Arcade Storm Racer G User Manual
2015-03-26
User Manual: Arcade Storm Racer G User Manual
Open the PDF directly: View PDF 
.
Page Count: 108
| Download | |
| Open PDF In Browser | View PDF |
OWNER’S MANUAL Ver.3.00 WARNING For safety reasons, please read the manual first before plugging in machine. Please keep this manual properly for convenient reference as needed. About This Manual Thank you for purchasing this product. The manual describes how to install, set up, use and maintain the product. The main purpose of the manual is to instruct how to operate the product correctly and safely. Please follow all the safety and warning instructions in the manual to avoid personal injury and product damage. This product may only be maintained by a technician. A technician mainly refers to a person who has obtained a certificate of senior middle school related to mechanical engineering, electrical engineering or at a level equal to that of technical senior middle school graduates, and is engaged routinely in the maintenance, management, repair of amusement machine. Please keep this manual properly for easy reference as needed. Moreover, if the operator entrust another party to operate, move, transport, install, maintain and repair the machine, please read relevant content and instruct concerned party to observe all the instructions and precautions in this manual regarding the particular action to be taken. When transferring the ownership of this product, be sure to provide this manual with the machine. For further information about the game and repair (including consumables), please contact our company. © GuangZhou Wahlap Technology Limited All Rights Reserved. Unauthorized reproduction of this document or any of its contents in any form is strictly forbidden. Table of Contents About This Manual 1. Safety Precautions ...............................................1 1.1 1.2 1.3 1.4 1.5 1.6 1.7 Warning Stickers .........................................................1 Placing Site .............................................................1 Safety Precautions ........................................................2 Precaution during Play .....................................................3 Transporting and Moving ..................................................3 Installing and Placing .....................................................4 Caution & Warning Stickers ................................................5 2. Product Description ..............................................6 2.1 2.2 2.3 2.4 2.5 2.6 2.7 Product Specification ......................................................6 Overview ...............................................................7 Spare Parts ..............................................................8 Shipment List ............................................................9 Packing List.............................................................11 Install Direction .........................................................12 Warranty ...............................................................13 3. Game Description ...............................................14 3.1 3.2 3.3 3.4 Appearance Design.......................................................14 Game Introduction .......................................................14 How to Play.............................................................14 Multiplayer Description ...................................................15 4. Test and Setting .................................................16 4.1 Game Description ........................................................16 4.1.1 GAME FEATURE ...................................................16 4.1.2 GAME CONTENT ...................................................17 4.2 Game FLOW ...........................................................20 4.2.1 Front-End MENU ...................................................20 4.2.2 In-Game MENU ....................................................26 4.2.3 Back-End MENU ....................................................32 4.3 Operator MENU .........................................................35 4.3.1 Arcade Operation Mode ..............................................35 4.3.2 Languages ........................................................36 4.3.3 Master Volume .....................................................36 4.3.4 Idle Volume ........................................................37 4.3.5 First Round Coins ..................................................37 4.3.6 Second Round Coins ................................................38 4.3.7 Winner Bonus ......................................................38 4.3.8 Auto Pedal.... .....................................................39 4.3.9 Game Time .... ....................................................39 4.3.10 Clock........ .....................................................40 4.3.11 Income ..........................................................41 4.3.12 Record ..........................................................41 4.3.13 Sound Testing ....................................................42 4.3.14 Light Testing .....................................................42 4.3.15 Button Testing ....................................................43 4.3.16 Calibration Steering (Auto)...........................................44 4.3.17 Calibration Foot Pedal and Boost (Manual) .............................45 4.3.18 Video Split Number.................................................46 4.3.19 Video ID .......................... . . . ...........................46 4.3.20 Patch... .........................................................47 4.3.21 IO ... ..... . .....................................................47 4.3.22 Reset... .........................................................48 4.3.23 Save ... .........................................................48 4.3.24 Game-Play Screen Information .......................................49 5. Maintenance and Service .........................................50 5.1 Maintenance and Service .................................................50 5.2 Part Replacement .......................................................51 5.2.1 Replacement of acrylic signboard .....................................51 5.2.2 Replacement of fluorescent plate.......................................51 5.2.3 Replacement of top light box ..........................................52 5.2.4 Key replacement ....................................................53 5.2.5 Replacement of pick-up head .........................................53 5.2.6 Replacement of coin acceptor .........................................54 6. Assembly .......................................................55 6.1 Assembly tree diagram ...................................................55 6.2 General assembly .......................................................56 6.2.1 Main wooden frame assembly .........................................58 6.2.2 Main frame assembly ................................................60 6.2.3 Motor assembly ....................................................61 6.2.4 Power box assembly .................................................62 6.2.5 Transformer board assembl ...........................................63 6.2.6 Service board assembly .............................................64 6.2.7 Speaker assembly ..................................................65 6.2.8 Right small light assembly ............................................66 6.2.9 Left small light assembly .............................................67 6.2.10 Plastic step box assembly ...........................................68 6.2.11 PCB board assembl ................................................69 6.3 Seat assembly ...........................................................70 6.3.1 Seat wooden crate assembly .........................................71 6.3.2 Upper assembly of seat ..............................................72 6.3.3 Mainframe assembly ................................................73 6.3.4 Backrest horn assembly ..............................................74 6.4 Plastic console assembly ..................................................75 6.4.1 Console keyboard assembly ..........................................76 6.5 LCD assembly ...........................................................77 6.6 LCD glass assembly ......................................................78 6.7 Pick-up head assembly ....................................................79 6.8 Billboard Assembly ......................................................80 6.9 Right side light assembly .................................................81 6.10 Left side light assembly ..................................................82 6.11 Push rod assembly .....................................................83 6.11.1 Handle assembly ..................................................84 6.11.2 Left side plate assembly ............................................85 6.11.3 Right side plate assembly ...........................................86 6.11.4 Drive shaft assembly ...............................................87 6.11.5 Electromagnet assembly ...........................................88 6.11.6 Suction block assembly ............................................89 6.12 Coin door assembly .....................................................90 6.13 Stepping cover assembly ................................................91 6.14 Pedal assembly ........................................................92 6.15 Upper assembly of back door plate ........................................93 6.16 Intermediate assembly of back door plate ...................................94 6.17 Steeling wheel assembly .................................................95 7. Printing Pattern ..................................................96 8. Wiring Diagram ..................................................99 9. After-Sales Service..............................................102 1. Safety Precautions 1.1 Warning Stickers In order to avoid injury to related people and damage to property, please observe the followings: PLEASE READ FIRST The following marks can be used to indicate the magnitudes of risk and damage caused by ignorance or improper operation: Warning means “may result in serious injury or death” Caution means “may result in minor injury or property damage” Serious Injury: Injury refers to the situations in which hospital treatment or long-term treatment will be accepted because of losing sight, getting hurt, getting burnt, electric shock, fracture or intoxication. Minor Injury Injury: refers to the cases that there is no need to go to hospital or accept long-term treatment. Property Damage Damage: refers to the damage of house, facility, or hurt of livestock and pet 1.2 Placing Site Warning please make sure the place line has been grounded before product installation, setup, testing, operation or repair This machine is designed for indoor use only. Never install the machine outdoors. Meanwhile, please avoid the following locations indoor： Direct sunlight, water leakage, damp and high temperature places. Near Flammable, volatile, or/and dangerous substance. Slope, unstable places or locations subject to frequent vibration. Near emergency exit, fire extinguisher or similar equipment. The rear part has the vent for heat emission from PC or screen. Don’t place anything nearby to avoid game failure. Provide a space of minimum 30cm between the rear of the machine and the wall for good ventilation and heat emission 1.3 Safety Precautions The owner shall pay attention to the followings when placing, checking and repairing machine to insure player’s security and avoid damage: Warning please check the voltage is 110V or 220V before the machine connectes to the power supply,or it may cause a fire or electric shock. Make sure to plug the game into 110V or 220V main outlet to avoid fire and electric shock. Make sure to turn off the power when performing maintenance and service to avoid electric shock or short circuit. Do not unplug or plug the plug instantly. Don’t touch the power plug with a wet hand to avoid electric shock. Don’t expose the power cord/grounding line on the passageway. Failure to do this will damage the power cord, causing electric shock or short circuit. Don’t lay anything near the power cord to avoid fire. Do not pull the power cord when unplugging, please hold the plug to avoid power cord damage, causing fire or electric shock. In case of power cord damage, please contact the local distributor for replacement Only use fuse and spare parts specified by our company Connect the connector firmly and tighten the screws. Do not dismount, replace or convert the product without our permission in order to avoid damage and human injury due to improper operation. Check and maintain the machine regularly. Keep “Warning stickers” clean and legible. Replace it immediately when the words are not legible or the dirt can’t be removed. Please contact our service center when performing any work that is not described in this manual, and follow the instruction provided. 1.4 Precautions during Play Caution In order to avoid injury and accident during play, the following people shall not play the game: People who are injured or less mobile. Person with poor health condition, such as hypertension or heart disease. Person wearing high-heeled or slippery shoes. Person who can’t touch the pedal. Pregnant woman, drunk people. When a player feels uncomfortable during play, remind the person to have a break, or stop playing. Make sure the player reads the warning labels and other indications, and plays in accordance with the instructions to avoid accidents such as electric shock and short circuit. Bystander shall not operate any button when the player is playing the game to avoid unnecessary trouble. 1.5 Transporting and Moving Caution Transporting When transporting the machine with an elevator, be sure to employ “Lift Point” to prevent accident and damage to the machine. To prevent movement when transporting the machine on a vehicle, please fix the casters and fully retract the adjusters. Failure to do this may cause damage to the machine. When carrying the machine with a forklift, be sure to insert the fork to fork position and lift stably. If not, it may cause accident and damage to the machine. The glass and LCD screen are fragile. Avoid violent vibration or shock when transporting. Moving Before moving the machine, unplug the power plug to prevent accident. Don’t damage the cord. Pay attention to the obstructions and uneven surface when moving the machine to prevent accident and damage to the machine. Fully retract all adjusters before moving to prevent accident and hazard. Make sure to use at least two persons to conduct the above work to avoid accident and injury Pay attention to the moving direction, see fig. 1.6 Installing and Placing Pay attention to the following when placing the machine. Caution Place the machine on the flat and slip resistant area. Use the adjusters to fix the machine (See diagram 1) 1.Loosen the nuts for the adjusters (clockwise), tighten the bolts with a wrench (clockwise). 2.Tighten the nut firmly(counter clockwise) and fix it well. bracket Lock nut Lock place Caster Adjuster Bolt Diagram (1) Provide a space of minimum 30cm between the rear of the machine and the wall for good ventilation and heat emission (See diagram 2). Wall Diagram (2) 1.7 Caution & Warning Stickers Inside 680 270 雷动G 680 270 Or 6A SRF-P0040 Power 2. Product Description 2.1 Product Specification Location Dimension Rated Voltage Frequency Power Consumption Weight Temperature Range Indoor Only 1050(W)×1730D)×2075H) 2075mm 220V 50Hz 680W 270kg 5~40 。 C 1050mm 1730mm Front View Side View 6 2.2 Overview Side View Rear View Top View Bottom View 7 2.3 Spare Parts light box top decorative acryl Pick-up head side decorative acryl Display steering wheel console speaker handle seat service door Base 8 2.4 Shipment List Packing Carton 1 STORM RACER G 4 1 270 kg 1147×1094×2240 Complete Unit 1 3 1 1 1 5 1 6 1 2 1 6 SRF-9901E05 框体限位木条02 实木 20*40*1077 1 5 SRF-9901E04 框体限位木条01 实木 20*40*400 1 耐水3C1100G T-10 耐水3C1100G T-10 4 SRF-9901E03 3 SRF-9901E02 2 SRF-9901E01 框体天盖 框体地台 1 1 1 1 主框体组件 1 序号 SRF-0100000-A 图 号 框体围框 名 称 材料/规格 9 数量 备注 2 条形码粘贴处 Packing Carton 2 STORM RACER G 85 kg 905×685×1490 Chair、Accessary Carton 2 1 2 5 1 7 1 6 2 3 1 4 1 1 1 7 6 SRF-0000A01 附属品箱 345*255*110mm 框体连接铁 SPCC-1.5T 1 2 5 SRF-0200000 座位组件 4 SRF-9902E04 座位限位木条02 实木 20*40*865 3 SRF-9902E03 座位限位木条01 实木 20*40*565 1 座位无底半页箱 耐水3C1100G T-10 1 1 2 SRF-9902E02 1 SRF-9902E01 序号 图 号 1 座位地台 名 称 材料/规格 10 1 数量 备注 2 条形码粘贴处 2.5 Packing List Please check the following items after purchasing our product. If any part missing or damaged, please contact our sales person! Description Specification Quantity Powerline 3m（1.0m㎡) 250V 1 key 5555 key 2 flatgasket Φ6*Φ20*2.0 16 Spring gasket M6 16 outer hexagon M6*40 16 Reticle AMP gigabit 10M 1 1 OWNER’S MANUAL 11 Remarks 2.6 Install Direction Steps 、 After opening the packing cartons 1 and 2, find the carton of accessories and outer hexagon M6*40 with flat spring washer shown as following figure. 、Assemble the machine by using the method shown in following figure. outer hexagon M6*40 Special attention:When special case occurs in shipment, please check “Installation guide” in attachment box of shipment, and make assembly according to installation guide; special supplement will not be made in this instruction. 12 2.7 Warranty Scope Inquiry regarding product can be assisted for free. The warranty scope for consumables and durables may differ from product to product. Please contact our after-sales service center for detailed information. The right of final interpretation is reserved. Exclusive Damage caused by force majeure such as god will. Failure caused by carelessness, such as water contact, falling down, toppling, knocking. Failure caused by disobeying the instructions in this manual. Failure caused by operating the machine on inappropriate site. Change the original design and configuration for the game without notice. Failure to perform regular service and clean. Failure to fix the product in line with the manual’s requirement. Malfunction or part damage caused by electromagnetic interference other electronic equipments generated. Non-warranty Consumables Light tube and bulb Button lamp and switch Fragile items Solenoid Other spare parts 13 3. Game Description 3.1 Appearance Design This machine has fashionable and beautiful appearance. The whole machine uses blue and black color tone and acrylic decoration permeable to light is used on its sides to let the blue light be visible when light is on, while the racing game is shown on the top decorative acryl, without excessive decoration on the whole machine, so that the machine gives a stylish and elegant feeling. With respect to the operation, continue the usual mode of operation in racing game so that it is easier for the player to use and manipulate it. 3.2 Game introduction Thunderous racing is a racing game, which uses 37inch LCD display, possesses 720DP HD screen with 60 frames per second; the whole game has six characteristic scenes, 12 race tracks, four difficulty levels of primary, intermediate, higher and extreme; support the multiplayer of at most 8 persons; in game, the sports car has strong individuality, with highly sensitive control performance and new thunderous acceleration system, so that different sports cars possess different operational advantages on different race tracks. 3.3 How to play 1、Use the traditional mode of operation including steeling wheel+pedal, at the same time, add the unique accelerator handle; 2、The game rules: after coin, press START (START) key or step on the gas to enter into the screen of selecting the race track, turn the steeling wheel for left and right selection, after the race track is determined, select the sports car by using the same method, after pressing START key, the game has begun and the sports car is ready, by stepping on the gas, you can play the game; the condition of accelerometer is shown on bottom right corner of screen, after certain thunderous value is collected, push the manual gear lever forward to enable the acceleration function of sports car. 14 3.4 Multiplayer Description if the multiplayer game is played in the store, please refer to the following figure (take the connection of four machines as the example) and connect the network cables of mainframes of all machines to the jacks of broadband router. For broadband router, Wide Band Router 1P 2P 3P 4P Remarks: 1. Please confirm the model of broadband . 2. This wiring diagram is only for reference and the actual connection method is possibly different due to network environment. 15 4. Test and Setting 4.1 Game Description 4.1.1 GAME FEATURE • Up to 8 Players (LAN) • HD 720p Resolution • 30”inches screen • 60 Frames per Second; High Sense of Speed with Fluent Game Play • Online Patching /Upgrade Support • Cloud-based Server -Advantage: Stable Internet Speed for All Regions • Classic Arcade Racing Style • Auto/Manual Drift Mode for Beginner/Expert • Competitive AI • Full Force Feedback Steering Wheel • Unique Throttle for Boost • 4.1 Sound System • Vibration Speakers under the Seat simulate Car Response • Intense Game Play Embedded with Camera Kit • Compatible Low Maintenance Cost PC with Sandy Bridge Standard • Total of 12 Tracks with 6 Hidden Tracks; Total of 14 Cars with 7 Hidden Cars 16 4.1.2 GAME CONTENT Tracks There are total of 12 tracks in 4 difficulties: Beginner, Advance, Expert and Extreme (appeared in Reverse Tracks only).The game will begin with 6 Tracks – • Circuits Of Rivers • Ruin Temple • The Heights • Pearl City • Stone Forest • Snow Mountain 6 Hidden Tracks could be unlocked by counting how many G Coins the player has gained in every game. 17 How to Unlock Hidden Tracks? An energy bar is shown to show the player how many G Coins he has gained in the last game and how many more he has to achieve in order to unlock certain hidden tracks. Single-Play Mode: • A new hidden track will be unlocked by counting how many G Coins the player has gained in every game. Multi-Play Mode: • A new hidden track will be unlocked by counting how many G Coins by all players have gained in every multi-play game. For example: 4players finished a game- track Circuits of River Player Player 1 Player 2 Player 3 Player 4 Position 1st 2nd 4th 6th G Coins gained 50 30 15 15 18 Total 110 Unlock Track Circults of River Cars There are a total of 14 cars. The game will begin with 7 Main Cars. 7 Hidden Cars could be unlocked by random. 7 Main Cars are in different levels: Beginner, Intermediate and Advance (Expert cars appeared in Hidden Cars only). How to Unlock Hidden Cars? Single-Play Mode & Multi-Play Mode: • A new hidden car will be unlocked in every game by random. • 2 new hidden cars will be unlocked by The Champion in every game by random. 19 4.2 Game FLOW 4.2.1 Front-End MENU Scene 1: Logo Logo of Wahlap and Insoft will be appeared in the beginning. 20 Scene 2: Intro Video (with learning video) The Game Introduction video will be played. Learning videos will be appeared in between. 21 Scene 3: Insert Coins A screen of insert coins will appear to ask player to start the game. Scene 4: Selecting Track In the Track Selection screen, there are a total of 12 tracks with 6 hidden tracks (to be unlocked). Tracks are divided into four difficulty levels: Beginner, Intermediate, Superior and Extreme, allowing players to challenge different difficulty levels. Please use the steering wheel to turn left and right to select and then press the [START] button or step on the accelerator. 22 Scene 5: Selecting Car In the Car Selection screen, there are a total of 14 cars with 7 hidden cars (to be unlocked). Cars are divided into three levels: Entry, Medium and Professional, drift and turn Bay deceleration is different at different levels. Cars are presented in four different numerical rating to show their unique performance advantages: 1: Boost Gauge (that can influence the thunderous value, the value of thunderous acceleration forces) 2: Maximum Speed (The maximum speed in the general case) 3: Steering (there will be some advantage in a variety of Bay Road on the track) 4: Acceleration (speed of accelerate and overcome the rugged track) Please use the steering wheel to turn left and right to select and then press the [START] button or step on the accelerator. Each racing car could be set Drift Mode as: Automatic Drift OR Manual Drift 23 Scene 6: Camera Players will be invited to take icon photos which will be displayed in the race. A photo is shot after a count down from 5 to 1. …4…3…2… 24 Scene 7: “Free to Join” Multi-Players Race Status Screen In a multi-player race, after selecting tracks and cars, a status screen will pop up to show the data of each player of this race (cars selected, own photo icons, level of players). Players who are still selecting cars will be displayed as “Getting Ready” instead of his own data. The selected track will be displayed in the middle as well. Scene 8: Loading Screen Learning Messages will be shown as loading screen. 25 4.2.2 In-Game MENU Scene 9: In-Game Screen Game START Race starts at once right after the loading is finished. UI Screen (I) When the Race begins, data of the Race will be displayed around four sides of the screen. 2 1 3 4 1. LAP: No. of Laps 2. TIME: Count Down (in seconds) 3. POSITION: Ranking of player 1-3 will change to RED in color in the last 60 seconds of the race. 4. Map: represents Player represents other Players 26 UI Screen (II) When the Race begins, data of the Race will be displayed around four sides of the screen. 5 6 7 8 9 5. Display of curve player will pass. 6. Data of player(s) in front. 7. Display of all players ranking. 8. Tips of reminding player to turn on the Nitrogen Meter Boost. 9. Data of player(s) behind. 10. Nitrogen Meter. Status of Nitrogen Meter Boost: Normal, Charging and Full (from left to right) 27 10 UI Screen (III) “Boost Charger” status is shown at the bottom centre, displaying the status of Boost Amount. Display 1: Boost Charger - Drift Charge. Display 2: Boost Charger - Boost Maximum 28 Display 3: Boost Charger - Out of N2O 5 Display 4: Brackets - Using Boost (The Red Brackets drops, representing amount of N20 is dropping when using boost) 29 Multi-Play Mode – Free Join In the first 30 seconds* of the battle, other players can join the race. Race will start all over again if new player is joined. All players will select tracks and cars again. 30 Scene 10: FINISH Game The race is over when time is up. Position of the player will be shown. 31 4.2.3 Back-End MENU Scene 11: Race Ranking After the race is finished, a Final Ranking of all players will be shown. 1. Ranking of the tournament • Levels: S 、A、 B、C • S as the Supreme ranking; C as the lowest ranking 2. Tournament Data a. Photo of player b. Selected Car c. Total Time 3. Medals obtained 32 Scene 12: Unlocked Item A page of unlocked items will be shown. Players can show if any cars or tracks have been unlocked successfully in the race they just finished. New track is unlocked: New car is unlocked: 33 Scene 13: Continue -For Winner: Bonus Round (Discount Game) Winner of the tournament will be awarded to continue the game with discount. -For Other Players: Game Over, Continue to Play Players will be invited to continue the race to challenge and become the Winner. 34 4.3 Operator MENU 4.3.1 Arcade Operation Mode 1. Under the Demo screen, press the [Test] key of the coin control box to enter the [Arcade Operator], the main menu is shown below. 2. Enter the menu screen, use the arrow keys to select a menu item, press the [Test] key to enter the sub-menu, follow the screen prompt message at the bottom-right side. 3. After the setup is completed, select [Save] in the main menu, then press the [START] button or press the [services] to exit the user interface. 35 4.3.2 Languages You can select the operating language in [Language]. 1. Enter the [Arcade Operator] > [Language], use the left and right arrow keys to switch to the desired language. 4.3.3 Master Volume In [Master Volume], you can set the outputs of the volume of sounds by the arcade machine. 1. Enter the [Arcade Operator] > [Master Volume], the inputs of the volume are set between 0-1. 36 4.3.4 Idle Volume In [Idle Volume], you can set the outputs of the volume of sounds by the arcade machine. 1. Enter the [Arcade Operator] > [Idle Volume], the inputs of the volume are set between 0-1. 4.3.5 First Round Coins In [First Round Coins], you can set the number of coins per game need to invest per race. 1. Enter the [Arcade Operator] > [First Round Coins], the inputs of the number of coins inserted set between 0-10. 37 4.3.6 Second Round Coins In [Second Round Coins], you can set the number of coins per game need to invest per race. 1. Enter the [Arcade Operator] > [Second Round Coins], the inputs of the number of coins inserted set between 0-10. 4.3.7 Challenger Join Time In [Challenger Join Time], you can choose whether to allow challenger to join the race or not within 15 or 30 seconds after the race is started. 1. Enter the [Arcade Operator] > [Challenger Join Time], choose “15 seconds” or “30 seconds” to enable challengers to join race and “Disable” to turn it off. Can be set as: Enable 15 seconds OR 30 seconds 38 4.3.8 Auto Pedal In [Auto Pedal], you can choose whether to turn on the auto pedal or not. 1. Enter the [Arcade Operator] > [Auto Pedal], choose “Yes” to enable auto pedal and “No” to turn it off. 4.3.9 Game Time In [Game Time], you can choose whether to set the length of the game time. 1. Enter the [Arcade Operator] > [Game Time], choose “Short” to enable a shorter game time and “Long” to enable a longer game time. 39 4.3.10 Clock In [Clock], you can set the system time. 1. Enter the [Arcade Operator] > [Clock]. Use the arrow keys to select [Clock], and then press the [START] button to expand the options of time setting. 2. Use the arrow keys to select the item you want to set, and then use the left and right arrow keys to switch the setting value, after the setup is complete, select [Settings] save [Clock] is set. 3. After the setup is saved, select [Clock] again to hide the setting projects, and continue to operate. 40 4.3.11 Income In the page [Income], you can go through the revenue-related information of the machine. 1. Enter the [Arcade Operator] > [Income], selection screen is as follows: • Left Hand Side: Revenue record of the week, from Sunday to Saturday. • Right Hand Side: Revenue record of the year, from January to December. 4.3.12 Record In the page [Record], you can set the machine's operating system settings. 1. Enter the [Arcade Operator] > [Record], selection screen is as follows: • [Records] records all tournament games which have been completed. • Left Hand Side: Vehicle models: the frequency of use • Right Hand Side: Tracks Name: the frequency of selection 41 4.3.13 Sound Testing In the page [Sound Testing], you can set the machine's operating system settings. 1. Enter the [Arcade Operator] > [Sound Testing], selection screen is as follows: 2. In [Sound Testing], use the left and right arrow keys to select the item you want to test, selected speakers (RED light) will play the test automatically and continuously. • Normal Playback: Use the left and right arrow keys to select the set of speakers (1 to 6) you want to test with. • If there is no sound, check whether the volume buttons are set at the minimum level, if there is still no sound, please operate the speaker troubleshooting. 4.3.14 Light Testing In the page [Light Testing], you can test if each set of lights (1 to 7) is in normal condition. 1. Enter the [Arcade Operator] > [Light Testing], selection screen is as follows: 2. In [Light Testing], use the left and right arrow keys to select the item you want to test. • This test can operate a total of eight options, from 0-7. • The selected item (RED light) will automatically light for testing. 42 4.3.15 Button Testing In the page [Button Testing], you can test if buttons are in normal condition. 1. Enter the [Arcade Operator] > [Button Testing], selection screen is as follows: 2. In [Button Testing], use the left and right arrow keys to select the item you want to test. This test has a total of four options. • [START] button y function • [VIEW] button function • Accelerator handle - Push function • Accelerator handle - Pull function 3. Press the button which is needed to be tested, the button displayed on the screen will light up in RED for normal condition. 43 4.3.16 Calibration Steering (Auto) In the page [Calibration Steering (Auto)], you can test and proofread the sensitivity of the steering wheel and handling. 1. Enter the [Arcade Operator] > [Calibration Steering (Auto)], selection screen is as follows: 2. In [Calibration Steering (Auto)], the steering wheel will calibrate automatically to show the test value. • This calibration project is divided into three categories: Left in Most-Valued: Left-turn torque of the steering wheel Center: the steering wheel in the median position; Right in Most-Valued: Right-turn torque of the steering wheel 3. When turning the steering wheel, numerical changes with the rotation rate. When turning to the Most-Right, the indicated value is about 255; 0 when turning to the Most-Right. 4. The value of the steering wheel is displayed in the Calibration Result column. The First column is the Actual-calibrated value; the Second column is the Ideal-calibration value. 5. The calibration value must be in the range of 5% of the ideal value, or criticized as sub-standard. 6. The lowest column will be displaying the Rating Symbol: “ ✔ ” tick as qualified; " X " cross as sub-standard, adjustment is required. 44 4.3.17 Calibration Foot Pedal and Boost (Manual) In the page [Calibration Foot Pedal (Manual)], you can test and proofread the sensitivity of the foot Pedal. 1. Enter the [Arcade Operator] > [Calibration Foot Pedal (Manual)], selection screen is as follows: 2. There are two projects in this calibration operation: • Throttle: By stepping the throttle, the value will be changed. By stepping the throttle to the most, the value should be around 255; If the throttle is not be stepped, the value should be around 0. • Brake: By stepping the brake, the value will be changed. By stepping the brake to the most, the value should be around 255; If the throttle is not be stepped, the value should be around 0. 3. The maximum and minimum values of the throttle and brake should be within 10% of the ideal value. The lowest column will be displaying the Rating Symbol: “ ✔” tick as qualified; " X " cross as sub-standard, adjustment is required. 45 4.3.18 Video Split Number In the page [Video Split Number], you can choose how many machines you want to split the video as display. 1. Enter the [Arcade Operator] > [Video Split Number], selection from 1 to 8 machines. 2. There are three displays in this operation: • Machine: The machine number. • Video: The sequence of video in the machine. • Network: The network status: On or Off 4.3.19 Video ID In the page [Video ID], you can set the video ID of the machine. 1. Enter the [Arcade Operator] > [Video ID], selection from 1 to 8 machines. 2. There are three displays in this operation: • Machine: The machine number. • Video: The sequence of video in the machine. • Network: The network status: On or Off 46 4.3.20 Patch In the page [Patch], you can do the patching. 1. Enter the [Arcade Operator] > [Patch], selection screen is as follows: 4.3.21 IO In the page [IO], you can check if there is any IO device. 1. Enter the [Arcade Operator] > [IO], selection screen is as follows: 47 4.3.22 Reset In the page [Reset], you can set up to restore all settings to the original settings. 1. Enter the [Arcade Operator] > [Reset], selection screen is as follows: 2. Select [Reset] and then press the [START] button in the arcade. All settings will be restored to default, all arcade records will be cleared. 4.3.23 Save In the page [Save], you can save all the settings in the setup. 1. Enter the [Arcade Operator] > [Save], selection screen is as follows: 2. Select [Save] and then press the [START] button, all settings will be saved. 48 4.3.24 Game-Play Screen Information In the below of the [Game-Play screen], 2 pieces of information about the game and machine is shown. 1. Down Left-corner. Main Version: 1.5.12 Build Version: 1808 2. Down Right-corner V – Video ID: 1 M – No. of machines connected LAN: 1 R : (for development purpose) 49 5. Maintenance and Service 5.1 Maintenance and service Even though the machine works normally for a long time, the fault will occur. Therefore, please perform routine check and maintenance concerning the following to ensure a long-term use. External Inspection Stick “Warning” stickers correctly, keep it legible. Firmly tighten the bolt for each adjuster. Tighten screws for speaker assembly. Tighten the signboard firmly. Check if the screws fixing the parts loose. Check if the connectors loose or missing. Operation Inspection (With power on) Sound is normally emitted from the speakers or not. Fluorescent lamps and button lamps light up or not Coin acceptor works properly or not. Lifting and falling devices work properly or not. YZ sensor works properly or not. After completing all the checks, operate the game again and check the above items with full care! Servicing (conducted by a technician only) Cut off the main power supply to avoid injury or electric shock when performing maintenance. Please contact our service center when performing any work that is not specified in this Manual, and follow the instruction provided by the service center. For consumables and spare parts (including screws), please use products specified by Wahlap Technology. Even though the main power is cut off, there is still high temperature and high pressure in the power board and the monitor. The person will be burnt or get an electric shock if he touches such parts. Please pay full attention to avoid contact. Be sure to cut off the main power when you alter a spare part or unplug a connector. 50 5.2 Part Replacement 5.2.1 Replacement of acrylic signboard 1.Remove the screws on the acrylic signboard for replacement. 5.2.2 Replacement of fluorescent plate 1. Open the back door shown in the figure. 2. Reverse the opened back door and find the fluorescent tube requiring being replaced for replacement. 51 5.2.3 Replacement of top light box LED 1. After removing the screws used to fix the light box on the top of the machine, open the back door of the machine. 2. Find the connecting wire of the light box, pull out the rubber seat terminals and remove the light box. 3. Remove the fluorescent plate on the light box for replacement. 52 5.2.4 Key replacement 1. Remove the fixing screws of key board. 2. Remove the keyboard, pull out the terminals and replace the key. 5.2.5 Replacement of pick-up head 1. After removing the acrylic panel, remove the fixing screws on the pick-up head. 2. Open the back door and remove the fixing screws on the rear cover of the pick-up head. 3. Remove the pick-up head and fixing components and replace the pick-up head after removing the fixing screws. 53 5.2.6 Replacement of coin acceptor 1. Remove the fixing screws with the slotted screwdriver, take out the stop plate, remove the coin acceptor, pull out the terminals and replace the coin acceptor. 54 6. Assembly 6.1 Assembly tree diagram 55 56 D C B A 1 21 1 13 1 29 4 37 4 28 1 27 1 1 2 1 16 1 29 6 5 1 7 1 30 6 17 2 9 1 29 4 35 16 6 1 2 33 16 2 36 22 22 1 30 6 35 4 8 1 33 4 34 4 3 1 1 3 SRF-1100000 SRF-1000000 SRF-0900000 11 10 9 SRF-0600000 SRF-0500000 SRF-0400000 SRF-0300000 6 5 4 3 No. 4 Draw No. 2 SRF-0200000 1 SRF-0100000 SRF-0700000 7 SRF-0800000 SRF-1200000 12 8 SRF-1300000 SRF-1400000 14 13 SRF-1500000 15 Name General ASSY Seat ASSY 5 Plastic console ASSY LCD ASSY LCD glass ASSY Pick-up head ASSY Billbord ASSY Right side light ASSY Left side light ASSY Push rod ASSY Coin door ASSY Stepping cover ASSY pedal ASSY Upper ASSY of back door ASSY of back door plate Steeling wheel ASSY SRF-1600000 16 intermediate Fixed iron frame 17 SRF-0000A01 SRF-0000A02 Plastic console fixed iron Back door U 18 Block plastic SRF-0000B01 20 SRF-0000C01 19 The steering wheel decoration piece 21 SRF-0000C02 Material/Spec. SPCC-1.5T HDF-15.0T Black ABS Blue ABS M4*30（Black） SD2 Pedal ASSY 22 5 23 4 6 Code 1.1.WA10E00010 1.1.WA10E00020 1.2.WA10E00010 1.8.WA10E010 1.8.WA10E020 2.1.IG040420 1.6.LS243011 Qty.Product 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 1 1 1 1 1 10 6 D C B A 6.2 General assembly(1） 57 Draw No. Name 1 2 Material/Spec. 29 4 12 1 31 4 32 4 3 Qty. Product Code 11 1 24 10 No. Draw No. 29 4 14 1 Name 23 4 4 1 5 19 1 35 6 5 23 4 15 1 36 22 23 2 Material/Spec. 33 6 Qty. Product Code 6 B A 4 6 D 20 1 10 1 3 1 18 1 4 D 26 4 25 4 3 C No. 24 4 2 C B A 1 General assembly(2） 58 D C B A 1 39 8 48 6 8 1 37 4 22 1 37 4 1 43 2 44 2 47 6 33 8 4 1 43 4 2 1 39 4 42 18 6 2 42 6 37 4 7 1 36 8 24 1 38 2 19 2 17 1 41 2 36 4 49 1 6 2 46 6 36 4 1 39 2 11 1 13 1 15 1 9 1 2 37 4 45 8 16 1 5 1 37 2 39 4 2 30 1 20 1 21 1 39 2 38 4 26 1 37 6 25 1 52 4 3 3 2 1 1 Bass Cover 22 SRF-0100A12 SRF-0100A07 SRF-0100A06 SRF-0100A05 17 16 15 SRF-0107000 SRF-0106000 SRF-0105000 7 6 5 4 4 SRF-0104000 3 SRF-0103000 2 SRF-0102000 1 SRF-0101000 No. Draw No. SRF-0108000 8 9 Name 5 Main wooden frame Assy Main frame ASSY Power box ASSY Transformer board ASSY Service board ASSY Service board assembly RIGHT small light ASSY LEFT small light ASSy Plastic step box ASSY PCB Board ASSY SRF-0110000 SRF-0109000 Corner iron Frame Iron R 10 SRF-0100A02 12 Frame Iron L Monitor fixed iron under Transformers planks fixed iron Fixed glass transom Console fixed iron Strengthening iron console R Strengthening iron console L 11 SRF-0100A01 SRF-0100A03 13 SRF-0100A04 SRF-0100A08 18 14 SRF-0100A09 19 Plastic edge fixed iron Camera light barrier 23 SRF-0100A13 Pedal under cover Console cover under 24 SRF-0100A14 20 SRF-0100A10 Coin plate 25 SRF-0100A15 21 SRF-0100A11 Light Box Acrylic Speaker fixed iron 5 26 SRF-0100D01 27 sr1-0000a03 4 2 Material/Spec. SPCC-1.2T SPCC-1.2T SPCC-1.2T 1.1.WA10E00030 1.1.WA10E00040 1.1.WA10E00050 1.1.WA10E00060 1.1.WA10E00070 1.1.WA10E00080 1.1.WA10E00090 1.1.WA10E00100 1.1.WA10E00110 1.1.WA10E00120 1.1.WA10E00130 1.1.WA10E00140 1.1.WA10E00160 1.1.WA10E00160 1.1.WA10E00660 1.7.WA10E00010 1.1.WA10A00030 6 1 1 1 1 1.2.WA10E00020 Qty. Product Code 1 2 1 1 1 1 1 1 1 2 1 SPCC-1.5T SPCC-2.0T 1 1 2 2 1 1 1 1 1 1 1 SPCC-1.2T SPCC-2.0T SPCC-2.0T SPCC-1.2T SPCC-1.2T SPCC-1.2T SPCC-1.0T SPCC-1.5T PMMA-3.0T SPCC-1.5 6 D C B A 6.2.1 Main wooden frame assembly (1） 59 D C B A 1 1 38 4 23 1 40 4 14 2 2 2 10 1 12 1 50 4 36 8 3 1 31 2 41 2 37 3 32 1 51 4 27 2 3 35 4 3 34 4 28 1 29 2 39 4 No. 4 Draw No. 4 Name 5 5 Material/Spec. 6 Qty. Product 6 Code D C B A Main wooden frame assembly（2） 60 D C B A 1 1 8 24 2 2 5 4 3 4 3 3 2 2 6 2 7 2 4 2 1 1 Draw No. 4 5 WAH-0000A04 SRF-0101B01 2 1 No. WAH-0000A05 3 1 2 4 2 4 2 2 24 6 Material/Spec. Qty. Product Code 6 HDF SPCC-2.0T SPCC-2.0T SPCC-2.0T WAH-0000A06 4 M16*Y100 6 2.5 M16 5 M6*35 8 Name 5 7 4 D C B A 6.2.2 Main frame assembly 61 D C B A 1 4 1 15 2 1 10 1 17 3 18 3 14 3 1 16 3 13 1 8 2 2 2 18 4 6 1 3 2 17 4 1 1 15 2 16 4 11 1 7 1 2 1 19 1 3 5 1 12 1 3 9 1 M4*8（Black） 15 SRF-0102A03 3 No. 4 Draw No. 2 SRF-0102A02 1 SRF-0102A01 SRF-0102A04 4 Meter PCB 10 Name Iron shaft support Front Motor fixed plate 5 Panel lights fixed iron A Panel lights fixed iron B Motor bushings Shaft key Swing motor shaft Swing axle pad VR fixing plate DC motor 11 SR1-0501A07 SR1-0501A05 SR1-0501A04 SR1-0501A03 SR1-0501A02 Potentiometer 12 9 8 7 6 5 Bearing 13 Material/Spec. 6 Code 1.1.WA10E00170 1.1.WA10E00180 1.1.WA10E00190 1.1.WA10E00200 1.1.WA10A00230 1.1.WA10A00240 1.1.WA10A00250 1.1.WA10A00260 1.1.WA10A00280 1.4.IC901780 1.4.MD100022 1.4.VR150220# 1.4.ZC001010 1.6.LS830021 1.6.LS840021 1.6.DP108031 1.6.DP208011 1.6.LSM82011 1.6.LST50011 Qty. Product 1 1 2 SPCC-1.2T SPCC-3.0T SPCC-3.0T 1 1 2 1 1 1 1 1 1 1 3 4 7 1 7 7 6 SPCC-1.2T 45 45 45 SPCC-1.0 WL_PCBO_0001_0010 112ZY100-40 B-5KΩ 270 PF205 M3*8（Black） φ8*φ16*2.0（Black） 16 14 M5*6（Black） M8*20（Black） M8（Black） 5 19 18 17 4 D C B A 6.2.3 Motor assembly 62 D C B A 1 6 1 1 8 2 4 1 3 1 1 1 2 2 5 1 3 3 9 1 7 1 No. 4 Draw No. SRC-0401UK SRF-0103A01 2 Rocker Switch 5 4 3 1 Fuse tube 6 5 Name Power Fixed Box 5 Rail Network port fixed iron Fuse tube Filter twork Adapter 9 2 7 9 8 2 1 4 Material/Spec. SPCC-1.2T SPCC-1.0 4P KCD7-2211N 15GEEG3E 10A/250V F15A/125V F6A/6*30 250V M3（Color） M3*12（Black） 1.1.WA10E00210 1.1.SE11A00170 1.4.BX300020 1.4.LB100020 1.4.SW604010 1.4.BX106010 1.5.XC201030 1.6.LS831021 1.6.LM203013 6 Qty. Product Code 1 1 1 1 1 1 1 3 2 6 D C B A 6.2.4 Power box assembly 63 D C B A 1 1 6 4 6 4 4 1 3 1 5 1 2 2 7 2 1 2 1 8 4 3 3 1 1 No. 4 Name 5 Transformer Draw No. HL1100W 220V/110V Toroidal transformer 3 2 Transformer fixed plate 220V/110V转16-0-16V Transformer 4 1 RS-150-12 Power supply 5 250W M3*12（Cr） M4*16（Black） Material/Spec. MDF-15.0T 350W 110V/110V-14V M5*16（Black） 8 5 7 6 SRF-0104B01 4 6 Code 1.2.WA10E00030 1.4.BY111010 1.4.BY307010 1.4.BY203040 1.4.DY06A010 1.6.LS841031 1.6.LS331022 1.6.LS851021 Qty.Product 1 1 1 1 1 2 8 4 6 D C B A 6.2.5 Transformer board assembl 64 D C B A 1 1 3 4 5 3 2 2 2 1 3 3 1 1 4 3 4 5 Counter Service key plate 2 1 Name Button 3 Draw No. Volume VR No. Potentiometer kNo.b 4 5 5 SRF-0105A01 4 Ф13mm Material/Spec. SPCC-1.2T DC 5V SDP-103C-22RB VR-B10KΩ 6 Code 1.1.WA10E00220 1.4.JS100020 1.4.AJ500012# 1.4.VR160010 1.4.VR201310 Qty. Product 1 1 4 3 3 6 D C B A 6.2.6 Service board assembly 65 D C B A 1 1 7 4 3 1 5 4 2 6 4 2 1 1 2 2 4 1 3 3 No. 4 Draw No. SRF-0106A01 Name Speaker seat fixed iron Speaker boxes fixed iron SR1-0503A01 2 1 6 Qty. SPCC-1.2T Material/Spec. 2 1 SPCC-1.2 Product Code 1.1.WA10E00230 1.1.WA10A00310 1.2.WA10A00030 1.4.YS204031 1 1 1.6.LS840021 1.6.LS341021 1.6.LS841021 4 4 4 6 MDF-9.0T 4吋 4Ω/25W Speaker(round) Speaker boxes SR1-0503B01 M4*8（Black） 5 4 M4*12（Black） 6 3 M4*12（Black） 5 5 7 4 D C B A 6.2.7 Speaker assembly 66 D C B A 1 1 2 2 1 1 3 1 3 3 5 4 4 1 6 4 2 1 4 Draw No. Name Light box R 5 SRF-0107A02 SRF-0107A01 2 1 No. LED light box cover SR1-0701D01 3 Light boxes fixed iron R Lightbox PCB 5 7 6 5 4 7 2 4 Material/Spec. SPCC-1.0T SPCC-1.2T M4*8（Black） M3*8（Black） M3（Color） WL_PCBO_0001_0009 1.1.WA10E00240 1.1.WA10E00250 1.7.WA10A00420 1.4.IC901090 1.6.LM203013 1.6.LS830021 1.6.LS840021 6 Qty. Product Code 1 1 1 2 4 4 1 6 D C B A 6.2.8 Right small light assembly 67 D C B A 1 1 7 2 2 1 2 2 5 4 3 1 4 1 6 4 3 3 4 Draw No. Name 5 SRF-0108A01 No. Light boxes fixed iron L SRF-0108A02 2 1 Light box L LED light box cover Lightbox PCB 5 7 6 5 4 3 SR1-0701D01 1 1 4 Material/Spec. SPCC-1.0T SPCC-1.2T M4*8 M3*8 M3 WL_PCBO_0001_0009 1.6.LM203013 1.4.IC901090 4 1 1 1.1.WA10E00260 1.1.WA10E00270 6 Qty. Product Code 1 1.7.WA10A00420 1.6.LS830021 4 1 1.6.LS840021 2 6 D C B A 6.2.9 Left small light assembly 68 D C B A 1 1 2 2 3 1 1 1 2 1 3 4 1 3 5 6 4 Draw No. SRF-0109A01 No. SRF-0109A02 2 1 SPCC-1.5T Name 5 Material/Spec. Fixed gear iron under SPCC-1.2T Fixed gear iron UP SPCC-1.5T SRF-0109A03 3 Fixed gear iron R M4*8 SPCC-1.5T Fixed gear iron L SRF-0109A04 4 5 5 4 1.1.WA10E00280 1.1.WA10E00290 1.1.WA10E00300 1.1.WA10E00310 6 Qty. Product Code 1 1 1 1 6 6 D C B A 6.2.10 Plastic step box assembly 69 D C B A 1 1 7 16 2 1 5 1 8 16 2 2 3 1 6 16 4 1 3 3 4 Draw No. IO board PCB 2 1 SRF-0110B01 Name PCB fixing plate Motion Board PCB 3 No. 5 5 Vibration speaker driver board L-holder Amp board 1 1 4 8 7 6 5 4 Material/Spec. GKP-IO-2013-0501 MDF-15.0T GKP-Vibrator-2013-0502 GKP-AMP6S-2013-0505 M3*12（CR） M3*8（Black） M3mm GKP-VSB--2013-0503 6 Code 1.2.WA10E00040 1.4.IC900022 1.4.IC901790 1.4.IC901810 1.4.IC901800 1.9.LX103010 1.6.LS830021 1.6.LS331022 Qty. Product 1 1 1 1 16 16 16 1 6 D C B A 6.2.11 PCB board assembl 70 D C B A 1 1 8 6 11 6 6 1 5 1 7 8 4 2 2 2 1 1 2 1 3 3 1 3 10 4 11 6 12 4 9 4 M4*20（Black） M6（Color） M6*14/M6*25 11 10 9 3 No. 4 Draw No. Name Seat frame Assy Upper ASSY Mainframe ASSY 5 SRF-0203000 4 2 SRF-0202000 1 SRF-0201000 SRF-0204000 5 Backest Rear-seat vents SRF-0200A01 6 Material/Spec. SPCC-1.2T M4*12（Black） ABS-3 The seat back cover 7 8 M4*8（Black） 5 12 4 6 Product Code 1.2.WA10E00050 1.1.WA10E00320 1.8.WA10A020 1.6.LS841021 1.6.LSY82050 1.6.LSW61020 1.6.LM206013 1.6.LS242011 1.6.LS240021 Qty. 1 1 1 2 1 1 8 6 4 4 12 4 6 D C B A 6.3 Seat assembly 71 D C B A 1 1 8 8 1 1 4 2 2 2 2 2 6 2 7 2 3 4 3 5 4 3 8 16 4 Draw No. No. Name 5 Material/Spec. SPCC-2.0T WAH-0000A04 SPCC-2.0T WAH-0000A05 3 SRF-0201B01 SPCC-2.0T WAH-0000A06 4 2 M16 M16*Y100 2.5 1 M6*35 8 Seat frame 5 7 6 5 4 1.2.WA10E00050 1.2.WA10E00050 1.2.WA10E00050 1.2.WA10E00050 1.2.WA10E00050 1.2.WA10E00050 1.2.WA10E00050 1.2.WA10E00050 6 Qty. Product Code 1 2 4 2 2 2 4 24 6 D C B A 6.3.1 Seat wooden crate assembly 72 D C B A 16 4 1 14 4 1 13 4 18 4 7 2 19 5 8 1 15 4 5 1 13 4 14 4 14 4 13 4 17 4 1 1 3 1 10 1 2 2 9 1 19 5 2 1 4 1 15 4 12 1 13 4 6 1 11 1 18 4 14 4 14 4 3 1 13 4 18 4 17 4 3 Seat speaker cover L Seat elbow 7 6 5 4 3 2 1 4 Draw No. Seat speaker cover R 9 8 No. Track L 10 Name Seat base cover The seat cushion seat back cushion Seat frame 5 Seat frame iron block after Seat frame iron block front Track R 11 Material/Spec. Blue ABS Blue ABS SPCC 30×2/Q235 SPCC-1.0 SPCC-1.0 SD2 SD2 4Ω/50W Low-frequency vibrators 12 M4*8（CR） M4*12（Black） M8*50（Black） M8*20（Black） M8（Color） M8（Black） φ8*φ22*2.0（Black） 5 19 18 17 16 15 14 13 SD3-07-01-01 1170 1160 1150-C SRF-0202C02 SRF-0202C01 SRF-0202A01 4 1.1.IG04A00650 6 Qty. Product Code 1.1.WA10E00330 1.8.WA10E030 1.8.WA10E040 1.1.IG040170 1.1.IG040180 1.1.IG040190 1.1.IG041000 2 1 1 1 1 1 1 1.1.IG041001 1.1.AA030100 1.1.AA030101 1.4.YSA00010 1.6.DP108031 1.6.DP208011 1.6.LM208013 1.6.LSM82011 1.6.LSM85011 1.6.LS841021 1.6.LS340012 1 1 1 1 1 10 12 8 4 8 20 20 6 D C B A 6.3.2 Upper assembly of seat 73 2 3 5 5 M4*12（Black） 8 1 1 6 1.6.LS841021 B A No. 4 Draw No. Name Material/Spec. Host fixed plate IPC-WL001-G860 Advantech HDF-12.0T Computer 6 Qty. Product Code 1.2.WA10E00060 1.4.ZJ010026 D 3 2 1 SRF-0203B01 4 D 1 3 C 1 1 2 1 3 8 2 C B A 1 6.3.3 Mainframe assembly 74 D C B A 1 1 5 10 2 2 4 1 3 1 3 3 2 1 1 1 No. 4 Draw No. 5 4 3 2 1 6100 4 Name 5 Backrest speaker fixed iron Seat horn cap Material/Spec. SD2 SD2 SPCC-1.5 Seat horn hood M4*16（Black） 3*5吋 8Ω/15W Speaker(Oval) 5 1.1.IG040700 1.8.IG040330 1.8.IG040320 1.4.YS300010 1.6.LS341041 6 Qty. Product Code 10 1 1 1 1 6 D C B A 6.3.4 Backrest horn assembly 75 D C B A 1 1 10 3 1 1 2 1 7 3 2 2 5 1 7 5 8 5 6 1 10 3 9 2 3 3 1 3 SRF-0300A01 SRF-0301000 2 1 4 Draw No. SRF-0300A03 3 No. SRF-0300C01 Name 5 Console keyboard ASSY Console speaker cover L Key fixed iron Material/Spec. 1 SPCC-1.2T 1.1.WA10E00340 1.1.WA10E00360 1.8.WA10E050 1.7.WA10E00070 1.1.WA10E00350 1.6.LS241021 1.6.LM204013 1.6.LSC41021 1.6.LM203013 6 Qty. Product Code 1 1 1 SPCC-1.5T Control panel plastic Black ABS 1 4 PMMA-5.0T SRF-0300D01 5 Meter Acrylic 8 1 M4*12（Black） SPCC-1.2T SRF-0300A02 5 6 M4（Color） 8 6 2 6 7 M3（Color） M4*12（BLack） Console speaker cover R 5 10 9 4 1 4 D C B A 6.4 Plastic console assembly 76 3 1 1 3 2 1 Button(Attached lights BLUE) 5 6 1.4.AJ130013# B A Draw No. No. 4 SRF-P0004E 2 1 Name Key board Acrylic 5 Button(Attached lights RED) 1.7.WA10F00060 1.4.AJ130012# 6 Qty. Product Code 1 1 WLP-001 PMMA-3.0T Material/Spec. 1 WLP-002 D 3 1 4 D 2 3 C 1 2 C B A 1 6.4.1 Console keyboard assembly 77 D C B A 1 1 2 1 1 1 2 2 3 1 3 3 5 6 4 1 No. 4 Draw No. Name 5 Material/Spec. SPCC-2.5T 37"LED Monitor SRF-0400A01 2 LCD bracket L SPCC-2.5T 1 3M SRF-0400A02 4 3 M6*12（Black） LCD bracket R 5 5 4 1.4.XS403740 1.1.WA10E00370 1.1.WA10E00380 1.9.JZ060010 1.6.LS861021 6 Qty. Product Code 1 1 1 1 6 6 D C B A 6.5 LCD assembly 78 D C 1 2 2 2 4 2 3 1 1 3 1 No. 4 Draw No. SRF-0500A01 SR1-0600C01 2 Name Led glass Pressed glass iron EVA 1 EVA 4 3 5 5 3*20mm 10 Material/Spec. 908*575.5*5 SPCC-1.2T 3*20mm 10 1.9.HM020030 6 Product Code 1.8.WA10A100 1.1.WA10E00390 1.9.HM020030 Qty. 1 2 1 2 6 D C B 4 B 3 A 2 A 1 6.6 LCD glass assembly 79 D C B A 12 2 2 1 1 1 1 5 1 7 1 9 1 3 1 11 2 2 2 13 1 4 1 8 1 10 1 1 1 3 3 6 1 13 1 Flash light Acrylic SRF-0600D01 SRF-0600A05 SRF-0600A04 SRF-0600A03 SRF-0600A02 SRF-0600A01 6 5 4 3 2 1 4 Draw No. Camera 7 No. Camera light PCB 8 SPCC-1.0T 雾白PMMA-3.0T Logitech C270 SPCC-1.0T Name Camera mounts 5 Material/Spec. SPCC-1.2T Camera adjustment iron SPCC-1.2T Camera cover plate Flash light fixed iron SPCC-1.2T Camera angle iron 3*20mm 10 EVA 9 Blue, 20mm M3*8（Black） 1.1.WA10E00400 1.1.WA10E00410 1.1.WA10E00420 1.1.WA10E00430 1.1.WA10E00650 1.7.WA10E00020 1.4.SX010020 1.4.IC901540 1.9.HM020030 6 Qty. Product Code 1 1 1 1 1 1 1 1 1 1.6.LS830021 1.6.LS840021 2 M4*8（Black） 11 10 1 1.6.LM204013 1.6.LM203013 2 M3（Color） M4（Color） 2 6 12 5 13 4 D C B A 6.7 Pick-up head assembly 80 D C 1 2 2 4 3 1 1 4 3 4 4 4 5 M4*12（CR） No. 4 Draw No. Name 5 Arylic support shaft Billboards Acrylic SRF-0700D01 1 Material/Spec. PMMA-5.0T 45 Billboards fixed block S45C 3 sd3-08-00-04 2 sr1-0700a02 1.6.LSF41022 1.7.WA10F00030 1.1.WA10A00350 1.1.IG04A00840 6 Qty. Product Code 1 4 4 4 6 D C B 4 B 3 A 2 A 1 6.8 Billboard Assembly 81 D C 1 4 4 2 1 2 3 1 3 1 1 5 M4*12(Black) 5050RGB60 80cm No. 4 Draw No. Name 5 Sides R Acrylic SRF-P0002 SRF-0800A01 2 1 Lamp fixed iron R Flexible Strip Light 4 3 PMMA-8.0T Material/Spec. SPCC-1.2T 1.6.LS841021 1.1.WA10E00440 1.7.WA10E00040 1.4.ZM900900 6 Qty. Product Code 1 1 4 1 6 D C B 4 B 3 A 2 A 1 6.9 Right side light assembly 82 D C 1 2 1 1 3 3 1 2 1 4 4 No. 4 Draw No. 4 3 2 SRF-P0003 1 SRF-0900A01 Name Lamp fixed iron L Sides L Acrylic 5 Flexible Strip Light 5 M4*12(Black) 5050RGB60 80cm PMMA-8.0T SPCC-1.2T 6 Material/Spec. 1.1.WA10E00450 6 Qty. Product Code 1 1.7.WA10E00050 1.4.ZM900900 1 1.6.LS841021 4 1 D C B 4 B 3 A 2 A 1 6.10 Left side light assembly 83 D C B A 19 1 3 1 18 1 1 11 2 1 14 1 21 4 22 2 16 2 1 1 4 1 23 2 10 1 2 2 9 4 5 1 20 8 19 4 6 1 2 1 7 3 13 1 15 6 17 1 8 1 3 15 2 12 1 19 1 3 18 1 19 1 Φ4*Φ10*1.0（Black) GB/T 894.1-1986 10 M6 17 16 15 4 Draw No. SRF-1002000 SRF-1001000 2 1 No. SRF-1003000 3 SRF-1000A01 7 SRF-1004000 SRF-1000A02 8 4 SRF-1000A03 9 SRF-1006000 SRF-1000A04 10 SRF-1005000 SRF-1000C01 11 6 SRF-1000C02 12 5 SRF-1000C03 13 Name Handle ASSY 5 LEFT side plate ASSY RIGHT side plate ASSY Rive shaft ASSY Electromagnet ASSY Suction block ASSY Spring shaft A Intermediate shaft Positioning axes Leaf spring cover Limit Stop Collar master gear duplex gear 45 45 45 Material/Spec. SPCC-2.0T white POM white POM white POM Φ4*Φ16*1.0（Black） 18 Cam M5*12（Black） M5（Color） M4*8（Black） 21 20 19 14 M5*16（Black） E-type buckle M6（Black） 22 5 23 SRF-1000C04 4 1.1.WA10E00460 1.1.WA10E00470 1.1.WA10E00480 1.1.WA10E00490 1.8.WA10E060 1.8.WA10E070 1.8.WA10E080 1.8.WA10E090 1.6.DQ106011 1.6.DQ336060 1.6.DP104011 1.6.DP104041 1.6.LS840021 1.6.LM205013 1.6.LS851021 1.6.LSF51031 1.6.DP206011 6 Qty. Product Code 1 1 1 1 1 1 3 1 4 1 2 1 1 1 8 2 1 2 4 8 7 2 2 6 D C B A 6.11 Push rod assembly 84 D C B A 1 1 10 4 9 4 2 1 4 1 3 1 5 1 2 2 6 1 7 1 8 2 3 3 1 1 9 8 7 6 5 4 3 2 1 10 No. 8 2 4 Draw No. SRF-1001C06 SRF-1001C05 SRF-1001C04 SRF-1001C03 SRF-1001C02 SRF-1001C01 SRF-1001A01 4 M4*12(CR) Name Mounting plate 5 handle with plastic around Material/Spec. SPCC-2.0T M4(CR) M3*8(Black) Black ABS The push rod shell decoration cover board Black ABS Blue PC handle lamp cap handle decoration Blue ABS+PC handle side cap Black ABS 5 6 Code 1.1.WA10E00500 1.8.WA10E100 1.8.WA10E110 1.8.WA10E120 1.8.WA10E130 1.8.WA10E140 1.8.WA10E150 1.6.LS830021 1.6.LM104012 1.6.LSF41022 Qty. Product 4 4 1 1 1 1 1 1 1 4 6 D C B A 6.11.1 Handle assembly 85 D C B A 1 1 7 2 5 1 3 1 2 1 2 2 8 1 6 1 3 3 1 1 No. 4 Draw No. 8 7 6 5 4 3 2 SRF-1002C01 1 SRF-1002A01 4 4 1 Potentiometer gear 5 white POM SPCC-2.0T Resistance round Name Side plate L Material/Spec. LF-38A(500-600） Potentiometer Bearing M3*6(Black) M3*8(Black) F618-8 F61900 B-5KΩ 270 Bearing 5 1.1.WA10E00510 1.8.WA10E160 1.4.ZL010010 1.4.VR150220# 1.4.ZC619000 1.4.ZC619001 1.6.LS830021 1.6.LST300211 6 Qty. Product Code 1 2 1 1 1 1 1 1 6 D C B A 6.11.2 Left side plate assembly 86 D C B A 1 1 3 1 2 5 2 4 1 2 1 2 1 3 3 1 1 No. 4 Draw No. Name Side plate R Micro Switch Bearing 5 Material/Spec. M3*16 F61900 F618-8 3P KW3A SPCC-2.0T 4 3 2 1 SRF-1003A01 Bearing 5 5 4 1.1.WA10E00520 1.4.SW303010 1.4.ZC619001 1.4.ZC619000 6 Qty. Product Code 1 1 1 1 2 6 D C B A 6.11.3 Right side plate assembly 87 D C B A 1 1 2 2 2 1 4 2 5 2 3 1 1 3 3 1 4 Draw No. Name 5 Rotation webs plate No. Spring shaft B 2 SRF-1004A03 1 SRF-1004A01 Tension springs 5 SRF-1004A04 3 5 4 4 45 Material/Spec. M6(Black) GB/T 894.1-1986 10 1.1.WA10E00530 1.1.WA10E00540 1.1.WA10E00550 1.6.DQ336060 1.6.DQ106011 6 Qty. Product Code 1 1 1 2 2 6 D C B A 6.11.4 Drive shaft assembly 88 D C B A 1 1 2 2 2 1 3 3 1 1 No. 4 Draw No. Name 5 Material/Spec. H2520 DC12V/2.8W SPCC-2.0T Electromagnet fixed plate 2 1 SRF-1005A01 Electromagnet M5*12(Black) 3 1 5 3 4 1.4.CT010030 1 1 6 Qty. Product Code 1.1.WA10E00560 1.6.LS851021 1 6 D C B A 6.11.5 Electromagnet assembly 89 2 3 3 2 SRF-1006A02 1 SRF-1006A01 Connection block 5 5 M3(Color) SPCC-3.0T SUS304-1.2T 2 1 1 6 1.6.LM203013 B A No. 4 Draw No. Name Leaf spring Material/Spec. 6 Qty. Product Code 1.1.WA10E00570 1.1.WA10E00580 D 1 1 3 2 4 D 1 3 C 2 1 2 C B A 1 6.11.6 Suction block assembly 90 D C B A 1 1 4 1 5 1 2 2 2 2 3 1 3 1 1 3 6 1 SRF-1100A01 4 Draw No. Locking plate SRF-1100A02 2 1 No. Coin door body 3 5 Name 5 Coin door fixed iron Lock LOCK Electronic coin 6 5 4 4 Material/Spec. SPCC-1.5T SPCC-2.0T TW-800Ⅲ M7-K 5555 1.1.WA10E00590 1.1.WA10E00600 2.1.AA030010 1.4.SJ120120 1.4.SJ220050 1.4.TB100050 6 Qty. Product Code 1 2 1 1 1 1 6 D C B A 6.12 Coin door assembly 91 D C B A 6 2 1 1 3 1 2 1 2 2 4 1 6 2 5 1 3 1 1 3 SRF-1200B01 4 Draw No. SRF-1200A01 2 1 No. SRF-1200A02 3 Name Steppin plate Pattern aluminum 5 Material/Spec. HDF-18.0T AL Aluminum fixed iron A SPCC-1.2T Aluminum fixed iron B SPCC-1.2T SRF-1200A03 4 M4*20（Black） 3*20mm EVA 5 6 5 4 6 Code 1.2.WA10E00070 1.1.WA10E00610 1.1.WA10E00620 1.1.WA10E00630 1.9.HM020030 1.6.LS242011 Qty. Product 1 1 1 1 4 1 6 D C B A 6.13 Stepping cover assembly 92 2 3 3 6 5 6 6 1.6.LS240021 B A 4 Draw No. Name 5 Material/Spec. Pedal cover fixed iron SPCC-1.2T No. SUS304-1.5 Pedal cover 2 sr1-0400a02 1 SRF-1300A01 M4*8(Black) 3 1.1.WA10E00640 1.1.WA10A00200 6 Qty. Product Code 1 1 D 2 1 4 D 1 1 3 C 1 2 C B A 1 6.14 Pedal assembly 93 2 3 SRF-1400B01 1 1 5 5 M4*12(Black) T8 18W/AC220V 6 3 6 1.6.LS341021 B A 4 Draw No. Name Back door U 1 No. Fluorescent lamp 3 2 Material/Spec. HDF-15.0T 6 Product Code 1.2.WA10E00080 Qty. 1 1.4.ZM101810 D 3 6 4 D 2 3 3 C 1 2 C B A 1 6.15 Upper assembly of back door plate 94 D C B A 1 1 1 4 4 3 1 2 6 8 2 7 8 5 2 1 2 1 3 3 1 1 8 1 4 Draw No. Back door M No. Key Name Locking plate Fan cover Fan 1 SRF-1500B01 5 5 Plastic buckle hand 7 6 5 4 3 2 8 4 Material/Spec. HDF-15.0T （001号） 5555锁-K M4*70(CR) 120*120/AC220V 120*120 M4 1.2.WA10E00090 1.4.SJ120130 1.4.SJ500060 1.4.FS300020 1.4.FS200042 1.6.LS747012 1.6.LM204013 1.8.AA000040 6 Qty. Product Code 1 8 8 2 4 1 1 1 6 D C B A 6.16 Intermediate assembly of back door plate 95 D C B A 1 1 2 2 2 1 4 3 3 3 1 1 3 1 5 4 No. 4 Draw No. 5 4 3 SR1-1300C02 2 SR1-1300C01 1 SR1-1300A01 4 Name Steering wheel 5 Material/Spec. M4*12(CR) M4*12(Black) The steering wheel cover(bottom)ABS -2.5 The steering wheel cover(top) ABS -2.5 5 6 Code 1.1.WA10A00490 1.8.WA10A070 1.8.WA10A080 1.6.LS841021 1.6.LSF41022 Qty. Product 4 3 1 1 1 6 D C B A 6.17 Steeling wheel assembly 96 SRF-P0013 1.7.WA10E00150 SRF-P0012M 1.7.WA10G00140 SRF-P0012E 1.7.WA10F00140 SRF-P0007 1.7.WA10E00090 SRF-P0030 1.7.WA10E00320 SRF-P0029 1.7.WA10E00310 SRFE-P0004E 1.7.WA10F00060 SRF-P0001M 1.7.WA10G00030 SRF-P0028 1.7.WA10E00300 SRF-P0001E 1.7.WA10F00030 SRF-P0032 1.7.WA10E00340 SRF-P0024 1.7.WA10E00260 SRF-P0006 1.7.WA10E00080 SRF-P0037E 1.7.WA10F00390 SRF-P0005 1.7.WA10E00070 SRF-P0036E 1.7.WA10F00380 SRF-P0023 1.7.WA10E00250 SRF-P0022 1.7.WA10E00240 7. Printing Pattern 1/3 97 SRF-P0019 1.7.WA10E00210 SRF-P0021 1.7.WA10E00230 SRF-P0035 1.7.WA10E00370 SRF-P0026 1.7.WA10E00280 SRF-P0010 1.7.WA10E00120 SRF-P0011 1.7.WA10E00130 SRF-P0017 1.7.WA10E00190 SRF-P0015 1.7.WA10E00170 SRF-P0031 1.7.WA10E00330 SRF-P0003 1.7.WA10E00050 2/3 98 SRF-P0014 1.7.WA10E00160 SRF-P0034 1.7.WA10E00360 SRF-P0016 1.7.WA10E00180 SRF-P0027 1.7.WA10E00290 SRF-P0002 1.7.WA10E00040 SRF-P0033 1.7.WA10E00350 SRF-P0009 1.7.WA10E00110 SRF-P0008 1.7.WA10E00100 SRF-P0038 1.7.WA10E00400 SRF-P0025 1.7.WA10E00270 SRF-P0020 1.7.WA10E00220 SRF-P0018 1.7.WA10E00200 3/3 8. Wiring Diagram 99 2 1 T8 18W 3 4 5 SM4P OG 4 RD 2 GN 1 BU 3 RGB K13 VL3P WT 1 1 2 2 GN/YL GY GY Fluorescent lamp Fluorescent lamp K9 VL3P WT 1 GN/YL 2 GY K4 INRET BN L BU N GN/YL G WT 1 2 GN/YL 3 3 GY + R G B DVI :% DVI USB PC VIDEO K8 3P INRET L AC110V EARTH G N N AC110VRET 2/2 E8 VLR-04V C R 56 Double Audio Frequency 3 3.5 Double Audio Frequency 3 3.5 Seat + 3*5" 84 /15W Speaker 2 2 FG 3 4 AC16V AC220V 0V AC110V 3*5" 84 /15W Speaker K17 VL2P WT 1 1 WT GY GY L GND R 2/2 B8 (F) BK 2/2 B8 (C) L GND WT RD R BK 2/2 B8 (R) YL2P K71 BK 1 GN 2 2 K73 BK 1 GN 2 BK 3 BU BK 1 GN 4 YLR-04V K75 BK 1 GN 2 YLP-02V 2/2 B8 2/2 C8 YL2P K72 BK 1 BU 2 2 BK 1 BU + 44 /50W Low-Frequency Oscillator 2 2 0V AC16V VLP-04V BK WT RD + 2/2 A8 WT RD R BK 1 GN Transformer 250W K21 BU 1 BK 2 BU L GND YL2P K76 BK 1 2 2 GN - 0V 0V 2/2 C8 K59 K16 VL2P WT 1 1 WT GY GY AC110V 4 Double Audio Frequency 3 3.5 K8 AC110V 0V FG K23 1 OG 2 BK BK 3 OG 4 5 BK BK GN/YL 2 3 BU 1 BN 2/2 C8 6 2/2 E8 OG BL OG BL 4 S-150-12 +12V COM +12V COM Power Pack YLP-04V 2/2 B8 L EARTH N K2 Fan for Transformer 120*120/AC110V 3 3 K30 RD 1 PL 2 BK 3 4 2/2 C8 YLP-04V 3 3 K7 VL3P WT WT 1 1 GN/YL GN/YL 2 2 GY GY WT GN/YL GY 3 2 1 Accelerator VR11 5K2 K12 VL3P WT WT 1 1 GN/YL GN/YL 2 2 GY GY BN 2 GN/YL 3 BU 1 VL3P YLP-06V K22 OG 1 OG 2 OG 3 OG USB KEY K61 PC Power Line Transformer 350W 14V F WT 3 3 GY 2 GN/YL 1 BN 2 GN/YL 3 BU 1 VL3P Camera K18 BU 1 BK 2 WT 3 GY 2/2 D8 K57 WT L GN/YL G GY GY 2 GN/YL 1 WT GN/YL 2 3 BU 1 BN K3 USB K46 OG 4 RD 2 GN 1 BU 3 K52 USB-A 18; K51 K42 OG 1 RD 2 GN 3 BU 4 YLP-04V USB USB VL3P K47 4 OG 2 RD 1 GN 3 BU DVI K50 USB-A Fan for monitor 2 120*120/AC110V 8 VIDEO DVI SM4P OG 4 RD 2 GN 1 BU 3 RGB LED R 3P L AC220VRET N AC220V EARTH G 7879% Fan for monitor 1 120*120/AC110V + R G B LED L Monitor 37"LED 3 3 T8 18W 7 Fluorescent lamp WT T8 18W 6 3 2 1 Brake VR21 5K2 K31 ED 1 BU 2 BK 2/2 D8 3 YLP-03V Brake & Accelerator 12V 150W K26 GN/YL 1 VLP-01V 1100W Transformer WT GN/YL GY WT GN/YL GY AC110V AC220V 0V AC< FG AC220V NOISE YL L L L PL N N N GN/YL G G G FIL LINE LOAD Power Line SW1 BN BU AC110V FUSE 6A K1 VL3P BN BN 1 1 BU BU 3 3 GN/YL GN/YL 2 2 0V T1 VL3P BN BN 1 1 BU BU 3 3 GN/YL GN/YL K6 VL6P WT 1 1 GN/YL 2 2 GY 3 3 WT 4 4 5 5 GN/YL GY 6 6 0V FG 2 2 Internet Connector 1 2 3 4 5 100 6 7 8 2 1 WT RD WT RD BK K64 XHP-6 BK 6 Volume VR-B10K3 K55 SM7P BK K60 WT 1 RD 2 BK 3 WT 4 5 RD 6 BK 7 8 WT 1 RD 2 BK 3 WT 5 RD 4 BK 6 WT RD WT RD WT RD WT RD BK R R R BK WT RD VR-B10K3 L GND Double Audio Frequency 4 3.5 8 L GND Double Audio Frequency 4 3.5 L GND Double Audio Frequency 4 3.5 F VH4P K66 BK M- 1 2 M+ 3 4 C R Amplifier Board BK FL FL + 2 1 2 K67 VH10P 1 K56 SM8P K65 XHP-6 Volume BK K62 WT 1 1 RD 2 2 BK 3 3 4 4 WT 5 5 RD 6 6 BK 7 7 WT 1 RD 2 BK 3 WT 5 RD 4 7 K58 WT WT 1 1 RD RD 2 2 BK BK 3 3 WT WT 4 4 RD RD 5 5 BK BK 6 6 VR-B10K3 6 WT 1 RD 2 BK 3 4 WT 5 RD 6 BK 7 8 FR 3 3 FR + 4 4 BK BN BK RD C 5 5 C + 6 6 RL 7 7 RL + 8 8 RR 9 9 INRET AC16V 0V AC16V BK 1 2 BN 3 4 BN + Volume BK 5 - 4 K54 SM6P K63 XHP-6 1 2 3 5 4 6 3 Bass BU BK BU K20 VL3P BU BU 1 1 BK BK 2 2 BU BU RR + 10 10 K21 BU 1 BK 2 BU 3 3 1/2 D1 3 4 VLR-04V BK GN BK BU K70 YL4P 1 BK GN 2 BK 3 BU 4 4 K73 BK 1 GN 2 BK 3 BU BK 1 GN 2 BK 3 BU 1/2 C8 4 YLP-04V K26 GN/YL 1 VLR-01VF K27 YL2P GN 1 1 GN GY GY 1/2 E1 2 2 Stopwatch (Coin) DOWN UP TEST SERVICE Service Pannel K24 BK 1 BK 2 GN 3 BU 4 PL 5 WT YL6P BK 1 BK 2 GN 3 BU 4 PL 5 WT K23 BK 3 OG 1 BK 2 BK 6 OG 4 BK 6 6 1/2 B8 (F) 1/2 B8 (C) 1/2 C8 (R) 1/2 D1 5 YLR-06V K33 BK 1 BK 2 BN 3 RD START KEY VIEW KEY 9 8 BN 7 RD 6 BU 5 4 3 2 1 K68 YL2P BK 1 BN 2 2 BK 1 BN + 9 8 7 6 5 4 3 2 1 5 6 7 8 5 6 7 8 5557-20R BK 1 RD BN GN 15 16 17 18 19 20 15 16 17 18 19 20 WT BU PL WT LT GN GN 1 2 3 4 5 6 7 8 9 2 2 PWM RD GN BU PK K30 RD 1 PL 2 BK VHR-2N K74 BK GND 1 1 GN K43 XHP-2 BKWT 1 1 GND BN SIGNAL 2 2 Vibrator HornINRET Driver Board AC16V 0V AC16V 3 4 K31 RD 1 BU 2 BK 1/2 E8 3 BN YLR-03V K42 OG 1 RD 2 GN 3 BU 16 16 4 5 6 7 8 9 10 11 12 13 14 15 4 5 6 7 8 9 10 11 12 13 14 15 1 2 3 1 2 3 1/2 A8 4 YLR-04V BK WT RD BK BU RD BK PL RD BK GN RD J5 1/2 D8 YLR-04V BU BK BU XHP-15 Light board for control panels M- M+ Motor YLR-04V K41 XHP-4 PK 1 1 PWM WTGN 2 2 LEFT WTBN 3 3 RIGHT OG XH2P K39 OG +12V 1 1 2 2 WT 4 4 +12V PWM 1 2 3 K32 BK 3 WT 2 RD 1 YL3P BK 3 2 WT 1 RD 1 2 3 K29 BK 3 GN 2 RD 1 YL3P BK 3 2 GN 1 RD 1/2 E1 4 K48 VHR-2N RD 1 BK 1 + 2 2 - K37 YL2P OG 1 1 OG BU 2 2 BU Electromagnet H25201 DC12V5 12W2 Steering wheel VR1 5K2 K22 OG 1 OG 2 OG 3 OG K36 YL2P OG OG 1 1 GN 2 2 GN Control Panels Boost Controller VR1 5K2 B-5K3 2706 BK 1 RD K38 YL2P OG 1 1 OG PL 2 2 PL VIEW LED1 RD2 1 WT BN GND 1 2 3 R 4 G 5 B 6 PWM 7 8 PWM 9 BKWT 1/2 C8 2 2 + START LED1 BU2 5557-16R J8 K69 YL2P 4" 43 /25W Speaker USB-B START KEY VIEW KEY Boost cont -roller HIGH 1 1 K75 BK 1 GN 2 YLR-02V K53 IO Board J10 1/2 B8 OG 12V 1 1 BK GND 2 2 BK GND 3 3 4 4 COIN DOWN UP TEST SERVICE +12V J2 XHP-9 YL4P BK 1 BK 2 3 BN RD 4 4 4" 43 /25W Speaker 5 6 7 8 9 10 1 2 3 4 3.3V HIGH 5 6 7 8 9 10 1 2 3 4 3.3V GND Steering wheel VR 6 6 K34 YL2P BK 1 1 BK BU 2 2 BU J1 XHP-10 GND Boost Controller VR 3.3V GND Brake VR 3.3V GND Accelerator VR GN/YL 1 1 GN/YL BN 2 2 BN GN 3 3 GN GY 4 4 GY OG 5 5 OG BK BK Camera LED VIEW LED Boost Controller BN GN BU PL WT OG K25 YL6P K28 1 2 BN GN 3 4 GY OG 5 BK 6 Dynamic panels1 L2 Electromagnet START LED LED for control Panel LED FG XHP-6 1 2 Coin Selector 43 5 TW-800III 6 Dynamic panels1 R2 VHR-4N J11 FG DRIVE BOARD VHR-4N K19 AC14V 0V AC110V 0V 4 3 2 1 K18 BU 1 BK 2 WT 3 GY BU 4 BK 3 2 WT 1 GY FUSE 5A 1 1/2 C1 4 VLP-04V K49 VL2P RD 1 1 RD BK BK Piezoresistor 391KD10 2 2 Camera LED 1 2 3 K40 XH2P OG 1 1 LTGN XH2P K35 OG 1 2 BN +12V 1 PWM 2 2 2 K45 XH2P OG 1 1 GN K44 XH2P OG 1 1 GN 2 2 2 2 1 1 2 2 LED 4 5 101 6 7 8 9. After-sales Service Honorable customer ！ Thank you for purchasing our product ！ For your benefits, if you find any fault during the operation of the product, please use a technician who obtains a certificate related to mechanical engineering, electrical engineering or who engages in routine maintenance, repair and management of amusement machine to check the machine and inform us the fault in a timely manner. Our company will take corresponding measures to assist you to solve the problem promptly. NOTICE NOTICE：Do not dismount or replace any part of the machine without our technician’s permission, or you will solely undertake the consequence ！ Please pay attention to our contact information as follow: GuangZhou Wahlap Technology Limited 102 Ver.3.00 The specifications and operation instructions in this Manual are subject to change without notice for reasons such as performance.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Author : panying Create Date : 2014:05:22 15:20:17+08:00 Modify Date : 2015:01:10 09:36:40+08:00 Title : XMP Toolkit : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26 Metadata Date : 2015:01:10 09:36:40+08:00 Creator Tool : PScript5.dll Version 5.2.2 Format : application/pdf Creator : panying Document ID : uuid:9fc6793b-9214-40ba-a5af-1e6f11eba5e2 Instance ID : uuid:f0f68399-d1c9-4dd9-af3c-3142f312b526 Producer : Adobe Acrobat Pro 10.1.9 Page Count : 108EXIF Metadata provided by EXIF.tools