hearing loss may occur if the iPhone Bluetooth Headset is used at high volume. Set the volume to a safe level. You can adapt over time to a higher volume of sound that may sound normal but can be damaging to your hearing. If you experience ringing in your ears or muπ ed speech, stop listening and have your hearing checked. The louder the volume, the less time is required before your hearing could be a∂ ected. Hearing experts suggest that to protect your hearing: Â Limit the amount of time you use the iPhone Bluetooth Headset at high volume.
14 Â Avoid turning up the volume to block out noisy surroundings. Â Turn the volume down if you can’t hear people speaking near you. Driving SafelyUse of the iPhone Bluetooth Headset while driving a vehicle or riding a bicycle is not recommended and is illegal in some areas. Check and obey the laws and regulations on the use of mobile devices like iPhone in the areas where you drive. Be careful and attentive while driving.Choking HazardsThe iPhone Bluetooth Headset is small and may present a choking hazard to small children. Keep from small children.For Vehicles Equipped with an Air BagAn air bag infl ates with great force. Do not store the iPhone Bluetooth Headset or any of its accessories in the area over the air bag or in the air bag deployment area.Radio Frequency InterferenceNearly every electronic device is subject to radio frequency interference from external sources if inadequately shielded, designed, or otherwise confi gured to be compatible. As a result, the iPhone Bluetooth Headset may cause interference with other devices. Follow these instructions to avoid interference problems.AircraftFederal Aviation Administration (FAA) regulations may prohibit using wireless devices while in the air. Turn the iPhone Bluetooth Headset o∂ when on an airplane.
15VehiclesRF signals may a∂ ect installed or inadequately shielded electronic systems in motor vehicles. Check with the manufacturer or its representative regarding your vehicle.Electronics DevicesMost modern electronic equipment is shielded from RF signals. However, certain electronic equipment may not be shielded against the RF signals from the iPhone Bluetooth Headset.Hearing AidsThe iPhone Bluetooth Headset may interfere with some hearing aids. If it does, consult the hearing aid manufacturer or your physician for alternatives or remedies.Other Medical DevicesIf you use any other personal medical device, consult the manufacturer of your device or your physician to determine if it is adequately shielded from external RF energy.Turn the iPhone Bluetooth Headset o∂ in health care facilities when any regulations posted in these areas instruct you to do so. Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy.Posted FacilitiesTurn o∂ the iPhone Bluetooth Headset in any facility where posted notices so require.
16Blasting AreasTo avoid interfering with blasting operations, turn o∂ the iPhone Bluetooth Headset when in a “blasting area” or in areas posted “Turn o∂ two-way radio.” Obey all signs and instructions.Important Handling InformationNOTICE: Failure to follow these handling instructions could result in damage to the iPhone Bluetooth Headset or other property.Using Connectors and PortsNever force a connector into a port. Check for obstructions on the port. If the connector and port don’t join with reasonable ease, they probably don’t match. Make sure that the connector matches the port and that you have positioned the connector correctly in relation to the port.Keeping the iPhone Bluetooth Headset Within Acceptable TemperaturesOperate the iPhone Bluetooth Headset in a place where the temperature is always between 0º and 35º C (32º to 95º F). The iPhone Bluetooth Headset battery life might temporarily shorten in low-temperature conditions.Store the iPhone Bluetooth Headset in a place where the temperature is always between -20º and 45º C (-4º to 113º F). Don’t leave the iPhone Bluetooth Headset in your car, because temperatures in parked cars can exceed this range.
17Disposal and Recycling InformationiPhone Bluetooth Headset Disposal and RecyclingYour iPhone Bluetooth Headset must be disposed of properly according to local laws and regulations. Because the iPhone Bluetooth Headset contains electronic components and a battery, it must be disposed of separately from household waste. When your iPhone Bluetooth Headset reaches its end of life, contact local authorities to learn about disposal and recycling options, or simply drop it o∂ at your local Apple retail store or return it to Apple. For more information, go to:www.apple.com/environment/recyclingApple and the EnvironmentAt Apple, we recognize our responsibility to minimize the environmental impacts of our operations and products. For more information go to:www.apple.com/environment
18FCC Compliance StatementThis device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.Important: Changes or modifi cations to this product not authorized by Apple could void the EMC compliance and negate your authority to operate the product. This product has demonstrated EMC compliance under conditions that included the use of compliant peripheral devices and shielded cables between system components. It is important that you use compliant peripheral devices and shielded cables between system components to reduce the possibility of causing interference to radios, televisions, and other electronic devices.
© 2007 Apple Inc. All rights reserved. Apple, the Apple logo, Mac, and Mac OS are trademarks of Apple Inc., registered in the U.S. and other countries.iPhone is a trademark of Apple Inc.The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by Apple Inc. is under license.034-4161-APrinted in XXXX

Navigation menu