Arcade Crazy Cuckoo Manual (Cec) User
Crazy Cuckoo Manual (Cec) CRAZY CUCKOO MANUAL (CEC)
2013-09-30
User Manual: Arcade Crazy Cuckoo Manual (Cec)
Open the PDF directly: View PDF 
.
Page Count: 51
| Download | |
| Open PDF In Browser | View PDF |
CRAZY CUCKOO
OWNER'S MANUAL
CEC
IMPORTANT
-Please read the manual carefully and keep it in mind before using this machine.
-Put this manual within touch of your reference in anytime.
PR E C A UT I ONS F OR USE
The following safety precautions are given throughout this manual. They must be strictly followed to protect those
who install, use or maintain this product as well as to protect players, visitors and property.
For safty reasons.
T he following suggestions should be adher ed to:
W AR NI NG
Disregarding could result in serious injury.
CAUT ION
Disregarding could result in injury or product damage.
Indicates a care should be taken.
Forbidden.
Indicates a matter which must be performed.
Certain procedures require a qualified in-shop maintenance person or industry specialist. For such
instructions, a qualified person must take care of the jobs.
Otherwise an electric shock, machine trouble, or a serious accident may result.
Replacing the machine parts, inspecting and maintaining the machines, and troubleshooting must be assigned only
to a qualified in-shop maintenance person or industry specialist. This booklet gives instructions that hazardous jobs in
particular must be handled by an industry specialist. Qualified in-shop maintenance person and industry specialist are
defined as follows.
Qualified in-shop maintenance person
A service staff shall have experience in operations of game machines. The staff shall be responsible for assembly,
installation, inspection and maintenance of the machine.
Industry specialist
An industry specialist must be engaged in designing, manufacturing, inspecting and servicing amusement machines.
He or she must have an education in electrical, electronic and mechanical engineering, and routinely maintain and
repair amusement machines.
PR E C A UT I ONS F OR USE
W AR NI NG
Be sure to consult an industry specialist when setting
up, moving or transporting this product.
This product should not be set up, moved or transported
by any one other than an industry specialist.
When installing this product, set the 4 leg levelers evenly
on the floor and make sure that the product is installed
stably in a horizontal position. Unstable installation may
result in injury or accident.
When installing this product, do not apply undue force on
movable parts. Otherwise, injury and accident may result,
or the product may be damaged.
The machine for indoor usage only does not
install outside.
Do not set the game machine up near
emergency exits.
Protect the game machine from:
Rain or moisture.
Direct sunlight.
Direct heat from air-conditioning and heating equipment,
etc..
Hazardous flammable substances.
Otherwise an accident or malfunction may result.
Do not place containers holding chemicals or
water on or near the game machine.
Do not place objects near the ventilating holes.
Do not bend the power cord by force or place
heavy objects on it.
Never plug or unplug the power cord with wet
hands.
Never unplug the game machine by pulling the
power cord.
CAUT ION
Be sure to use indoor wiring within the specified
voltage requirements. For extension cord, use the
specified rating or more.
Be sure to use the attached power cord.
Never plug more than one cord at a time into
the electrical receptacle.
Do not lay the power cord where people
walk through.
Be sure to ground this product.
Do not exert excessive force when moving
the machine.
For proper ventilation, keep the game machine
″) away from the walls.
100mm(4″
Do not alter the system related dipswitch settings.
PR E C A UT I ONS F OR USE
W AR NI NG
If there is any abnormality such as smoke,
bad smell or abnormal noise being emitted
from the machine, immediately turn OFF the
main power switch and unplug the power cord from
the receptacle to stop operating it.
Using the machine in abnormal conditions could result
in fire or accidents.
In case of abnormality
1. Turn OFF the main power switch.
2. Unplug the power cord from the receptacle.
3 . Contact your nearest dealer.
Do not leave the power cord plugged in
improperly or covered with dust.
Doing so could resu t the power cord
periodically.
CAUT ION
Do not use this product anywhere other than
industrial areas.
Using in a residential area or an area next to a
residential area could affect signal reception of radios,
television sets, telephones, etc..
Do not give shock the surface of glass products.
Please do not play this game if
When you do drinking;
When your physical condition is not normal;
When you are in pregnancy;
When you have on a pulse controller;
When you have recently experienced a cramp or fainting
away while watching TV.
Avoid excessive force/shock while playing/moving the
game.
While do games, pay attention to surrounding.
Do not plug or unplug the power cord with wet
hands.
In handling the power cord, follow the
instructions below.
Do not damage the power
cord.
Do not bend the power
cord excessively.
Do not heat the power
cord.
Do not bind the power
cord.
Do not sandwich the
power cord.
Do not modify the power
cord.
Do not twist the power
cord.
Do not pull the power
cord.
Do not stand on the power
cord.
Do not drive a nail into the
power cord.
If the power cord or power plug becomes damaged,
stop using the machine immediately and ask your
nearest dealer to replace the parts.
PR E C A UT I ONS F OR USE
W AR NI NG
Be sure to turn OFF the main power switch
and unplug the power cord from the
receptacle before inspecting or cleaning the
machine.
When replacing parts, be sure to use parts of
the correct specifications. Never use parts
other than the specified ones.
Opening inside the machine shall be done by
machine specialist only as high electric
current is being sent inside. For game machine with
monitor, a care should be taken while opening its
back door. If not, a damage to the inside parts or the
monitor may occur.
CAUT ION
Components in the game are sensitive to
vibrations and impact. Care should be used
when moving and transporting the game
machine.
Be sure not to let the machine tip over.
Before moving the machine, be sure to turn
OFF the main power switch, unplug the
power cord from the receptacle and remove
the power cord form the machine.
Before moving take the machine, off the levelers and
move it on the casters.
Avoid excessive force while moving the machine.
If the sub power switch of the service panel
is turned OFF without turning OFF the main
power switch of the power supply unit, some
parts in the units remain live. When opening the
back door, be sure to turn OFF the main power
switch and unplug the power cord from the
receptacle.
Strictly refrain from disassembly and repair
of parts which are not indicated in this
manual, as well as settings and remodeling.
To clean the game machine, wipe it with a soft cloth
dampened in a neutral detergent.
Using thinner of other organic solvent or alcohol may
decompose the material.
Electrical shock or equipment failure could be caused
by water entering the inside of the machine.
PR E C A U T I ONS
IN HA NDL ING
When setting up, inspecting, maintaining, moving or
transporting this product, follow the procedures and
instructions set forth in this manual and perform such
work safely.
Do not set up, handle, inspect, maintain, move or
transport this product under conditions equivalent to
the condition of "WARNING" or "CAUTION" specified
in this manual.
If a new owner is to have this product as a result of
transfer, etc., be sure to give this manual to the new
owner.
TROUBLESHOOTING TABLE
NO
1
PROBLEMS
NO POWER ON GAME MACHINE
CAUSE
COUNTERMEASURES
REAR POWER S/W IS TURNED
OFF
FRONT POWER S/W IS TURNED
OFF
REFERENCE
PAGE
TURN ON THE REAR POWER S/W
P39-⑥
TURN ON THE FRONT POWER S/W
P17-②
FUSE IS BLOWN
CHANGE A FUSE
P19-②
VOLUME IS NOT ADJUSTED
CHANGE VOLUME PCB
P17-⑤
EXECUTE SOUND TEST MODE IN TEST MODE
MAIN BD IS CONDEMNED
2
NO SOUND
CHANGE MAIN BD
P18-①
EXECUTE SOUND TEST MODE IN TEST MODE
P18-①
CHANGE CPU BD
P18-①
CHECK COIN MECH IF IT HAS A SAMPLE MEDAL
P15-②
CONTROL VR OF COIN MECH
P15-②
CHANGE COIN MECH
P15-②
CHECK COIN CONNECTOR
P15-②
CPU BD IS CONDEMNED
3
COIN ACCEPTER DOES NOT WORK COIN MECH REJECT COIN
CHECK IF TICKET IS EMPTY
RED LIGHT ON THE TICKET
DISPENSER
4
CHECK IF TICKET IS STUCK
CHECK CONNECTOR
TICKET IS NOT DISPENSED
TICKET DISPENSER DOES NOT
WORK
5
6
7
PENDULUM DOES NOT MOVE
CUCKOO BIRD DOES NOT MOVE
BALL IS NOT DROPED
EXECUTE TICKET TEST IN TEST MODE(8-1,
#3~#6 TEST)
P18-①
CHECK THE ELECTRIC VOLTAGE IF YOU
MEASURE AT LEAST DC+12V
P34-⑨
CHECK SENSOR
P34-⑨
EXECUTE PENDULUM MOTOR TEST MODE IN
TEST MODE(8-1, #13~#14)
P9
CHANGE A SOLENOID
P21-⑦
CHANGE MAIN BD
P18-①
THE MACHINE IS EMPTY
FILL WITH BALLS
P3-⑨
ELEVATOR DOES NOT WORK
CHECK MICRO SWITCH(N.O)
P32-⑮
CHANGE SOLENOID
P20-④
CHANGE MAIN BD
P18-①
MOTOR DOES NOT WORK
SOLENOID DOES NOT WORK
RECONECT THE WIRES
CONNECTOR IS WRONG
9
P22-④
CHANGE MAIN BD
SOLENOID DOES NOT WORK
8
CHANGE TICKET DISPENSER
DISPLAY LED DOES NOT WORK
CHANGE MAIN BD
P18-①
WIRING HARNESS IS CUT
RECONNECT THE WIRES
HARNESS CONNECTED TO THE
MOTOR IS FAULTY
RECONNECT THE WIRES
P32-16
EMPTY OF BALLS
FILL WITH BALLS(4 BALL AT LEAST)
P3-⑨
CHECK IF SWITCH(#5 OF 8-2) IS WORKS
PROPERLY IN TEST MODE
P32-⑮
CHANGE MICRO SW
P32-⑮
CHANGE MAIN BD
P18-①
ELEVATOR DOES NOT WORK
MICRO SW DOES NOT WORKS
PROPERLY
-13-
NO
PROBLEMS
CAUSE
COUNTERMEASURES
CHECK IF SWITCH(#11 OF 8-2) IS WORKS
PROPERLY IN TEST MODE
WIN MICRO SW DOES NOT WORK
CHANGE MICRO SW
PROPERLY
10
THE COIN IS PASSED THROUGH
THE HOLE OF PENDULUM, BUT
THE BALL IS NOT DROPPED
CHANGE MAIN BD
BALL OUT SW DOES NOT WORK
PROPERLY
CHECK IF SW(#6 OF 7-2) IS WORKING
PROPERLY IN TEST MODE
CHANGE MICRO SW
CHANGE MAIN BD
REFERENCE
PAGE
P26-③
P26-③
P18-①
35-16
35-16
P18-①
CHECK SENSOR WIRING
THE SCORE ON THE WHEEL IS NOT
ENCODER SNSOR IS FAULTY
11
CORRECT
12
THE LETTER ON THE FND IS
BROKEN
CHANGE SENSOR
P35-⑫
CHANGE MAIN BD
P18-①
WIRING HARNESS IS CUT
CHECK THE WIRING HARNESS
CONNECTOR IS FAULTY
CHECK THE CONNECTOR
INPUT AND OUTPUT ARE
SWITCHED
SWITHCH THE INPUT AND OUTPUT CONNECTOR
FND BOARD IS FAULTY
CHANGE FND BOARD
P16-②,P23-②
CHANGE MAIN BD
P18-①
DC POWER TO SMPS IS CUT OFF CHANGE THE SMPS
13
14
ELECTRIC POWER IS SUPPLIED,
BUT THE MACHINE DOES NOT
WORK
ALL SAVED DATE ARE DELETED
P19-②,③
CONNECTION OF WIRING IS
WRONG
RECONNECT THE WIRES
WIRING HARNESS IS CUT
CHECK THE WIRES AND RECONNECT THE WIRES
MAIN BOARD IS FAULTY
CHANGE MAIN BD
P18-①
CPU BOARD IS FAULTY
CHANGE CPU BOARD
P18-②
SETUP SW2 IS BEING PUSHED
P17-⑦
CHANGE SETUP BUTTON PCB
P17-⑦
SETUP SW IS WONG
-14-
CRAZY CUCKOO SHEET (CEC TYPE)
2012.12.19
IMAGE
CRAZY CUCKOO SHEET (CEC TYPE)
NAME
QUANTITY
MATERIAL
CDDE NO.
1
FRINT DOOR SHEET
1SET
SHEET Silk screen
MCRC0SHE001
2
COIN GUIDE BASKET
COVER A SHEET
1SET
SHEET Silk screen
MCRC0SHE002
3
COIN GUIDE BASKET
COVER B SHEET
1SET
SHEET Silk screen
MCRC0SHE003
4
FRONT UPPER SHEET
1SET
SHEET Silk screen
MCRC0SHE004
1SET
SHEET Silk screen
MCRC0SHE005
1SET
SHEET Silk screen
MCRC0SHE006
1SET
SHEET Silk screen
MCRC0SHE007
2SET
SHEET Silk screen
MCRC0SHE008
1SET
SHEET Silk screen
MCRC0SHE009
CUCKOO DOOR 01
SHEET
GARDEN PLATE A L
SHEET
GARDEN PLATE A R
SHEET
GARDEN PLATE B L,R
SHEET
SEGA LOGO CUCKOO
SHEET
5
6
7
8
9
10
RECYCLE MARK SHEET
1SET
SHEET Silk screen
MCRC0SHE010
11
TICKETS SHEET
1SET
SHEET Silk screen
MCRC0SHE011
1SET
BACK LIGHTING
MCRC0SHE012
1SET
BACK LIGHTING
MCRC0SHE013
1SET
ACRYL Silk screen
MCRC0SHE014
1SET
ACRYL Silk screen
MCRC0SHE015
1SET
ACRYL Silk screen
MCRC0SHE016
1SET
ACRYL Silk screen
MCRC0SHE017
1SET
ACRYL Silk screen
MCRC0SHE018
HOW TO PLAY L
SHEET
HOW TO PLAY R
SHEET
TICKET OWED ACRYL
SHEET
GUIDE ACRYL 20X45
SHEET
12
13
14
15
GUIDE ACRYL 25X45
SHEET
GUIDE ACRYL 30X45
SHEET
PENDULUM ACRYL
SHEET
16
17
18
19
WHEEL COVER ACRYL
SHEET
1SET
ACRYL Silk screen
MCRC0SHE019
20
BONUS ACRYL SHEET
1SET
ACRYL Silk screen
MCRC0SHE020
21
TOP DECO PET L
1SET
ACRYL Silk screen
MCRC0SHE021
22
TOP DECO PET R
1SET
ACRYL Silk screen
MCRC0SHE022
ㅡ42ㅡ
A4(210*297)
CRAZY CUCKOO SHEET (CEC TYPE)
2012.12.19
CRAZY CUCKOO SHEET (CEC TYPE)
23
CUCKOO DOOR 02
L SHEET
1SET
SHEET Silk screen
MCRC0SHE023
24
CUCKOO DOOR 02
R SHEET
1SET
SHEET Silk screen
MCRC0SHE024
25
SIDE LOW
L SHEET
1SET
SHEET Silk screen
MCRC0SHE025
26
SIDE LOW
R SHEET
1SET
SHEET Silk screen
MCRC0SHE026
27
FRONT LOWER
UPPER SHEET
1SET
SHEET Silk screen
MCRC0SHE027
28
FRONT LOWER
LOWER L SHEET
1SET
SHEET Silk screen
MCRC0SHE028
29
FRONT LOWER
LOWER R SHEET
1SET
SHEET Silk screen
MCRC0SHE029
30
BONUS GAME PLATE
CEC SHEET
1SET
SHEET Silk screen
MCRC0SHE031
ㅡ43ㅡ
A4(210*297)
800 Arthur Avenue, Elk Grove Village, IL 60007-5215 U.S.A
Telephone: +1-847-364-9787
Toll free: +1-888-877-2669
Facsimile: +1-847-427-1065
http://www.segaarcade.com
42 Barwell Business Park, Leatherhead Road, Chessington, Surrey. KT9 2NY UNITED KINGDOM
Telephone: +44 (0) 208-391-8081
Facsimile: +44 (0) 208-391-8099
SEGA
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : Yes Page Count : 51 Has XFA : No XMP Toolkit : XMP toolkit 2.9.1-14, framework 1.6 About : uuid:5e6ed7d1-7b93-4e31-8572-a014dcbedccf Modify Date : 2013:01:14 09:10:34+09:00 Create Date : 2013:01:14 09:10:32+09:00 Metadata Date : 2013:01:14 09:10:34+09:00 Document ID : uuid:9b2900d4-73bb-461b-86ff-ceaddeace3b5 Format : application/pdf Creator : Adobe Acrobat 6.0 Producer : Adobe Acrobat 6.0EXIF Metadata provided by EXIF.tools