Aram Huvis ARAMO-SMART PORTABLE SKIN DIAGNOSIS SYSTEM User Manual Microsoft PowerPoint Smart manual Eng

Download:
Mirror Download [FCC.gov]
Document ID	1227024
Application ID	LGZuWlNLy1hSs9Aku2lcdA==
Document Description	USERS MANUAL
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	69.49kB (868587 bits)
Date Submitted	2010-01-13 00:00:00
Date Available	2010-01-14 00:00:00
Creation Date	2009-06-16 11:26:01
Producing Software	Acrobat Distiller 7.0 (Windows)
Document Lastmod	2010-01-12 14:21:24
Document Title	Microsoft PowerPoint - Smart manual-Eng
Document Creator	PScript5.dll Version 5.2.2
Document Author:	BDC5B1D4C3B6

Key function
1. Power button
Press it to “ON”
Press & hold it for 5sec to “OFF”
2. Mode change button
To change diagnosis process
Moisture -> Wrinkle (30X) -> Evenness (60X) > Pore (60X) -> Pigmentation (60X PL) -> 1X
lens
3. LED light mode change button
Only used in 1X lens mode
In the album, it is move key to select another
image
4. Go to Album button
When camera is activated, press this and
the captured image will be shown as a album
In the album, it is move key to select another
image
5. Capture button
Click to capture and re-activate the camera
When it is searching for Blue tooth device.
6. Bluetooth sending button
It is used in Album to send selected image to
external device
Auto-focus function- press “5”.
Capture – press “5” for 2 sec.
7. Delete button
It is used in Album to delete selected image
Moisture Check
To check moisture,
Simply place moisture sensor area to skin
And press button 3.
There are four round shaped metal in
the lens part, above two metals “1” are
moisture sensor
The test result will be displaced as shown
as “2”
moisture
sensor
Please press “M” button to move to next step.
Wrinkle Check
X30
Capture the image by “1”
Re-activate & re-capture press “1”
Diagnosis process will be done in
1) PDA ( which has Blue tooth )
2) PC ( Blue tooth )
Or captured image will be saved in external
memory such as SD or Mini SD card
then it can be inserted into PC to
perform the analysis
Diagnosis software can be provided –
depends on project.
Auto-focus function- press “1”.
Capture – press “1” for 2 sec.
Please press “M” button to move to next step.
Album ( 4 images
view )
Captured image is saved in Album
Go to Album, press “3” when the camera
is activating
When album is shown, “4” images will
shown
Press “1” selected image will be shown in
“Full Screen”
In 4 images view, press “2” or “3” to select
other images
In 4 images view & one image view,
press “4” to transfer the image to external
device and press “5” to delete selected
image
Album ( 1 images view )
Captured image is saved in Album
Go to Album, press “3” when the camera
is activating
When album is shown, “4” images will
shown
Press “1” selected image will be shown in
“Full Screen”
In 4 images view, press “2” or “3” to select
other images
In 4 images view & one image view,
press “4” to transfer the image to external
device and press “5” to delete selected
image
Evenness Check
X60
From “Wrinkle” check to “Evenness” check
process, press “M” to change
Capture the image by “2”
Re-activate & re-capture press “2”
Please press “M” button to move to next step.
Pore Check
X60
From “Evenness” check to “Pore” check
process, press “M” to change
Capture the image by “2”
Re-activate & re-capture press “2”
Please press “M” button to move to next step.
Spot Check
X60Polarizing
mode
From “Pore” check to “Spot” check
process, press “M” to change
Capture the image by “2”
Re-activate & re-capture press “2”
Please press “M” button to move to next step.
X1
Client’s profile
From “Spot” check to “X1 lens to take client
picture”.
process, press “M” to change
Capture the image by “2”
Re-activate & re-capture press “2”
Operating frequency: 2400-2483.5 MHz
Operating voltage : DC 3.7V Li-ion Battery
Operating temperature : -10℃ ~ 50℃
10
Please press “M” button to move to first step.
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
con-nected.
• Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: To assure continued compliance, (example - use only shielded interface cables
when connecting to computer or peripheral devices). Any changes or modifications not
expressly approved by the party responsible for compliance could void the user’s authority to
operate this equipment.This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause
undesired operation
including interference that may cause undesired operation
IMPORTANT NOTE:
FCC RF Radiation Exposure Statement:
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with a minimum distance of 20
centimeters between the radiator and your body.This transmitter must not be co-located or
operating in conjunction with any other antenna or transmitter.
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV
INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT.
SUCH MODIFICATIONS COULD VOIDTHE USER�S AUTHORITY TO OPERATE THE
EQUIPMENT.
IMPORTANT Safety Instruction:
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this equipment near water.
6) Do not using near any heat sources such as radiators, heat resisters, stove, or other
equipment that produce heat.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0 (Windows)
Create Date                     : 2009:06:16 11:26:01+09:00
Creator Tool                    : PScript5.dll Version 5.2.2
Modify Date                     : 2010:01:12 14:21:24+09:00
Metadata Date                   : 2010:01:12 14:21:24+09:00
Format                          : application/pdf
Creator                         : 
Title                           : Microsoft PowerPoint - Smart manual-Eng
Document ID                     : uuid:56036184-8bbd-4304-a013-47468fc0d800
Instance ID                     : uuid:c1ac2da2-7ff7-4e00-8698-c21acc79af4d
Page Count                      : 12
Author                          : 

EXIF Metadata provided by EXIF.tools