Arcade Crazy Cuckoo Manual (Cec) User

Crazy Cuckoo Manual (Cec) CRAZY CUCKOO MANUAL (CEC)

User Manual: Arcade Crazy Cuckoo Manual (Cec)

Open the PDF directly: View PDF .
Page Count: 51

OWNER'S MANUAL

CEC

-Please read the manual carefully and keep it in mind before using this machine.

IMPORTANT

-Put this manual within touch of your reference in anytime.

CRAZY CUCKOO

PR E C AUT I ONS F OR USE

The following safety precautions are given throughout this manual. They must be strictly followed to protect those

who install, use or maintain this product as well as to protect players, visitors and property.

For safty reasons.

T he following suggestions should be adhered to:

C AUT I ON

Disregarding could result in injury or product damage.

W AR NI NG

Disregarding could result in serious injury.

Indicates a matter which must be performed.

Indicates a care should be taken.

Certain procedures require a qualified in-shop maintenance person or industry specialist. For such

instructions, a qualified person must take care of the jobs.

Otherwise an electric shock, machine trouble, or a serious accident may result.

Replacing the machine parts, inspecting and maintaining the machines, and troubleshooting must be assigned only

to a qualified in-shop maintenance person or industry specialist. This booklet gives instructions that hazardous jobs in

particular must be handled by an industry specialist. Qualified in-shop maintenance person and industry specialist are

defined as follows.

Qualified in-shop maintenance person

A service staff shall have experience in operations of game machines. The staff shall be responsible for assembly,

installation, inspection and maintenance of the machine.

Industry specialist

An industry specialist must be engaged in designing, manufacturing, inspecting and servicing amusement machines.

He or she must have an education in electrical, electronic and mechanical engineering, and routinely maintain and

repair amusement machines.

Forbidden.

PR E C AUT I ONS F OR USE

Be sure to consult an industry specialist when setting

up, moving or transporting this product.

This product should not be set up, moved or transported

by any one other than an industry specialist.

When installing this product, set the 4 leg levelers evenly

on the floor and make sure that the product is installed

stably in a horizontal position. Unstable installation may

result in injury or accident.

When installing this product, do not apply undue force on

movable parts. Otherwise, injury and accident may result,

or the product may be damaged.

The machine for indoor usage only does not

install outside.

Do not set the game machine up near

emergency exits.

Protect the game machine from:

Rain or moisture.

Direct sunlight.

Direct heat from air-conditioning and heating equipment,

etc..

Hazardous flammable substances.

Otherwise an accident or malfunction may result.

Do not place containers holding chemicals or

water on or near the game machine.

Do not place objects near the ventilating holes.

Do not bend the power cord by force or place

heavy objects on it.

Never plug or unplug the power cord with wet

hands.

Never unplug the game machine by pulling the

power cord.

Be sure to use indoor wiring within the specified

voltage requirements. For extension cord, use the

specified rating or more.

Be sure to use the attached power cord.

Never plug more than one cord at a time into

the electrical receptacle.

Do not lay the power cord where people

walk through.

Be sure to ground this product.

Do not exert excessive force when moving

the machine.

For proper ventilation, keep the game machine

100mm(4″″

) away from the walls.

Do not alter the system related dipswitch settings.

W AR NI NG C AUT I ON

PR E C AUT I ONS F OR USE

If there is any abnormality such as smoke,

bad smell or abnormal noise being emitted

from the machine, immediately turn OFF the

main power switch and unplug the power cord from

the receptacle to stop operating it.

Using the machine in abnormal conditions could result

in fire or accidents.

Do not leave the power cord plugged in

improperly or covered with dust.

Doing so could resu t the power cord

periodically.

C AUT I ONW AR NI NG

Do not use this product anywhere other than

industrial areas.

Using in a residential area or an area next to a

residential area could affect signal reception of radios,

television sets, telephones, etc..

Do not give shock the surface of glass products.

Do not plug or unplug the power cord with wet

hands.

In handling the power cord, follow the

instructions below.

If the power cord or power plug becomes damaged,

stop using the machine immediately and ask your

nearest dealer to replace the parts.

1. Turn OFF the main power switch.

2. Unplug the power cord from the receptacle.

3 . Contact your nearest dealer.

In case of abnormality

Please do not play this game if

When you do drinking;

When your physical condition is not normal;

When you are in pregnancy;

When you have on a pulse controller;

When you have recently experienced a cramp or fainting

away while watching TV.

Avoid excessive force/shock while playing/moving the

game.

While do games, pay attention to surrounding.

Do not damage the power

cord.

Do not bend the power

cord excessively.

Do not heat the power

cord.

Do not bind the power

cord.

Do not sandwich the

power cord.

Do not modify the power

cord.

Do not twist the power

cord.

Do not pull the power

cord.

Do not stand on the power

cord.

Do not drive a nail into the

power cord.

PR E C AUT I ONS F OR USE

C AUT I ONW AR NI NG

Components in the game are sensitive to

vibrations and impact. Care should be used

when moving and transporting the game

machine.

Be sure not to let the machine tip over.

Before moving the machine, be sure to turn

OFF the main power switch, unplug the

power cord from the receptacle and remove

the power cord form the machine.

Before moving take the machine, off the levelers and

move it on the casters.

Avoid excessive force while moving the machine.

PR E CA UT I ONS

IN HA NDL ING

When setting up, inspecting, maintaining, moving or

transporting this product, follow the procedures and

instructions set forth in this manual and perform such

work safely.

Do not set up, handle, inspect, maintain, move or

transport this product under conditions equivalent to

the condition of "WARNING" or "CAUTION" specified

in this manual.

If a new owner is to have this product as a result of

transfer, etc., be sure to give this manual to the new

owner.

Be sure to turn OFF the main power switch

and unplug the power cord from the

receptacle before inspecting or cleaning the

machine.

When replacing parts, be sure to use parts of

the correct specifications. Never use parts

other than the specified ones.

Opening inside the machine shall be done by

machine specialist only as high electric

current is being sent inside. For game machine with

monitor, a care should be taken while opening its

back door. If not, a damage to the inside parts or the

monitor may occur.

If the sub power switch of the service panel

is turned OFF without turning OFF the main

power switch of the power supply unit, some

parts in the units remain live. When opening the

back door, be sure to turn OFF the main power

switch and unplug the power cord from the

receptacle.

Strictly refrain from disassembly and repair

of parts which are not indicated in this

manual, as well as settings and remodeling.

To clean the game machine, wipe it with a soft cloth

dampened in a neutral detergent.

Using thinner of other organic solvent or alcohol may

decompose the material.

Electrical shock or equipment failure could be caused

by water entering the inside of the machine.

NO PROBLEMS CAUSE COUNTERMEASURES REFERENCE

PAGE

REAR POWER S/W IS TURNED

OFF TURN ON THE REAR POWER S/W P39-⑥

FRONT POWER S/W IS TURNED

OFF TURN ON THE FRONT POWER S/W P17-②

FUSE IS BLOWN CHANGE A FUSE P19-②

VOLUME IS NOT ADJUSTED CHANGE VOLUME PCB P17-⑤

EXECUTE SOUND TEST MODE IN TEST MODE

CHANGE MAIN BD P18-①

EXECUTE SOUND TEST MODE IN TEST MODE P18-①

CHANGE CPU BD P18-①

CHECK COIN MECH IF IT HAS A SAMPLE MEDAL P15-②

CONTROL VR OF COIN MECH P15-②

CHANGE COIN MECH P15-②

CHECK COIN CONNECTOR P15-②

CHECK IF TICKET IS EMPTY

CHECK IF TICKET IS STUCK

CHECK CONNECTOR

CHANGE TICKET DISPENSER P22-④

EXECUTE TICKET TEST IN TEST MODE(8-1,

#3~#6 TEST)

CHANGE MAIN BD P18-①

CHECK THE ELECTRIC VOLTAGE IF YOU

MEASURE AT LEAST DC+12V P34-⑨

CHECK SENSOR P34-⑨

EXECUTE PENDULUM MOTOR TEST MODE IN

TEST MODE(8-1, #13~#14) P9

CHANGE A SOLENOID P21-⑦

CHANGE MAIN BD P18-①

THE MACHINE IS EMPTY FILL WITH BALLS P3-⑨

ELEVATOR DOES NOT WORK CHECK MICRO SWITCH(N.O) P32-⑮

CHANGE SOLENOID P20-④

CHANGE MAIN BD P18-①

RECONECT THE WIRES

CHANGE MAIN BD P18-①

WIRING HARNESS IS CUT RECONNECT THE WIRES

HARNESS CONNECTED TO THE

MOTOR IS FAULTY RECONNECT THE WIRES P32-16

EMPTY OF BALLS FILL WITH BALLS(4 BALL AT LEAST) P3-⑨

CHECK IF SWITCH(#5 OF 8-2) IS WORKS

PROPERLY IN TEST MODE P32-⑮

CHANGE MICRO SW P32-⑮

CHANGE MAIN BD P18-①

TROUBLESHOOTING TABLE

1 NO POWER ON GAME MACHINE

2 NO SOUND

MAIN BD IS CONDEMNED

CPU BD IS CONDEMNED

3 COIN ACCEPTER DOES NOT WORK COIN MECH REJECT COIN

4 TICKET IS NOT DISPENSED

RED LIGHT ON THE TICKET

DISPENSER

TICKET DISPENSER DOES NOT

WORK

5 PENDULUM DOES NOT MOVE MOTOR DOES NOT WORK

6 CUCKOO BIRD DOES NOT MOVE SOLENOID DOES NOT WORK

7 BALL IS NOT DROPED

SOLENOID DOES NOT WORK

8 DISPLAY LED DOES NOT WORK

CONNECTOR IS WRONG

9 ELEVATOR DOES NOT WORK

MICRO SW DOES NOT WORKS

PROPERLY

-13-

NO PROBLEMS CAUSE COUNTERMEASURES REFERENCE

PAGE

CHECK IF SWITCH(#11 OF 8-2) IS WORKS

PROPERLY IN TEST MODE P26-③

CHANGE MICRO SW P26-③

CHANGE MAIN BD P18-①

CHECK IF SW(#6 OF 7-2) IS WORKING

PROPERLY IN TEST MODE 35-16

CHANGE MICRO SW 35-16

CHANGE MAIN BD P18-①

CHECK SENSOR WIRING

CHANGE SENSOR P35-⑫

CHANGE MAIN BD P18-①

WIRING HARNESS IS CUT CHECK THE WIRING HARNESS

CONNECTOR IS FAULTY CHECK THE CONNECTOR

INPUT AND OUTPUT ARE

SWITCHED SWITHCH THE INPUT AND OUTPUT CONNECTOR

CHANGE FND BOARD P16-②,P23-②

CHANGE MAIN BD P18-①

DC POWER TO SMPS IS CUT OFF CHANGE THE SMPS P19-②,③

CONNECTION OF WIRING IS

WRONG RECONNECT THE WIRES

WIRING HARNESS IS CUT CHECK THE WIRES AND RECONNECT THE WIRES

MAIN BOARD IS FAULTY CHANGE MAIN BD P18-①

CPU BOARD IS FAULTY CHANGE CPU BOARD P18-②

SETUP SW2 IS BEING PUSHED P17-⑦

CHANGE SETUP BUTTON PCB P17-⑦

10

THE COIN IS PASSED THROUGH

THE HOLE OF PENDULUM, BUT

THE BALL IS NOT DROPPED

WIN MICRO SW DOES NOT WORK

PROPERLY

BALL OUT SW DOES NOT WORK

PROPERLY

11 THE SCORE ON THE WHEEL IS NOT

CORRECT ENCODER SNSOR IS FAULTY

12 THE LETTER ON THE FND IS

BROKEN

FND BOARD IS FAULTY

13

ELECTRIC POWER IS SUPPLIED,

BUT THE MACHINE DOES NOT

WORK

14 ALL SAVED DATE ARE DELETED SETUP SW IS WONG

-14-

QUANTITY MATERIAL

11SET SHEET Silk screen

21SET SHEET Silk screen

31SET SHEET Silk screen

41SET SHEET Silk screen

51SET SHEET Silk screen

61SET SHEET Silk screen

71SET SHEET Silk screen

82SET SHEET Silk screen

91SET SHEET Silk screen

10 1SET SHEET Silk screen

GARDEN PLATE A R

SHEET MCRC0SHE007

MCRC0SHE010

IMAGE NAME CDDE NO.

FRINT DOOR SHEET

COIN GUIDE BASKET

COVER A SHEET

GARDEN PLATE A L

SHEET MCRC0SHE006

MCRC0SHE001

MCRC0SHE002

COIN GUIDE BASKET

COVER B SHEET

FRONT UPPER SHEET

CUCKOO DOOR 01

SHEET

MCRC0SHE003

MCRC0SHE004

MCRC0SHE005

CRAZY CUCKOO SHEET (CEC TYPE)

2012.12.19 CRAZY CUCKOO SHEET (CEC TYPE)

GARDEN PLATE B L,R

SHEET

RECYCLE MARK SHEET

SEGA LOGO CUCKOO

SHEET MCRC0SHE009

MCRC0SHE008

11 1SET SHEET Silk screen

12 1SET BACK LIGHTING

13 1SET BACK LIGHTING

14 1SET ACRYL Silk screen

15 1SET ACRYL Silk screen

16 1SET ACRYL Silk screen

17 1SET ACRYL Silk screen

18 1SET ACRYL Silk screen

19 1SET ACRYL Silk screen

20 1SET ACRYL Silk screen

21 1SET ACRYL Silk screen

22 1SET ACRYL Silk screen

WHEEL COVER ACRYL

SHEET

MCRC0SHE022

GUIDE ACRYL 20X45

SHEET

GUIDE ACRYL 30X45

SHEET MCRC0SHE017

BONUS ACRYL SHEET

TOP DECO PET L

TOP DECO PET R

MCRC0SHE020

PENDULUM ACRYL

SHEET

MCRC0SHE021

MCRC0SHE018

HOW TO PLAY R

SHEET

TICKET OWED ACRYL

SHEET

MCRC0SHE015

GUIDE ACRYL 25X45

SHEET

MCRC0SHE013

MCRC0SHE014

MCRC0SHE012

MCRC0SHE016

TICKETS SHEET

HOW TO PLAY L

SHEET

ㅡ42ㅡ A4(210*297)

MCRC0SHE011

MCRC0SHE019

23 1SET SHEET Silk screen

24 1SET SHEET Silk screen

25 1SET SHEET Silk screen

26 1SET SHEET Silk screen

27

1SET SHEET Silk screen

28

1SET SHEET Silk screen

29

1SET SHEET Silk screen

30 1SET SHEET Silk screen

MCRC0SHE023

CRAZY CUCKOO SHEET (CEC TYPE)

2012.12.19 CRAZY CUCKOO SHEET (CEC TYPE)

BONUS GAME PLATE

CEC SHEET MCRC0SHE031

FRONT LOWER

UPPER SHEET MCRC0SHE027

FRONT LOWER

LOWER L SHEET MCRC0SHE028

SIDE LOW

L SHEET MCRC0SHE025

SIDE LOW

R SHEET MCRC0SHE026

CUCKOO DOOR 02

L SHEET

FRONT LOWER

LOWER R SHEET MCRC0SHE029

CUCKOO DOOR 02

R SHEET MCRC0SHE024

ㅡ43ㅡ A4(210*297)

800 Arthur Avenue, Elk Grove Village, IL 60007-5215 U.S.A

Telephone:

Toll free:

Facsimile:

http://www.segaarcade.com

42 Barwell Business Park, Leatherhead Road, Chessington, Surrey. KT9 2NY UNITED KINGDOM

Telephone:

Facsimile:

SEGA

+1-847-364-9787

+1-888-877-2669

+1-847-427-1065

+44 (0) 208-391-8081

+44 (0) 208-391-8099