Applied Wireless Identifications Group MR1824 Sentinel-Prox MR-1824 User Manual install

Download:
Mirror Download [FCC.gov]
Document ID	40567
Application ID	uolVAD2+TZZNNtE3UP356A==
Document Description	Installation Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	4.36kB (54474 bits)
Date Submitted	1999-06-04 00:00:00
Date Available	1999-06-29 00:00:00
Creation Date	1999-06-03 10:39:41
Producing Software	Acrobat PDFWriter 3.03 for Windows NT
Document Lastmod	0000-00-00 00:00:00
Document Title	install.PDF
Document Creator	Microsoft Word - install.doc
Document Author:	10675

Installation Sheet (Wiegand Output Only) – 004-97-A
Sentinel-Prox Mr-1824 Reader
Reader Description
Last Update: April 9, 1999
The Sentinel-Prox MR-1824 Reader is a radio frequency identification (RFID) Reader used in Access Control
System. The Reader consists of a transmit/receive antenna, associated electronics, and a polycarbonate housing
which encloses the antenna and the electronics. The inside of the polycarbonate housing is potted with a two-part
epoxy to protect the antenna and the electronics against outside environment.
Parts List
a.)
b.)
c.)
d.)
Installation sheet, P/N: 004-97-A
Sentinel-Prox MR-1824 Reader, P/N: 004-20-A
#6-32 x 1” Thread-cutting screw, Type 23, P/N: 616PPN23ZP
Screw hole plug, P/N: 004-27-A
QTY=1
QTY=1
QTY=4
QTY=5 (1 spare)
Installation Procedure
1.) Position the Reader (Item b on Parts List) at desired mounting position on the mounting surface. Drill four
7/64 (0.109)-inch holes for mounting the Reader and one 11/16 (0.688)-inch clearance hole for clearing the
cable and the straight-thru fitting according to Figure 1.
2.) Connect the Reader and the Panel together according to Figure 2.
a. Mount the Reader to the mounting surface with the provided #6-32x1” Thread-cutting screws, Type 23
(Item c on Parts List). Insert the Screw hole plugs (Item d on Parts List) into the screw clearance holes to
conceal the screws. Note: screw hole plugs are designed for one-time use only! Once the
plugs are seated, they can not be removed without damaging the plugs.
Product Specifications
1.) Read Range (Metal Compensated)
1 5VDC (280mA peak)
1 12VDC (700 mA peak)
Up to 19 inches (48 cm)
Up to 25 inches (64 cm)
2.) Characteristics
1 Indoor and Outdoor
UL Listed
1 Operating Temperature Range-35°C to 65°C (-31°F to 150°F)
1 Operating Humidity
0 to 95% non-condensing
3.) Operating Parameters
1 Excitation Frequency
1 Wiegand Output (Standard)
1 Wiegand Output (Optional)
125kHz
26 bits
Up to 56 bits
Note: For installation using RS-232 output or combining Wiegand/RS-232, please refer to Operation &
Installation Manual, P/N: 004-98-A. This manual can be downloaded directly from our web page.
Do not cycle the power supply ON and OFF in rapid succession. Each power supply has its unique “decay”
characteristics. Turning the power supply ON and OFF in rapid succession can cause the Microcontroller to lock1
up, due to improper initialization. Always turn the power supply OFF and count 10 seconds before turning ON
again.
NOTE: SEE OUR WEB PAGE http://www.awid.com FOR DETAIL INSTALLATION INSTRUCTION
OR FORWARD ALL WRITTEN QUESTIONS TO service@awid.com (ALL QUESTIONS WILL BE
ANSWERED WITHIN 24 HOURS) OR CALL US AT 1-800-369-5533 FROM 8 A.M. TO 8 P.M.
EASTERN STANDARD TIME FOR TECHNICAL ASSISTANCE.
FIGURE 1: HOLES DIMENSIONS
FIGURE 2: WIEGAND FORMAT WIRING DIAGRAM

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Page Count                      : 3
Creator                         : Microsoft Word - install.doc
Create Date                     : 1999:06:03 10:39:41
Title                           : install.PDF
Author                          : 10675
Producer                        : Acrobat PDFWriter 3.03 for Windows NT
Subject                         : 

EXIF Metadata provided by EXIF.tools