Apple A1893 Tablet Device User Manual iPad User Guide

Download:
Mirror Download [FCC.gov]
Document ID	3778156
Application ID	AVLsDZALauDoFZOshSJmIw==
Document Description	Users Manual 2
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	235.42kB (2942772 bits)
Date Submitted	2018-03-13 00:00:00
Date Available	2018-05-01 00:00:00
Creation Date	2018-02-26 21:12:44
Producing Software	Mac OS X 10.13.3 Quartz PDFContext
Document Lastmod	2018-03-01 11:36:20
Document Title	iPad User Guide
Document Creator	Safari
Document Author:	fsegal

Take a Live Photo. (on supported models) A Live Photo captures what happens just
before and after you take your photo, along with the audio. Choose Photo, tap
to turn
on Live Photos (yellow is on), then tap the Shutter button. Live photos are marked with
“Live” in the corner. You can edit Live Photos and add filters to them in the Photos app.
Live Photos works with the rear camera and the FaceTime camera.
Take Burst shots. (on supported models) With the camera in Photo or Square mode,
touch and hold the Shutter button to take rapid-fire photos in bursts. Lift your finger to
stop. The counter shows how many shots youʼve taken. To see the suggested shots and
select the photos you want to keep, tap the burst thumbnail, then tap Select. The gray
dots below the thumbnails mark the suggested photos. To copy a photo from the burst as
a separate photo in Photos, tap the circle in the lower-right corner of the photo. To delete
the burst of photos, tap the bursts thumbnail, then tap
. To choose which burst photos
to upload to your Photo Stream, go to Settings > Photos.
Take a selfie with Retina Flash. (on supported models) Use the Retina HD display as a
flash for your selfies. Turn on the flash, switch to the FaceTime camera, then tap the
Shutter button (the display flashes on exposure).
Take a panorama photo. (rear camera) Choose Pano, tap the Shutter button, then pan
slowly in the direction of the arrow. To finish the pan, tap the button again. To pan in the
other direction, first tap the arrow. To pan vertically, rotate iPad to landscape orientation.
You can reverse the direction of a vertical pan, too.
Use the capture timer. Use the capture timer to give yourself time to be in the shot. First
set up iPad where you want, then frame your shot. Tap
Shutter button.
, tap 3s or 10s, then tap the
Preserve camera settings. You can preserve the last camera mode setting you used so
itʼs not reset when you next open Camera. Go to Settings > Camera > Preserve Settings,
then turn on Camera Mode. You can also preserve Live Photos settings on supported
models.
Read a QR code. Camera automatically detects a QR code when itʼs in the picture frame.
Tap the notification that appears to go to the relevant website or app.
Take a screenshot. To capture whatʼs displayed on your screen, simultaneously press
and then release the Home button and the Sleep/Wake button. Tap the screenshot, tap
Done, then choose Save to Photos or Delete Screenshot. If you save the screenshot, you
can view it in the Screenshots album or in the All Photos album if youʼre using iCloud
Photo Library.
Adjust shutter-sound volume. Adjust the volume of the shutter sound using the Ringer
and Alerts settings in Settings > Sounds. Or mute the sound using the volume down
button or the Ring/Silent switch, if your iPad has one. (In some countries muting is
disabled.)
Adjust for the perfect shot
About auto exposure and face detection. When youʼre taking a picture, a rectangle
may briefly appear to indicate where the automatic exposure is set. When you
photograph people, face detection balances the exposure across many faces. A
rectangle appears for each face detected.
Lock the focus and exposure. Exposure is automatic, but you can set the exposure
manually for the next shot by tapping an object or area on the screen. To lock the
exposure and focus, touch and hold until the rectangle pulses. The screen indicates
when exposure and focus are locked. Take as many photos as you want. When you tap
the screen again, exposure and focus unlock, and the automatic settings and face
detection turn back on.
Note: Tapping the screen sets the focus and the exposure, and face detection is
temporarily turned off.
Adjust the exposure. Tap to see
next to the exposure rectangle, then slide up or
down to adjust the exposure.
Turn the flash on or off. Tap
. The flash on the back of your device also provides extra
light when you need it. To use the flash as a flashlight, open Control Center, then tap the
Flashlight button.
Make it better. You can edit photos and trim videos, right on iPad. See Edit photos and
trim videos.
Shoot video
With Camera you can shoot video, including slow-motion and time-lapse videos.
Record a video. Choose Video, then tap the Record button or press either volume button
to start and stop recording.
Change the frame rate and video resolution settings. Go to Settings > Camera >
Record Video. By default, video records at 30 fps (frames per second). Depending on
your model, you can choose other frame rates and video resolution settings. The faster
the frame rate and the higher the resolution, the larger the resulting video file.
Snap a still while recording. Tap the white Shutter button.
Take it slow. (rear camera) Choose Slo-mo to capture slow-motion video (on supported
models). When you edit the video you can set just a portion of it to play back in slow
motion, and the rest plays back at regular speed. To change the Slo-mo settings, go to
Settings > Camera > Record Slo-mo.
Set the slow-motion section of a video. Tap the video thumbnail, then tap Edit. Slide
the vertical bars beneath the frame viewer to define the section you want to play back in
slow motion. Tap Done.
Zoom in or out when shooting video. (rear camera) Pinch the image on the screen open
to zoom in, and pinch closed to zoom out.
Capture an experience with time-lapse. Choose Time-Lapse, set up iPad where you
want, then tap the Record button to start capturing a sunset, traffic flowing, or other
experiences over a period of time. Tap the Record button again to stop. The time-lapse
photos are compiled into a short video.
With iOS 9 and later, time-lapse videos have video stabilization, which minimizes the
effect of camera movement during capture.
HDR
HDR (High Dynamic Range) helps you get great shots in high-contrast situations. iPad
takes three photos in rapid succession at different exposures—then blends them
together. The resulting photo has better detail in the bright and midtone areas.
Use HDR. (On supported models) Tap HDR. For best results, keep iPad steady and avoid
subject motion.
On some models, you can choose HDR Auto so iPad uses HDR when itʼs most effective.
Keep only the HDR version. Go to Settings > Camera, then turn off Keep Normal Photo
(by default, both the normal and HDR versions of the photo appear in Photos). In your
albums, HDR versions of photos are marked with “HDR” in the corner.
Note: By default, both the normal and HDR versions of the photo appear in Photos.
View, share, and print
Photos and videos you take on iPad are saved in Photos. With iCloud Photo Library
turned on, all new photos and videos are automatically uploaded and available in Photos
on all your devices with iOS 8.1 or later that are set up with iCloud Photo Library. When
iCloud Photo Library is turned off, you can still collect up to 1000 of your most recent
photos in the My Photo Stream album from your devices set up with iCloud.
Note: If Location Services is turned on, photos and videos are tagged with location data
that can be used by apps and photo-sharing websites. See Location Services.
View your photos. In Camera, tap the thumbnail image that appears below the Shutter
button, then swipe left or right to see the photos youʼve taken recently. Tap All Photos to
see everything in the Photos app.
Tap the screen to show or hide the controls.
View sharing and printing options. While viewing an image, tap
. See Share from
apps.
Upload photos and videos. Use iCloud Photo Library to upload photos and videos from
your iPad to iCloud. You can access them on your devices with iOS 8.1 or later where
youʼre signed in to iCloud using the same Apple ID. You can also upload and download
your photos and videos from the Photos app on iCloud.com.
Sync photos and videos to iPad from your Mac. Use the Photos settings pane in
iTunes. See Sync iPad.
Contacts
Manage contacts
With Contacts, you can view and edit your contacts lists from personal, business, and
other accounts. You can also create contacts and set up a contact card with your own
information.
Create a new contact. Tap
iPad automatically suggests new contacts from messages you receive in Mail and
invitations in Calendar, and from other apps. To turn this feature off, go to Settings >
Contacts > Siri & Search, then turn off Find Contacts in Other Apps.
Allow incoming texts or calls from a specific contact even if Do Not Disturb is on. Tap the
contact, tap Edit, tap Ringtone or Text Tone, then turn on Emergency Bypass.
Ask Siri. Say something like:
“Whatʼs my brotherʼs work address?”
“Sarah Castelblanco is my sister”
“Send a message to my sister”
Allow calls or texts from a contact to override Do Not Disturb. Tap the contact, tap
Edit, tap Ringtone or Text Tone, then turn on Emergency Bypass.
Find a contact. Tap the search field at the top of the contacts list, then enter your
search. You can also search your contacts using Search (see Search).
Quickly reach a contact. Tap one of the buttons below the contactʼs name to start a
message, call, video call, or email. To change the default contact method (for a call, for
example), touch and hold the call button, then tap a phone number.
If you use a third-party app to make video or audio calls, send messages, or send email,
you may be able to set that app as the default.
Change how your contacts are sorted and displayed. Go to Settings > Contacts.
Share a contact. Tap a contact, then tap Share Contact. See Share from apps. Sharing a
contact shares all the info from the contactʼs card.
Assign a photo to a contact. Tap a contact, tap Edit, then tap “add photo.” You can take
a photo or add one from the Photos app.
Change a label. If a field has the wrong label, such as Home instead of Work, tap Edit.
Then tap the label and choose one from the list, or tap Custom Field to create one of your
own.
Add your friendsʼ social profiles. While viewing a contact, tap Edit, then tap “add social
profile.”
Delete a contact. Go to the contactʼs card, then tap Edit. Scroll down, then tap Delete
Contact.
Add your contact info
iPad uses your Apple ID to create your My Card, but you may need to provide your
contact information to complete it.
Complete your My Card. Open Contacts, tap My Card at the top of your contacts list,
then tap Edit. Contacts suggests addresses and phone numbers to help you set up your
My Card.
If there is no My Card, tap
, then enter your information. To create a My Card with this
information, go to Settings > Contacts, tap My Info, then tap your name in the Contacts
list.
Edit your My Card. In Contacts, tap My Card at the top of your contacts list, then tap
Edit.
Add contact accounts
Besides adding contacts individually, you can:
Use your iCloud contacts: Go to Settings > [your name] > iCloud, then turn on
Contacts.
Use your Google contacts: Go to Settings > Accounts & Passwords. Tap Google, sign
in to your account, then turn on Contacts.
Add contacts from another account: Go to Settings > Accounts & Passwords > Add
Account. Choose an account, sign in to it, then turn on Contacts
Access a Microsoft Exchange Global Address List: Go to Settings > Accounts &
Passwords. Tap Exchange, sign in to your Exchange account, then turn on Contacts.
Set up an LDAP or CardDAV account to access business or school directories: Go to
Settings > Accounts & Passwords > Add Account > Other. Tap Add LDAP Account or
Add CardDAV Account, then enter the account information.
Sync contacts from your computer: In iTunes on your computer, tap Info in the device
info pane, then select Sync Contacts. For information, see iTunes Help.
Import contacts from a vCard: Tap a .vcf attachment in an email or message.
Search a directory. Tap Groups, then tap the GAL, CardDAV, or LDAP directory you want
to search. Tap Done, then enter your search. To save a personʼs info to your contacts, tap
the personʼs name.
Show or hide a group. Tap Groups, then select the groups you want to see. This button
appears only if you have more than one source of contacts.
Hide duplicate contacts
When you have contacts from multiple sources, you might have multiple entries for the
same person. To keep redundant contacts from appearing in your All Contacts list,
contacts from different sources with the same name are linked and displayed as a single
unified contact. When you view a unified contact, the title Unified Info appears.
Link contacts. If two entries for the same person arenʼt linked automatically, you can
unify them manually. Tap one of the contacts, tap Edit, tap Link Contacts, choose the
other contact entry to link to, then tap Link.
When you link contacts with different first or last names, the names on the individual
cards donʼt change, but only one name appears on the unified card. To choose which
name appears on the unified card, tap one of the linked cards, tap the contactʼs name on
that card, then tap Use This Name For Unified Card.
Note: When you link contacts, those contacts arenʼt merged. If you change or add
information in a unified contact, the changes are copied to each source account where
that information already exists.
Clock
See the time in cities around the world
Use the Clock app to view the time in various locations around the world.
Ask Siri. Say something like:
“What time is it?”
“What time is it in London?”
Manage your World Clock list. In the World Clock tab, tap Edit.
Add a city: Tap
Delete a city: Tap
, then choose a city.
Reorder the cities: Touch and hold a clock, then drag it to a new position.
Set an alarm or bedtime schedule
With the Clock app, you can set an alarm that plays a sound at a specific time. You can
also set a bedtime schedule that reminds you when to go to sleep and plays a sound
when itʼs time to wake up.
Ask Siri. Say something like:
“Wake me up tomorrow at 7 a.m.”
“Set an alarm for 9 a.m. every Friday”
“Turn off all my alarms”
Set an alarm. Tap Alarm, then tap
. Set the time and other options. To give the alarm a
name (like “Water the plants”) tap the label option.
Change an alarm. Tap Edit, then tap the alarm.
Delete an alarm. Swipe left on the alarm, then tap Delete.
Set a bedtime schedule. Tap Bedtime, then follow the instructions to set your sleep
reminder and wake-up alarm. After youʼve done the initial setup, you can slide
and
to adjust your sleep and wake times. Tap Options to set the alarm days, wake-up sound,
and volume. To turn Bedtime reminders off, tap the Bedtime switch.
Fall asleep to music or a podcast. Tap Timer and set a duration of time. Then tap
and
choose Stop Playing at the bottom.
Track time with the timer or stopwatch
In the Clock app, you can count down from a specified time with the timer or measure the
duration of an event with the stopwatch.
Ask Siri. Say something like:
“Set the timer for 3 minutes”
“Stop the timer”
Set the timer. Tap Timer, then set the duration of time and a sound to play when the
timer ends.
Tip: To quickly access the timer, open Control Center, then tap
. You can access
Timer from Control Center even when iPad is locked.
Measure the duration of an event and track lap times. Tap Stopwatch, then tap Start.
Tap Lap to record a lap or split. The timing continues even if you return to the Home
screen, open other apps, or press the Sleep/Wake button. Tap Stop to record the final
time. When you finish, tap Reset to clear the stopwatch.
Switch between digital and analog stopwatch faces. Swipe the stopwatch.
Maps
Find places
Use the Maps app to get directions, find and explore new places, and more.
Move around Maps by dragging the screen. To face a different direction, rotate with two
fingers. To return to north, tap the compass
Ask Siri. Say something like:
“Find coffee near me”
“Show me the Golden Gate Bridge”
WARNING: For important information about navigation and avoiding distractions that
could lead to dangerous situations, see Important safety information.
Zoom in or out. Either pinch open or closed on the map, or double-tap and hold the map,
then drag up to zoom in or down to zoom out. The scale appears at the top of the screen
while youʼre zooming. To change how distance is shown (in miles or kilometers), go to
Settings > Maps.
Find nearby attractions, services, and more. Tap the search field, tap a category such
as Food or Shopping, then tap a result. (For availability, see the iOS Feature Availability
website.)
Search for a location. Tap the search field. You can search for a location in different
ways. For example:
Intersection (“8th and Market”)
Area (“Greenwich Village”)
Landmark (“Guggenheim”)
Zip code
Business (“movies,” “restaurants San Francisco CA,” “Apple Inc New York”)
Maps may also list recent locations, searches, or directions that you can choose from.
Change the search area. Zoom in or out, or drag the screen to another area, then tap
Search Here.
Get info about a location. Tap a location, then swipe up to view all of the information
about it, or tap
to close the info display.
Use indoor maps to find your way around an airport or shopping mall. Go to the
location, then tap Look Inside. Tap a category (like Food, Restrooms, or Clothes) on the
left, then tap a result. Swipe up to see all results, listed alphabetically. To see a map of a
different floor, tap the Floor Level button below
. Zoom in if you donʼt see the Floor
Level button.
Add a favorite location. Tap a location, then tap
Book a table and more. If youʼve installed apps that have map extensions, you may be
able to do things like make a reservation at a restaurant. Visit the App Store to find apps
that work with Maps.
Choose your view. Tap
, then choose Map, Transit, or Satellite.
If transit information is unavailable, tap View Routing Apps to use an app for public or
other modes of transportation.
Mark a location. Touch and hold the map until a marker appears.
Share a location
Tap a marker to display its info, then tap
and choose an option such as Mail or AirDrop.
See Share from apps.
Get traffic and other info
Find out about traffic conditions. From Map or Satellite view, tap
, then turn on
Traffic. Orange shows slowdowns, and red shows stop-and-go traffic. To see an incident
report, tap an incident marker.
Get info about a location. Tap a location to display its information. Info might include
Yelp reviews, a phone number, a webpage link, and more.
Find out about the weather. Zoom in until the weather icon, which shows current
conditions for that area, appears in the lower-right corner.
Help improve Maps. To report an incorrect label, a missing location, or other issue, tap
, then tap Report an Issue.
Get directions
Note: To get directions, iPad must be connected to the Internet. To get directions
involving your current location, Location Services must also be on. (See also Location
Services.)
Ask Siri. Say something like:
“Give me directions home”
“Transit directions to my dadʼs work”
“Whatʼs my ETA?”
“Find a gas station”
Find a route to a location. Tap a location to display its info, then tap Directions.
Directions are from your current location. To get other directions, tap My Location, then
enter a different location.
Choose a different route: If multiple routes appear, tap the one you want to take.
See a driving, walking, or transit route: Tap Drive, Walk, or Transit.
See detailed directions: Tap Go.
In select cities, Maps provides public transportation information and multi-modal routing,
from walking to a bus stop or train station to hopping off at your destination.
If transit route information is unavailable, tap View Routing Apps to use an app for other
modes of transportation.
Mark a transit stop as a favorite. When viewing detailed route directions, tap a transit
stop or station, then tap
on the location card. To add the transit line to the Maps
Transit widget in Today View, where you can quickly check the lineʼs operating status, tap
Add Line when asked.
Choose a transit time or date. Find a transit route, tap Leaving Soon to select a time or
date for departure or arrival. Tap Transit Options to choose which transit vehicles to
consider.
Share a route. Find a route, tap Share, then choose an option like Mail or AirDrop. See
Share from apps.
Hear turn-by-turn driving directions (Wi-Fi + Cellular models). Find a drive route,
then tap Go.
Maps follows your progress and speaks turn-by-turn directions to your destination. If
iPad auto-locks, Maps stays onscreen and continues to announce directions.
See the route overview: Tap the turn directions at the top of the screen. To change
the map orientation so that the destination, instead of north, shows at the top, tap the
map, then tap the compass in the top-right corner of the screen. To return to turn-byturn directions, tap the turn direction in the top-left corner of the screen.
View directions as a list: Tap the route card at the bottom of the screen, then tap
Details.
Even if you open another app, Maps continues to give you turn-by-turn directions. To
return to Maps, tap the banner across the top of the screen.
View turn-by-turn or stop-by-stop directions. Find a walk, transit, or (on Wi-Fi-only
models) drive route, tap Go, then swipe each instruction left.
See the route overview: Tap the route card at the bottom of the screen, then tap
Overview. To zoom in, tap the route card, then tap Turn-by-turn (for drive and walk
directions) or Zoom In (for transit directions).
View directions as a list: Tap the route card at the bottom of the screen, then tap
Details.
Stop turn-by-turn directions. Tap End.
Ask Siri. Say something like: “Stop navigating.”
Make a quick detour. To add a stop along your route, tap the route card, then tap one of
the suggested services, such as gas stations. Tap Go to add one to your route.
Use Maps on your Mac to get directions. Open Maps on your Mac (OS X 10.9 or later),
get directions for your trip, then choose File > Share > Send to [your device]. Your Mac
and iPad must both be set up with iCloud to use the same Apple ID.
You can also use Handoff to send directions from iPad to Mac. See Handoff.
Remove markers and routes
Remove a marker. Tap the marker, tap Edit Location, then tap Remove Marker.
Delete a route. Past routes are listed below the Search field. To remove one, swipe it to
the left.
3D and Flyover
With 3D and Flyover, you can see three-dimensional views of, and even fly over, many of
the worldʼs major cities.
View a 3D map. Drag two fingers up. (Zoom in for a closer look if the 3D map doesnʼt
appear.) For best effect, use the satellite view. Tap
Adjust the angle. Drag two fingers up or down.
, then tap Satellite.
See cities and landmarks from above with Flyover. Flyover is available for select cities
and landmarks. Tap the name of a city (in Map or Satellite view) or tap the name of a
landmark, then tap Flyover in the banner (Flyover Tour on iPad mini). To return to the
map, tap
On supported models, view a city or landmark from above:
Change viewing direction: Point or tilt iPad in the direction you want to view.
Move around: Drag a finger in any direction. To rotate perspective, touch and hold the
screen with one finger, then continue holding it in place while you drag another finger
around it.
Watch an aerial 3D tour: Tap Start Tour or Start City Tour in the card at the bottom of
the screen. (If you donʼt see the card, tap anywhere on the screen.)
Flyover cities are indicated by
next to their names in Map view. If you donʼt see
markers, zoom out, or if youʼre using Transit or Satellite view, tap
, then choose Map.
Flyover locations are identified by the Flyover button in their banners.
Home
Home overview
Home provides a secure way to control and automate HomeKit-enabled accessories,
such as lights, locks, thermostats, window shades, smart plugs, cameras, and more. With
Home, you can control any “Works with Apple HomeKit” accessory using iPad.
After you set up your home and its rooms, you can control accessories individually, or use
scenes to control multiple accessories with one command. For example, you might create
a scene called “going to bed” that turns off the lights around the house, dims the lights in
the room “master bedroom” to 30 percent, then locks the front door and lowers the
thermostat.
If you have an Apple TV (4th generation or later), HomePod, or iPad (with iOS 10.3 or
later) that you leave at home, you can schedule scenes to run automatically at certain
times, or when you activate a particular accessory (for example, when you unlock the
front door). This also allows you, and others you invite, to securely control your home
while youʼre away.
Add and control accessories
The first time you open the Home app, the setup assistant helps you create a home,
where you can add accessories and define rooms. If you already created a home using
another HomeKit-enabled app, youʼll skip this step.
Add an accessory to your home. To add an accessory to Home, make sure the
accessory is turned on, tap
, tap Add Accessory, then follow the onscreen instructions.
You may need to scan or enter an 8-digit HomeKit setup code found on the accessory
itself (or its box or documentation). You can assign the accessory to a room, as well as
give it a name. The name defines how itʼs shown in the Home app, and also how you
control it using Siri.
Control an accessory. Tap an accessoryʼs button to quickly turn it on or off, or touch and
hold the button until controls appear. The available controls depend on the type of
accessory it is. For example, with some lightbulbs, you can change colors. You can also
control accessories using Control Center.
Change HomePod settings with the Home app.
Touch and hold the HomePod button, then tap Alarms to see the alarms youʼve
created.
Touch and hold the HomePod button, tap Details, then configure the HomePod
settings—for example, assign HomePod to a different room, rename HomePod, or
turn on accessibility features.
Assign an accessory to a room. Tap Rooms, tap
, then choose the room the
accessory is currently assigned to. (If itʼs not already assigned, look in Default Room.)
Touch and hold the accessoryʼs button until its controls appear, then tap Details. Tap
Location to assign it to a room.
Rename or edit an accessory. Touch and hold the accessoryʼs button until its controls
appear, then tap Details.
Edit a room. Tap
, tap Room Settings, then choose the room to edit. You can change
the roomʼs name, wallpaper, or delete the room.
Make an accessory a favorite. Touch and hold an accessoryʼs button until its controls
appear, then tap Details. Then turn on “Included in Favorites.” You can access your
favorite accessories from the Home tab.
Change an accessoryʼs icon. Touch and hold an accessoryʼs button until its controls
appear, then tap Details. Tap the icon (next to its name) to select a new icon. Not all icons
can be changed, but you can change them for lighting accessories, for example.
Rearrange your favorites. Tap Edit, then drag the buttons into the arrangement you
want.
Add more homes. Tap
, then tap Add Home. After you add another home, tap
choose the one you want to view or control.
to
Create and use scenes
Scenes allow you to control multiple accessories at once. For example, you might define
a “Reading” scene that adjusts the lights, closes the drapes, and adjusts the thermostat.
Home has some typical scenes already defined for you, but youʼll need to edit them
before theyʼll work.
Create a scene. Tap
, enter a name for the scene (such as “Dinner Party” or
“Watching TV”), then tap Add Accessories. Select the accessories you want this scene to
control, then tap Done. Next, set each accessory to change it to the state you want it to
be when the scene is run. For example, you can set up a scene that turns on lights in the
bedroom, and turns off the kitchen lights, when youʼre going to bed.
Run a scene. Tap a scene to run it. If you donʼt see the scene you want to run, look in a
different room.
Change a scene. Touch and hold a scene, then tap Details.
Make a scene a favorite. Touch and hold a scene, tap Details, then tap Show in
Favorites. Favorite scenes appear on the Home tab and are handy for scenes that arenʼt
automated.
Control your home using Siri
You can use Siri to control your accessories and scenes. Here are some of the things you
might be able to say to Siri, depending on your accessories, how youʼve named them, and
the scenes youʼve created:
“Turn off the lights” or “Turn on the lights”
“Dim the lights” or “Set brightness to 55%”
“Is the hallway light on?”
“Set the temperature to 68 degrees”
“Did I lock the front door?”
“Close the garage door”
“Show me the entryway camera”
“What is the air quality indoors?”
If you set up rooms, scenes, or more than one home, you can say things like:
“Iʼm home” or “Iʼm leaving”
“Turn down the kitchen lights”
“Turn on the fan in the office”
“Set my reading scene”
“Turn off the lights in the Chicago house”
Automations and remote access
If you have an Apple TV (4th generation or later) or HomePod, or if you set up an iPad
(with iOS 10.3 or later) that you leave at home, you can use automations and remote
access. Automations can run scenes automatically based on the time of day, your
location, a sensor being activated, or the action of an accessory. The Apple TV,
HomePod, or iPad acts as a home hub, which also allows remote access to your
accessories. Apple TV 3rd generation can also provide remote access, but doesʼt support
creating or editing automations using the Home app.
Use iPad for automations and remote access. Go to Settings > Home, then turn on
“Use this iPad as a Home Hub.” When iPad is in your home, it will run your Home
automations even when your iPhone or iPod touch is not present.
If you have an Apple TV and youʼre signed in using the same Apple ID as your iPad, it will
be paired automatically and enabled for automation.
Create an automation. Tap the Automation tab, tap Create New Automation, then
choose one of the automation triggers described below.
When arriving or leaving a location. Tap People Arrive or People Leave, then set a
geofence and specify if you want the trigger to occur when you arrive or leave the
location. You can also set this automation to only occur after sunset, which is useful for
turning on lights only when theyʼre needed.
At a time of day. Tap A Time of Day Occurs, then choose when you want this automation
to run. If you choose Sunset or Sunrise, the time will vary as the season changes.
When an accessory changes. Tap An Accessory is Controlled, select an accessory, then
tap Next and follow the onscreen instructions. You might use this, for example, to run a
scene when you unlock the front door.
A sensor detects something. Tap A Sensor Detects Something, select an accessory,
then tap Next and follow the onscreen instructions. You might use this, for example, to
turn on lights in a stairway when motion is detected nearby.
Disable an automation. In the Automations tab, tap the automation, then turn off Enable
This Automation.
Share control with others
You can invite others to control the accessories in your home. The people you invite need
to have iCloud set up. If you have an Apple TV (4th generation or later) or HomePod, or if
you configured an iPad (with iOS 10.3 or later) to be used as a home hub, additional
controls are available that let you set what guests are able to do.
Give others control. Tap
, tap Home Settings, tap a home, tap Invite, then choose
people from your contacts list or enter their email addresses.
TV
Discover movies, shows, sports, and news
Use the Apple TV App to discover and watch movies, TV shows, live sports, and news
from your supported apps in one place. You can continue watching content you
purchased or rented from the iTunes Store, or you can go to the next episode in a TV
series, even if you started playing on another iOS device or on Apple TV. (The Apple TV
App isnʼt available in all regions.)
WARNING: For important information about avoiding hearing loss, see Important safety
information.
Use single sign-on to authenticate your cable or satellite subscription credentials.
Sign in when you first open the Apple TV App, or go to Settings > TV Provider. Single
sign-on provides immediate access to all the supported video apps in your subscription
package. (If you donʼt see your TV provider, sign in directly from the app you want to
use.)
Discover content. Tap Watch Now, then browse through the available content.
Explore movies and TV shows: Browse What to Watch. Tap a title to see the details
screen, which may include trailers, reviews, cast information, and more.
Watch live news: (not available in all regions) Scroll down to the News section, then
choose a news channel.
Browse by category: Scroll down, then tap a category such as Kids.
Explore sports. (not available in all regions) Tap Watch Now, scroll down to the Sports
section, then browse the live and upcoming games. To explore more sports, tap the
Sports tab:
Browse by sport: Browse games for many sports, such as football, baseball, and
basketball. To narrow your browsing, scroll down, then choose a sport.
Choose your favorite teams: Scroll to the bottom, then tap Pick Your Favorite Teams.
Their games automatically appear in Up Next, and youʼll receive notifications.
Hide the scores of live games: Go to Settings > TV, then turn off Show Sports Scores.
Search for specific content. Tap Search, then enter a title, sport, team, cast, or crew
member in the search field.
Play content. Tap a title to see the details screen, where you can:
Watch with the suggested video app: Tap
Buy or rent from the iTunes Store: (not available for all titles) Tap Buy or Rent. Or tap
, then tap Open in iTunes. For more information, see Purchase, rent, or redeem.
Choose a different video app: If the content is available from multiple providers, tap
to choose a provider.
See whatʼs up next. Tap Watch Now, then browse the Up Next section to find:
The next episode in a TV series youʼve been watching
Live sports events, displayed with up-to-the-minute scores
Content you havenʼt finished, even if you started watching on another device where
youʼre signed in to the iTunes Store with the same Apple ID
Content youʼve recently purchased or rented from the iTunes Store
Queue content to play next. Tap the item, tap
, then tap Add to Up Next.
Remove content from Up Next. Touch and hold the item, then tap Remove from Up
Next.
Watch Homeland on Showtime®. Homeland © Twentieth Century Fox Film Corporation. All rights reserved.
SHOWTIME and related marks are registered trademarks of Showtime Networks Inc., a CBS company.
SHOWTIME is accessible for viewing solely in the United States and its territories and possessions. Minimum
high-speed broadband connection is required for viewing. Watch Big Little Lies on HBO NOW with
subscription. HBO NOW® is accessible in the U.S. and certain U.S. territories. Certain restrictions apply. ©
2017 Home Box Office, Inc. All rights reserved. HBO NOW® and related channels and service marks are the
property of Home Box Office, Inc.
Manage your library
Your library includes movies and shows you purchased or rented from the iTunes Store.
Add new movies and shows to your library. Tap Store, where you can find the latest
releases on the iTunes Store.
Browse content in your library. Tap Library. To narrow your browsing, tap Library at the
top left, tap a category—such as TV Shows or Movies, then tap Sort by Genre.
Play a movie or show. Tap a title to see the details screen, where you can:
Stream the content if iPad is connected to the Internet: Tap
Download the content so you can watch it later when iPad isnʼt connected to the
Internet: Tap
Remove a download. In the Library tab, tap Library at the top left, then tap Downloaded,
then navigate to the title you want to remove. Tap DOWNLOADED, then tap Remove
Download.
Control playback
This information describes playback for content purchased or rented from the
iTunes Store. Playback using third-party apps may vary.
?"*($.&?"4)*&#-(,8,#&,<&0(:*(#K"*0-?
@7#E&#&"(?3*&($&:5(/1&K,5( ?
@#9:*1&K,5( ?
!<3.&;($/#$0&($&4(&6#+<1&K:"$.(,*+(.:&+(
(:/(
D(:/(+/,A(2.0(5&,'.0,+():/3,/+(:/
<,$%?(K:($:*2/:&(2.0(-$/"<<#*A(-500+D(>:80(':"/()#*A0/(80/2#$,&&'(,-(':"(+/,A(2.0
5&,'.0,+?
!<3.&%(&%5*&)*]%&($&.$*?3(9:&+5#.%*$1&K,5(
(:/(
?(N:"($,*(,&-:(5/0--(2.0($0*20/
<"22:*(:/(0c"#8,&0*2(:*(,($:>5,2#<&0(.0,+-02(23:(2#>0-(P-%#5(2:(*0`2T(:/(2./00(2#>0-(P-%#5
2:(5/08#:"-T?
!+#7*&%5*&?30*(&%(&;377&%5*&:+$**)&($&;3%&%(&%5*&:+$**)1&K,5(
(:/(
D(:/(+:"<&0S2,5(2.0
8#+0:?(\)(':"(+:*F2(-00(2.0(-$,&#*A($:*2/:&-D(':"/(8#+0:(,&/0,+'()#2-(2.0(-$/00*(50/)0$2&'?
D97%3%#:<&/3%5&@3+%9$*&3)&@3+%9$*1&P:*(-"55:/20+(>:+0&-T(@.0*(3,2$.#*A(,(8#+0:D(5/0-2.0(B:>0(<"22:*(:/(2,5(
?(N:"/(8#+0:(-$/00*(-$,&0-(+:3*(2:(,($:/*0/(:)(':"/(+#-5&,'(-:
':"($,*(-00(2.0(B:>0(-$/00*(,*+(:50*(:2.0/(,55-?(K:(/02"/*(2:(2.0(8#+0:D(2,5(
(#*(2.0
->,&&(8#+0:(3#*+:3?(C:/(>:/0(#*):/>,2#:*D(-00(=#$2"/0(#*(=#$2"/0?
'5((:*&#&03;;*$*)%·(&7#)49#4*1&P*:2(,8,#&,<&0():/(,&&(8#+0:-T(K,5(
D(2.0*($.::-0(,
&,*A",A0()/:>(2.0(9"+#:(&#-2?
!5(/&:96%3%7*:&($&+7(:*0&+#.%3():1&P*:2(,8,#&,<&0():/(,&&(8#+0:-T(K,5(
!**&:96%3%7*:&#)0&+7(:*0&+#.%3():&;($&%5*&0*#;&#)0&5#$0&(;&5*#$3)41&E:(2:(4022#*A-(d
E0*0/,&(d(9$$0--#<#'(d(4"<2#2&0-(k(O,52#:*#*AD(2.0*(2"/*(:*(O&:-0+(O,52#:*-(f(4]B?(K:
$"-2:>#I0(2.0(,550,/,*$0(:)(-"<2#2&0-(,*+($&:-0+($,52#:*-D(2,5(42'&0?
'5((:*&.7#E6#+<&U9#73%E1&E:(2:(4022#*A-(d(K6(d(#K"*0-(6#+0:-?
On Wi-Fi models: Tap Playback Quality, then choose Best Available or Good.
On Wi-Fi + Cellular models: Below Playback Quality, tap Wi-Fi or Cellular, then choose
Best Available or Good.
Note: High-quality playback requires a faster Internet connection and uses more data.
Stop playing a video automatically. If you often fall asleep while watching a video, you
can have the video stop playing after a set amount of time. Open the Clock app and tap
Timer, then set the number of hours and minutes. Tap the alert tone, choose Stop
Playing, tap Set, then tap Start.
Watch on your Apple TV.
Open the Apple TV App on Apple TV: The Watch Now section includes the shows and
movies youʼve been watching. You must be signed in with the same Apple ID on iPad
and Apple TV.
AirPlay to Apple TV: Start playing the video on iPad, then tap
. For more
information, see Stream audio and video to other devices.
Wonder Woman TM and © DC Comics and © 2017 WBEI and RatPac-Dune Entertainment LLC. All rights
reserved.
Videos
Watch videos
Use Videos to watch movies and TV shows on iPad. In Videos, you can also purchase
movies and TV shows from the iTunes Store that can be played on your other devices
where youʼre signed in to iCloud with the same Apple ID.
Videos has been replaced by the Apple TV App in some regions.
WARNING: For important information about avoiding hearing loss, see Important safety
information.
Watch a movie or TV show. Tap the video in the list of videos.
Stream or download? If
appears on a video thumbnail, you can stream the video
over your Internet connection. Or, to download the video to iPad and watch it when youʼre
offline, tap
in the video details.
To show only the videos that are downloaded to iPad, go to Settings > Videos, then turn
off Show iTunes Purchases.
Watch other types of videos.
Music videos: Open the Music app.
Podcasts: Open the Podcasts app.
Videos you recorded with your iPad camera: Open the Photos app.
Add videos to your library
Buy or rent videos from the iTunes Store. Tap Store in the Videos app. Or open the
iTunes Store on iPad, then tap Movies or TV Shows. The iTunes Store isnʼt available in all
regions. See Find music, movies, TV shows, and more.
Transfer videos from your computer. Connect iPad, then sync videos from iTunes on
your computer. See the Apple Support article Sync your iPhone, iPad, or iPod touch with
iTunes using USB.
Stream videos from your computer. To configure video streaming from your computer
to iPad, turn on Home Sharing in iTunes on your computer. On iPad, go to Settings >
Videos, then enter the Apple ID and password you use for Home Sharing on your
computer. Open Videos on iPad, then tap Shared.
Convert a video for iPad. If you try to sync a video from iTunes on your computer to iPad
and a message says the video canʼt play on iPad, you can convert the video. Select the
video in iTunes on your computer, then choose File > Convert > Create iPad or Apple TV
Version. Then sync the converted video to iPad.
Delete a video. Tap Edit in the upper right of your collection, then tap
thumbnail. If you donʼt see the Edit button, look for
on the video
on your video thumbnails—those
videos havenʼt been downloaded to iPad, so you canʼt delete them. To delete an
individual episode of a series, tap the series, then swipe left on the episode in the
Episodes list.
Deleting a video from iPad doesnʼt delete it from the iTunes library on your computer or
from your purchased videos in iCloud. You can sync the video or download it to iPad
again later. If you donʼt want to sync a deleted video back to iPad, set iTunes to not sync
the video.
J1.0)12%E2#;P#46
?"*($.&?"4)*&#-(,8,#&,<&0(:*(#K"*0-?
@7#E&#&?30*(1&K,5( ?
@#9:*1&K,5( ?
!<3.&;($/#$0&($&4(&6#+<1&K:"$.(,*+(.:&+(
(:/(
D(:/(+/,A(2.0(5&,'.0,+():/3,/+(:/
<,$%?(K:($:*2/:&(2.0(-$/"<<#*A(-500+D(>:80(':"/()#*A0/(80/2#$,&&'(,-(':"(+/,A(2.0
5&,'.0,+?
!<3.&%(&%5*&)*]%&($&.$*?3(9:&+5#.%*$1&K,5(
(:/(
?(N:"($,*(,&-:(5/0--(2.0($0*20/
<"22:*(:/(0c"#8,&0*2(:*(,($:>5,2#<&0(.0,+-02(23:(2#>0-(P-%#5(2:(*0`2T(:/(2./00(2#>0-(P-%#5
2:(5/08#:"-T?
!+#7*&%5*&?30*(&%(&;377&%5*&:+$**)&($&;3%&%(&%5*&:+$**)1&K,5(
(:/(
D(:/(+:"<&0S2,5(2.0
8#+0:?(\)(':"(+:*F2(-00(2.0(-$,&#*A($:*2/:&-D(':"/(8#+0:(,&/0,+'()#2-(2.0(-$/00*(50/)0$2&'?
D97%3%#:<&/3%5&@3+%9$*&3)&@3+%9$*1&P:*(-"55:/20+(>:+0&-T(@.0*(3,2$.#*A(,(8#+0:D(5/0-2.0(B:>0(<"22:*(:/(2,5(
?(N:"/(8#+0:(-$/00*(-$,&0-(+:3*(2:(,($:/*0/(:)(':"/(+#-5&,'(-:
':"($,*(-00(2.0(B:>0(-$/00*(,*+(:50*(:2.0/(,55-?(K:(/02"/*(2:(2.0(8#+0:D(2,5(
(#*(2.0
->,&&(8#+0:(3#*+:3?(C:/(>:/0(#*):/>,2#:*D(-00(=#$2"/0(#*(=#$2"/0?
'5((:*&#&03;;*$*)%·(&7#)49#4*1&P*:2(,8,#&,<&0():/(,&&(8#+0:-T(K,5(
D(2.0*($.::-0(,
&,*A",A0()/:>(2.0(9"+#:(&#-2?
!5(/&:96%3%7*:&($&+7(:*0&+#.%3():1&P*:2(,8,#&,<&0():/(,&&(8#+0:-T(K,5(
See subtitles and closed captions for the deaf and hard of hearing. Go to Settings >
General > Accessibility > Subtitles & Captioning, then turn on Closed Captions + SDH. To
customize the appearance of subtitles and closed captions, tap Style and choose an
option.
Choose playback quality. Go to Settings > Videos.
On Wi-Fi models: Tap Playback Quality, then choose Best Available or Good.
On Wi-Fi + Cellular models: Below Playback Quality, tap Wi-Fi or Cellular, then choose
Best Available or Good.
Note: High-quality playback requires a faster Internet connection and uses more data.
Choose where to resume playback. Go to Settings > Videos, tap Start Playing, then
choose From Beginning or Where Left Off.
Stop playing a video automatically. If you often fall asleep while watching a video, you
can have the video stop playing after a set amount of time. Open the Clock app and tap
Timer, then set the number of hours and minutes. Tap When Timer Ends and choose Stop
Playing, tap Set, then tap Start.
Stream to Apple TV with AirPlay. Start playing the video on iPad, then tap
. For more
information, see Stream audio and video to other devices.
Wonder Woman TM and © DC Comics and © 2017 WBEI and RatPac-Dune Entertainment LLC. All rights
reserved.
Notes
Take notes
Use Notes to jot down important information, sketch ideas, and keep things organized.
You can add attachments—like photos, scanned documents, web links, and maps—to a
note, and you can lock a note to keep it private. You can also share a note so others can
view and edit it.
Store your notes securely in iCloud. Go to Settings > [your name] > iCloud, then turn
on Notes. Your iCloud notes—and any changes you make to them—appear on all your iOS
devices and Mac computers where youʼre signed in to iCloud with the same Apple ID.
Note: If youʼve been using an earlier version of Notes, you may need to upgrade your
iCloud notes to use all the features—sketching, checklists, paragraph styles, password
protection, adding people, and more. See the Upgrade your notes website.
Store certain notes only on your iPad. Go to Settings > Notes, then turn on “On My
iPad” Account. Notes in this account appear only on your iPad. Your notes in iCloud wonʼt
be affected.
Create a new note. Tap
. The first line of the note becomes the noteʼs title.
Ask Siri. Say something like: “Create a new note.”
Tip: You can quickly create a note or resume work on your last note by tapping the
Lock screen with Apple Pencil (on supported models). On other iPad models, you can do
this if you add the Notes control to Control Center. To change the Lock screen behavior,
go to Settings > Notes > Access Note from Lock Screen.
Make the note fill the screen. While viewing a note in landscape orientation, tap
or
turn iPad to portrait orientation.
Tip: Turn iPad Pro (12.9-inch) to landscape orientation, then tap
to see your
accounts, notes list, and selected note all at once.
Set the default account for adding or editing notes using Siri or Today View. Go to
Settings > Notes > Default Account.
Tip: If you add the Notes widget to Today View, you can create and view Notes right
from there. In Today View, tap Edit at the bottom.
Delete a note. In a note, tap
. Or in the notes list, swipe left on the note.
If you change your mind, open the Recently Deleted folder. Tap the note you want to
keep, tap in the note, then tap Recover.
Format notes and add attachments
Format text and add tables, lists, scanned documents, photos, videos, and sketches.
Change the text style. Tap
, then select the style.
Set a default formatting style for the first paragraph. Go to Settings > Notes, then tap
New Notes Start With. Choose Title, Heading, or Body.
Start a checklist. Tap
format, tap
, then enter the first item in the list. To remove the checklist
again.
Add a photo or video to your note. Tap
. Take a new photo or video, or tap Photo
Library to select and add existing photos and videos.
If you want photos or videos you take in Notes to be automatically added to the Photos
app, go to Settings > Notes, then turn on Save to Photos.
Add info from another app. When youʼre in another app and find something that you
want to add to Notes (like a location in Maps, a webpage in Safari, or a PDF in Files), tap
Share or
, then tap Add to Notes. You can create a new note or add the attachment to
an existing one.
Mark up an image or PDF. Tap the image or PDF in your note, then tap
. See Use
Markup.
Change the preview size of attachments. Touch and hold an image, sketch, or PDF
attachment in a note, then choose a size for the preview.
Write a note by hand
Use the handwriting tools to quickly write or draw with your fingertip or Apple Pencil (on
supported models).
Create a handwritten note or drawing. In a note, tap
, then start writing or drawing
with your finger or Apple Pencil. Change to a different tool by tapping it. Tap the color
tool to choose a different color. See Use Markup.
Tip: To insert a drawing within existing text, touch and hold within the text until a
magnifying glass appears, drag to position the insertion point where you want it, then tap
Insert Drawing. Or touch and hold with Apple Pencil (on supported models), then lift at
the insertion point.
Erase a mistake. Tap
to undo your last stroke. Tap the eraser to delete any element in
the drawing.
Stop drawing. Tap
to dismiss the handwriting tools. To add more to your note, type
on the keyboard or add attachments.
Resume drawing. Tap
Show lines or grids. In a note, tap
, tap Lines & Grids, then choose a line or grid style
for the note. To set the default line or grid style for new notes, go to Settings > Notes >
Lines & Grids.
Edit the suggested note title. (not available in all languages) If your note starts with
handwritten text, scroll to the top of the note to reveal the suggested title, then tap Edit.
Search for typed and handwritten text within a note. Tap
, tap Find in Note, then
type the text youʼre looking for in the search field.
Search for typed and handwritten text in all your notes. Scroll to the top of the notes
list to reveal the search field, then enter the text youʼre looking for.
Note: The ability to search for handwritten isn't available in all languages.
Create a detailed sketch
Although you can create a drawing directly in a note using the handwriting tools,
sometimes you may need a detailed sketch to help you capture an idea or plan. In
sketching mode, which provides a ruler and additional colors, you can enlarge the
drawing for more precise control.
Start a sketch using the pencil, marker, or pen tool. Switch to the eraser if you make a
mistake. On supported models, you can sketch with Apple Pencil.
Sketch in your note. Tap
, tap Add Sketch, use your finger or Apple Pencil to sketch,
then tap Done. To edit the sketch, tap it.
View more color choices. Swipe the palette left or right to see more colors.
Draw straight lines. Tap the ruler tool to make the ruler appear on your canvas, then
draw a line along the edge of the ruler. Tap the ruler tool again to make it disappear.
Move the ruler without changing its angle. Drag the ruler with one finger.
Adjust the angle of the ruler. Touch and hold the ruler with two fingers, then rotate your
fingers.
Mask a part of your sketch. Place the ruler along the edge of the area you want to
cover, then start your sketch. Draw lines that start away from the rulerʼs edge, then come
toward it.
Hide the toolbar. Swipe the toolbar down to hide it and see just the tool youʼre using.
Tap the tool youʼre using to see the toolbar again.
Zoom in. Pinch open so you can sketch the details. To zoom back out, pinch closed.
Tip: To navigate when youʼre zoomed in, drag with two fingers.
Add another sketch to your note. Tap
. Or on your last sketch, swipe left with two
fingers.
Scroll through all your sketches in a note. Swipe a sketch left or right with two fingers.
Start over. Tap Erase All.
Edit a sketch. Open the note that contains the sketch, then tap the sketch.
Add a table
You can organize information into a simple table.
Create a table. Tap
. Tap a cell to enter text, then tap Next or the press Tab to move to
the next cell. If you reach the last cell and tap Next, a new row is automatically added.
Add or delete a row or column. Tap a row or column handle, then choose to add or
delete. Column widths automatically adjust to fit the text. To see more columns, scroll the
table left or right.
Reorder a row or column. Touch and hold a row or column handle, then drag it to a new
position.
Convert the table to text. Tap a cell in the table, tap
, then tap Convert to Text.
Scan a document
You can use the camera to scan documents into Notes, then add markup or signatures.
Scan documents. Tap
, then choose Scan Documents. When you position iPad so that
the document page appears on the screen, iPad automatically captures the page.
Continue to scan more pages or tap Save when youʼre done.
Tip: To manually capture a page, tap
. Tap Keep Scan to save the page or tap
Retake to try again.
Turn the flash on or off. Tap
Apply a filter. Tap
, then choose to scan the page as a color, grayscale, or black and
white document, or as a photo.
Manually adjust a scan. Before you save a scan, you can tap the thumbnail to show
tools to adjust the crop, rotation, or filter of the scan. After you save the scan, you can
tap the scanned document in the note to make adjustments or capture more pages.
Mark up a saved scan. Tap the scanned document, tap
signature, tap
, then tap Signature. See Use Markup.
, then tap
. To add your
Organize your notes
Search for a note. Scroll to the top of the notes list to reveal the search field, then enter
the text youʼre looking for. If a note is locked, only its title appears in the search results.
Ask Siri. Say something like: “Show notes from today.”
Pin an important note. To keep a note at the top of the notes list, swipe right on the note
in the list, then tap the pin. Your pinned notes show up on all your Apple devices where
youʼre signed in to iCloud using the same Apple ID.
Sort your notes. Go to Settings > Notes > Sort Notes By, then choose Date Edited, Date
Created, or Title.
Search for a specific attachment. Tap
in the lower-left corner of the notes list to see
thumbnails of sketches, photos, links, documents, and other attachments. (Attachments
in locked notes arenʼt shown.) To go to a note with a specific attachment, tap the
attachment thumbnail, then tap Show in Note.
Create a folder to organize your Notes. From the notes list, tap
to view your folders.
Tap New Folder (at the bottom of the folders list), then name your folder.
Delete a folder. From the notes list, tap
to view your folders. Swipe a folder left, then
tap Delete.
Print a note. Tap
at the top of the note, then tap Print. For more information about
printing, see AirPrint.
View and edit notes from other accounts (such as Google, Yahoo!, or AOL). Go to
Settings > Accounts & Passwords > Add Account, then choose an account. These notes
appear in Notes on all your other iOS devices and Mac computers where youʼre also
signed in to that account.
Many Notes features arenʼt available in these third-party accounts.
Move a note to a different folder or account. In the notes list, swipe left on the note,
tap
, then choose the folder or account.
To move several notes from one folder or account to another, tap Edit in the upper-right
corner of the notes list, tap the notes you want to move, then tap Move To.
Share notes
You can send a copy of a note to a friend. Or, you can invite people to collaborate on a
note in your iCloud account, and everyone will see the latest changes.
Note: You canʼt collaborate on a locked note.
Send a copy of a note. In the note, tap
, then choose how to send your note. After you
send the note, your friend wonʼt see any changes you make to the note unless you send it
again.
Invite friends to collaborate on a note. Tap
, then choose how to send your
invitation.
Add people, remove them, or stop collaborating on a note. In a note with
collaborators, tap
Lock notes
Lock notes that contain sensitive information with a password or Touch ID (on supported
models). You can lock notes that you want to keep private from anyone who might use
your device. Notes uses a single password for all your locked notes, on all of your
devices.
You can view locked notes that are in your iCloud account on your iOS devices with
iOS 9.3 or later and Mac computers with OS X 10.11.4 or later.
You can lock notes that include images, sketches, maps, and web attachments, but not
other types of attachments like video, PDFs, and iWork documents. You canʼt lock notes
that youʼve shared.
Set or change your notes password. Go to Settings > Notes > Password. This password
applies to all your locked notes.
Set Touch ID to unlock your notes. Go to Settings > Notes > Password, then turn on
Use Touch ID.
Add a lock to a note. In the note, tap
, then tap Lock Note.
When a note is locked, the title remains visible in the notes list.
Unlock your notes. Tap a locked note, tap View Note, then follow the instructions.
Unlocking one note unlocks all of your notes until one of the following happens: your
session times out, you tap the lock icon at the top of the screen, you tap Lock Now at the
bottom of the notes list, or you lock your iPad.
Remove a lock from a note. Tap
, then tap Remove Lock.
Forgot your notes password? Go to Settings > Notes > Password, then tap Reset
Password. The new password applies to notes you lock from now on. Notes that already
have a password arenʼt affected.
Import notes from another app to Notes
Import notes from another app. (Upgraded notes only) Export the notes from a
supported app. Then, with an Evernote file for example, touch and hold the exported file
attachment (it has a .enex filename extension) in Mail, then choose Add to Notes. After
you import notes, you can find them in the Imported Notes folder.
For more information, see the Apple Support article Import your notes and files to the
Notes app.
Reminders
Reminder lists
With Reminders you can keep track of all the things you need to do.
Add a reminder. Tap a list, then tap a blank line.
Share a list using iCloud. Tap a list, then tap Edit. Tap Sharing, then tap Add person.
Anyone you share with also needs to be an iCloud user. Those who accept the invitation
can add, delete, and mark items as completed. Family members can also share a list. See
Family Sharing.
Ask Siri. Say something like:
“Remember to take an umbrella”
“Add artichokes to my groceries list”
“Read my work to-do list”
“Remind me to call my mom at 5”
Delete a list. While viewing a list, tap Edit, then tap Delete List.
Set a default list for new reminders. Go to Settings > Reminders.
Delete a reminder. Swipe the reminder left, then tap Delete.
Change the order of lists or reminders. Tap Edit, then touch
and move the item.
Search for a reminder. In the search field, enter the name of the reminder youʼre looking
for.
Keep your reminders up to date on other devices. Go to Settings > [your name] >
iCloud, then turn on Reminders. Some other types of accounts, such as Exchange, also
support Reminders. You can change how reminders in the past are synced in Settings >
Reminders.
With OS X 10.10 or later, you can hand off reminders youʼre editing between your Mac
and iPad. See Handoff.
Scheduled reminders
Scheduled reminders notify you when theyʼre due.
Ask Siri. Say something like: “Remind me to take my medicine at 6 a.m. tomorrow.”
Schedule a reminder. Swipe a reminder to the left, tap More, then turn on “Remind me
on a day.” Tap Alarm to set the date and time. Tap Repeat to schedule the reminder for
regularly occurring intervals.
Donʼt bother me now. You can turn off Reminders notifications in Settings >
Notifications. To silence notifications temporarily, turn on Do Not Disturb.
Location-based reminders
On iPad Wi-Fi + Cellular models, Reminders can alert you when you arrive at or leave a
location.
Be reminded when you arrive at or leave a location. Swipe a reminder to the left, tap
More, then turn on “Remind me at a location.” Tap Location, then choose a location from
the list or enter an address. After you define a location, you can drag to change the size
of the geofence on the map, which sets the approximate distance at which you want
reminded. You canʼt save a location reminder in Outlook or Microsoft Exchange accounts.
Ask Siri. Say something like: “Remind me to stop at the grocery store when I leave
here.”
Add common locations to your My Info card. When you set a location reminder,
locations in the list include addresses from your My Info card in Contacts. Add your work,
home, and other favorite addresses to your card for easy access in Reminders.
News
Get started with News
News collects all the stories you want to read, from your favorite sources, about the
topics that interest you most. To personalize News, you can choose from a selection of
publications (called channels in News) and topics such as Entertainment, Food, and
Science. For You collects the best stories from the channels and topics you follow. The
more you read, the better News understands your interests. Siri learns whatʼs important
to you and suggests stories you might like. You can also receive notifications about
important stories from channels you follow.
Note: You need a Wi-Fi or cellular connection to read News. News isnʼt available in all
regions.
Personalize your news. When you open News and follow only a few channels or topics,
a “Personalize your News” message appears at the top of For You and Following. Tap
Browse Channels and Topics, then tap the channels and topics you want to follow. At any
time, you can search for specific channels or topics in the Search tab or discover more
channels and topics to follow by tapping the Browse button in the Following tab.
Note: Visit the Following tab to see a list of all of Siriʼs suggestions. If Siri has nothing to
suggest, you donʼt see a Suggestions section in Following.
Follow or block topics or channels. When you follow a topic or channel, related stories
appear more often in For You and the topic or channel appears in Following. When you
block a topic or channel, its stories wonʼt appear in For You and the topic or channel
appears among the blocked topics and channels in Following.
Follow or block topics or channels in a feed: Tap
Follow or block suggested topics or channels: Tap
or
at the top of the screen.
or
next to a topic or channel
in For You.
Add notifications. Some channels you follow may send notifications about important
stories. To receive notifications, tap Following, then tap
next to a channel.
See stories only from the channels you follow. Go to Settings > News, then turn on
Restrict Stories in For You.
Note: Restricting stories significantly limits the variety of stories that appear in For You.
When you restrict stories, you wonʼt see Top Stories, Trending Stories, and Featured
Stories.
H++*::&J*/:&:%($3*:&#)0&?30*(:&;$("&>(0#E&83*/1&C/:>(2.0(&0)2(0+A0(:)(2.0(B:>0
-$/00*(:/(^:$%(-$/00*D(-3#50(/#A.2(2:(:50*(K:+,'(6#03?(\*(2.0(;03-(-0$2#:*D(2,5(,(-2:/'
.0,+&#*0(2:(:50*(2.0(-2:/'(#*(;03-?
K,5(2.0(8#+0:-(-0$2#:*(#*(2.0(;03-(3#+A02(2:(8#03(2.0()#/-2(,8,#&,<&0(8#+0:D(3.0/0(':"
$,*M
K,5(
(2:(2"/*(2.0(-:"*+(<,$%(:*?
K,5(2.0(/#A.2(-#+0(:)(2.0(8#+0:(2:(8#03(2.0(*0`2(8#+0:i(2,5(2.0(&0)2(-#+0(2:(8#03(2.0
5/08#:"-(8#+0:?
K,5( (2:(-.,/0(2.0(8#+0:?
K,5( (2:($&:-0(2.0(8#+0:?
>3.F&\)(':"(+:*F2(-00(2.0(8#+0:($:*2/:&-D(2,5(2.0(-$/00*?
U1)%Z1+
C:/(N:"(5/0-0*2-(2:5(-2:/#0-(-0&0$20+(<'(955&0(;03-(0+#2:/-(,*+(2.0(<0-2(-2:/#0-()/:>
2.0($.,**0&-(,*+(2:5#$-(':"():&&:3?(C:/(N:"(,&-:(#*$&"+0-(-2:/#0-(-"AA0-20+(<'(4#/#D
2/0*+#*A(-2:/#0-(2.,2(,/0(5:5"&,/(3#2.(:2.0/(;03-(/0,+0/-D(8#+0:-D(,*+(>:/0?
!%(.&:944*:%3)4&:.*+3;3+&%(.3+:&#)0&+5#))*7:&3)&L($&d(91&K,5(
(:*(,(-"AA0-20+(2:5#$
:/($.,**0&D(2.0*(2,5(42:5(4"AA0-2#*A?
I*#0&"($*&:%($3*:&/3%53)&#&4$(9.1&K,5(2.0(,//:3(,2(2.0(<:22:>(:)(2.0(A/:"5?
@7#E&#&?30*(&3)&%5*&:%($E&73:%1&K,5( ?
Get newer stories. Pull down to refresh For You with the latest stories.
Love, dislike, save, or share a story. When viewing a story, tap
, then choose Love
Story, Dislike Story, or Save, or select a sharing option. You can also report a story, open
it in Safari, and more.
To remove a dislike or love, tap
, then tap Remove Dislike from Story or Remove Love
from Story.
Read stories
Read a story. Tap a story to read it. Web stories delivered through an RSS feed show a
preview. To view an RSS story in full, swipe up. To always view the full story, go to
Settings > News, then turn off Show Story Previews.
Read the next story. Tap the arrow on the top-right of the screen. You can also swipe
left to read the next story or right to read the previous story. Swipe from the left edge to
return to the list of stories.
Tell News what stories you love and dislike. When viewing a story, tap
or
. News
takes your feedback into account for future recommendations.
Change the text size. Tap
, then tap the smaller or larger letter to change the size.
(Not available in all stories.)
Share stories. When viewing a story, tap
Message or Mail.
, then choose a sharing option such as
Report a concern. If you believe that a story youʼre viewing is mislabeled, inappropriate,
offensive, or doesnʼt display properly, tap
, then tap Report a Concern.
Spotlight
In Spotlight, Apple News editors go deep into a topic thatʼs of interest at the moment,
curating the best content from sources you can trust. Here youʼll find compelling video,
audio, photo essays, and featured stories focusing on culture, wellness, lifestyle, tech,
and more.
Read Spotlight stories. Tap Spotlight to read stories related to popular and timely topics
—award shows, sports championships, or holiday events, for example.
Note: The Spotlight tabʼs name and icon may temporarily change to reflect the topicʼs
theme.
Following
The channels and topics you follow appear in the Following screen. Following also
includes channels and topics that Siri and News suggest.
Explore suggestions. On the Following screen, tap a channel or topic under Suggestions
to browse its contents. Tap See All for more suggestions. Tap
follow it. Tap
next to a suggestion to
next to a suggestion to block it.
Browse a channelʼs stories. Tap a channel or topic to see the most recently published
stories. In some channels you can browse sections, such as Politics, Sports, and
Entertainment.
Dig deeper into a topic. Tap a topic to see recent related stories.
Stop following channels and topics. Tap Edit, tap
Follow a channel or topic. Tap
, then tap Remove.
next to a channel, topic, or search result. Or tap the
Follow button at the end of a story. To follow a trending topic, tap Search, tap a topic,
then tap
Manage notifications. Tap
to turn notifications on or off for the channels you follow
and the channels recommended by Apple News editors.
Show blocked channels and topics. Tap Blocked Channels and Topics at the bottom of
the Following screen to show the channels and topics youʼve blocked. For stories from
that channel or topic to appear again in For You, tap the channel or topic, then tap
Search
News keeps track of a wide variety of topics, which makes it easy to find the stories that
interest you.
Search for channels, topics, or stories. Tap Search, then enter the name of a channel
(CNN or WIRED, for example), a topic (fashion, business, or politics, for example), or a
story (music awards or stock markets, for example). In the results list, tap
to follow the
channel or topic.
View trending topics. Search shows trending topics to get you started. Tap a topic to
see search results for that topic, then tap
to follow the specific topic or a related topic
or channel.
Save stories
In News you can save stories to read later, online or offline.
Save a story. When viewing a list of stories or reading a story, tap
, then tap Save. To
read a saved story, tap Saved, then tap the story.
Delete a saved story. Tap Saved, then swipe a story left.
Check your reading history. Tap the History tab to see what youʼve read. Swipe a story
left to delete it.
Clear your reading history. Tap the History tab, tap Clear, then choose an option:
Tap Clear History to remove your reading history.
Tap Clear Recommendations to remove the information used to create
recommendations.
Tap Clear All to clear your News history and recommendation information.
Note: If you clear recommendations, and the Find Content in Other Apps switch is on
in Settings > News > Siri & Search, recommendations based on your Safari and app
usage and your reading habits in News are cleared. To prevent News from suggesting
stories based on your Safari and app usage, turn off Find Content in Other Apps.
Subscriptions in News
Subscribe to channels. With News you can read premium stories from select publishers.
There are three ways to access subscriptions in News:
Subscribe within News: You can purchase a subscription directly in News. In a
channel that offers subscriptions, tap the subscription button.
Access an existing subscription purchased from iTunes or the App Store: News
checks your iTunes Store account for subscriptions you bought as in-app purchases
in publishersʼ apps. If any subscriptions youʼve purchased are also available in News,
youʼre automatically granted access in News. See the About in-app purchases
website.
Access an existing subscription purchased from a publisher: If youʼve purchased a
subscription directly from a publisherʼs ecosystem, the publisher may allow you to
sign in to your account in News to access your subscription there.
To sign in, tap a story that requires a subscription to read, then tap Already a
Subscriber? Enter the user name and password for your existing subscription.
When you subscribe to a channel, itʼs automatically added to Following and stories from
the channel appear in For You.
For more information, see the About subscriptions in Apple News website.
iTunes Store
Find music, movies, TV shows, and more
Use the iTunes Store to add music, movies, TV shows, and ringtones to iPad.
Note: You need an Internet connection and an Apple ID to use the iTunes Store. The
iTunes Store isnʼt available in all regions.
Browse by category or genre. Tap a category (Music, Movies, or TV Shows). To refine
the list, tap Genres.
Ask Siri. Say something like: “Look for kidsʼ shows in iTunes.”
If you know what youʼre looking for, tap Search. You can tap a search term thatʼs
trending among other iTunes users, or enter info in the search field, then tap Search on
the keyboard.
Ask Siri to tag it. When you hear music playing around you, ask Siri “What song is
playing?” Siri tells you the name and artist of the song and gives you an easy way to
purchase it. The song is also tagged so you can preview or buy it later. To see your list of
tagged songs, tap Music, tap
, then tap Siri.
Preview a song or video. Tap it.
Add to your Wish List. To track a song you might want to buy later, add it to your Wish
List. View the song, tap
, then tap Add to Wish List. To view your Wish List, tap
, then
tap Wish List.
Purchase, rent, or redeem
Sign in with your Apple ID. If you arenʼt signed in with your Apple ID, the iTunes Store
asks you to do so before you make a purchase. To view or edit your Apple ID, go to
Settings > [your name] > iTunes & App Store, then tap your Apple ID. If you donʼt have an
Apple ID, you can create one at the time of purchase.
Buy and download an item. Tap the itemʼs price, then tap Buy. If the item is free, tap
Get.
If you see
instead of a price, youʼve already purchased the item, and you can
download it again without a charge.
Ask Siri. Say something like: “Purchase [song title] by [artist].”
View and download your previous purchases. Tap Purchased. To automatically
download items that you purchased on other Apple devices, go to Settings >
[your name] > iTunes & App Store, then turn on Automatic Downloads.
Limit downloads to Wi-Fi connections (Wi-Fi + Cellular models). To prevent
downloads from using cellular data, go to Settings > [your name] > iTunes & App Store,
then turn off Use Cellular Data.
See the progress of a download. Tap Downloads.
Rent a movie. Tap the movieʼs rental price, then tap Rent. You can stream the movie to
iPad or download the movie to play when youʼre offline. To start or continue the movie on
another iOS device (iOS 10.3 or later), Apple TV (tvOS 10.3 or later), or Mac (with iTunes
12.6 or later), make sure youʼre signed in to the iTunes Store with the same Apple ID on
each device.
When you rent a movie, you have 30 days to start watching it. After you start watching
the movie, you can play it as many times as you want for 48 hours, after which the rental
period ends. When the rental period ends, the movie is deleted.
Note: Movie rentals and streaming arenʼt available in all regions or for all movies. See the
Apple Support article What can I buy from the iTunes Store in my country or region?
Approve purchases with Family Sharing. With Family Sharing set up, the family
organizer can review and approve purchases made by family members under a certain
age. For more information, see Family Sharing.
View and download family membersʼ purchases. With Family Sharing set up, you can
view and download songs, TV shows, and movies purchased by your family members.
Tap Purchased, tap My Purchases, then choose a family member.
Hide individual purchases. Using iTunes on a computer, family members can hide any of
their purchases so other family members canʼt view or download them.
See your purchase history. To get a list of apps, songs, movies, TV shows, books, or
other items you bought with your Apple ID, go to Settings > [your name] > iTunes &
App Store. Tap your Apple ID, then tap View Apple ID; you might be asked to authenticate
your Apple ID. Scroll down, then tap Purchase History.
Send a gift. To give an item, view it, tap
, then tap Gift. To give an iTunes gift
certificate, tap a category (Music, Movies, or TV Shows), scroll to the bottom, then tap
Send Gift.
Redeem a gift card or code. Tap Music, scroll to the bottom, then tap Redeem.
Ask Siri. Say something like: “Redeem an iTunes Store gift card.”
App Store
Find apps and games
Use the App Store to find, purchase, and download apps and games.
Note: You need an Internet connection and an Apple ID to use the App Store. The
App Store isnʼt available in all regions.
Keep up with the latest. Tap Today in the lower-left corner to discover whatʼs happening
in the world of apps. The Today screen features tips and tricks, collections, exclusive
premieres, and original stories from App Store editors around the world.
Browse apps by category. Tap Apps, then scroll down to Top Categories and choose a
category—for example, Photo & Video, Entertainment, or Kids.
Browse games by category. Tap Games, then scroll down to Top Categories and choose
a category—for example, Action, Arcade, or Kids.
Find a specific app. Tap Search, enter the name in the search field, then tap Search on
the keyboard.
Ask Siri. Say something like: “Find apps by Apple.”
Tell a friend about an app. View the app in the App Store, tap
—for example, Mail or Message. See Share from apps.
, then choose an option
Purchase, redeem, and download
Sign in with your Apple ID. If you arenʼt signed in with your Apple ID, the App Store asks
you to do so before you make a purchase. To view or edit your Apple ID, go to Settings >
[your name] > iTunes & App Store, then tap your Apple ID. If you donʼt have an Apple ID,
you can create one at the time of purchase.
Buy and download an app. Tap the appʼs price, then follow the instructions. If the app is
free, tap Get.
If you see
instead of a price, youʼve already purchased the app and you can download
it again without a charge. While the app is downloading or updating, its icon appears on
the Home screen with a progress indicator.
Your app updates automatically over Wi-Fi, so you can keep up with the latest
improvements and features. (To turn off automatic updates, go to Settings >
[your name] > iTunes & App Store, then turn off Updates.)
Ask Siri. Say something like: “Purchase [app name].”
View and download your previous purchases. Tap Updates, tap your profile picture in
the upper right, then tap Purchased. To automatically download apps that you purchase
on other Apple devices, go to Settings > [your name] > iTunes & App Store, then turn on
Apps (below Automatic Downloads).
Limit downloads to Wi-Fi connections (Wi-Fi + Cellular models). To prevent
App Store downloads from using cellular data, go to Settings > [your name] > iTunes &
App Store, then turn off Use Cellular Data.
Approve purchases with Family Sharing. With Family Sharing set up, the family
organizer can review and approve purchases made by other family members under a
certain age. For more information, see Family Sharing.
View and download family membersʼ app purchases. With Family Sharing set up, you
can view and download apps purchased by your family members who choose to share
their purchases. Tap Updates, tap your profile picture in the upper right, then choose a
family member to see their purchases. (Purchases made in an app shared with Family
Sharing may not be accessible after the family member leaves the family group.)
Restrict in-app purchases. Many apps provide extra content or enhancements for a fee.
To prevent in-app purchases, go to Settings > General > Restrictions, make sure
Restrictions is enabled, then turn off In-App Purchases. You can also set other
restrictions, such as limiting app downloads by age ratings.
Give an app. View the app, tap
, then tap Gift (not available for all apps).
Give an iTunes gift certificate. Tap Updates, tap your profile picture in the upper right,
then tap Send Gift Card by Email.
Redeem a gift card or code. Tap Updates, tap your profile picture in the upper right,
then tap Redeem.
Ask Siri. Say something like: “Redeem an iTunes Store gift card.”
iBooks
Get books
Get books from the iBooks Store. In iBooks, use the buttons at the bottom of the
screen to access the iBooks Store. Tap Featured to browse the latest releases, or Top
Charts to view the most popular. To find a specific book, tap the Search field that
appears after you access the iBooks Store.
Ask Siri. Say something like:
“Find books by Jane Austen”
“Find the Odyssey in iBooks”
Read a book
Open a book. Tap My Books at the bottom of the screen, then tap the book you want to
read. If you donʼt see it in on the bookshelf, swipe left or right to see other collections.
Show the controls. Tap near the center of a page. Not all books have the same controls,
but some of the things you can do include searching, viewing the table of contents, and
bookmarking the page.
Close a book. Pinch the page, or tap .
Enlarge an image. Tap, or with some books double-tap, the image.
Read by columns. In books that support it, double-tap a column of text to zoom in, then
swipe up or to the left to move to the next column.
Go to a specific page. Use the slider at the edge of the screen or the page navigation
controls at the bottom. Or tap
, enter a page number, then tap the page number in the
search results.
Get a definition. Touch and hold a word, then tap Look Up. (Definitions arenʼt available
for all languages.)
Interact with multimedia. If a book has interactive elements, such as movies,
presentations, or 3D objects, you can interact with them by tapping, swiping, or pinching.
To view an element full screen, pinch open with two fingers; pinch closed to go back to
the page.
Bookmark a page of interest. Tap
all your bookmarks, tap
to add a bookmark; tap
again to remove it. To see
, then tap Bookmarks.
Note: You donʼt need to add a bookmark to mark your place when you close a book—
your place is saved automatically.
See your bookmarks on all your devices. Go to Settings > iBooks, then turn on Sync
Bookmarks and Notes.
Remember the good parts. You can drag and drop a text selection into another app like
Notes or Reminders. If the book is from the iBooks Store, a link to the book is included
automatically.
With some books you can add notes and highlights. To add a highlight, touch and hold a
word, then move your finger to draw the highlight. To add a note, double-tap a word to
select it, move the grab points to adjust the selection, then tap Note or Highlight.
To review your notes, tap
for books that support study notes or tap
, then tap
Notes.
Share the good parts. Select text, then tap Share. Or drag and drop a text selection or a
note to add it to a message in Messages or Mail. If the book is from the iBooks Store, a
link to the book is included automatically. (Sharing may not be available in all regions.)
Share a link to a book. Tap near the center of a page to display the controls, tap
then tap
Change the way a book looks. With some books you can change the font, font size, and
color of the page. (Tap
.) You can change justification and hyphenation in Settings >
iBooks. These settings apply to all books that support them.
Change the brightness. Tap
. If you donʼt see
, tap
first.
Dim the screen when itʼs dark. Turn on Auto-Night Theme to automatically change the
bookshelf, page color, and brightness when using iBooks in low-light conditions. (Not all
books support Auto-Night Theme.)
Use study notes and glossary terms
In books that support it, you can review all of your highlights and notes as study cards.
See all your study cards. Tap
. Search your notes, or tap a chapter to see notes you
made in that chapter. To see your notes on your other devices, go to Settings > iBooks,
then turn on Sync Bookmarks and Notes.
Delete notes. Tap Select, select some notes, then tap
Share notes. Tap Select, select some notes, then tap
. Or drag and drop notes into
another app like Messages, Mail, or Notes.
Review your notes as study cards. Tap Study Cards. Swipe to move between cards. Tap
Flip Card to see its back.
Shuffle your study cards. Tap Study Cards, tap Options, then turn on Shuffle.
Add glossary terms to your study cards. If a book includes a glossary, tap Study Cards,
tap Options, then select Glossary Terms to include those words in your study cards.
Listen to an audiobook
Open an audiobook. Audiobooks are identified by
on the cover. Tap the book you
want to listen to. If you donʼt see it in the library, swipe left or right to view other
collections.
Skip farther forward or back. Touch and hold the arrows, or slide and hold the book
cover. To change the number of seconds that skipping moves, go to Settings > iBooks.
Speed it up, or slow it down. Tap the playback speed in the lower-right corner, then
choose a different speed. 1x is normal speed, 0.75x is three-quarters speed, and so on.
Go to a chapter. Tap
, then tap a chapter. (Some books donʼt define chapter markers.)
Set a sleep timer. Before starting playback, tap
, then choose a duration.
Go to a specific time. Drag the playhead, located below the book cover. Where you
started listening during this session is marked with a small circle on the timeline. Tap the
mark to jump to that spot.
Download an audiobook previously purchased from the iBooks Store. You can
download an audiobook again from the Purchased list in the iBooks Store anytime, free of
charge.
Organize books
View books by title or cover. Tap
or
View only audiobooks or PDFs. Tap the name of the current collection (at the top of the
screen) then choose PDFs or Audiobooks.
Organize your books with collections. Tap Select, then select some books and tap
Move.
Create or edit collections. Tap the name of the current collection (at the top of the
screen). Some built-in collections, such as PDFs, canʼt be renamed or deleted. You can
sync your collections with your other devices in Settings > iBooks.
Rearrange books. While viewing books by cover, touch and hold a cover then drag it to a
new location. While viewing books by title, sort the list using the buttons at the top of the
screen. The All Books collection is automatically arranged for you; switch to another
collection if you want to manually arrange your books.
Search for a book. Pull down to reveal the Search field at the top of the screen.
Searching looks for the title and the authorʼs name.
Remove books. Tap Select, select some books, tap Delete, then choose an option.
Hide books you havenʼt downloaded. If you see
on a cover or next to a title, you can
download the book again without charge. To remove from view the books that arenʼt
downloaded, tap the name of the current collection (at the top of the screen), then turn
on Hide iCloud Books.
Cite a book in another app. Drag and drop the book from your library to add its citation
to a document in another app. In most apps, the citation for a book from the iBooks Store
includes a link to the book.
Note: When you drag and drop a PDF document from your library, the entire document—
not a citation—is copied into the app.
Read PDF documents
Add a PDF email attachment to iBooks. Open the email message, touch and hold the
PDF attachment in the message, then tap Copy to iBooks. Or, tap the PDF attachment to
open it, tap any page, tap
, then tap Copy to iBooks.
Print a PDF document. With the document open, tap
, then choose Print (you need an
AirPrint-compatible printer). For more about AirPrint, see AirPrint.
Mark up a PDF document. Tap
, then use the drawing and annotation tools. (Tap near
the center of a page if you donʼt see
.) For more information, see Use Markup.
Email a PDF document. Drag and drop the document from your library into a message.
Or, with the document open, tap
, then choose Mail.
Copy a PDF document into another app. Drag and drop the document from your library
to add it to another app, such as Notes or Reminders.
Access your entire library in iCloud
You can store your PDF files and other books in iCloud and access them on your other
devices.
Turn on iCloud for iBooks. Go to Settings > [your name] > iCloud > iCloud Drive >
iBooks.
After you turn on iCloud for iBooks, whenever you add a PDF file (or a book that doesnʼt
come from the iBooks Store) to iBooks, the document is uploaded to iCloud. The
document is also added to your other devices where youʼve turned on iCloud for iBooks
and youʼre signed in to iCloud with the same Apple ID.
To change whether to use iCloud for iBooks, go to Settings > iCloud > iCloud Drive, then
turn iBooks on or off.
Note: The books in your Purchased list in the iBooks Store donʼt count against your
available iCloud storage space.
Podcasts
Get podcasts
Use the Podcasts app to find and listen to your favorite podcasts.
Podcasts are free shows that are similar to radio or TV shows. Some podcasts are
individual episodes; some are series. You can stream a podcast over your Internet
connection, or you can download it to iPad to play when youʼre offline.
Discover podcasts. Tap Browse to see Featured podcasts or Top Charts. You can also
browse by content providers or categories.
Search for podcasts and episodes. Tap Search, then type the name of a podcast or
episode.
Ask Siri. Say something like: “Play ‘The Dailyʼ podcast.”
Subscribe to a podcast. Get new episodes as theyʼre released. Tap the podcast, then
tap Subscribe.
See your subscribed podcasts.
Podcasts with new episodes and episodes you havenʼt finished: Tap Listen Now.
All podcasts: Tap Library.
Add an episode to your library. For podcasts that you havenʼt subscribed to, tap
next
to an episode.
Play an episode. Tap the episode to start playing. If there are additional episodes, they
will automatically play in order. If the episode isnʼt downloaded, itʼs streamed to iPad. To
download the episode so you can play it when youʼre offline, tap
H:<&!3$31&4,'(-:>02.#*A(&#%0M(a=&,'(5:+$,-2-?b
I*:9"*&.7#E3)4&#)&*.3:(0*1&K,5(^#-20*(*:3?(_5#-:+0-(':"(.,80*F2()#*#-.0+(,/0(*0,/(2.0
2:5(:)(2.0(&#-2?
a**.&E(9$&.(0+#:%&:96:+$3.%3():&9.&%(&0#%*&()M&E(9$&0*?3+*:1&E:(2:(4022#*A-(d
=:+$,-2-D(2.0*(2"/*(:*(4'*$(=:+$,-2-?
J1.0)12%E2#;P#46
!5(/&%5*&.7#E6#+<&+()%$(7:1&@.#&0(5&,'#*A(,*(05#-:+0D(2,5(2.0(5&,'0/(*0,/(2.0(<:22:>
:)(2.0(-$/00*?(43#50("5(2:(-00(2.0(-&005(2#>0/(,*+(-.,/#*A(:52#:*-?(43#50(+:3*(2:(.#+0
2.0(5&,'<,$%($:*2/:&-?
@7#E1&K,5( ?
@#9:*1&K,5( ?
!<3.&Wf&:*+()0:&;($/#$0&($&6#+<&/3%53)&%5*&*.3:(0*1&K,5(,($#/$"&,/(,//:3?
!<3.&;($/#$0&($&6#+<&/3%5&4$*#%*$&#++9$#+E1&]/,A(2.0(5&,'.0,+():/3,/+(:/(<,$%?(K:
$:*2/:&(2.0(-$/"<<#*A(-500+D(>:80(':"/()#*A0/(80/2#$,&&'(,-(':"(+/,A(2.0(5&,'.0,+?
H:<&!3$31&4,'(-:>02.#*A(&#%0M
a4%#5(<,$%(GV(-0$:*+-b
a4%#5(2:(2.0(*0`2(05#-:+0b
Add the episode to the Up Next queue. Tap
, then tap Play Next or Play Later. To see
the Up Next Queue, swipe up.
Get more info about an episode. Swipe up, then tap Episode Notes.
Stream the podcast to another device. Tap
, then choose a device. For more
information, see Stream audio and video to other devices.
Manage your library
Tap Library to see your subscribed podcasts and downloaded episodes.
Search your library. In the Search tab, type the name of a podcast or episode, tap Your
Library, then tap Search.
Browse for more episodes of a podcast. Tap Library, tap the podcast, then tap
Available Episodes.
Share an episode or a podcast. Tap the episode or podcast, tap
, tap
, then choose
a sharing option.
Change the settings of a subscribed podcast. Tap the podcast, tap
, then tap
Settings. You can set options for notifications, the order in which episodes are played,
downloading episodes, and more.
Change the default download settings for all subscribed podcasts. Go to Settings >
Podcasts > Download Episodes.
Choose how frequently Podcasts checks your subscriptions for new episodes. Go to
Settings > Podcasts > Refresh Every, then choose an option.
Delete an episode. Tap Library, tap Episodes, swipe left on the episode, then tap Delete.
Remove a download. Tap Library, tap Downloaded, swipe left on an episode, then tap
Remove.
Unsubscribe from a podcast. Tap the podcast, tap
, then tap Unsubscribe.
Photo Booth
Take photos
Use Photo Booth to take photos with fun effects.
Take a photo. Aim iPad and tap the shutter button.
When you take a photo, iPad makes a shutter sound. You can use the volume buttons on
the side of iPad to control the volume of the shutter sound. See Control the volume.
Note: In some regions, sound effects are played even if the Side Switch (available on
some models) is set to silent.
Select an effect. Tap
, then tap the effect you want.
Change a distortion effect: Drag your finger across the screen.
Alter a distortion: Pinch, swipe, or rotate the image.
See recent shots. Tap the thumbnail of one of your shots. To display the controls, tap
the thumbnail again.
Switch between cameras. Tap
at the bottom of the screen.
Manage photos
The photos you take with Photo Booth are saved to the Camera Roll album or, if you use
iCloud Photo Library, in the All Photos album in the Photos app on iPad.
Delete a photo. Select a thumbnail, then tap
Share or copy a photo. Tap a thumbnail, tap
, then tap a share option or choose Copy.
View photos in the Photos app. In the Photos app, tap Photos. Or tap Albums, tap All
Photos (or Camera Roll if iCloud Photo Library is turned off), then tap a thumbnail. Swipe
left or right to see the next or previous photo. See View photos and videos.
Share photos on all your devices. If you use iCloud Photo Library, you can share your
photos with other devices (iOS 8.1 or later), Mac computers (OS X 10.10.3 or later), and
on iCloud.com. You must be signed in using the same Apple ID. See iCloud Photo Library.
Upload photos to your computer. Connect iPad to your computer using the included
USB cable.
Mac: Select the photos to upload, then click the Import or Download button in Photos
or other supported photo app on your computer.
PC: Follow the instructions that came with your photo app.
If you delete the photos from iPad when you upload them to your computer, theyʼre
removed from Photos. You can use the Photos settings pane in iTunes to sync photos to
the Photos app on iPad.
Apple Pay
Buy with Apple Pay
On supported models, use Apple Pay (not available in all regions) to make secure
payments in apps and on websites that support Apple Pay. You can also send and receive
money in Messages. Using Apple Pay can be simpler than using a physical card, and
safer too.
Not all Apple Pay features are available in all regions. For information, go to the Apple Pay
website.
Set up Apple Pay. Go to Settings > Wallet & Apple Pay, then tap Add Credit or Debit
Card. You may be asked to sign in to iCloud with your Apple ID.
Add a new card: Position iPad so that your card appears in the frame, or enter the
card details manually.
Add your previous cards: Select the card associated with your Apple ID, cards you
use with Apple Pay on your other devices, or cards that youʼve removed. Tap
Continue, then enter the CVV number of each card.
The card issuer determines whether your card is eligible for Apple Pay, and may ask you
for additional information to complete the verification process.
Pay in an app or on the web. During checkout, tap the Apple Pay or Buy with Apple Pay
button. To complete the payment, use Touch ID or your passcode.
You may receive a notification with the merchant name and the amount authorized for the
purchase. Your zip or postal code may be provided to the merchant to calculate tax and
shipping costs. Payment information—such as billing and shipping addresses, email
address, and phone number—may also be provided to the merchant after you authorize
the payment with Touch ID or a passcode.
Send and receive money (U.S. only)
Use Apple Pay to send and receive money quickly and easily in Messages. Thereʼs no app
to download, and you can use the cards you already have with Apple Pay.
When you receive money in Messages, itʼs added to your Apple Pay Cash card. You can
use Apple Pay Cash right away to make purchases using Apple Pay in stores, in apps, and
on the web. You can also transfer your Apple Pay Cash balance to your bank account.
See Set up and manage Apple Pay Cash (U.S. only).
Before you use Apple Pay Cash or send or receive payments with Apple Pay, you need to
agree to the terms and conditions of these services.
Send a payment. In an iMessage conversation, tap
, then tap
. Enter the amount,
tap Pay, then add a comment if you want.
Tip: If thereʼs an underlined monetary amount in a message, tap it to preset the
payment.
To complete the payment, tap
, then authenticate with Touch ID or enter your
passcode.
Ask Siri. Say something like, “Apple Pay 75 dollars to Aga Orlova for the zipline tour”
or “Send 75 dollars to Aga Orlova.”
The payment is made with Apple Pay Cash if your balance has sufficient funds.
Otherwise, you can choose a credit, debit, or eligible prepaid card. Credit card payments
incur a 3 percent transaction fee.
Cancel a payment. If you sent a payment that hasnʼt been accepted, tap the payment
bubble, then tap Cancel Payment.
Request a payment. Tap
, enter the amount, then tap Request.
Ask Siri. Say something like, “Ask mom for 12 dollars for lunch yesterday.”
Manually accept or reject payments. By default, payments are automatically accepted
and added to Apple Pay Cash. To manually accept payments instead, go to Settings >
Wallet & Apple Pay, tap the Apple Pay Cash card, tap
, then select Manually Accept
Payments.
Accept a payment: Tap Accept in the payment bubble. You have 7 days to accept a
payment before itʼs returned to the sender.
Reject a payment: Tap the payment bubble, then tap Reject Payment.
View your payment history.
Single payment details: Tap the payment bubble.
All payments: Go to Settings > Wallet & Apple Pay, tap the Apple Pay Cash card, tap
, then tap Transactions. To get a PDF statement of your transaction history by
email, scroll to the bottom, then tap Request Transaction Statement.
Set up and manage Apple Pay Cash (U.S. only)
When you receive money in Messages, itʼs added to your Apple Pay Cash card. You can
use Apple Pay Cash right away to make purchases using Apple Pay in stores, in apps, and
on the web. You can also transfer your Apple Pay Cash balance to your bank account.
Set up Apple Pay Cash. Go to Settings > Wallet & Apple Pay, then turn on Apple Pay
Cash. Or just send or accept a payment in Messages.
Use Apple Pay Cash.
Send and receive money (U.S. only)
Buy with Apple Pay
Manage your Apple Pay Cash. Go to Settings > Wallet & Apple Pay, then tap the
Apple Pay Cash card. You can:
Add money from a debit card.
Transfer money from your Apple Pay Cash balance to your bank account.
Tap Transactions to view your history and details (including comments sent with
payments), manually accept or reject individual payments, and request a statement.
Choose to manually or automatically accept all payments.
See your suggested PIN. Apple Pay Cash doesn't require a PIN because every
payment is authenticated by Touch ID or a secure passcode. However, some
terminals may still require you to enter a four-digit code to complete the transaction.
Verify your identity for account servicing and to increase your transaction limits.
Contact Apple Support.
Apple Pay Cash and sending and receiving payments through Apple Pay are services provided by Green Dot
Bank, member FDIC.
View card activity and manage cards
View and manage card information. Go to Settings > Wallet & Apple Pay, then tap a
card. You can:
Tap Transactions to view your recent history. To hide this information, turn off
Transaction History. To view all your Apple Pay activity, see the statement from your
card issuer.
View the last four digits of the card number and Device Account Number—the
number transmitted to the merchant.
Change the billing address.
Remove the card from Apple Pay.
Manage Apple Pay settings. Go to Settings > Wallet & Apple Pay to:
Set your default card.
Add the shipping address and contact information for purchases.
If your iPad is lost or stolen. If you enabled Find My iPad, you can use it to help locate
and secure your iPad. You can also suspend or remove the ability to make purchases
using your cards in Apple Pay:
On a Mac or PC: Sign in to iCloud.com using your Apple ID, click Settings, click the
lost iPad in the My Devices section, then click Remove in the Apple Pay section.
On another iOS device: Go to Settings > [your name], tap the lost iPad, then tap
Remove All Cards (below Apple Pay).
You can also call the issuers of your cards.
Note: If you sign out of iCloud in Settings > [your name], all your credit and debit cards
for Apple Pay are removed from iPad. You can add the cards again the next time you sign
in to iCloud.
Sharing
Share from apps
Share from an app (except Files). In many apps that support sharing, tap Share or
then choose how to share. Options vary by app and may include choices from apps
youʼve downloaded. For example, if you download Pinterest, Pinterest may appear as
another option for sharing. For more information, see App extensions.
Share from the Files app. You can send a copy of any document in Files. Touch and hold
the document, tap Share, then choose an option for sending the document (for example,
Message, Mail, and so on).
Organize your sharing options. Tap the More button, then touch and drag
to move
items to new positions.
Share files from iCloud Drive
With iCloud Drive, you can store files in iCloud and access them from all your devices.
Any changes you make appear on all your devices set up with iCloud Drive.
You can also invite others to view and edit your files in iCloud Drive. They can access
your shared file by tapping a link you send—you donʼt need to send the file.
To use iCloud Drive, you must be signed in to iCloud using your Apple ID, and have
iCloud Drive turned on.
Turn on iCloud Drive. Go to Settings > [your name] > iCloud, then turn on iCloud Drive).
See Use iCloud Drive.
Invite others to view or edit a file. Tap Files > Browse > iCloud Drive. Touch and hold a
file in iCloud Drive, tap Share, tap
, then do one of the following:
Send a link to the people you want to view and edit the file: Tap a method for sending
a link to the file, enter any other requested information, then send or post the
invitation. People need an Apple ID to open the file.
Choose specific permission and access options: Tap Share Options, then select
permission settings:
Who can open, view, and print the file, but not make changes—only people you
invite or anyone with the link.
Who can open, view, print, and make changes to the file—only people you invite or
anyone with the link.
When you allow people to edit a file, itʼs updated with everyoneʼs changes automatically.
Note: If you donʼt see
, the file may be owned by someone else who shared it with you.
Tap Show People to see the ownerʼs name.
After you set the share options, tap Add People at the top left. Tap a method for sending
a link to the document (Message, Mail, and so on), enter any other requested information,
then send or post the invitation. See Use iCloud Drive.
Important: When you share a file that you have in iCloud Drive, a link to it (including its
name) is sent in your invitation. If the document is confidential, be sure to ask recipients
not to forward the link to anyone else.
Share files with AirDrop
With AirDrop you can share your photos, videos, websites, locations, and more wirelessly
with other nearby devices (iOS 7 or later). With iOS 8 or later, you can share with Mac
computers with OS X 10.10 or later. AirDrop transfers information using Wi-Fi and
Bluetooth—both must be turned on. To use AirDrop, you need to be signed in to iCloud
using your Apple ID. Transfers are encrypted for security.
Share an item using AirDrop. Tap Share
, then tap the name of a nearby AirDrop user.
Receive AirDrop items from others. Open Control Center, then tap
(if you donʼt see
, tap and hold the top left group of controls). Then choose to receive items from
Contacts only or from Everyone. You can accept or decline each request as it arrives.
For more information, see the Apple Support article How to use AirDrop with your iPhone,
iPad, or iPod touch.
Family Sharing
With Family Sharing, up to six family members can share iTunes Store, App Store, and
iBooks Store purchases; an Apple Music family membership; an iCloud storage plan; a
family calendar; family photos; and more, all without sharing accounts. For more
information, see the Apple Support article Family Sharing.
To use Family Sharing, one adult family member (the organizer) chooses features for the
family to share and invites up to five additional family members to participate. When
family members join, Family Sharing is set up on their devices automatically.
Family Sharing requires you to sign in to iCloud with your Apple ID, and to confirm the
Apple ID you use for the iTunes Store, App Store, and iBooks Store (you usually use the
same Apple ID for everything). Family Sharing is available on iOS devices with iOS 8 or
later, Mac computers with OS X 10.10 or later, and PCs with iCloud for Windows 5 or later.
You can be part of only one family group at a time.
Set up Family Sharing. Go to Settings > [your name] > Set Up Family Sharing, then
follow the onscreen instructions. As the family organizer, you choose the features you
want to share and invite family members to join. Depending on the services you choose,
you may be asked to set up an Apple Music family membership or an iCloud Storage
subscription. If you choose to share iTunes Store, App Store, and iBooks Store purchases
with your family members, you agree to pay for any purchases they initiate while part of
the family group.
Create an Apple ID for a child. Go to Settings > [your name] > Family Sharing, then tap
Create a Child Account. For more information, see the Apple Support article Family
Sharing and Apple ID for your child.
Accept an invitation to Family Sharing. Tap Accept in your invitation. Or, if you are near
the organizer during the setup process, you can enter the Apple ID and password you use
for iCloud on the organizerʼs device.
Share purchases. When your family uses iTunes Store, App Store, and iBooks Store
purchase sharing, all items are billed directly to the family organizerʼs Apple ID. Once
purchased, an item is added to the initiating family memberʼs account and is shared with
the rest of the family.
Access shared purchases from the iTunes Store. Open the iTunes Store, tap
Purchased, then tap My Purchases at the top left. Choose a family member, tap a
category (for example, Music or Movies) at the top of the screen, then tap a purchased
item.
Access shared purchases from the App Store. Open the App Store, then tap the photo
or
at the top right. Tap Purchased, choose a family member, then tap a purchased
item.
Access shared purchases from the iBooks Store. Open iBooks, tap Reading Now, then
tap the photo or
at the top right. Choose a family member, tap a category (for
example, Books or Audiobooks), tap a genre, then tap a purchased item.
Use a shared Apple Music family membership. If your family has an Apple Music family
membership, you can simply open Apple Music and start listening. Each family member
gets their own music library and personal recommendations. Make sure youʼre signed in
with the Apple ID you entered in Family Sharing settings.
Use a shared iCloud storage plan. If your family is sharing an iCloud storage plan
(200 GB or 2 TB), you can privately use as much storage as you need. You can also
purchase or use your own storage plan if you need more space.
Turn on Ask to Buy. The family organizer can require young family members to request
approval for purchases or free downloads. Go to Settings > [your name] > Family Sharing,
then tap the personʼs name.
Note: Age restrictions for Ask to Buy vary by region. In the United States, the family
organizer can enable Ask to Buy for any family member under age 18; for children under
age 13, itʼs enabled by default.
Hide your iTunes Store, App Store, and iBooks Store purchases. To hide all your
purchases from family members, go to Settings > [your name] > Family Sharing, then
turn off Share My Purchases. On your computer, you can also hide specific purchases so
they arenʼt available to other family members. For more information, see the Apple
Support article Hide and unhide apps for your iPhone, iPad, iPod touch, or Mac.
Share photos or videos with family members. When you set up Family Sharing, a
shared album called Family is automatically created in the Photos app on all family
membersʼ devices. To share a photo or video with family members, open the Photos app,
then view a photo or video or select multiple photos or videos. Tap
, tap iCloud Photo
Sharing, add comments, then share to your shared family album. Members can
unsubscribe from the family album, and the family organizer can delete it. See iCloud
Photo Sharing.
Add an event to the family calendar. When you set up Family Sharing, a shared
calendar called Family is automatically created in the Calendar app on all family
membersʼ devices. To add a family event, open the Calendar app, create an event, then
add the event to the family calendar. Members can unsubscribe from the family calendar,
and the family organizer can delete it. See Share iCloud calendars.
Set up a family reminder. When you set up Family Sharing, a shared list is automatically
created in the Reminders app on all family membersʼ devices. To add a reminder to the
family list, open the Reminders app, tap the family list, then add a reminder to the list.
Members can unsubscribe from the family reminder list, and the family organizer can
delete it. See Reminder lists.
Share your location with family members. Go to Settings > [your name] > iCloud >
Share My Location. To find a family memberʼs location, use the Find My Friends app. You
can also send or share your location with the Messages app (iOS 8 or later required). For
more information about using Messages to share your location, see Send and receive
messages.
Keep track of your familyʼs devices. If family members enabled Share My Location in
iCloud, you can help them locate missing devices. Open Find iPhone on your device or at
iCloud.com. For more information, see Find your iPad.
Leave Family Sharing. Go to Settings > [your name] > Family Sharing > [your name],
then tap Leave Family Sharing. If youʼre the organizer, tap Stop Family Sharing. For more
information, see the Apple Support article Leave Family Sharing.
iPad and other devices
Connect Bluetooth devices
You can use Bluetooth devices such as wireless headphones, speakers, and more with
iPad. For information, see the Apple Support article Supported Bluetooth profiles.
WARNING: For important information about avoiding hearing loss and avoiding
distractions that could lead to dangerous situations, see Important safety information.
Note: The use of certain accessories with iPad may affect wireless performance. Not all
iOS accessories are fully compatible with iPad. Turning on airplane mode may eliminate
audio interference between iPad and an accessory. Reorienting or relocating iPad and the
connected accessory may improve wireless performance.
Turn Bluetooth on or off. Go to Settings > Bluetooth. To quickly disconnect from
Bluetooth devices without turning Bluetooth off, open Control Center, then tap .
Pair a Bluetooth device. Follow the instructions that came with the device to put it in
discovery mode. Then go to Settings > Bluetooth, and tap the device in the Devices list to
connect.
iPad must be within about 33 feet (10 meters) of the Bluetooth device.
If you have AirPods and you set them up with one iOS device or Mac computer, they are
automatically set up with your other devices where youʼre signed in using the same
iCloud account (iOS 10, macOS Sierra, watchOS 3, or later required). For more
information about setting up AirPods, go to the AirPods Support website.
For information about Apple Wireless Keyboard, see Use an Apple Wireless Keyboard.
Unpair a device. Go to Settings > Bluetooth, tap
next to the device, then tap Forget
This Device. If you donʼt see the Devices list, make sure Bluetooth is on.
If you have AirPods and you tap Forget This Device, they are automatically removed from
other devices that are set up through your iCloud account.
Stream audio and video to other devices
Stream content from iPad to AirPlay-enabled or Bluetooth devices, or mirror your iPad
screen. (Apple TV, AirPlay-enabled devices, and Bluetooth devices are available
separately.)
Stream audio to an Apple TV, an AirPlay-enabled device, or a connected Bluetooth
device. Open the audio app you want to use, tap
, then choose a playback destination,
such as HomePod, Apple TV, or wireless headphones. While audio is playing, you can
also change the playback destination from the Lock screen or Control Center.
Note: If your AirPlay-enabled devices donʼt appear as a destination, make sure everything
is on the same Wi-Fi network.
With a Bluetooth device, the playback destination returns to iPad if the device moves out
of range.
Stream photos and video to an Apple TV using AirPlay. Open the photo or video app
you want to use. Tap
, tap
, then tap AirPlay. Then choose your Apple TV as the
playback destination. If an AirPlay passcode appears on the TV screen, enter the
passcode on your iPad.
Mirror your iPad screen on an Apple TV. Open Control Center, tap
, then choose
your Apple TV as the playback destination. If an AirPlay passcode appears on the TV
screen, enter the passcode on your iPad.
Switch back to iPad. Tap
or
, then choose your iPad.
You can also connect iPad to a TV, projector, or other external display using the
appropriate Apple cable or adapter. For more information, see the Apple Support article
About Apple Digital AV Adapters for iPhone, iPad, and iPod touch.
Control audio on multiple devices
With AirPlay and iPad, you can play different audio streams on AirPlay-compatible
devices connected to the same Wi-Fi network. For example, while playing your Chill Mix
on iPad, you can also play a podcast on the kitchen HomePod, and a favorite jazz playlist
on the living room Apple TV.
Choose a device in the Music or Podcasts app. On iPad, open the Music or Podcasts
app. Tap Now Playing at the bottom of the screen, then tap
to see separate cards for
iPad and each Apple TV, HomePod, or other AirPlay-compatible device.
Tap the card for the device you want to control, then choose some music or a podcast to
play. Tap a different card and choose some audio to play on that device.
Choose a device from Control Center. Open Control Center, then touch and hold the
audio card. Tap
, then tap the card for the device you want to control.
Apple Pencil
With iPad Pro or iPad (6th generation), you can use Apple Pencil (available separately) to:
Write a note by hand
Create a detailed sketch
Sign a document
Markup a PDF file, photo, email, and more
For more information, see the Apple Support article Use Apple Pencil with iPad Pro.
AirPrint
Use AirPrint to print wirelessly to an AirPrint-enabled printer from apps such as Mail,
Photos, and Safari. Many apps available on the App Store also support AirPrint.
iPad and the printer must be on the same Wi-Fi network. For more information about
AirPrint, see the Apple Support article About AirPrint.
Print a document. Tap
or
(depending on the app youʼre using).
See the status of a print job. Open the App Switcher, then tap Print Center. The badge
on the icon shows how many documents are in the queue.
Cancel a job. Select it in Print Center, then tap Cancel Printing.
Handoff
Continue working on one device where you left off on another. You can use Handoff with
many Apple apps—for example, Mail, Safari, Pages, Numbers, Keynote, Maps, Messages,
Reminders, Calendar, and Contacts—and even some third-party apps. To use Handoff,
you must be signed in to iCloud using the same Apple ID on all your devices. Your devices
must have Bluetooth on and be within Bluetooth range of one another (about 33 feet or
10 meters).
Switch devices.
From Mac to iPad: The Handoff icon of the app youʼre using on your Mac appears on
iPad on the right side of the Dock. Tap the Handoff icon to continue working in the
app on iPad.
From iPad to Mac: The Handoff icon of the app youʼre using on iPad appears on your
Mac at the left end of the Dock (or the top, depending on the Dock position). Click
the icon to continue working in the app.
Disable Handoff on your devices.
iOS devices: Go to Settings > General > Handoff.
Mac: Choose Apple Menu > System Preferences > General, then turn off “Allow
Handoff between this Mac and your iCloud devices.”
Universal Clipboard
Cut or copy content (a block of text or an image, for example) on your iPad, then paste it
on another iOS device or Mac computer, and vice versa.
For Universal Clipboard to work, you must be signed in to iCloud using the same Apple ID
on all your devices. Your devices must be connected to Wi-Fi, be within Bluetooth range
of one another (about 33 feet or 10 meters), have Bluetooth on, and have Handoff
enabled. Universal Clipboard requires iOS 10 and macOS Sierra.
You must cut, copy, and paste your content within a short period of time.
Copy or cut. Touch and hold a word or image to display the selection options, then
choose Copy or Cut.
Paste. Double-tap to place an insertion point and display the selection options, then
choose Paste.
For more information about selecting text or placing the insertion point, see Type and
edit text.
Make and receive Wi-Fi calls on iPad
Wi-Fi calling lets you make and receive calls on your iPad, iPod touch, or Mac by relaying
calls through your iPhone. To make calls this way, you need iOS 9 or later and OS X 10.10
or later. You must be signed in to iCloud and FaceTime on all your devices using the same
Apple ID as on iPhone.
Note: Wi-Fi calling on other devices is available with some carriers, and cellular charges
may apply.
You must first set up your iPhone, then your other devices. If you log out of iCloud or
FaceTime on iPhone, Wi-Fi calling is disabled.
Turn on Wi-Fi calls on your iPhone. Go to Settings > Phone > Wi-Fi Calling, then turn on
Wi-Fi Calling on This iPhone. Go to Settings > Phone > Call on Other Devices, turn on
Allow Calls on Other Devices, then select your iPad.
Turn on Wi-Fi Calling on your iPad. Go to Settings > FaceTime, turn on FaceTime, then
turn on Calls from iPhone.
Note: If you enable Wi-Fi Calling, emergency calls may be made over Wi-Fi, and your
deviceʼs location information may be used for emergency calls to aid response efforts,
regardless of whether you enable Location Services. Some carriers may use the address
you registered with the carrier when signing up for Wi-Fi Calling as your location.
Make a phone call on your iPad. Tap a phone number in Contacts, Calendar, FaceTime,
Messages, or Safari.
Receive a call on your iPad. Swipe the notification to answer, ignore, or respond with a
quick message.
For more information about Wi-Fi calls, see the Apple Support article Make a call with WiFi Calling.
Instant Hotspot
You can use Instant Hotspot on your iPhone (with iOS 8 or later) or iPad (Wi-Fi + Cellular
models with iOS 8 or later) to provide Internet access to your other devices (iOS 8 or
later) and Mac computers (OS X 10.10 or later) where youʼre signed in to iCloud with the
same Apple ID. Instant Hotspot uses your iPhone or iPad Personal Hotspot, without you
having to enter a password or even turn on Personal Hotspot.
Use Instant Hotspot. Go to Settings > Wi-Fi on your iOS (models without cellular
capabilities). Below Personal Hotspots, choose your iPhone or iPad network. On your
Mac, choose your iPhone or iPad network from your Wi-Fi settings.
When youʼre not using the hotspot, your devices disconnect to save battery life. For more
information about ways to set up a Personal Hotspot see Personal Hotspot.
Note: This feature may not be available with all carriers. Additional fees may apply.
Contact your carrier for more information.
Personal Hotspot
Use Personal Hotspot to share your iPad (Wi-Fi + Cellular models) Internet connection.
Computers can share your Internet connection using Wi-Fi, Bluetooth, or a USB cable.
Other iOS devices can share the connection using Wi-Fi. Personal Hotspot works only if
iPad is connected to the Internet over the cellular data network.
Note: This feature may not be available with all carriers. Additional fees may apply.
Contact your carrier for more information.
Share an Internet connection. Go to Settings > Cellular Data, then tap Personal Hotspot
—if it appears—to set up the service with your carrier.
After you turn on Personal Hotspot, other devices can connect in the following ways:
Wi-Fi: On the device, choose your iPad from the list of available Wi-Fi networks.
USB: Connect iPad to your computer using the cable that came with it. In your
computerʼs Network preferences, choose iPad, then configure the network settings.
Bluetooth: On iPad, go to Settings > Bluetooth, then turn on Bluetooth. To pair and
connect iPad with your Bluetooth device, refer to the documentation that came with
your device.
Note: When a device is connected, a blue band appears at the top of the iPad screen.
The Personal Hotspot icon
appears in the status bar of iOS devices using Personal
Hotspot.
Change the Wi-Fi password for iPad. Go to Settings > Personal Hotspot > Wi-Fi
Password, then enter a password of at least eight characters.
Change the name of your Personal Hotspot. You can change the name of your
Personal Hotspot by changing the name of your iPad. Go to Settings > General > About >
Name.
Monitor your cellular data network usage. Go to Settings > Cellular. See Cellular data
settings.
Use iTunes to transfer files
You can transfer files between iPad and your computer or other iOS devices with Files,
AirDrop, email attachments, or by connecting iPad to your computer and using iTunes.
Transfer files using iTunes. Connect iPad to your computer using the included cable. In
iTunes on your computer, select iPad, then click Apps. Use the File Sharing section to
transfer documents between iPad and your computer.
Apps that support file sharing appear in the Apps list. To delete a file, select it in the
Documents list on your computer, then press the Delete key. For more information, see
the Apple Support article About File Sharing on iPhone, iPad, and iPod touch.
Privacy and security
Privacy
Location Services
Location Services lets location-based apps such as Reminders, Maps, and Camera gather
and use data indicating your location. Your approximate location is determined using
available information from local Wi-Fi networks, if you have Wi-Fi turned on. The location
data collected by Apple isnʼt collected in a form that personally identifies you. When an
app is using Location Services,
appears in the status bar.
Privacy settings let you see and control which apps and system services have access to
Location Services, and to Contacts, Calendars, Reminders, and Photos.
Turn Location Services on or off. Go to Settings > Privacy > Location Services. You can
turn it off for some or for all apps and services. If you turn off Location Services, youʼre
asked to turn it on again the next time an app or service tries to use it.
Turn Location Services off for system services. Several system services, such as
location-based ads, use Location Services. To see their status, turn them on or off, or
show
in the status bar when these services use your location, go to Settings >
Privacy > Location Services > System Services.
Turn off access to private information. Go to Settings > Privacy. You can see which
apps and features have requested, and you have granted, access to private information.
You can turn off each appʼs access to each of these categories of information:
Contacts
Calendar
Reminders
Photos
Bluetooth Sharing
Microphone
Speech Recognition
Camera
HomeKit
Media & Apple Music
Motion & Fitness
Review the terms and privacy policy for each third-party app to understand how it uses
the data itʼs requesting. For more information, see the Apple Support article About
privacy and Location Services.
Advertising and tracking
Turn off location-based ads and offers. Go to Settings > Privacy > Location Services >
System Services, then turn off Location-Based Apple Ads.
Reset or limit Ad Tracking. Go to Settings > Privacy > Advertising (at the bottom of the
screen). To clear the data used to determine which ads might be relevant to you, tap
Reset Advertising Identifier. To opt out of targeted advertising, turn on Limit Ad Tracking.
Note: If you turn on Limit Ad Tracking, you may still receive the same number of ads, but
they may be less relevant to you.
View the information Apple uses to deliver targeted ads. Go to Settings > Privacy >
Advertising > View Ad information. The information is used by Apple to deliver more
relevant ads in Apple News and the App Store. Your personal data is not provided to
other parties.
Keep your Safari browsing activities to yourself. While browsing the web, you can
prevent cross-site tracking, block cookies, erase your browsing history, and more. See
Privacy and security for Safari.
For more information, go to Settings > Privacy > Advertising > About Advertising &
Privacy.
Security
Passcode
For better security, you can set a passcode that must be entered each time you turn on
or wake up iPad.
Set, change, or turn off the passcode. Go to Settings > Touch ID & Passcode
(supported models) or Settings > Passcode (other models).
To adjust when iPad automatically locks (and then requires the passcode to unlock), go
to Settings > Display & Brightness > Auto-Lock.
Setting a passcode turns on data protection, using your passcode as a key to encrypt
Mail messages and attachments stored on iPad, using 256-bit AES encryption. (Other
apps may also use data protection.)
Increase security. Turn off Simple Passcode and use a longer passcode. To enter a
passcode thatʼs a combination of numbers and letters, you use the keyboard. If you
prefer to unlock iPad using the numeric keypad, set up a longer passcode using numbers
only.
Add fingerprints and set options for Touch ID. (Supported models) Go to Settings >
Touch ID & Passcode. See Touch ID.
Allow access to features when iPad is locked. Go to Settings > Touch ID & Passcode
(supported models) or Settings > Passcode (other models). Optional features include:
Today View (see Today View)
Recent Notifications (see Notifications)
Control Center (see Control Center)
Siri (see Make requests)
Home Control (see Home overview)
Return Missed Calls (see Make and answer calls)
Erase data after ten failed passcode attempts. Go to Settings > Touch ID & Passcode
(supported models) or Settings > Passcode (other models), then tap Erase Data. After
ten failed attempts to enter your passcode, all settings are reset, all your information and
media are erased, and you must restore iPad from a backup or set it up again as new.
Two-factor authentication
Two-factor authentication is an extra layer of security for your Apple ID designed to
ensure that youʼre the only person who can access your account, even if someone knows
your password. Itʼs built into iOS 9 and later, and OS X 10.11 and later.
Turn on two-factor authentication. Turn it on when asked while setting up iPad. Or, go
to Settings > [your name] > Password & Security, then tap Turn On Two-Factor
Authentication.
When asked, verify your identity with a six-digit verification code (as described below).
You wonʼt be asked for a verification code again on your iPad unless you sign out
completely, erase your iPad, sign in to your Apple ID account page in Safari on your iPad,
or need to change your Apple ID password for security reasons.
Note: If you use two-step verification and upgrade to iOS 11 or later, your account might
be migrated to use two-factor authentication. Your account will have an optional,
additional recovery factor: a recovery key that can be generated on iPad. For more
information, see the Apple Support article Switch from two-step verification to two-factor
authentication.
Verify your identity with a six-digit verification code. When youʼre asked on your iPad
for the code, look for a notification on any of your trusted devices or at a trusted phone
number. On a trusted device, tap or click Allow to make a code appear on that device. To
send the code to a trusted phone number, tap “Didnʼt get a verification code?”, then
choose the phone number. Enter the code on your iPad.
If you canʼt receive a verification code automatically on your trusted devices (described
below), and a trusted phone number (described below) is unavailable, you can get a
verification code from Settings on a trusted device, even if your device is offline. On a
trusted iOS device, go to Settings > [your name] > Password & Security, then tap Get
Verification Code. On a trusted Mac, choose Apple Menu > System Preferences >
iCloud > Account Details > Security, then click Get Verification Code.
Add another iOS device (iOS 9 or later) or a Mac (OS X El Capitan or later) as a
trusted device. After you turn on two-factor authentication, use the same Apple ID to
sign in to iCloud on another device. If you previously signed in, sign in again. (On an iOS
device, go to Settings > [your name]. On a Mac, choose Apple Menu > System
Preferences > iCloud.) Verify your identity with a six-digit verification code (as described
above). You can receive verification codes on all your trusted devices.
You wonʼt be asked for a verification code again on a trusted device unless you sign out
completely, erase your device, sign in to your Apple ID account page in Safari on that
device, or need to change your Apple ID password for security reasons.
Add a trusted phone number. Go to Settings > [your name] > Password & Security, tap
Edit (above the list of trusted phone numbers), then tap Add a Trusted Phone Number.
You must verify at least one trusted phone number to enroll in two-factor authentication.
You should also consider verifying other phone numbers you can access, such as a home
phone, or a number used by a family member or close friend. Trusted phone numbers
donʼt automatically receive verification codes. If you canʼt access any trusted devices
when setting up a new device for two-factor authentication, tap “Didnʼt get a verification
code?” on the new device, then choose one of your trusted phone numbers to receive
the verification code.
Remove a trusted phone number. Go to Settings > [your name] > Password & Security,
tap Edit (above the list of trusted phone numbers), then tap
next to the phone number.
Get a verification code on a trusted iPad, even when youʼre offline. If you need to
enter a verification code on another device when setting it up for two-factor
authentication, but you canʼt receive the code on a trusted iPad automatically, you can
get a verification code from Settings on the trusted iPad. Go to Settings > [your name] >
Password & Security, then tap Get Verification Code.
View or remove trusted devices. Go to Settings > [your name]. A list of the devices
associated with your Apple ID appears near the bottom of the screen. To see if a listed
device is trusted, tap it, then look for “This device is trusted and can receive Apple ID
verification codes.” To remove a device, tap it, then tap Remove From Account.
Turn off two-factor authentication. Sign in to your Apple ID account page, tap Security,
tap Edit, then tap Turn Off Two-Factor Authentication.
For more help with two-factor authentication, see the Apple Support article Two-factor
authentication for Apple ID.
Touch ID
(Supported models) When you set up Touch ID, you can unlock iPad by placing a finger
on the Home button. You can use Touch ID to authorize purchases from the iTunes Store,
App Store, and iBooks Store, and to authorize payments with Apple Pay. You can also
sign in to many third-party apps using Touch ID.
To use Touch ID, you must set a passcode on your iPad. You must enter your passcode
for additional security validation when you do the following:
Turn on or restart your device
Update your software
Erase your device
View or change passcode settings
Install iOS configuration profiles
Set up fingerprint recognition. Follow the onscreen instructions when you first set up
iPad, or go to Settings > Touch ID & Passcode. Set whether you want to use a fingerprint
to unlock iPad and to make purchases. Tap Add a Fingerprint, then follow the onscreen
instructions. You can add multiple fingerprints (both of your thumbs and forefingers, for
example, and one for your spouse).
Name a fingerprint. Tap the fingerprint, then enter a name, such as “Thumb.”
Delete a fingerprint. Tap the fingerprint, then tap Delete Fingerprint. If you added more
than one fingerprint, place a finger on the Home button to find out which fingerprint it is.
Use Touch ID to make a payment in the iTunes Store, App Store, or iBooks Store.
Follow the instructions to enable purchases with your fingerprint. Or go to Settings >
Touch ID & Passcode, then turn on iTunes & App Store.
Note: Youʼre asked for your Apple ID password for the first purchase you make in the
iTunes Store, App Store, or iBooks Store.
Use Touch ID to make a payment within an app or on a website that supports
Apple Pay. Go to Settings > Touch ID & Passcode to ensure that Apple Pay is turned on
for Touch ID. To complete a payment with Apple Pay, approve with Touch ID. For more
information about Apple Pay, go to the Apple Pay website.
Turn off Touch ID. Go to Settings > Touch ID & Passcode, then turn off one or more
options: iPad Unlock, Apple Pay, or iTunes & App Store.
iCloud Keychain
iCloud Keychain keeps your Safari website user names and passwords, credit card
information, and Wi-Fi network information up to date across all of your approved devices
(iOS 7 or later) and Mac computers (OS X 10.9 or later). iCloud Keychain is secured with
256-bit AES encryption during storage and transmission, and its data cannot be read by
Apple.
iCloud Keychain works with Safari Password Generator and AutoFill. When youʼre setting
up a new account, Safari Password Generator suggests unique, hard-to-guess
passwords. You can use AutoFill to have iPad enter your user name, password, and credit
card info automatically. To protect your personal information, set a passcode if you turn
on iCloud Keychain and AutoFill.
Note: Some websites do not support AutoFill.
iCloud Keychain can also keep the accounts you use in Mail, Contacts, Calendar, and
Messages up to date across all of your iOS devices and Mac computers.
To learn more about iCloud Keychain, see the Apple Support article Frequently asked
questions.
Set up iCloud Keychain. Go to Settings > [your name] > iCloud > Keychain. Turn on
iCloud Keychain, then follow the onscreen instructions.
When you set up iCloud Keychain, you create an iCloud Security Code. You can use your
iCloud Security Code to authorize additional devices to use your iCloud Keychain. Itʼs also
used to verify your identity so that you can perform other iCloud Keychain actions, such
as recovering your iCloud Keychain if you lose all your devices.
Set up iCloud Keychain on additional devices. Set up iCloud Keychain for each device
that you want to add. When you turn on iCloud Keychain on an additional device, your
other devices that use iCloud Keychain receive a notification requesting approval for the
additional device. After you approve the additional device, your iCloud Keychain
automatically begins updating on that device.
To approve iCloud Keychain on an additional device when you donʼt have access to your
other devices, follow the onscreen instructions to use your iCloud Security Code.
Forgot your iCloud Security Code? If you enter the wrong iCloud Security Code too
many times when using iCloud Keychain, your iCloud Keychain is disabled on that device,
and your keychain in iCloud is deleted. To reset or create a new iCloud Security Code, see
the Apple Support article If you enter your iCloud Security Code incorrectly too many
times.
Find your iPad
If you misplace your iPad, the Find My iPhone app can help you locate it and protect your
data. Use the Find My iPhone app on another iPad, iPhone, or iPod touch—or use the
Find My iPhone web app on any Mac or PC—to locate your iPad on a map, lock it
remotely, play a sound, display a message, or erase all its data. Find My iPhone includes a
feature called Activation Lock that prevents anyone else from activating and using your
iPad, even if itʼs completely erased.
You can also use Find My iPhone to locate your AirPods, your Apple Watch, and your
other iOS devices.
Note: For more information about Find My iPhone, refer to the Help in the app.
Allow Find My iPhone to locate your iPad. Go to Settings > [your name] > iCloud, then
turn on Find My iPad. Also turn on Send Last Location to have iPad send its last location
prior to the battery running out. (See iCloud if you need help setting up iCloud.)
Important: To use these features, the Find My iPad setting must be turned on before
your iPad is lost. iPad must be able to connect to the Internet for you to locate and secure
the device.
Use Find My iPhone. On iPad or another iOS device, open the Find My iPhone app. Or on
a computer, go to the Find My iPhone web app. Sign in, then select the device you want
to locate.
Play Sound: Play a sound at full volume for two minutes, even if the ringer is set to
silent.
Lost Mode: Immediately lock your missing iPad with a passcode and display a custom
message on the screen with a contact number. Find My iPhone tracks and reports the
location of your iPad, so you can see where itʼs been.
When iPad is in Lost Mode on models that support Apple Pay, Find My iPhone
attempts to suspend the ability to pay with credit and debit cards used for Apple Pay.
Erase iPad: Protect your privacy by erasing all the information and media on your iPad
and restoring it to its original factory settings. Activation Lock prevents anyone else
from activating and using your iPad, even after you erase it with Find My iPhone. On
models that support Apple Pay, erasing iPad also removes the ability to pay with
credit and debit cards used for Apple Pay.
Before you sell or give away your iPad, you should completely erase it in Settings, which
removes Activation Lock. The next owner can then activate and use the device normally.
Restart, update, reset, and restore
Restart an app or iPad
If something isnʼt working right, try restarting the problem app or your iPad.
Restart an app. If an app isnʼt working properly, you can force it to quit and then try to
reopen it. (Typically, there is no reason to quit an app; quitting it doesnʼt save battery
power, for example.) To quit the app, double-click the Home button, then swipe up on the
app in the App Switcher. Opening it again may resolve the problem.
Restart iPad. Press and hold the Sleep/Wake button until the slider appears. Drag the
slider to turn off iPad. To turn iPad back on, press and hold the Sleep/Wake button until
the Apple logo appears.
Force restart iPad. If iPad isnʼt responding, press and hold the Sleep/Wake button and
the Home button at the same time for at least ten seconds, until the Apple logo appears.
If iPad still doesnʼt respond or turn on, see the Apple Support article If your iPad wonʼt
turn on.
Update iOS software
You can update the iOS software in Settings or by using iTunes. Your content and
settings remain unchanged.
Before you update, make a backup of iPad using iCloud or iTunes.
Update wirelessly on iPad. If a message says that an update is available, tap Install Now.
Or go to Settings > General > Software Update to check for available software updates.
Update software using iTunes. iTunes checks for available software updates each time
you sync iPad using iTunes.
For more information, see the Apple Support articles Update the iOS software and If you
canʼt update or restore your device.
Reset iPad settings
Without erasing your content, you can return iPad settings to their defaults. If you want to
save your settings, back them up in iCloud or back them up using iTunes before resetting
them.
If you want to use iTunes to delete your content along with your settings, and then
restore iPad to factory settings, see Restore iPad. If you want to completely erase all
content and settings, see Erase iPad.
Return settings to their defaults. Go to Settings > General > Reset, then choose an
option:
WARNING: If you choose the Erase All Content and Settings option, all of your content is
removed. See Erase iPad.
Reset All Settings: All settings are reset.
Reset Network Settings: Only network settings are removed.
When you reset network settings, previously used networks and VPN settings that
werenʼt installed by a configuration profile or mobile device management (MDM) are
removed. Wi-Fi is turned off and then back on, disconnecting you from any network
youʼre on. The Wi-Fi and Ask to Join Networks settings remain turned on.
To remove VPN settings installed by a configuration profile, go to Settings >
General > Profiles & Device Management, select the configuration profile, then tap
Remove Profile. This also removes other settings and accounts provided by the
profile. For more information, see Profiles settings in this guide. To remove network
settings installed by MDM, go to Settings > General > Profiles & Device Management,
select the management, then tap Remove Management. This also removes other
settings and certificates provided by MDM. For more information, see “Mobile device
management (MDM)” in the iOS Deployment Reference.
Reset Keyboard Dictionary: You add words to the keyboard dictionary by rejecting
words iPad suggests as you type. Resetting the keyboard dictionary erases only the
words youʼve added.
Reset Home Screen Layout: Returns the built-in apps to their original layout on the
Home screen.
Reset Location & Privacy: Resets the location services and privacy settings to their
defaults.
Restore iPad
To restore copies of your content and settings to iPad, you must first create a backup of
your iPad. See Back up iPad with iCloud Backup and Back up iPad with iTunes.
If youʼre asked to enter your passcode or Apple ID password and youʼve forgotten either,
see Forgot your Apple ID, iPad passcode, or iCloud Security Code?
Erase then restore iPad from a backup. Go to Settings > General > Reset, then tap
Erase All Content and Settings. After iPad restarts, follow the setup assistant to restore
iPad from an iCloud or iTunes backup.
Restore iPad from an iTunes backup. Connect iPad to the computer you normally sync
with, then in iTunes choose File > Devices > Restore from Backup.
Restore iPad to factory settings using iTunes. Connect iPad to a computer, open
iTunes on the computer, click the iPad button near the top of the iTunes window, then
click Restore iPad in the Summary pane. All of the content and settings on iPad are
deleted, and the latest iOS software is installed.
Important: Restoring iPad to factory settings using iTunes deletes all your information
and settings, but doesnʼt erase it. Deleted information canʼt be accessed through the
iPad interface, but it remains on your device. For information about erasing all content
and settings, see Erase iPad.
For more information, see the Apple Support articles Restore your iPhone, iPad, or
iPod touch from a backup and If you can‘t update or restore your iPhone, iPad, or
iPod touch. For more information about iTunes, refer to the Help in the app.
Restore purchased items
You can redownload items from the iTunes Store, App Store, and iBooks Store, without
repurchasing them. If youʼre part of a Family Sharing group, you can download items
purchased by other family members, too.
If you see
next to an item, itʼs already been purchased, and you can download it again.
To find purchases that arenʼt on your iPad, do the following:
iTunes Store: Tap Purchased, tap a category (Music, Movies, or TV Shows), then tap
Not on this iPad. To see purchases from other family members, tap My Purchases in
the top-left corner, then choose a family member.
App Store: Tap Updates, tap your profile picture at the top right, then tap Purchased,
tap My Purchases (or a family memberʼs purchases), then tap Not on this iPad.
iBooks Store: Tap Purchased, tap a category from your purchases (or from a family
memberʼs purchases), then tap Not on this iPad.
Download all your purchased ringtones and alerts. Go to Settings > Sounds >
Ringtone > Download All Purchased Tones.
Erase iPad
When you delete data, itʼs no longer accessible through the iPad interface, but it isnʼt
erased from iPad. To remove all of your content and settings, erase iPad. If you want to
save your content and settings, back them up in iCloud or back them up using iTunes
before erasing iPad.
Important: Erase iPad before you sell it or give it away. If you previously turned on Find
my iPad, Activation Lock is removed when you erase iPad, making it ready for a new
owner. For more information, see the Apple Support article What to do before selling or
giving away your iPad.
Erase all content and settings from iPad. Go to Settings > General > Reset, then tap
Erase All Content and Settings. (If youʼre asked to enter your passcode or Apple ID
password and youʼve forgotten either, see Forgot your Apple ID, iPad passcode, or iCloud
Security Code?)
After iPad restarts, follow the setup assistant to either set up iPad as new or restore it
from an iCloud or iTunes backup.
Accessibility
Accessibility features
iPad provides many accessibility features to support your vision, interaction, hearing, and
learning needs.
Vision
VoiceOver
Zoom
Magnifier
Display accommodations
Speak Selection, Speak Screen, and Typing Feedback
Large, bold, and high-contrast text
Button shapes
Reduce motion
On/off switch labels
Assignable tones
Audio descriptions
Interaction
Switch Control
AssistiveTouch
Touch Accommodations
Use accessibility features with Siri
Widescreen keyboards
Software and hardware keyboards
Hearing
Made for iPhone hearing aids
Mono audio and balance
Subtitles and closed captions
LED Flash for Alerts
Learning
Guided Access
Turn on accessibility features. Go to Settings > General > Accessibility to set up and
configure features. Then, you can quickly turn features on or off with the following
methods:
Ask Siri. Say something like: “Turn on VoiceOver.” See Use accessibility features with
Siri.
Use accessibility shortcuts.
Use iTunes on your computer to configure accessibility on iPad. In iTunes, you can
enable a limited number of accessibility features, including VoiceOver, Zoom, Invert
Colors, Speak Auto-text, mono audio, and “Show closed captions when available.” Click
Summary, then click Configure Accessibility at the bottom of the Summary screen. For
more information, see iTunes Help on your computer.
Use accessibility shortcuts
You can quickly turn on or off many accessibility features using the Home button or
Control Center.
Use the Home button.
Set up Accessibility Shortcut: Go to Settings > General > Accessibility > Accessibility
Shortcut, then select the features you use the most.
Use Accessibility Shortcut: Triple-click the Home button.
Slow down the double-click or triple-click speed for the Home button: Go to
Settings > General > Accessibility > Home Button.
Use Control Center.
Customize Control Center: Go to Settings > Control Center > Customize Controls,
then tap
next to accessibility features such as Accessibility Shortcuts, Magnifier,
Hearing Aids, Touch Accommodations, and Guided Access.
Activate an accessibility feature from Control Center: Open Control Center, then tap
the accessibility feature.
Vision
VoiceOver
VoiceOver overview
VoiceOver is a gesture-based screen reader that lets you use iPad even if you donʼt see
the screen. Add VoiceOver to Accessibility Shortcut to enable it wherever you are in iOS.
Hear a description of whatʼs on your screen—from battery level, to whoʼs calling, to which
app your finger is on. You can also adjust the speaking rate and pitch to suit you.
VoiceOver tells you about each item you select. The VoiceOver cursor (a black outline)
encloses the item and VoiceOver speaks its name or describes it.
When you touch the screen or drag your finger over it, VoiceOver speaks the item your
finger is on, including icons and text. To interact with an item, such as a button or link, or
to navigate to another item, use VoiceOver gestures.
When you go to a new screen, VoiceOver plays a sound, then selects and speaks the first
item on the screen (typically in the upper-left corner). It tells you when the display
changes to landscape or portrait orientation, when the screen becomes dimmed or
locked, and whatʼs active on the Lock screen when you wake iPad.
Note: VoiceOver is available in many languages. Go to Settings > General > Language &
Region to choose a language.
Learn VoiceOver gestures
Important: VoiceOver changes the gestures you use to control iPad. When VoiceOver is
on, you must use VoiceOver gestures to operate iPad—even to turn VoiceOver off.
When VoiceOver is on, standard touchscreen gestures have different effects, and
additional gestures let you move around the screen and control individual items.
VoiceOver gestures include two-, three-, and four-finger taps and swipes. For best
results using multifinger gestures, let your fingers touch the screen with some space
between them.
You can use different techniques to perform VoiceOver gestures. For example, you can
perform a two-finger tap using two fingers on one hand, or one finger on each hand. You
can even use your thumbs. Some people use a split-tap gesture: instead of selecting an
item and double-tapping, touch and hold an item with one finger, then tap the screen
with another finger.
Try different techniques to discover which works best for you. If a gesture doesnʼt work,
try a quicker movement, especially for a double-tap or swipe gesture. To swipe, try
brushing the screen quickly with your finger or fingers.
In VoiceOver settings, you can enter a special area where you can practice VoiceOver
gestures without affecting iPad or its settings.
Practice VoiceOver gestures. Go to Settings > General > Accessibility > VoiceOver,
then tap VoiceOver Practice. When you finish practicing, tap Done. If you donʼt see the
VoiceOver Practice button, make sure VoiceOver is turned on.
Here are some key VoiceOver gestures:
Navigate and read
Tap: Selects and speaks the item.
Swipe right or left: Selects the next or previous item.
Swipe up or down: Depends on the rotor setting. See Use the VoiceOver rotor.
Two-finger swipe up: Reads all from the top of the screen.
Two-finger swipe down: Reads all from the current position.
Two-finger tap: Stops or resumes speaking.
Two-finger scrub (move two fingers back and forth three times quickly, making a
“z”): Dismisses an alert or returns to the previous screen.
Three-finger swipe up or down: Scrolls one page at a time.
Three-finger swipe right or left: Goes to the next or previous page (on the Home
screen, for example).
Three-finger tap: Speaks additional information, such as position within a list or
whether text is selected.
Four-finger tap at top of screen: Selects the first item on the page.
Four-finger tap at bottom of screen: Selects the last item on the page.
Activate
Double-tap: Activates the selected item.
Triple-tap: Double-taps an item.
Split-tap: As an alternative to selecting an item and double-tapping to activate it,
touch and hold an item with one finger, then tap the screen with another.
Double-tap and hold (1 second) + standard gesture: Use a standard gesture. The
double-tap and hold gesture tells iPad to interpret the next gesture as standard. For
example, you can double-tap and hold your finger on the screen until you hear three
rising tones, and then without lifting your finger, drag your finger on a slider.
Two-finger double-tap: Initiates an action or halts or pauses an action in progress.
For example, you can:
Play or pause in Music, Videos, or Photos (slideshows).
Take a photo or start or pause recording in Camera.
Start or stop the stopwatch.
Two-finger double-tap and hold: Changes an itemʼs label to make it easier to find.
Two-finger triple-tap: Opens the Item Chooser.
Three-finger double-tap: Mutes or unmutes VoiceOver. If both VoiceOver and Zoom
are enabled, use the three-finger triple-tap gesture.
Three-finger triple-tap: Turns the screen curtain on or off. If both VoiceOver and
Zoom are enabled, use the three-finger quadruple-tap gesture.
Use iPad with VoiceOver
Turn VoiceOver on or off. Summon Siri and say “turn on VoiceOver” or “turn off
VoiceOver.” You can also go to Settings > General > Accessibility > VoiceOver, or use
accessibility shortcuts.
Unlock iPad. Press either the Sleep/Wake or Home button, then double-tap the screen.
On iPad models with Touch ID, you can unlock iPad by placing your finger on the Home
button. See Wake and unlock iPad.
Enter your passcode silently. To avoid having your passcode spoken as you enter it,
enable handwriting mode or type onscreen braille.
Unlock iPad with Touch ID. You can unlock iPad by pressing your finger on the Home
button if you set up Touch ID (on supported models). To use Touch ID by touching
instead of pressing the Home button, go to Settings > General > Accessibility > Home
Button, then turn on Rest Finger to Open.
Open an app, toggle a switch, or tap an item. Tap the item, then double-tap the
screen.
Double-tap the selected item. To invoke a command normally executed by tapping
twice on the screen—selecting a word or zooming an image, for example—tap three
times.
Adjust a slider. Tap the slider, then swipe up or down with one finger.
Use a standard gesture. Double-tap and hold your finger on the screen until you hear
three rising tones, then make the gesture. When you lift your finger, VoiceOver gestures
resume. For example, to drag a volume slider with your finger instead of swiping up and
down, select the slider, double-tap and hold, wait for the three tones, then slide left or
right.
Scroll a list or area of the screen. Swipe up or down with three fingers.
Use the list index: Some lists have an alphabetical table index along the right side.
Select the index, then swipe up or down to move through the index. You can also
double-tap, hold, then slide your finger up or down.
Reorder a list: You can change the order of items in some lists, such as the Rotor
items in Accessibility settings. Tap
to the right of an item, double-tap and hold
until you hear three rising tones, then drag up or down.
Open the notifications screen. Tap any item in the status bar, then swipe down with
three fingers. Or touch and hold the top of the screen until you hear a sound, then swipe
down. To return to where you were, do a two-finger scrub (move two fingers back and
forth three times quickly, making a “z”) or press the Home button.
Open Control Center. Tap any item in the status bar, then swipe up with three fingers. Or
touch and hold the bottom of the screen until you hear a sound, then swipe up. To
dismiss Control Center, do a two-finger scrub or press the Home button.
Search from the Home screen. Tap anywhere on the Home screen outside the status
bar, then swipe down with three fingers.
Activate Slide Over. Tap any item in the status bar, then swipe left with three fingers. Or
touch and hold the right edge of the screen until you hear a sound, then swipe left.
Select the divider: Tap the divider.
Turn on Split View: Double-tap the divider.
Resize the divider: Double-tap and hold the divider, then drag it.
Switch apps. Open the App Switcher, swipe left or right with one finger to select an app,
then double-tap to switch to it. Or, set the rotor to Actions while viewing open apps, then
swipe up or down to cycle through the apps.
Rearrange apps on your Home screen. Use one of the following methods:
Drag and drop: Tap an icon on the Home screen, then double-tap and hold your finger
on the screen until you hear three rising tones. The itemʼs relative location is
described as you drag. Lift your finger when the icon is in its new location. Drag an
icon to the edge of the screen to move it to another Home screen. You can continue
to select and move items until you press the Home button.
Move actions: Tap an app, then swipe down to hear available actions. When you hear
Arrange Apps, double-tap to start arranging apps. Find the app you wish to move,
then swipe down to the Move action and double-tap. Move the VoiceOver cursor to
the new destination for the app, then choose from the available actions: Cancel Move,
Create New Folder, Add to Folder, Move Before, or Move After. You can continue to
select and move items until you press the Home button.
Speak iPad status information. Tap the status bar at the top of the screen, then swipe
left or right to hear information about the time, battery state, Wi-Fi signal strength, and
more.
Speak notifications. Go to Settings > General > Accessibility > VoiceOver, then turn on
Always Speak Notifications. Notifications, including the text of incoming text messages,
are spoken as they occur, even if iPad is locked. Unacknowledged notifications are
repeated when you unlock iPad.
Turn the screen curtain on or off. Triple-tap with three fingers. When the screen curtain
is on, the screen contents are active even though the display is turned off.
Set audio routing options. Go to Settings > General > Accessibility > VoiceOver > Audio.
Device-specific options are shown if you connect additional devices, such as an
instrument amplifier or DJ mixer.
Use the VoiceOver rotor
Use the rotor to choose what happens when you swipe up or down with VoiceOver turned
on, or to select special input methods such as Braille Screen Input or Handwriting.
Operate the rotor. Rotate two fingers on the screen around a point between them. If you
prefer to use one finger on each hand, simultaneously flick up with one finger and flick
down with the other.
Choose your rotor options. Go to Settings > General > Accessibility > VoiceOver >
Rotor, then select the options you want to include in the rotor.
The available rotor options and their effects depend on what youʼre doing. For example, if
youʼre reading an email, you can use the rotor to switch between hearing text spoken
word-by-word or character-by-character when you swipe up or down. If youʼre browsing
a webpage, you can set the rotor to speak all the text (either word-by-word or characterby-character), or to jump from one item to another of a certain type, such as headings or
links.
When you use an Apple Wireless Keyboard to control VoiceOver, the rotor lets you adjust
settings such as volume, speech rate, use of pitch or phonetics, typing echo, and reading
of punctuation.
VoiceOver basics
Important: VoiceOver changes the gestures you use to control iPad. When VoiceOver is
on, you must use VoiceOver gestures—even to turn VoiceOver off.
Explore. Drag your finger over the screen. VoiceOver speaks each item you touch. Lift
your finger to leave an item selected.
Activate an item: Tap once to select an item, then double-tap to activate it.
Select the next or previous item: Swipe right or left with one finger. Item order is leftto-right, top-to-bottom.
Select the first or last item on the screen: Tap with four fingers at the top or bottom of
the screen.
Select an item by name: Triple-tap with two fingers anywhere on the screen to open
the Item Chooser. Then type a name in the search field, or swipe right or left to move
through the list alphabetically, or tap the table index to the right of the list and swipe
up or down to move quickly through the list of items. You can also use handwriting to
select an item by writing its name; see Write with your finger. To dismiss the Item
Chooser without making a selection, double-tap.
Change an itemʼs name so itʼs easier to find: Select the item, then double-tap and
hold with two fingers anywhere on the screen.
Speak the text of the selected item: Set the rotor to characters or words, then swipe
down or up with one finger. See Use the VoiceOver rotor.
Hear additional detail about using a button or feature: Go to Settings > General >
Accessibility > VoiceOver, then turn Speak Hints on or off.
Use phonetic spelling: Go to Settings > General > Accessibility > VoiceOver >
Phonetic Feedback.
Speak the entire screen, from the top: Swipe up with two fingers.
Speak from the current item to the bottom of the screen: Swipe down with two
fingers.
Pause speaking: Tap once with two fingers. Tap again with two fingers to resume, or
select another item.
Mute VoiceOver: Double-tap with three fingers; repeat to unmute. If both VoiceOver
and Zoom are enabled, triple-tap with three-fingers. If youʼre using an external
keyboard, press the Control key.
Silence sound effects: Go to Settings > General > Accessibility > VoiceOver > Audio,
then turn off Use Sound Effects.
Use a larger VoiceOver cursor. Go to Settings > General > Accessibility > VoiceOver,
then turn on Large Cursor.
Adjust the speaking voice. You can adjust the VoiceOver speaking voice:
Adjust the volume: Use the volume buttons on iPad. You can also add volume to the
rotor, then swipe up or down to adjust it. See Use the VoiceOver rotor.
Change the speaking rate: Go to Settings > General > Accessibility > VoiceOver, then
drag the Speaking Rate slider. You can also set the rotor to Speaking Rate, then swipe
up or down to adjust.
Adjust the pitch of the speaking voice: Go to Settings > General > Accessibility >
VoiceOver > Speech, then drag the Pitch slider.
Use pitch change: VoiceOver can use a higher pitch when speaking the first item of a
group (such as a list or table) and a lower pitch when speaking the last item of a
group. Go to Settings > General > Accessibility > VoiceOver > Speech, then turn on
Use Pitch Change.
Control audio ducking: To choose whether audio thatʼs playing is turned down while
VoiceOver speaks, set the rotor to Audio Ducking, then swipe up or down.
Change the language for iPad: Go to Settings > General > Language & Region.
VoiceOver pronunciation of some languages is affected by the Region Format you
choose there.
Change pronunciation: Set the rotor to Language, then swipe up or down. Language
is available in the rotor only if you select more than one pronunciation in Settings >
General > Accessibility > VoiceOver > Speech > Rotor Languages.
Choose which dialects are available in the rotor: Go to Settings > General >
Accessibility > VoiceOver > Speech > Rotor Languages. To adjust voice quality or
speaking rate, tap a language. To remove languages from the rotor or change their
order, tap Edit, tap the Delete button or drag
up or down, then tap Done.
Set the default voice for the current iPad language: Go to Settings > General >
Accessibility > VoiceOver > Speech > Voice.
Download an enhanced quality reading voice: Go to Settings > General >
Accessibility > VoiceOver > Speech, tap a language, then choose an enhanced voice.
If youʼre using English, you can choose to download Alex (869 MB), the same highquality U.S. English voice used for VoiceOver on Mac computers.
Specify the pronunciation of certain words: Go to Settings > General > Accessibility >
Speech > Pronunciations. Tap
, enter a phrase, then dictate or spell out how you
want the phrase to be pronounced.
Control verbosity. To control how much VoiceOver tells you, go to Settings > General >
Accessibility > VoiceOver > Verbosity. You can control whether VoiceOver speaks hints,
punctuation, uppercase letters, embedded links, and more. You can even have VoiceOver
say “emoji” after it reads an emoji in text.
Use the onscreen keyboard
When you activate an editable text field, the onscreen keyboard appears (unless you
have an Apple Wireless Keyboard attached).
Activate a text field. Select the text field, then double-tap. The insertion point and the
onscreen keyboard appear.
Choose a typing style. Go to Settings > General > Accessibility > VoiceOver > Typing
Style. Or, set the rotor to Typing Mode, then swipe up or down.
Enter text. Type characters using the onscreen keyboard:
Standard typing: Select a key on the keyboard by swiping left or right, then doubletap to enter the character. Or move your finger around the keyboard to select a key
and, while continuing to touch the key with one finger, tap the screen with another
finger. VoiceOver speaks the key when itʼs selected, and again when the character is
entered.
Touch typing: Touch a key on the keyboard to select it, then lift your finger to enter
the character. If you touch the wrong key, slide your finger to the key you want.
VoiceOver speaks the character for each key as you touch it, but doesnʼt enter a
character until you lift your finger.
Direct Touch typing: VoiceOver is disabled for the keyboard only, so you can type just
as you do when VoiceOver is off.
Move the insertion point. Swipe up or down to move the insertion point forward or
backward in the text. Use the rotor to choose whether you want to move the insertion
point by character, by word, or by line. To jump to the beginning or end, double-tap the
text.
VoiceOver makes a sound when the insertion point moves, and speaks the character,
word, or line that the insertion point moves across. When moving forward by words, the
insertion point is placed at the end of each word, before the space or punctuation that
follows. When moving backward, the insertion point is placed at the end of the preceding
word, before the space or punctuation that follows it.
Move the insertion point past the punctuation at the end of a word or sentence. Use
the rotor to switch back to character mode.
When moving the insertion point by line, VoiceOver speaks each line as you move across
it. When moving forward, the insertion point is placed at the beginning of the next line
(except when you reach the last line of a paragraph, when the insertion point is moved to
the end of the line just spoken). When moving backward, the insertion point is placed at
the beginning of the line thatʼs spoken.
Change typing feedback. By default, VoiceOver speaks characters as well as words
when you type. To hear no feedback, hear characters only, or hear words only, go to
Settings > General > Accessibility > VoiceOver > Typing Feedback, then choose an
option.
Use phonetics in typing feedback. Go to Settings > General > Accessibility >
VoiceOver > Phonetic Feedback. Text is read character by character. VoiceOver first
speaks the character, then its phonetic equivalent—for example, “f” and then “foxtrot.”
Delete a character. Use
with any of the VoiceOver typing styles. To control whether
VoiceOver speaks each character as itʼs deleted, go to Settings > General >
Accessibility > VoiceOver > Verbosity > Deleting Text. If you choose Change Pitch,
VoiceOver speaks deleted characters in a lower pitch.
Select text. Set the rotor to Edit, swipe up or down to choose Select or Select All, then
double-tap. If you choose Select, the word closest to the insertion point is selected when
you double-tap. To increase or decrease the selection, do a two-finger scrub to dismiss
the pop-up menu, then pinch.
Cut, copy, or paste. Set the rotor to Edit, select the text, swipe up or down to choose
Cut, Copy, or Paste, then double-tap.
Undo. Shake iPad, swipe left or right to choose the action to undo, then double-tap.
Enter an accented character. In standard typing style, select the plain character, then
double-tap and hold until you hear a sound indicating alternate characters have
appeared. Drag left or right to select and hear the choices. Release your finger to enter
the current selection. In touch typing style, touch and hold a character until the alternate
characters appear.
Change the keyboard language. Set the rotor to Language, then swipe up or down.
Choose “default language” to use the language specified in Language & Region settings.
The Language rotor item appears only if you select more than one language in Settings >
General > Accessibility > VoiceOver > Speech.
Write with your finger
Handwriting mode lets you enter text by writing characters on the screen with your finger.
In addition to normal text entry, use handwriting mode to enter your iPad passcode
silently or open apps from the Home screen.
Enter handwriting mode. Use the rotor to select Handwriting. If Handwriting isnʼt in the
rotor, go to Settings > General > Accessibility > VoiceOver > Rotor, then add it.
Choose a character type. Swipe up or down with three fingers to choose lowercase,
numbers, uppercase, or punctuation.
Hear the selected character type. Tap with three fingers.
Enter a character. Trace the character on the screen with your finger.
Enter an alternate character. To use an alternate character (a character with an accent
or umlaut, for example), write the character, then swipe up or down with two fingers until
you hear the type of character you want.
Enter a space. Swipe right with two fingers.
Go to a new line. Swipe right with three fingers.
Delete the character before the insertion point. Swipe left with two fingers.
Select an item on the Home screen. Start writing the name of the item. If there are
multiple matches, continue to spell the name until itʼs unique, or swipe up or down with
two fingers to choose from the current matches.
Enter your passcode silently. Set the rotor to Handwriting on the passcode screen, then
write the characters of your passcode.
Use a table index to skip through a long list. Select the table index to the right of the
table (for example, next to your Contacts list or in the VoiceOver Item Chooser), then
write the letter.
Set the rotor to a web browsing element type. Write the first letter of a page element
type. For example, write “l” to have up or down swipes skip to links, or “h” to skip to
headings.
Exit handwriting mode. Do a two-finger scrub, or set the rotor to a different selection.
Type onscreen braille
If you turn on Braille Screen Input, you can use your fingers to enter 6-dot or contracted
braille directly on the iPad screen. Enter braille with iPad lying flat in front of you (tabletop
mode), or hold iPad with the screen facing away so your fingers curl back to tap the
screen (screen away mode).
Turn on Braille Screen Input. Use the rotor to select Braille Screen Input. If you donʼt
find it in the rotor, go to Settings > General > Accessibility > VoiceOver > Rotor, then add
it.
Enter braille. Place iPad flat in front of you or hold it with the screen facing away, then
tap the screen with one or several fingers at the same time.
Adjust entry dot positions. To move the entry dots to match your natural finger
positions, tap and lift your right three fingers all at once to position dots 4, 5, and 6,
followed immediately by your left three fingers for dots 1, 2, and 3.
Switch between 6-dot and contracted braille. Swipe to the right with three fingers. To
set the default, go to Settings > General > Accessibility > VoiceOver > Braille > Braille
Screen Input.
Enter a space. Swipe right with one finger. (In screen away mode, swipe to your right.)
Delete the previous character. Swipe left with one finger.
Move to a new line (typing). Swipe right with two fingers.
Cycle through spelling suggestions. Swipe up or down with one finger.
Select an item on the Home screen. Start entering the name of the item. If there are
multiple matches, continue to spell the name until it is unique, or swipe up or down with
one finger to cycle through match suggestions.
Open the selected app. Swipe right with two fingers.
Lock the screen orientation. Swipe up or down with three fingers.
Use Exploring Mode. To have iPad read dots aloud as they are tapped and released, tap
and hold dots, then wait for the timer tones and announcement.
Turn braille contractions on or off. Swipe to the right with three fingers.
Translate immediately (when contractions are enabled). Swipe down with two fingers.
Switch to the next keyboard. Swipe up with two fingers.
Turn off Braille Screen Input. Do a two-finger scrub, or set the rotor to another setting.
Use VoiceOver with an Apple Wireless Keyboard
You can control VoiceOver using an Apple Wireless Keyboard paired with iPad. See Use
an Apple Wireless Keyboard. You activate VoiceOver commands on the Apple Wireless
Keyboard with keyboard shortcuts.
You can use VoiceOver Help to learn the keyboard layout and the actions associated with
various key combinations. VoiceOver Help speaks keys and keyboard commands as you
type them, without performing the associated action.
Choose the modifier keys. Go to Settings > General > Accessibility > VoiceOver >
Modifier Keys. You can choose the Control-Option key combination or the Caps Lock key,
abbreviated as “VO” in the following list.
VoiceOver keyboard commands
VO = Control-Option
Turn on VoiceOver Help: VO–K
Turn off VoiceOver Help: Escape
Select the next or previous item: VO–Right Arrow or VO–Left Arrow
Double-tap to activate the selected item: VO–Space bar
Press the Home button: VO–H
Touch and hold the selected item: VO–Shift–M
Move to the status bar: VO–M
Read from the current position: VO–A
Read from the top: VO–B
Pause or resume reading: Control
Copy the last spoken text to the clipboard: VO–Shift–C
Search for text: VO–F
Mute or unmute VoiceOver: VO–S
Open the notifications screen: Fn–VO–Up Arrow
Open Control Center: Fn–VO–Down Arrow
Open the Item Chooser: VO–I
Change the label of the selected item: VO–/
Double-tap with two fingers: VO–”-”
Swipe up or down: VO–Up Arrow or VO–Down Arrow
Adjust the rotor: VO–Command–Left Arrow or VO–Command–Right Arrow
Adjust the setting specified by the rotor: VO–Command–Up Arrow or VO–Command–
Down Arrow
Turn the screen curtain on or off: VO–Shift–F11
Return to the previous screen: Escape
Switch apps: Command–Tab or Command–Shift–Tab
Quick Nav
Turn on Quick Nav to control VoiceOver using the arrow keys.
Turn Quick Nav on or off: Left Arrow–Right Arrow
Select the next or previous item: Right Arrow or Left Arrow
Select the next or previous item specified by the rotor: Up Arrow or Down Arrow
Select the first or last item: Control–Up Arrow or Control–Down Arrow
Tap an item: Up Arrow–Down Arrow
Scroll up, down, left, or right: Option–Up Arrow, Option–Down Arrow, Option–Left
Arrow, or Option–Right Arrow
Adjust the rotor: Up Arrow–Left Arrow or Up Arrow–Right Arrow
Single-key Quick Nav for web browsing
When you view a webpage with Quick Nav on, you can use the following keys on the
keyboard to navigate the page quickly. Typing the key moves to the next item of the
indicated type. To move to the previous item, hold the Shift key as you type the letter.
Turn on Single-key Quick Nav: VO-Q
Heading: H
Link: L
Text field: R
Button: B
Form control: C
Image: I
Table: T
Static text: S
ARIA landmark: W
List: X
Item of the same type: M
Level 1 heading: 1
Level 2 heading: 2
Level 3 heading: 3
Level 4 heading: 4
Level 5 heading: 5
Level 6 heading: 6
Text editing
Use these commands (with Quick Nav turned off) to work with text. VoiceOver reads the
text as you move the insertion point.
Go forward or back one character: Right Arrow or Left Arrow
Go forward or back one word: Option–Right Arrow or Option–Left Arrow
Go up or down one line: Up Arrow or Down Arrow
Go to the beginning or end of the line: Command–Left Arrow or Command–Down
Arrow
Go to the beginning or end of the paragraph: Option–Up Arrow or Option–Down Arrow
Go to the previous or next paragraph: Option–Up Arrow or Option–Down Arrow
Go to the top or bottom of the text field: Command–Up Arrow or Command–Down
Arrow
Select text as you move: Shift + any of the insertion point movement commands
above
Select all text: Command–A
Copy, cut, or paste the selected text: Command–C, Command–X, or Command–V
Undo or redo last change: Command–Z or Shift–Command–Z
Support for braille displays
You can use a Bluetooth braille display to read VoiceOver output, and a braille display
with input keys and other controls to control iPad when VoiceOver is turned on. For a list
of supported braille displays, go to the Braille Displays for iOS website.
Connect a braille display. Turn on the display, then go to Settings > Bluetooth and turn
on Bluetooth. Then, go to Settings > General > Accessibility > VoiceOver > Braille and
choose the display.
Adjust Braille settings. Go to Settings > General > Accessibility > VoiceOver > Braille,
where you can:
Choose contracted, uncontracted 8-dot, or uncontracted 6-dot braille input or output
Turn on the status cell and choose its location
Turn on Nemeth code for mathematical equations
Display the onscreen keyboard
Choose to have the page turned automatically when panning
Change the braille translation from Unified English
Change the alert display duration
Output closed captions in Braille during media playback. Go to Settings > General >
Accessibility > VoiceOver > Verbosity, then choose Braille or Speech and Braille.
For information about common braille commands for VoiceOver navigation, and for
information specific to certain displays, see the Apple Support article Common braille
commands for VoiceOver navigation using iPhone, iPad, and iPod touch.
Set the language for VoiceOver. Go to Settings > General > Language & Region.
If you change the language for iPad, you may need to reset the language for VoiceOver
and your braille display.
You can set the leftmost or rightmost cell of your braille display to provide system status
and other information. For example:
Announcement History contains an unread message
The current Announcement History message hasnʼt been read
VoiceOver speech is muted
The iPad battery is low (less than 20% charge)
iPad is in landscape orientation
The screen display is turned off
The current line contains additional text to the left
The current line contains additional text to the right
Set the leftmost or rightmost cell to display status information. Go to Settings >
General > Accessibility > VoiceOver > Braille > Status Cell, then tap Left or Right.
See an expanded description of the status cell. On your braille display, press the
status cellʼs router button.
Read PDFs
VoiceOver can read detailed information—such as forms, tables, and lists—in PDF
documents in the Files and iBooks apps.
Read math equations
VoiceOver can read aloud math equations encoded using:
MathML on the web
MathML or LaTeX in iBooks Author
Hear an equation. Have VoiceOver read the text as usual. VoiceOver says “math” before
it starts reading an equation.
Explore the equation. Double-tap the selected equation to display it full screen and
move through it one element at a time. Swipe left or right to read elements of the
equation. Use the rotor to select Symbols, Small Expressions, Medium Expressions, or
Large Expressions, then swipe up or down to hear the next element of that size. You can
continue to double-tap the selected element to “drill down” into the equation to focus on
the selected element, then swipe left or right, up or down to read one part at a time.
Equations read by VoiceOver can also be output to a braille device using Nemeth code,
as well as the codes used by Unified English Braille, British English, French, and Greek.
See Support for braille displays.
Use VoiceOver with Safari
Search the web. Select the search field, double-tap to invoke the keyboard, enter your
search, then swipe right or left to move down or up the list of suggested search phrases.
Then double-tap the screen to search the web using the selected phrase.
Skip to the next page element of a particular type. Set the rotor to the element type,
then swipe up or down.
Set the rotor options for web browsing. Go to Settings > General > Accessibility >
VoiceOver > Rotor. Tap to select or deselect options, or drag
up or down to reposition
an item.
Skip images while navigating. Go to Settings > General > Accessibility > VoiceOver >
Navigate Images. You can choose to skip all images or only those without descriptions.
Reduce page clutter for easier reading and navigation. Select the Reader item in the
Safari address field (not available for all pages).
If you pair an Apple Wireless Keyboard with iPad, you can use single-key Quick Nav
commands to navigate webpages. See Use VoiceOver with an Apple Wireless Keyboard.
Use VoiceOver with Maps
You can use VoiceOver to explore a region, browse points of interest, follow roads, zoom
in or out, select a pin, or get information about a location.
Control how the map tracks your current location. Double-tap
until you hear the
tracking option you want:
Tracking on: The map automatically centers on your current location.
Tracking on with heading: The map automatically centers on your current location and
rotates so that the heading youʼre facing is at the top of the screen. In this mode, iPad
speaks street names and points of interest as you approach them.
Tracking off: The map doesnʼt automatically center on your current location.
Explore the map. Drag your finger around the screen, or swipe left or right to move to
another item.
Zoom in or out. Select the map, set the rotor to Zoom, then swipe down or up with one
finger.
Pan the map. Swipe with three fingers.
Browse visible points of interest. Set the rotor to Points of Interest, then swipe up or
down with one finger.
Follow a road. Hold your finger down on the road, wait until you hear “pause to follow,”
then move your finger along the road while listening to the guide tone. The pitch
increases when you stray from the road.
Select a pin. Touch a pin, or swipe left or right to select the pin.
Get information about a location. With a pin selected, double-tap to display the
information flag. Swipe left or right to select the More Info button, then double-tap to
display the information page.
Edit videos with VoiceOver
You can use VoiceOver gestures to trim Camera videos.
Trim a video. While viewing a video in Photos, double-tap the screen to display the video
controls, then select the beginning or end of the trim tool. Then swipe up to drag to the
right, or swipe down to drag to the left. VoiceOver announces the amount of time the
current position will trim from the recording. To complete the trim, select Trim, then
double-tap.
Zoom
Many apps let you zoom in or out on specific items. For example, you can double-tap or
pinch to look closer in Photos or expand webpage columns in Safari. Thereʼs also a
general Zoom feature that lets you magnify the screen no matter what youʼre doing. You
can zoom the entire screen (Full Screen Zoom) or zoom part of the screen in a resizable
window and leave the rest of the screen unmagnified (Window Zoom). And, you can use
Zoom together with VoiceOver.
Turn Zoom on or off. Go to Settings > General > Accessibility, then turn Zoom on or off.
Or use accessibility shortcuts.
Zoom in or out. With Zoom turned on, double-tap the screen with three fingers.
Adjust the magnification. Double-tap with three fingers, then drag up or down. This
gesture is similar to a double-tap, except you donʼt lift your fingers after the second tap—
instead, drag your fingers on the screen. You can also triple-tap with three fingers, then
drag the Zoom Level slider in the zoom controls that appear. To limit the maximum
magnification, go to Settings > General > Accessibility > Zoom, then drag the Maximum
Zoom Level slider all the way to the left.
Pan to see more. Drag the screen with three fingers. Or hold your finger near the edge
of the screen to pan to that side. Move your finger closer to the edge to pan more quickly.
Or, if you have detached the Zoom Controller, drag it.
Switch between Full Screen Zoom and Window Zoom. Triple-tap with three fingers,
then tap Window Zoom or Full Screen Zoom in the zoom controls that appear. To choose
the mode thatʼs used when you turn on Zoom, go to Settings > General > Accessibility >
Zoom > Zoom Region.
Resize the zoom window (Window Zoom). Triple-tap with three fingers, tap Resize
Lens, then drag any of the round handles that appear.
Move the zoom window (Window Zoom). Drag the handle at the bottom of the zoom
window.
Show the zoom controller. Go to Settings > General > Accessibility > Zoom, then turn
on Show Controller, or triple-tap with three fingers, then choose Show Controller. Then
you can double-tap the floating Zoom Controls button to zoom in or out, single-tap the
button to display the zoom controls, or drag it to pan. To move the Zoom Controls button,
touch and hold the button, then drag it to a new location. To adjust the transparency of
the zoom controller, go to Settings > General > Accessibility > Zoom > Idle Visibility.
Have Zoom track your selections or the text insertion point. Go to Settings >
General > Accessibility > Zoom, then turn on Follow Focus. Then, for example, if you use
VoiceOver, the zoom window magnifies each element on the screen as you select it.
Zoom in on your typing without magnifying the keyboard. Go to Settings > General >
Accessibility > Zoom, then turn on Follow Focus. When you zoom in while typing (in
Messages or Notes, for example), the area immediately around the text you type is
magnified while all of the keyboard remains visible. Turn on Smart Typing, and the entire
window (except the keyboard) is magnified.
Display the magnified part of the screen in grayscale or inverted color. Go to
Settings > General > Accessibility > Zoom > Zoom Filter, then choose an option. Or
triple-tap with three fingers, then tap Choose Filter in the zoom controls that appear.
While using Zoom with an Apple Wireless Keyboard, the screen image follows the
insertion point, keeping it in the center of the display. See Use an Apple Wireless
Keyboard.
Magnifier
Turn your iPad into a magnifying glass to zoom in on objects near you.
Set up Magnifier. Go to Settings > General > Accessibility > Magnifier, then turn on
Magnifier. This adds Magnifier to accessibility shortcuts.
Turn on Magnifier. Use accessibility shortcuts.
Adjust the magnification level. Drag the Zoom Level slider.
Add more light. Tap
to turn the flashlight on or off.
Lock the focus. Tap
. Tap again to unlock the focus.
Freeze the frame. Tap
. To adjust the magnification, drag the Zoom Level slider. To
save the image, touch and hold the image, then tap Save Image. To unfreeze the frame,
tap
again.
Apply color filters. Tap
. Tap the different color filters to preview their effects. To
adjust the brightness and contrast, drag the sliders. To invert the colors, tap
the selected filter and return to Magnifier screen, tap
. To apply
again.
Turn off Magnifier. Click the Home button.
Display accommodations
If you have color blindness or other vision challenges, you can customize the display
settings to make the screen easier to see.
Automatically adjust the screen brightness. Go to Settings > General > Accessibility >
Display Accommodations, then turn on Auto-Brightness. iPad adjusts the screen
brightness for current light conditions using the built-in ambient light sensor.
Invert the screen colors. Go to Settings > General > Accessibility > Display
Accommodations > Invert Colors, then choose Smart Invert or Classic Invert. Or use
accessibility shortcuts. Smart Invert Colors reverses the colors of the display, except for
images, media, and some apps that use dark color styles.
Apply color filters or grayscale. Go to Settings > General > Accessibility > Display
Accommodations > Color Filters, then turn on Color Filters. Or, use accessibility
shortcuts. Tap a filter to apply it. To adjust the intensity or hue, drag the sliders.
Reduce the intensity of bright colors. Go to Settings > General > Accessibility >
Display Accommodations, then turn on Reduce White Point.
You can also apply these effects to only the contents of the zoom window. See Zoom.
Set the maximum frame rate of the display to 60 frames per second. (on supported
models) Go to Settings > General > Accessibility > Display Accommodations, then turn
on Limit Frame Rate.
Speak Selection, Speak Screen, and Typing Feedback
Even if VoiceOver is turned off, you can have iPad speak selected text or the entire
screen. iPad can also provide feedback and speak text corrections and suggestions as
you type.
Go to Settings > General > Accessibility > Speech, where you can:
Turn on Speak Selection.
Turn on Speak Screen.
Choose whether content is highlighted as itʼs spoken.
Turn on and configure Typing Feedback; you can configure typing feedback for
software and hardware keyboards and choose to have iPad speak each character,
entire words, auto-corrections, auto-capitalizations, and typing predictions.
Adjust the speaking rate.
Hear selected text. Select the text, then tap Speak.
Hear screen content. Swipe down with two fingers from the top of the screen. Use the
controls that appear to pause speaking or adjust the rate.
Ask Siri. Say “speak screen.”
Hear typing feedback. Start typing.
Hear typing predictions. Go to Settings > General > Keyboards, and turn on Predictive.
Then, go to Settings > General > Accessibility > Speech > Typing Feedback, and turn on
Hold to Speak Predictions. Touch and hold a prediction to hear it spoken.
Large, bold, and high-contrast text
Display larger text in apps such as Settings, Calendar, Contacts, Mail, Messages,
and Notes. Go to Settings > General > Accessibility > Larger Text, then turn on Larger
Accessibility Sizes. Or, use accessibility shortcuts.
Display bolder text on iPad. Go to Settings > General > Accessibility, then turn on Bold
Text.
Increase text contrast where possible. Go to Settings > General > Accessibility >
Increase Contrast. You can choose to reduce transparency and darken colors.
Button shapes
iPad can underline text buttons so theyʼre easier to see.
Emphasize buttons. Go to Settings > General > Accessibility, then turn on Button
Shapes.
Reduce motion
If you have sensitivity to motion effects or screen movement on your iPad, you can stop
or reduce the movement of some screen elements, such as:
Parallax effect of wallpaper, apps, and alerts
Screen transitions
Siri animations
Typing autocompletion
Animated effects in Messages
Reduce motion. Go to Settings > General > Accessibility > Reduce Motion.
Manually play effects in Messages. If you donʼt want to automatically play bubble and
full-screen effects in Messages, turn off Auto-Play Message Effects. To manually play
effects in Messages, tap Replay below the message bubble.
On/off switch labels
To make it easier to distinguish whether a setting is on or off, you can have iPad show an
additional label on on/off switches.
Add switch-setting labels. Go to Settings > General > Accessibility, then turn on the
On/Off Labels switch.
Assignable tones
You can assign distinctive ringtones to people in your contacts list for audible FaceTime
caller ID. You can also assign distinct tones to alert you of a variety of other events,
including new voicemail, new mail, sent mail, and reminders. See Sounds and silence.
You can purchase ringtones from the iTunes Store on iPad. See Find music, movies, TV
shows, and more.
Audio descriptions
If you have a video that includes audio descriptions of scenes, iPad can play the
descriptions for you.
Hear audio descriptions. Go to Settings > General > Accessibility > Audio Descriptions,
then turn on Prefer Audio Descriptions.
Interaction
Switch Control
Switch Control overview
If you have a motor impairment, Switch Control lets you control iPad using one or more
connected physical switches. Use any of several methods to perform actions such as
selecting, tapping, dragging, typing, invoking multitasking options on devices that
support them, and even free-hand drawing. You use a switch to select an item or location
on the screen, and then use the same (or different) switch to choose an action to perform
on that item or location. Three basic methods are:
Item scanning (default), which highlights different items on the screen until you select
one.
Point scanning, which lets you use scanning crosshairs to pick a screen location.
Manual selection, which lets you move from item to item on demand (requires
multiple switches).
Whichever method you use, when you select an individual item (rather than a group), a
menu appears so you can choose how to act on the selected item (tap, drag, or pinch, for
example).
If you use multiple switches, you can set up each switch to perform a specific action and
customize your item selection method. For example, instead of automatically scanning
screen items, you can set up switches to move to the next or previous item on demand.
You can adjust the behavior of Switch Control in a variety of ways, to suit your specific
needs and style.
Add a switch and turn on Switch Control
You can use the following as a switch:
An external adaptive switch: Choose a Bluetooth switch or a Made For iPhone switch
that plugs into the lightning port.
The iPad screen: Tap the screen to trigger the switch.
The iPad front-facing camera: Use head movements while facing the camera to
trigger the switch.
Add a switch and choose its action. Go to Settings > General > Accessibility > Switch
Control > Switches. If you use only one switch, it is your Select Item switch by default.
If youʼre adding an external switch, you need to connect it to iPad before it will appear in
the list of available switches. Follow the instructions that came with the switch. If it
connects using Bluetooth, you need to pair it with iPad—turn on the switch, go to
Settings > Bluetooth, tap the switch, then follow the onscreen instructions. For more
information, see Connect Bluetooth devices.
If you connect a Made For iPhone (MFi) switch, Switch Control sets a Select Item switch
and enables it automatically.
Turn on Switch Control. Go to Settings > General > Accessibility > Switch Control. Or,
use accessibility shortcuts.
Scan the keyboard. VoiceOver scans the onscreen keyboard row by row, including the
suggestions above the keyboard. To control how the keyboard is navigated, go to
Settings > General > Accessibility > Switch Control, then turn the settings below
Keyboard on or off.
Turn off Switch Control. Use any scanning method to select and tap Settings >
General > Accessibility > Switch Control, then turn off Switch Control. Or, use
accessibility shortcuts.
Basic techniques
Whether you use item scanning or point scanning, the Switch Control basics are the
same.
Select an item. Trigger your Select Item switch when the item is highlighted (item
scanning) or under the crosshairs (point scanning).
Perform an action on the selected item. Choose a command from the control menu
that appears when you select the item. The layout of the menu depends on how you
configure tap behavior. (To choose an option, go to Settings > General > Accessibility >
Switch Control > Tap Behavior.)
With Default on: The control menu usually includes only the Tap button and the More
button (two dots at the bottom). If youʼre in a scrollable area of the screen, a Scroll
button also appears. To tap the highlighted item, trigger your Select Item button when
Tap is highlighted. To see additional action buttons, choose More at the bottom of the
menu. If you have multiple switches, you can set one up specifically for tapping.
With Auto Tap on: To tap the item, do nothing—the item is automatically tapped when
the Auto Tap interval expires (0.75 seconds if you havenʼt changed it). To see the
control menu, trigger your Select Item button before the Auto Tap interval expires.
The control menu skips the Tap button and goes right to the full set of action buttons.
With Always Tap on: Tap to select the highlighted item rather than display the control
menu. Wait until the end of the scan cycle, then tap a button to display the control
menu.
Note: Always Tap applies only when you choose item scanning. When point scanning,
the default behavior applies.
Work with recipes. A recipe lets you temporarily assign a special action to a switch. For
example, you can choose a recipe to turn pages in iBooks or control a game. To create,
edit, or launch a recipe, go to Settings > General > Accessibility > Switch Control >
Recipes.
Dismiss the Scanner menu without choosing an action. Tap while the original item is
highlighted and all the icons in the control menu are dimmed. The menu goes away after
cycling the number of times you specify in Settings > General > Accessibility > Switch
Control > Loops.
Perform screen gestures. Choose Gestures from the Scanner menu.
Scroll the screen. Select an item in a scrollable part of the screen, then:
With Auto Tap off: Choose the Scroll Down button (next to the Tap button) in the
Scanner menu. Or, for additional scrolling options, choose More, then choose Scroll.
With Auto Tap on: Choose Scroll from the control menu. If many actions are available,
you might have to choose More first.
Tap the Home button. Choose Home from the Scanner menu.
Perform other hardware actions. Select any item, then choose Device from the menu
that appears. Use the menu to mimic these actions:
Double-click the Home button for multitasking
Open the notifications screen or Control Center
Press the Sleep/Wake button to lock iPad
Rotate iPad to landscape or portrait orientation
On iPad models with a side switch, flip the Side Switch to mute iPad volume
Press the volume buttons
Show the Search screen
Press and hold the Home button to summon Siri
Triple-click the Home button
Shake iPad
Take a screenshot
Swipe down from the top with two fingers to speak the screen (if you have Speak
Screen turned on)
Control media playback. Choose Media Controls from the Scanner menu to play, pause,
or go backward or forward.
Use Switch Control on another iOS device. Ensure that you sign in to iCloud with the
same Apple ID on the other iOS device, then choose the other device from the menu.
Item scanning
Item scanning alternately highlights each item or group of items on the entire screen until
you trigger your Select Item switch. If there are many items, Switch Control highlights
them in groups. When you select a group, highlighting continues with the items in the
group. When you select a unique item, scanning stops and the control menu appears.
Item scanning is the default when you first turn on Switch Control.
You can choose from three scanning styles—auto scanning, manual scanning, and
single-switch step scanning. Auto scanning automatically highlights items, one after the
other. With manual scanning, you use one switch to highlight an item and another to
activate it. Single-switch step scanning uses a switch to move the highlight from item to
item. If you take no action after a period of time, the highlighted item activates.
Select an item or enter a group. Watch (or listen) as items are highlighted. When the
item you want to control (or the group containing the item) is highlighted, trigger your
Select Item switch. Work your way down the hierarchy of items until you select the
individual item you want to control.
Back out of a group. Trigger your Select Item switch when the dashed highlight around
the group or item appears.
Dismiss the control menu without performing an action. Trigger your Select Item
switch when the item itself is highlighted. Or choose Escape from the control menu.
Hear the names of items as they are highlighted. Go to Settings > General >
Accessibility > Switch Control, then turn on Speech. Or choose Settings from the control
menu, then choose Speech On.
Slow down or speed up the scanning. Go to Settings > General > Accessibility > Switch
Control > Auto Scanning Time.
Point scanning
Point scanning lets you select an item on the screen by pinpointing it with scanning
crosshairs.
Switch to point scanning. Use item scanning to choose Point Mode from the control
menu. The vertical crosshair appears when you close the menu.
Select an item. Trigger your Select Item switch when the item you want is within the
broad, horizontal scanning band, then trigger again when the fine scanning line is on the
item. Repeat for vertical scanning.
Refine your selection point. Choose Refine Selection from the control menu.
Return to item scanning. Choose Item Mode from the control menu.
Settings and adjustments
Adjust basic settings. Go to Settings > General > Accessibility > Switch Control, where
you can:
Add switches and specify their function
Choose, create, and edit recipes
Choose a scanning style
Adjust how rapidly items are scanned
Set scanning to pause on the first item in a group
Choose how many times to cycle through the screen before hiding Switch Control
Choose a tap behavior and set the interval for performing a second switch action to
show the control menu
Choose whether Switch Control resumes scanning at an item you tap or from the
beginning
Set whether a movement action is repeated when you press and hold a switch, and
how long to wait before repeating
Add another action to a switch by pressing and holding the switch for a long duration
Choose which items appear in menus and the order in which they appear
Set whether and how long you need to hold a switch down before itʼs accepted as a
switch action
Have Switch Control ignore accidental repeated switch triggers
Adjust the point scanning speed
Turn on sound effects or have items read aloud as they are scanned
Choose what to include in the Switch Control menu
Set whether items should be grouped while item scanning
Make the selection cursor larger or a different color
Save custom gestures to the control menu (in Gestures > Saved)
Fine-tune Switch Control. Choose Settings from the control menu to:
Adjust scanning speed
Change the location of the control menu
Turn sound or speech accompaniment on or off
Turn off groups to scan items one at a time
AssistiveTouch
AssistiveTouch helps you use iPad if you have difficulty touching the screen or pressing
the buttons. You can use AssistiveTouch without any accessory to perform gestures that
are difficult for you. You also can use a compatible adaptive accessory (such as a
joystick) together with AssistiveTouch to control iPad. To configure the AssistiveTouch
menu, go to Settings > General > Accessibility > AssistiveTouch.
AssistiveTouch lets you perform the following actions and more just by tapping (or the
equivalent on your accessory):
Open the AssistiveTouch menu
Go to the Home screen
Double-tap
Perform multifinger gestures
Summon Siri
Access Control Center, notifications, Lock screen, or App Switcher
Adjust volume on iPad
Shake iPad
Take a screenshot
Use Apple Pay (on models that support Apple Pay)
Speak screen
Control Analytics
Restart iPad
Turn on AssistiveTouch. Tell Siri “turn on AssistiveTouch,” go to Settings > General >
Accessibility > AssistiveTouch, or use Accessibility Shortcut. When AssistiveTouch is on,
the floating menu button appears on the screen.
Add more actions to the AssistiveTouch menu. Go to Settings > General >
Accessibility > AssistiveTouch > Customize Top Level Menu. The menu can have up to
eight actions.
Show or hide the AssistiveTouch menu. Tap the floating menu button, or click the
secondary button on your accessory.
Show the Home screen. Tap the menu button, then tap Home.
Lock or rotate the screen, adjust iPad volume, or simulate shaking iPad. Tap the
menu button, then tap Device.
Perform a swipe or drag that uses 2, 3, 4, or 5 fingers. Tap the menu button, tap
Device > More > Gestures, then tap the number of digits needed for the gesture. When
the corresponding circles appear on the screen, swipe or drag in the direction required
by the gesture. When you finish, tap the menu button.
Perform a pinch gesture. Tap the menu button, tap Custom, then tap Pinch. When the
pinch circles appear, touch anywhere on the screen to move the pinch circles, then drag
them in or out to perform a pinch gesture. When you finish, tap the menu button.
Create your own gesture. You can add your own favorite gestures to the control menu
(for example, touch and hold or two-finger rotation). Tap the menu button, tap Custom,
then tap an empty gesture placeholder. Or go to Settings > General > Accessibility >
AssistiveTouch > Create New Gesture.
Example 1: To create the rotation gesture, go to Settings > General > Accessibility >
AssistiveTouch > Create New Gesture. On the gesture recording screen that asks you to
touch to create a gesture, rotate two fingers on the iPad screen around a point between
them. (You can do this with a single finger or stylus—just create each arc separately, one
after the other.) If it doesnʼt turn out quite right, tap Cancel, then try again. When it looks
right, tap Save, then give the gesture a name—maybe “Rotate 90.” Then, to rotate the
view in Maps, for example, open Maps, tap the AssistiveTouch menu button, and choose
Rotate 90 from Custom. When the blue circles representing the starting finger positions
appear, drag them to the point around which you want to rotate the map, then release.
You might want to create several gestures with different degrees of rotation.
Example 2: Letʼs create the touch-and-hold gesture that you use to start rearranging
icons on your Home screen. This time, on the gesture recording screen, touch and hold
your finger in one spot until the recording progress bar reaches halfway, then lift your
finger. Be careful not to move your finger while recording, or the gesture will be recorded
as a drag. Tap Save, then name the gesture. To use the gesture, tap the AssistiveTouch
menu button, then choose your gesture from Custom. When the blue circle representing
your touch appears, drag it over a Home screen icon and release.
If you record a sequence of taps or drags, theyʼre all played back at the same time. For
example, using one finger or a stylus to record four separate, sequential taps at four
locations on the screen creates a simultaneous four-finger tap.
Exit a menu without performing a gesture. Tap anywhere outside the menu. To return
to the previous menu, tap the arrow in the middle of the menu.
Assign custom actions to the menu button. By default, a single tap on the menu button
opens the menu. To assign other actions to the menu button, go to Settings > General >
Accessibility > AssistiveTouch. Below Custom Actions, you can assign different actions to
a single tap, double tap, or long press.
Reduce the visibility of the menu button when not in use. Go to Settings > General >
Accessibility > AssistiveTouch > Idle Opacity, then drag the slider.
Move the menu button. Drag it anywhere along the edge of the screen.
Touch Accommodations
If you have trouble using the touchscreen or Home button, use Touch Accommodations
to change how your device responds to your touch.
Choose how long you must touch the screen before a touch is recognized. You can
configure iPad to respond only to touches of a certain duration. Go to Settings >
General > Accessibility > Touch Accommodations, turn on Hold Duration, then use the
Gesture Delay plus and minus buttons to choose a duration (the default is 0.10 seconds).
Choose the duration in which multiple touches are treated as a single touch. If you
have trouble touching the screen just once, turn on Ignore Repeat. Then, if you touch the
screen several times quickly, iPad treats the touches as one. To change the amount of
time between touches before iPad treats them as one, go to Settings > General >
Accessibility > Touch Accommodations, turn on Ignore Repeat, then use the Gesture
Delay plus and minus buttons to adjust the timing.
Choose the location where iPad responds to the first or the last place you touch. Go
to Settings > General > Accessibility > Touch Accommodations, then choose a Tap
Assistance option (Use Initial Touch Location or Use Final Touch Location).
When you choose Use Initial Touch Location, iPad uses the location of your first tap—
when you tap an app on the Home screen, for example. Choose Use Final Touch
Location, and iPad registers the tap where you lift your finger. iPad responds to a tap
when you lift your finger within a certain period of time. Use the Gesture Delay plus and
minus buttons to adjust the timing. Your device can respond to other gestures, such as
drags, if you wait longer than the gesture delay.
Choose how iPad responds when you press and hold the Home button. Go to
Settings > General > Accessibility > Home Button, then choose Siri or Off.
Use accessibility features with Siri
Siri is often the easiest way to start using accessibility features with iPad. With Siri, you
can open apps, turn many settings on or off (for example, VoiceOver), or use Siri for what
it does best—acting as your intelligent personal assistant. Siri knows when VoiceOver is
on, so will often read more information back to you than appears on the screen. You can
also use VoiceOver to read what Siri shows on the screen.
Type to Siri. To type instead of speaking to Siri, go to General > Accessibility > Siri, then
turn on Type to Siri. After you summon Siri, interact with Siri by using the keyboard and
text field.
Widescreen keyboards
All built-in iPad apps show a larger onscreen keyboard when you rotate iPad to landscape
view. You can also type using an Apple Wireless Keyboard.
Software and hardware keyboards
If you have difficulty distinguishing characters on the iPad keyboard or manipulating a
hardware keyboard, find help by going to Settings > General > Accessibility > Keyboard.
You can adjust settings to:
Show only uppercase keys on the iPad keyboard.
Adjust the key repeat rate on hardware keyboards.
Use Sticky Keys to press and hold modifier keys, such as Command and Option, as
you press another key.
Use Slow Keys to adjust the time between when a key is pressed and when itʼs
activated.
Hearing
Made for iPhone hearing aids
If you have Made for iPhone hearing aids, you can use iPad to adjust their settings,
stream audio, or use iPad as a remote mic.
Pair with iPad. If your hearing aids arenʼt listed in Settings > General > Accessibility >
MFi Hearing Aids, you need to pair them with iPad. To start, open the battery door on
each hearing aid. Next, on iPad, go to Settings > Bluetooth, and make sure Bluetooth is
turned on. Then, go to Settings > General > Accessibility > MFi Hearing Aids. Close the
battery doors on your hearing aids and wait until their name appears in the list of devices
(this could take a minute). When the name appears, tap it and respond to the pairing
request.
When pairing is finished, you hear a series of beeps and a tone, and a checkmark
appears next to the hearing aids in the Devices list. Pairing can take as long as 60
seconds—donʼt try to stream audio or otherwise use the hearing aids until pairing is
finished.
You should only need to pair once (and your audiologist might do it for you). After that,
each time you turn your hearing aids back on, they reconnect to iPad.
Turn on Hearing Aid Compatibility. Hearing Aid Compatibility may reduce interference
and improve audio quality with some hearing aid models. To turn it on, go to Settings >
General > Accessibility > Hearing Aid Compatibility.
Adjust hearing aid settings and view status. Go to Settings > General > Accessibility >
MFi Hearing Aids, or use accessibility shortcuts. Hearing aid settings appear only after
you pair your hearing aids with iPad.
To access shortcuts from the Lock screen, go to Settings > General > Accessibility > MFi
Hearing Aids, then turn on Control on Lock Screen. From the Lock screen, you can:
Check hearing aid battery status.
Adjust ambient microphone volume and equalization.
Choose which hearing aids (left, right, or both) receive streaming audio.
Control Live Listen.
Stream audio to your hearing aids. To stream audio from Siri, Music, Videos, and more,
see Connect Bluetooth devices.
Use iPad as a remote microphone. You can use Live Listen to stream sound from the
microphone in iPad to your hearing aids. This can help you hear better in some situations
—for example, when having a conversation in a noisy environment. Triple-click the Home
button, choose Hearing Devices, tap Start Live Listen, then position iPad near the sound
source.
Use your hearing aids with more than one iOS device. If you pair your hearing aids
with more than one iOS device (both iPad and iPhone, for example), the connection for
your hearing aids automatically switches from one to the other when you do something
that generates audio on the other device, or when you receive a phone call on iPhone.
Changes you make to hearing aid settings on one device are automatically sent to your
other iOS devices. To enable this feature, sign in to iCloud using the same Apple ID on all
the devices, and connect all the devices to the same Wi-Fi network.
Mono audio and balance
Mono Audio combines the sound from the left and right channels into a mono signal
played on both channels. This way you can hear everything with either ear, or through
both ears with one channel set louder.
Turn on Mono Audio. Go to Settings > General > Accessibility > Mono Audio.
Adjust the balance. Go to Settings > General > Accessibility, then drag the Left Right
Stereo Balance slider.
Subtitles and closed captions
The Videos app includes an Alternate Track button
you can tap to choose subtitles
and captions offered by the video youʼre watching. Standard subtitles and captions are
usually listed, but if you prefer special accessible captions, such as subtitles for the deaf
and hard of hearing (SDH), you can set iPad to list them instead, if theyʼre available.
Prefer accessible subtitles and closed captions for SDH. Go to Settings > General >
Accessibility > Subtitles & Captioning, then turn on Closed Captions + SDH. This also
turns on subtitles and captions in the Videos app.
Choose from available subtitles and captions. Tap
while watching a video in
Videos.
Customize your subtitles and captions. Go to Settings > General > Accessibility >
Subtitles & Captioning > Style, where you can choose an existing caption style or create a
new style based on your choice of:
Font, size, and color
Background color and opacity
Text opacity, edge style, and highlight
Note: Not all videos include subtitles or closed captions.
LED Flash for Alerts
If you canʼt hear the sounds that announce incoming calls and other alerts, iPad can flash
its LED (next to the camera lens on the back of iPad). The LED flashes only if iPad is
locked.
Tip: LED Flash for Alerts is a useful feature for anyone who might miss the tones
associated with calls and other alerts in a noisy environment.
Turn on LED Flash for Alerts. Go to Settings > General > Accessibility > LED Flash for
Alerts. By default, the LED flashes even if iPad is in silent mode.
Prevent LED flashes when iPad is in silent mode. Turn off Flash on Silent.
Guided Access
Guided Access helps an iPad user stay focused on a task. Guided Access temporarily
restricts iPad to a single app and lets you control which app features are available. You
can:
Disable areas of the screen that arenʼt relevant to a task, or areas where an accidental
gesture might cause a distraction
Disable the iPad hardware buttons
Limit how long someone can use the app
Set up Guided Access. Go to Settings > General > Accessibility > Guided Access, then
turn on Guided Access. You can:
Tap Passcode Settings to set a passcode that controls Guided Access and prevents
someone from leaving a session; or turn on Touch ID as a way to end Guided Access
Tap Time Limits to set a sound or have the remaining Guided Access time spoken
before the time ends
Set whether other accessibility shortcuts are available during a session
Start a Guided Access session. Open the app you want to use, then tell Siri “Turn on
Guided Access” or use accessibility shortcuts. Adjust the following settings for the
session, then tap Start:
Disable app controls and areas of the app screen: Draw a circle or rectangle around
any part of the screen you want to disable. Drag the mask into position or use the
handles to adjust its size.
Enable the Sleep/Wake or volume buttons: Tap Hardware Buttons Options.
Prevent iPad from switching from portrait to landscape or from responding to other
motions: Tap Hardware Buttons Options, then turn off Motion.
Prevent typing: Tap Hardware Buttons Options, then turn off Keyboards.
Ignore all screen touches: Turn off Touch at the bottom of the screen.
Set a session time limit: Tap Time Limit Options.
End the session. Double-click the Home button, then unlock with Touch ID (if enabled).
Or triple-click the side button, then enter the Guided Access passcode.
Accessibility in macOS
Take advantage of the accessibility features in macOS when you use iTunes to sync
information and content from your iTunes library to iPad. For more information, see
iTunes Help on your computer.
Safety, handling, and support
Important safety information
WARNING: Failure to follow these safety instructions could result in fire, electric
shock, injury, or damage to iPad or other property. Read all the safety information below
before using iPad.
Handling Handle iPad with care. It is made of metal, glass, and plastic and has sensitive
electronic components inside. iPad or its battery can be damaged if dropped, burned,
punctured, or crushed, or if it comes in contact with liquid. If you suspect damage to iPad
or the battery, discontinue use of iPad, as it may cause overheating or injury. Donʼt use
iPad with a cracked screen, as it may cause injury. If youʼre concerned about scratching
the surface of iPad, consider using a case or cover.
Repairing Donʼt open iPad and donʼt attempt to repair iPad yourself. Disassembling iPad
may damage it or may cause injury to you. If iPad is damaged, malfunctions, or comes in
contact with liquid, contact Apple or an Apple Authorized Service Provider. Repairs by
service providers other than Apple or an Apple Authorized Service Provider may not
involve the use of Apple genuine parts and may affect the safety and functionality of the
device. You can find more information about getting service at the iPad Repair website.
Battery Donʼt attempt to replace the iPad battery yourself. The lithium-ion battery in
iPad should be replaced by Apple or an authorized service provider. Improper
replacement or repair could damage the battery, cause overheating, or result in injury.
The battery must be recycled or disposed of separately from household waste. Donʼt
incinerate the battery. For information about battery services and recycling, go to the
Battery Service and Recycling website.
Distraction Using iPad in some circumstances may distract you and might cause a
dangerous situation (for example, avoid using headphones while riding a bicycle and
avoid typing a text message while driving a car). Observe rules that prohibit or restrict
the use of mobile devices or headphones.
Navigation Maps depends on data services. These data services are subject to change
and may not be available in all regions, resulting in maps and location-based information
that may be unavailable, inaccurate, or incomplete. Compare the information provided in
Maps to your surroundings. Use common sense when navigating. Always observe current
road conditions and posted signs to resolve any discrepancies. Some Maps features
require Location Services.
Charging Charge iPad with the included USB cable and power adapter, or with other
third-party “Made for iPad” cables and power adapters that are compatible with USB 2.0
or later, or power adapters compliant with applicable country regulations and with one or
more of the following standards: EN 301489-34, IEC 62684, YD/T 1591-2009, CNS
15285, ITU L.1000, or another applicable mobile phone power adapter interoperability
standard. Only charge with an adapter that is compliant with the applicable international
and regional safety standards, including IEC 60950. Other adapters may not meet
applicable safety standards, and charging with such adapters could pose a risk of death
or injury.
Using damaged cables or chargers, or charging when moisture is present, can cause fire,
electric shock, injury, or damage to iPad or other property. When you use the Apple USB
Power Adapter to charge iPad, make sure the USB cable is fully inserted into the power
adapter before you plug the adapter into a power outlet.
Lightning cable and connector Avoid prolonged skin contact with the connector when
the Lightning to USB Cable is connected to a power source because it may cause
discomfort or injury. Sleeping or sitting on the Lightning connector should be avoided.
Prolonged heat exposure iPad and its power adapter comply with applicable surface
temperature standards and limits. However, even within these limits, sustained contact
with warm surfaces for long periods of time may cause discomfort or injury. Use common
sense to avoid situations where your skin is in contact with a device or its power adapter
when itʼs operating or connected to a power source for long periods of time. For example,
donʼt sleep on a device or power adapter, or place them under a blanket, pillow, or your
body, when itʼs connected to a power source. Itʼs important to keep iPad and its power
adapter in a well-ventilated area when in use or charging. Take special care if you have a
physical condition that affects your ability to detect heat against the body.
Hearing loss Listening to sound at high volumes may damage your hearing. Background
noise, as well as continued exposure to high volume levels, can make sounds seem
quieter than they actually are. Turn on audio playback and check the volume before
inserting anything in your ear. For information about how to set a maximum volume limit
on iPad, see Play music. For more information about hearing loss, go to the Sound and
Hearing website.
To avoid hearing damage, use only compatible receivers, earbuds, headphones,
speakerphones, or earpieces with iPad. The headsets sold with iPhone 4s or later in
China (identifiable by dark insulating rings on the plug) are designed to comply with
Chinese standards and are only compatible with iPhone 4s and later, iPad 2 and later,
iPad Pro, iPad mini and later, and iPod touch 5th generation and later.
WARNING: To prevent possible hearing damage, do not listen at high volume levels
for long periods.
Radio frequency exposure iPad uses radio signals to connect to wireless networks. For
information about radio frequency (RF) energy resulting from radio signals, and steps you
can take to minimize exposure, go to Settings > General > About > Legal > RF Exposure,
or go to the RF Exposure website.
Radio frequency interference Observe signs and notices that prohibit or restrict the
use of mobile devices (for example, in healthcare facilities or blasting areas). Although
iPad is designed, tested, and manufactured to comply with regulations governing radio
frequency emissions, such emissions from iPad can negatively affect the operation of
other electronic equipment, causing them to malfunction. When use is prohibited, such
as while traveling in aircraft, or when asked to do so by authorities, turn off iPad, or use
airplane mode or Settings > Wi-Fi and Settings > Bluetooth to turn off the iPad wireless
transmitters.
Medical device interference iPad contains components and radios that emit
electromagnetic fields. iPad also contains magnets along the left edge of the device and
on the right side of the front glass, which may interfere with pacemakers, defibrillators, or
other medical devices. The iPad Smart Cover, iPad Pro Smart Cover, and iPad Pro
Smart Keyboard (each available separately) also contain magnets. These electromagnetic
fields and magnets may interfere with pacemakers, defibrillators, or other medical
devices. Maintain a safe distance of separation between your medical device and iPad,
the iPad Smart Cover, the iPad Pro Smart Cover, and the iPad Pro Smart Keyboard.
Consult your physician and medical device manufacturer for information specific to your
medical device. If you suspect iPad is interfering with your pacemaker, defibrillator, or any
other medical device, stop using iPad.
Not a medical device iPad is not designed or intended for use in the diagnosis of
disease or other conditions, or in the cure, mitigation, treatment, or prevention of
disease.
Medical conditions If you have any medical condition or experience symptoms that you
believe could be affected by iPad or flashing lights (for example, seizures, blackouts,
eyestrain, or headaches), consult with your physician prior to using iPad.
Explosive atmospheres Charging or using iPad in any area with a potentially explosive
atmosphere, such as areas where the air contains high levels of flammable chemicals,
vapors, or particles (such as grain, dust, or metal powders), may be hazardous. Obey all
signs and instructions.
Repetitive motion When you perform repetitive activities such as typing, swiping, or
playing games on iPad, you may experience discomfort in your hands, arms, wrists,
shoulders, neck, or other parts of your body. If you experience discomfort, stop using
iPad and consult a physician.
High-consequence activities This device is not intended for use where the failure of
the device could lead to death, personal injury, or severe environmental damage.
Choking hazard Some iPad accessories may present a choking hazard to small
children. Keep these accessories away from small children.
Important handling information
Cleaning Clean iPad immediately if it comes in contact with anything that may cause
stains or other damage—for example, dirt or sand, ink, makeup, soap, detergent, acids or
acidic foods, and lotions. To clean:
Disconnect all cables and turn iPad off (press and hold the Sleep/Wake button, then
drag the slider).
Use a soft, lint-free cloth—for example, a lens cloth.
Avoid getting moisture in openings.
Donʼt use cleaning products or compressed air.
The front of iPad is made of glass with a fingerprint-resistant oleophobic (oil-repellant)
coating. This coating wears over time with normal usage. Cleaning products and abrasive
materials will further diminish the coating and may scratch the glass.
Using connectors, ports, and buttons Never force a connector into a port or apply
excessive pressure to a button, because this may cause damage that is not covered
under the warranty. If the connector and port donʼt join with reasonable ease, they
probably donʼt match. Check for obstructions and make sure that the connector matches
the port and that you have positioned the connector correctly in relation to the port.
Lightning to USB Cable Discoloration of the Lightning connector after regular use is
normal. Dirt, debris, and exposure to moisture may cause discoloration. If your Lightning
cable or connector become warm during use or your iPad wonʼt charge or sync,
disconnect it from your computer or power adapter and clean the Lightning connector
with a soft, dry, lint-free cloth. Do not use liquids or cleaning products when cleaning the
Lightning connector.
Certain usage patterns can contribute to the fraying or breaking of cables. The Lightning
to USB Cable, like any other metal wire or cable, is subject to becoming weak or brittle if
repeatedly bent in the same spot. Aim for gentle curves instead of angles in the cable.
Regularly inspect the cable and connector for any kinks, breaks, bends, or other damage.
Should you find any such damage, discontinue use of the Lightning to USB Cable.
Operating temperature iPad is designed to work in ambient temperatures between 32°
and 95° F (0° and 35° C) and stored in temperatures between -4° and 113° F (-20° and
45° C). iPad can be damaged and battery life shortened if stored or operated outside of
these temperature ranges. Avoid exposing iPad to dramatic changes in temperature or
humidity. When youʼre using iPad or charging the battery, it is normal for iPad to get
warm.
If the interior temperature of iPad exceeds normal operating temperatures (for example,
in a hot car or in direct sunlight for extended periods of time), you may experience the
following as it attempts to regulate its temperature:
iPad stops charging.
The screen dims.
A temperature warning screen appears.
Some apps may close.
Important: You may not be able to use iPad while the temperature warning screen is
displayed. If iPad canʼt regulate its internal temperature, it goes into deep sleep mode
until it cools. Move iPad to a cooler location out of direct sunlight and wait a few minutes
before trying to use iPad again.
For more information, see the Apple Support article Keeping iPhone, iPad, and iPod touch
within acceptable operating temperatures.
Forgot your Apple ID, iPad passcode, or iCloud Security
Code?
Recover your Apple ID or reset your Apple ID password. Go to Appleʼs I Forgot
website.
Reset the iPad passcode. If you enter the wrong passcode to iPad six times in a row,
youʼll be locked out, and a message will say that iPad is disabled. If you canʼt remember
your passcode, you can erase iPad, then set a new passcode. (If you made an iCloud or
iTunes backup before you forgot your passcode, you can restore your data and settings
from the backup.) For more information, see the Apple Support article If you forgot the
passcode for your iPhone, iPad, or iPod touch, or your device is disabled.
Reset or create a new iCloud Security Code. If you enter the wrong iCloud Security
Code too many times when using iCloud Keychain, your iCloud Keychain will be disabled
on that device, and your keychain in iCloud will be deleted. Go to the Apple Support
article If you enter your iCloud Security Code incorrectly too many times.
iPad Support site
Comprehensive support information is available online at the iPad Support website. To
contact Apple for personalized support (not available in all regions), see the Apple
Support website.
An app doesnʼt fill the screen
Most apps for iPhone and iPod touch can be used with iPad, but they might not take
advantage of the large screen. In this case, tap
to zoom in on the app. Tap
to return
to the original size.
Check the App Store to see if thereʼs a version of the app thatʼs optimized for iPad, or a
universal version thatʼs optimized for iPhone, iPod touch, and iPad.
Onscreen keyboard doesnʼt appear
If iPad is paired with a Bluetooth keyboard, the onscreen keyboard doesnʼt appear. To
make the onscreen keyboard appear, press the Eject key on a Bluetooth keyboard. You
can also make the onscreen keyboard appear by moving the Bluetooth keyboard out of
range or turning it off.
Get information about your iPad
View overall storage availability and storage used per app. Go to Settings > General >
iPad Storage. For more information, see the Apple Support articles Check your storage
on your iPhone, iPad, and iPod touch and Manage your iCloud storage.
See Battery Usage. Go to Settings > Battery to see the elapsed time since iPad has
been charged. You can also display battery level as a percentage. See Charge and
monitor the battery in this guide.
View cellular usage. Go to Settings > Cellular. See Cellular data settings in this guide.
See more information about iPad. Go to Settings > General > About. The items you can
view include:
Name
Network
Number of songs, videos, photos, and apps
Capacity and available storage space
iOS version
(Cellular models) Carrier
Model number
Serial number
(Cellular models) Cellular Data Number
Wi-Fi and Bluetooth addresses
(Cellular models) IMEI (International Mobile Equipment Identity)
(Cellular models) ICCID (Integrated Circuit Card Identifier, or Smart Card) for GSM
networks
(Cellular models) MEID (Mobile Equipment Identifier) for CDMA networks
Modem firmware
Legal (including legal notices, and license, warranty, and RF exposure information)
To copy the serial number and other identifiers, touch and hold the identifier until Copy
appears.
To see regulatory marks, go to Settings > General > Regulatory.
View or turn off diagnostic information. Go to Settings > Privacy > Diagnostics &
Usage.
To help Apple improve products and services, iPad sends diagnostic and usage data. This
data doesnʼt personally identify you, but may include location information.
Cellular data settings
To activate cellular data service on iPad (Wi-Fi + Cellular models), turn cellular use on or
off, or add a Personal Identification Number (PIN) to lock the SIM card, go to Settings >
Cellular Data. With some carriers, you can also change your data plan.
Note: For help with cellular network services and billing, contact your wireless service
provider.
If Cellular Data is off, all data services will use only Wi-Fi—including email, web browsing,
push notifications, and other services. If Cellular Data is on, carrier charges may be
incurred. For example, using certain features and services that transfer data, such as
Messages, could result in charges to your data plan.
Turn Cellular Data on or off. Go to Settings > Cellular Data, then turn Cellular Data on or
off. The following options may also be available:
Monitor and manage your cellular data network usage: You can see which apps use
cellular data and turn off the option, if you want.
Turn LTE on or off: Turning on LTE loads data faster.
Turn Data Roaming on or off: Turning off Data Roaming avoids carrier charges when
using a network provided by a different carrier.
Set up Personal Hotspot: Personal Hotspot shares the Internet connection on iPad
with your computer and other iOS devices. See Personal Hotspot in this guide.
Turn Wi-Fi Assist on or off: If Wi-Fi connectivity is poor, Wi-Fi Assist uses cellular data
to boost the signal.
Note: Using data over a cellular network may incur additional fees.
Set whether cellular data is used for apps and services. Go to Settings > Cellular
Data, then turn cellular data on or off for any app that can use cellular data. If a setting is
off, iPad uses only Wi-Fi for that service. The iTunes setting includes both iTunes Match
and automatic downloads from the iTunes Store and the App Store.
Activate, view, or change your cellular data account. Go to Settings > Cellular Data,
tap View Account, then follow the onscreen instructions.
Lock the SIM card. Go to Settings > Cellular Data > SIM PIN. Locking the SIM card with a
PIN means you need to enter the PIN to use a cellular connection on iPad.
For more information about GSM, CDMA, and LTE cellular data networks, see the Apple
Support article About cellular data networks.
VPN settings
A VPN (virtual private network) provides secure access over the Internet to private
networks, such as the network at your organization. You may need to install a VPN app
from the App Store that configures iPad to access a network. Contact your system
administrator for information about the app and settings you need.
Profiles settings
Configuration profiles define settings for using iPad with corporate or school networks or
accounts. You might be asked to install a configuration profile that was sent to you in an
email, or one that is downloaded from a webpage. iPad asks for your permission to install
the profile, and displays information about what it contains, when you open the file. You
can see the profiles you have installed in Settings > General > Profiles & Device
Management. If you delete a profile, all of the settings, apps, and data associated with
the profile are also deleted.
Sell or give away iPad
Before you sell or give away your iPad, see the Apple Support article What to do before
selling or giving away your iPhone, iPad, or iPod touch, and be sure to perform the
following tasks:
Back up iPad with iCloud Backup or back up iPad with iTunes. If you replace one iPad
with another, you can use the setup assistant to restore the backup to your new iPad.
Erase all content and settings, which includes your personal information.
Learn more, service, and support
Refer to the following resources to get more iPad-related safety, software, service, and
support information.
To learn about
Do this
Using iPad safely
See Important safety information.
iPad service and support, tips, forums, and
Apple software downloads
Go to the iPad Support website.
The latest information about iPad
Go to the iPad website.
Managing your Apple ID account
Sign in to your Apple ID account page.
Using iCloud
See iCloud Help.
Using iTunes
Open iTunes, then choose Help > iTunes Help.
For an online iTunes tutorial (not available in all
regions), go to the iTunes Support website.
Using other Apple iOS apps
Go to the Apple Apps Support website.
Finding your iPad serial number or IMEI
You can find your iPad serial number or
International Mobile Equipment Identity (IMEI)
on the iPad packaging. Or, on iPad, choose
Settings > General > About. For more
information, go to the Apple Support article
Find the serial number and other information on
your iPhone, iPad or iPod touch.
Obtaining warranty service
First follow the advice in this guide, then go to
the iPad Support website.
Viewing iPad regulatory information
On iPad, go to Settings > General > Regulatory.
Battery service
Go to the Battery Service and Recycling
website.
Using iPad in an enterprise environment
Go to the Business website.
Using iPad in education
Go to the Education website.
FCC compliance statement
This device complies with part 15 of the FCC rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
Note: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in
a particular installation.
If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment to an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Important: Changes or modifications to this product not authorized by Apple could void
the electromagnetic compatibility (EMC) and wireless compliance and negate your
authority to operate the product.
This product has demonstrated EMC compliance under conditions that included the use
of compliant peripheral devices and shielded cables between system components. It is
important that you use compliant peripheral devices and shielded cables between system
components to reduce the possibility of causing interference to radios, televisions, and
other electronic devices.
Responsible party (contact for FCC matters only):
Apple Inc.
One Apple Park Way, MS 911-2HW
Cupertino, CA 95014
Canadian regulatory statement
This device complies with Innovation, Science, and Economic Development Canada
licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1)
this device may not cause interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of the device.
Operation in the band 5150–5250 MHz is only for indoor use to reduce the potential for
harmful interference to co-channel mobile satellite systems.
Le présent appareil est conforme aux CNR dʼInnovation, Sciences et Développement
économique Canada applicables aux appareils radio exempts de licence. Lʼexploitation
est autorisée aux deux conditions suivantes : (1) lʼappareil ne doit pas produire de
brouillage, et (2) lʼutilisateur de lʼappareil doit accepter tout brouillage radioélectrique
subi, même si le brouillage est susceptible dʼen compromettre le fonctionnement.
La bande 5 150 – 5 250 MHz est réservée uniquement pour une utilisation à lʼintérieur
afin de réduire les risques de brouillage préjudiciable aux systèmes de satellites mobiles
utilisant les mêmes canaux.
CAN ICES-3 (B)/NMB-3(B)
Apple and the environment
At Apple, we recognize our responsibility to minimize the environmental impacts of our
operations and products. For more information, go to the Apple and the Environment
website.
Disposal and recycling information
Apple Recycling Program (available in some regions)
For free recycling of your old iPad, a prepaid shipping label, and instructions, go to the
Recycling website.
This symbol indicates that this product and/or battery should not be disposed of with
household waste. You must dispose of iPad properly according to local laws and
regulations. When iPad reaches its end of life, contact local authorities to learn about
disposal and recycling options, or simply drop it off at your local Apple Retail Store or
return it to Apple. The battery will be removed and recycled in an environmentally friendly
manner. For more information, go to the Recycling website.
European Union—Disposal Information
The symbol above means that according to local laws and regulations your product
and/or its battery shall be disposed of separately from household waste. When this
product reaches its end of life, take it to a collection point designated by local authorities.
The separate collection and recycling of your product and/or its battery at the time of
disposal will help conserve natural resources and ensure that it is recycled in a manner
that protects human health and the environment.
Brasil – Informações sobre descarte e reciclagem
O símbolo acima indica que este produto e/ou sua bateria não devem ser descartados no
lixo doméstico. Quando decidir descartar este produto e/ou sua bateria, faça-o de acordo
com as leis e diretrizes ambientais locais. Para informações sobre substâncias de uso
restrito, o programa de reciclagem da Apple, pontos de coleta e telefone de informações,
visite www.apple.com/br/environment.
Información sobre eliminación de residuos y reciclaje
El símbolo de arriba indica que este producto y/o su batería no debe desecharse con los
residuos domésticos. Cuando decida desechar este producto y/o su batería, hágalo de
conformidad con las leyes y directrices ambientales locales. Para obtener información
sobre el programa de reciclaje de Apple, puntos de recolección para reciclaje, sustancias
restringidas y otras iniciativas ambientales, visite www.apple.com/la/environment o
www.apple.com/mx/environment.
Turkey environmental information
Türkiye Cumhuriyeti: AEEE Yönetmeliğine Uygundur.
Battery service
The lithium-ion battery in iPad should be serviced by Apple or an authorized service
provider. For more information about battery services and recycling, go to the Battery
Service and Recycling website.
Dispose of batteries according to your local environmental laws and guidelines.
Battery charger system efficiency
Taiwan battery statement
China battery statement
ENERGY STAR® compliance statement
To save energy, iPad is set to lock after two minutes of user inactivity. To change this
setting, go to Settings > Display & Brightness > Auto-Lock. To unlock iPad, press the
Sleep/Wake button or the Home button.
iPad meets the ENERGY STAR guidelines for energy efficiency. Reducing energy
consumption saves money and helps conserve valuable resources; for more information,
go to the Energy Star website.
 Apple Inc.
© 2018 Apple Inc. All rights reserved.
Apple, the Apple logo, AirDrop, AirPlay, AirPods, AirPort, AirPrint, Apple Music, Apple News, Apple Pay,
Apple Pencil, Apple TV, Apple Watch, FaceTime, Finder, Flyover, Guided Access, Handoff, iBooks, iMessage,
iPad, iPad Air, iPad Pro, iPhone, iPod, iPod touch, iTunes, Keychain, Keynote, Lightning, Mac, macOS,
Numbers, OS X, Pages, Photo Booth, Retina, Retina HD, Safari, Siri, Smart Cover, Spotlight, Touch ID,
True Tone, and watchOS are trademarks of Apple Inc., registered in the U.S. and other countries.
HomeKit, HomePod, iPad mini, Live Photos, Multi-Touch, Smart Keyboard, and tvOS are trademarks of
Apple Inc.
App Store, iBooks Store, Genius, iBooks Store, iCloud, iCloud Drive, iCloud Keychain, iTunes Match, and
iTunes Store are service marks of Apple Inc., registered in the U.S. and other countries.
Apple
One Apple Park Way
Cupertino, CA 95014
www.apple.com
Adobe and Adobe Photoshop Elements are trademarks or registered trademarks of Adobe Systems
Incorporated in the U.S. and/or other countries.
Beats 1 is a service mark of Beats Electronics, LLC, registered in the U.S. and other countries.
IOS is a trademark or registered trademark of Cisco in the U.S. and other countries and is used under license.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of
such marks by Apple Inc. is under license.
ENERGY STAR® is a U.S. registered trademark.
Other company and product names mentioned herein may be trademarks of their respective companies.
Every effort has been made to ensure that the information in this manual is accurate. Apple is not responsible
for printing or clerical errors.
Some apps are not available in all regions. App availability is subject to change.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Apple Keywords                  : 
Author                          : fsegal
Create Date                     : 2018:02:26 21:12:44Z
Modify Date                     : 2018:03:01 11:36:20-08:00
Subject                         : 
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 5.6-c015 81.157285, 2014/12/12-00:43:15
Format                          : application/pdf
Creator                         : fsegal
Description                     : 
Title                           : iPad User Guide
Creator Tool                    : Safari
Metadata Date                   : 2018:03:01 11:36:20-08:00
Keywords                        : 
Producer                        : Mac OS X 10.13.3 Quartz PDFContext
Document ID                     : uuid:34facb54-d924-8546-b867-c200ead2ef6a
Instance ID                     : uuid:05e705f3-ae26-8d49-8bb3-639a75c00aba
Page Count                      : 150

EXIF Metadata provided by EXIF.tools