Arcade Wave Runner Gp Std Manual Cover User
2013-11-28
User Manual: Arcade Wave Runner Gp Std Manual
Open the PDF directly: View PDF 
.
Page Count: 79
| Download | |
| Open PDF In Browser | View PDF |
www.seuservice.com
1ST PRINTING JUNE ‘03
STD Version
Owner’s Manual
SEGA ENTERPRISES, INC. USA
MANUAL NO. 999-1869
Game Code: WRG
VISIT OUR WEBSITE!
BEFORE USING THE PRODUCT, BE SURE TO READ THE FOLLOWING:
To maintain the safety:
To ensure the safe usage of the product, be sure to read the following before using the product. The
following instructions are intended for the users, operators and the personnel in charge of the operation of the product. After carefully reading and sufficiently understanding the warning displays and
cautions, handle the product appropriately. Be sure to keep this manual nearby the product or elsewhere convenient for referring to it when necessary.
Herein, explanations which require special attention are enclosed with dual lines. Depending on the
potentially hazardous degrees, the terms of WARNING, CAUTION, etc. are used. Be sure to understand the contents of the displays before reading the text.
WARNING!
Indicates that mishandling the product by disregarding this warning
will cause a potentially hazardous
situation which can result in death
or serious injury.
CAUTION!
Indicates that mishandling the product
by disregarding this caution will cause
a slight hazardous situation which can
result in personal injury and or material
damage.
For the safe usage of the product, the following pictographs are used:
Indicates “HANDLE WITH CARE.” In order to protect the human body an equipment,
this display is attached to places where the Owner’s Manual and or Service Manual should
be referred to.
Perform work in accordance with the instructions herein stated.
Instructions for work are explained by paying attention to the aspect of accident prevention. Failing to
perform work as per the instructions can cause accidents. In the case where only those who have technical expertise should perform the work to avoid hazardous situation, the instructions herein state that the
serviceman should perform such work.
Be sure to turn off power before working on the machine.
To prevent electric shock, be sure to turn off power before starting the work in which the worker touches
the interior of the product. If the work is to be performed in the power-on status, the Instruction Manual
herein always states to that effect.
Be sure to ground the Earth Terminal (this, however, is not required in the case where a power cord
with earth is used).
This product is equipped with the Earth Terminal. When installing the product, Connect the Earth Terminal to the “accurately grounded indoor earth terminal” by using an earth wire. Unless the product is
grounded appropriately, the user can be subject to electric shock. After performing repair, etc. for the
Control equipment, ensure that the Earth Wire is firmly connected to the Control equipment.
Ensure that the Power Supply used is equipped with an Earth Leakage Breaker.
This product does not incorporate the Earth Leakage Breaker. Using a power supply which is not
equipped with the Earth Leakage Breaker can cause a fire when earth leakage occurs.
Be sure to use fuses which meet the specified rating. (only for the machines which use fuses).
Using fuses exceeding the specified rating can cause a fire and electric shock.
Specification changes (removal of equipment, conversion and addition) not designated by SEGA
are not allowed.
The parts of the product include warning labels for safety, covers for personal protection, etc. It is
very hazardous to operate the product by removing parts and or modifying the circuits. Should doors,
lids and protective parts be damaged or lost, refrain from operating the product, and contact where the
product was purchased from or the office herein stated. SEGA shall not be held responsible for any
accidents, compensation for damage to a third party, resulting from the specifications not designated by
SEGA.
Ensure that the product meets the requirements of appropriate Electrical Specifications.
Before installing the product, check for Electrical Specifications. SEGA products have a nameplate
on which Electrical Specifications are described. Ensure that the product is compatible with the power
supply voltage and frequency requirements of the location. Using any Electrical Specifications different
from the designated Specifications can cause a fire and electric shock.
Install and operate the product in places where appropriate lighting is available, allowing warning
labels to be clearly read.
To ensure safety for the customers, labels and printed instructions describing potentially hazardous situation are applied to places where accidents can be caused. Ensure that where the product is operated
has sufficient lighting allowing the warnings to be read. If any label is peeled off, apply it again immediately. Please place an order with where the product was purchased from or the office herein stated.
When handling the Monitor, be very careful. (Applies only to the product w/monitor.)
Some of the monitor (TV) parts are subject to high tension voltage. Even after running off power, some
portions are still subject to high tension voltage sometimes. Monitor repair and replacement should be
performed only be those technical personnel who have knowledge of electricity and technical expertise.
Be sure to adjust the monitor (projector) properly. (Applies only to the product w/monitor.)
Do not operate the product leaving on-screen flickering or blurring as it is. Using the product with the
monitor not properly adjusted may cause dizziness or a headache to an operator, a player, or the customers.
When transporting or reselling this product, be sure to attach this manual to the product.
In the case where commercially available monitors and printers are used in this product, only the contents relating to this product are explained herein. Some commercially available equipment has functions and reactions not stated in this manual. Read this manual together with the specific Instruction
Manual of such equipment.
• Descriptions herein contained may be subject to improvement changes without notice.
• The contents described herein are fully prepared with due care. However, should any question arise or
errors be found, please contact SEGA.
INSPECTIONS IMMEDIATELY AFTER TRANSPORTING THE PRODUCT TO THE LOCATION.
Normally, at the time of shipment, SEGA products are in a status allowing for usage immediately after
transporting to the location. Nevertheless, an irregular situation may occur during transportation. Before
turning on power, check the following points to ensure that the product has been transported in a satisfactory status.
Are there any dented portions or defects (cuts, etc.) on the external surfaces of the cabinet?
Are Casters and Adjusters, damaged?
Do the power supply voltage and frequency requirements meet with those of the location?
Are all wiring connectors correctly and securely connected? Unless connected in the correct direction,
connector connections can not be made accurately. Do not insert connectors forcibly.
Do power cords have cuts and dents?
Do the fuses used meet specified rating? Is the Circuit Protector in an energized status?
Are all accessories available?
Can all Doors and Lids be opened with the Accessory keys? Can Doors and Lids be firmly closed?
TABLE OF CONTENTS
BEFORE USING THE PRODUCT, BE SURE TO READ THE FOLLOWING:
TABLE OF CONTENTS
INTRODUCTION OF THE OWNER’S MANUAL
1. HANDLING PRECAUTIONS ..........................................................................................
2. PRECAUTIONS CONCERNING INSTALLATION LOCATION ...................................
3. OPERATION .....................................................................................................................
4. NAME OF PARTS .............................................................................................................
5. ACCESSORIES .................................................................................................................
6. ASSEMBLING AND INSTALLATION ............................................................................
7. PRECAUTIONS TO BE HEEDED WHEN MOVING THE MACHINE ........................
8. CONTENTS OF GAME ....................................................................................................
9. EXPLANATION OF TEST AND DATA DISPLAY .........................................................
10. COIN SELECTOR ............................................................................................................
11. MONITOR ........................................................................................................................
12. PERIODIC INSPECTION TABLE ..................................................................................
13. TROUBLESHOOTING ....................................................................................................
14. GAME BOARD ................................................................................................................
15. DESIGN RELATED PARTS ...........................................................................................
16. COMMUNICATION PLAY .............................................................................................
17. PARTS ...............................................................................................................................
17. WIRE COLOR CODE TABLE ........................................................................................
18. WIRING DIAGRAM .......................................................................................................
1 - 2
3 - 4
5 - 7
8
9 - 10
11 - 18
19 - 20
21 - 25
26 - 43
44 - 45
46 - 47
48
49 - 52
53 - 54
55
56 - 60
61 - 64
65
XXX
Installation Space
Height
Width
Length
Weight
Power, maximum current
MONITOR
SPECIFICATIONS
:
:
:
:
:
:
38.25 inches wide X 84.5 inches deep
77.5 inches
30.25 inches
76.5 inches
550 lbs
420 W 3.5 A (AC 120V 60 Hz AREA)
: 29 inch supplied by Wells Gardner
model #wgm-2972XX
INTRODUCTION OF THE OWNERS MANUAL
This Owner's Manual is intended to provide detailed descriptions together with all the
necessary information covering the general operation of electronic assemblies, electromechanicals, servicing control, spare parts, etc. as regards the product,
WAVERUNNER GP STANDARD VERSION.
This manual is intended for the owners, personnel and managers in charge of operation
of the product. Operate the product after carefully reading and sufficiently understanding the instructions. If the product fails to function satisfactorily, non-technical personnel
should under no circumstances touch the internal system. Please contact where the product was purchased from.
Use of this product is unlikely to cause physical injuries or damages to property. However,
where special attention is required this is indicated by a thick line, the word "IMPORTANT"
and its sign in this manual.
STOP
Indicates that mishandling the product by disregarding this display can cause the
product's intrinsic performance not to be obtained, resulting in malfunctioning.
IMPORTANT!
SEGA AMUSEMENTS USA, INC./CUSTOMER SERVICE
45133 Industrial Drive, Fremont, California 94538, U.S.A.
Phone : (415) 701-6580
Fax : (415) 701-6594
DEFINITION OF LOCATION MAINTENANCE MAN AND SERVICEMAN
WARNING!
Non-technical personnel who do not have technical knowledge and expertise should
refrain from performing such work that this manual requires the location's maintenance man or a serviceman to carry out, or work which is not explained in this
manual. Failing to comply with this instruction can cause a severe accident such
as electric shock.
Ensure that parts replacement, servicing & inspections, and troubleshooting are performed by the
location's maintenance man or the serviceman. It is instructed herein that particularly hazardous work
should be performed by the serviceman who has technical expertise and knowledge.
The location's maintenance man and serviceman are herein defined as follows:
"Location's Maintenance Man" :
Those who have experience in the maintenance of amusement equipment and vending machines, etc.,
and also participate in the servicing and control of the equipment through such routine work as equipment assembly and installation, servicing and inspections, replacement of units and consumables, etc.
within the Amusement Facilities and or locations under the management of the Owner and Owner's
Operators of the product.
Activities of Location's Maintenance Man :
Assembly & installation, servicing & inspections, and replacement of units & consumables as regards
amusement equipment, vending machines, etc.
Serviceman :
Those who participate in the designing, manufacturing, inspections and maintenance service of the
equipment at an amusement equipment manufacturer.
Those who have technical expertise equivalent to that of technical high school graduates as regards
electricity, electronics and or mechanical engineering, and daily take part in the servicing & control
and repair of amusement equipment.
Serviceman's Activities :
Assembly & installation and repair & adjustments of electrical, electronic and mechanical parts of
amusement equipment and vending machines.
LISTED
UL
®
5K92
AMUSEMENT MACHINE
NOTES:
1. HANDLING PRECAUTIONS
When installing or inspecting the machine, be very careful of the following points and pay attention to
ensure that the player can enjoy the game safely.
Non-compliance with the following points or inappropriate handling running counter to the cautionary
matters herein stated can cause personal injury or damage to the machine.
WARNING!
• Before performing work, be sure to turn power off. Performing the work without turning power off can cause an electric shock or short circuit. In the case
work should be performed in the status of power on, this manual always states
to that effect.
• To avoid electric shock or short circuit, do not plug in or unplug quickly.
• To avoid electric shock, do not plug in or unplug with a wet hand.
• Do not expose Power Cords and Earth Wires on the surface, (floor, passage,
etc.). If exposed, the Power Cords and Earth Wires are susceptible to damage.
• Damaged cords and wires can cause electric shock or short circuit.
To avoid causing a fire or electric shock, do not put things on or damage Power
Cords.
• When or after installing the product, do not unnecessarily pull the power cord.
If damaged, the power cord can cause a fire or electric shock.
In case the power cord is damaged, ask for replacement through where the product was purchased from or the office herein stated. Using the cord as is damaged can cause fire, electric shock or leakage.
• Be sure to perform grounding appropriately. Inappropriate grounding can cause
an electric shock.
• Be sure to use fuses meeting specified rating. Using fuses exceeding the specified rating can cause a fire or electric shock.
• Completely make connector connections for IC BD and others. Insufficient
insertion can cause an electric shock.
• Specification changes, removal of equipment, conversion and/or addition, not
designated by SEGA are not permitted.
• Failure to observe this may cause a fire or an electric shock. Non-compliance
with this instruction can have a bad influence upon physical conditions of the
players or the lookers-on, or result in injury during play.
• SEGA shall not be held responsible for damage, compensation for damage to a
third party, caused by specification changes not designated by SEGA.
Be sure to perform periodic maintenance inspections herein stated.
1
www.seuservice.com
STOP
IMPORTANT!
For the IC board circuit inspections, only the logic tester is allowed. The use of a
multiple-purpose tester is not permitted, so be careful in this regard.
The Projector is employed for this machine. The Projector's screen is susceptible
to damage, therefore, be very careful when cleaning the screen. For details, refer to
PROJECTOR.
Some parts are the ones designed and manufactured not specifically for this game
machine. The manufacturers may discontinue, or change the specifications of, such
general-purpose parts. If this is the case, Sega cannot repair or replace a failed
game machine whether or not a warranty period has expired.
www.seuservice.com
2
2. PRECAUTIONS CONCERNING INSTALLATION LOCATION
WARNING!
This product is an indoor game machine. Do not install it outside. Even indoors, avoid
installing in places mentioned below so as not to cause a fire, electric shock, injury
and or malfunctioning.
Places subject to rain or water leakage, or places subject to high humidity in the
proximity of an indoor swimming pool and or shower, etc.
Places subject to direct sunlight, or places subject to high temperatures in the proximity of heating units, etc.
Places filled with inflammable gas or vicinity of highly inflammable/volatile chemicals or hazardous matter.
Dusty places.
Sloped surfaces.
Places subject to any type of violent impact.
Vicinity of anti-disaster facilities such as fire exits and fire extinguishers.
The operating (ambient) temperature range is from 5˚ to 30˚.
LIMITATIONS OF USAGE REQUIREMENTS
WARNING!
Be sure to check the Electrical Specifications.
Ensure that this product is compatible with the location's power supply, voltage and
frequency requirements.
A plate describing Electrical Specifications is attached to the product.
Non-compliance with the Electrical Specifications can cause a fire and electric
shock.
This product requires the Breaker and Earth Mechanisms as part of the location
facilities. Using them in a manner not independent can cause a fire and electric
shock.
Ensure that the indoor wiring for the power supply is rated at 15A or higher (AC
single phase 100 ~ 120V area), and 8A or higher (AC 220 ~ 240V area). Non-compliance with the Electrical Specifications can cause a fire and electric shock.
Be sure to independently use the power supply equipped with the Earth Leakage
Breaker. Using a power supply without the Earth Leakage Breaker can cause an
outbreak of fire when earth leakage occurs.
Putting many loads on one electrical outlet can cause generation of heat and a fire
resulting from overload.
When using an extension cord, ensure that the cord is rated at 15A or higher (AC
100 ~ 120V area) and 8A or higher (AC 220 ~ 240V area). Using a cord rated
lower than the specified rating can cause a fire and electric shock.
3
www.seuservice.com
OPERATION AREA
WARNING!
STOP
For the operation of this machine, secure a minimum area of 40in (W) X 85in (D).
In order to prevent injury resulting from the falling down accident during game
play, be sure to secure the minimum area for operation.
Be sure to provide sufficient space so as to allow this product's ventilation fan to
function efficiently. To avoid machine malfunctioning and a fire, do not place any
obstacles near the ventilation opening.
SEGA shall not be held responsible for damage, compensation for damage to a third
party, resulting from the failure to observe this instruction.
For transporting the machine into the location's building, the minimum necessary dimensions of the opening (of doors, etc.) are 31in (W) and 78in (H).
IMPORTANT!
30.14 in.
Electric current consumption
8 in.
MAX. 5 A (AC 120V 60 Hz)
Vent approx. 8 in.
76.5 in.
FIG. 2
www.seuservice.com
4
3. OPERATION
PRECAUTIONS TO BE HEEDED BEFORE STARTING THE OPERATION
To avoid injury and trouble, be sure to constantly give careful attention to the behavior and manner of
the visitors and players.
WARNING!
In order to avoid accidents, check the following before starting the operation:
To ensure maximum safety for the players and the customers, ensure that where
the product is operated has sufficient lighting to allow any warnings to be read.
Operation under insufficient lighting can cause bodily contact with each other,
hitting accident, and or trouble between customers.
Be sure to perform appropriate adjustment of the monitor (projector). For operation
of this machine, do not leave monitor's flickering or deviation as is. Failure to
observe this can have a bad influence upon the players' or the customers' physical
conditions.
It is suggested to ensure a space allowing the players who feel sick while playing
the game to take a rest.
Check if all of the adjusters are in contact with the
surface. If they are not, the Cabinet can move and
cause an accident.
Ensure that all of the Adjusters are in contact with the floor.
5
www.seuservice.com
WARNING!
CAUTION!
Do not put any heavy item on this product. Placing any heavy item on the product
can cause a falling down accident or parts damage.
Do not climb on the product. Climbing on the product can cause falling down accidents. To check the top portion of the product, use a step.
To avoid electric shock, check to see if door & cover parts are damaged or omitted.
To avoid electric shock, short circuit and or parts damage, do not put the following
items on or in the periphery of the product.
Flower vases, flowerpots, cups, water tanks, cosmetics, and receptacles/containers/
vessels containing chemicals and water.
To avoid injury, be sure to provide sufficient space by considering the potentially
crowded situation at the installation location. Insufficient installation space can cause
making bodily contact with each other, hitting accidents, and or trouble between customers.
www.seuservice.com
6
PRECAUTIONS TO BE HEEDED DURING OPERATION (PAYING ATTENTION TO CUSTOMERS)
To avoid injury and trouble, be sure to constantly give careful attention to the behavior and manner of
the visitors and players.
To avoid injury and accidents, those who fall under the following categories are not
allowed to play the game.
WARNING!
• Those who need assistance such as the use of an apparatus when walking.
• Those who have high blood pressure or a heart problem.
• Those who have experienced muscle convulsion or loss of consciousness when playing
video game, etc.
• Those who have a trouble in the neck and or spinal cord.
• Intoxicated persons.
• Pregnant women or those who are in the likelihood of pregnancy.
• Persons susceptible to motion sickness.
• Persons whose act runs counter to the product's warning displays.
A player who has never been adversely affected by light stimulus might experience
dizziness or headache depending on his physical condition when playing the game.
Especially, small children can be subject to those conditions. Caution guardians of
small children to keep watch on their children during play.
Instruct those who feel sick during play to have a medical examination.
To avoid electric shock and short circuit, do not allow customers to put hands and
fingers or extraneous matter in the openings of the product or small openings in or
around the doors.
To avoid falling down and injury resulting from falling down, immediately stop the
customer's leaning against or climbing on the product, etc.
To avoid electric shock and short circuit, do not allow the customers to unplug the
power plug without a justifiable reason.
WARNING!
CAUTION!
Instruct the player to take a firm
grip of the handle Bars during
play. This machine reacts as per
the contents of the game. To
avoid injury, instruct the players
to refrain from single-handed
taking grip of the handle Bar
(which is very likely to cause
potentially hazardous situation,
should he attempt to do so).
Immediately stop such violent acts as hitting and kicking the product. Such violent
acts can cause parts damage or falling down, resulting in injury due to fragments
and falling down.
7
www.seuservice.com
4. NAME OF PARTS
Marquee
Monitor
Control Panel
Seat
TABLE 4 Dimensions and Weights
Items
Width
X
Depth
X Height
Weight
Cabinet
30.25in (W) X 35.75in (D) X 77.5in (H)
450 lbs
Seat Section
30.25in (W) X40.75in (D) X 25.25in (H)
100 lbs
30.25in (W) X 76.5in (D) X 77.5in (H)
550 lbs
When assembled
www.seuservice.com
8
5. ACCESSORIES
When transporting the machine, make sure that the following parts are supplied.
TABLE 5 a ACCESSORIES
DESCRIPTION
Part No. (Qty.)
Note
OWNERS MANUAL
999-XXXX (1)
Figures
If Part No. has no description, the Number has not been
registered or can not be registered. Such a part may not be
obtainable even if the customer desires to purchase it.
Therefore, ensure that the part is in safekeeping with you.
KEY MASTER
220-5576 (2)
For opening/closing the doors
KEY (2)
For the CASHBOX DOOR
The Keys are inside the Coin Chute Door at the time of shipment
from the factory.
SERVICE MANUAL NAOMI ENG
420-6455-01 (1)
INSTRUCTION MANUAL FOR THE
GAME BOARD
TAMPERPROOF
WRENCH
T-27 Torx 1/4-20 (1)
T-15 Torx 8/32 (1)
Tool
9
www.seuservice.com
HOW TO USE THE CARTON BOX
STOP
IMPORTANT!
When requesting for the replacement/repair of this product's Game Board (NAOMI
BOARD), follow the instructions below. Transporting the Game Board in an undesignated status is unacceptable. An erroneous handling can cause parts damage.
• Put the Game Board in the Carton Box together with the Shield Case. Do not unnecessarily disassemble nor remove parts.
• By paying careful attention to the following Figure and the direction shown by onCarton-Box printing, put the Shield Case in the Carton Box.
• When putting the Shield Case in the Carton Box, do not remove Leg Brackets.
• The projected portions of the packing material is intended for cushioning. Therefore, do not bend the projected portions.
"CHECK SIDE" Display
①
Serial No. Display
③
②
FILTER BOARD
Projected portions of
the packing material.
Serial No. Display
FIG. 5
Bend the packing material in numerical order, and wrap the Shield Case with the packing material
and put it in the Carton Box as shown. Putting it upside down or packing otherwise in the manner not
shown can damage the Game Board and the parts.
www.seuservice.com
10
6. ASSEMBLING AND INSTALLATION
Perform assembly work by following the procedure herein stated. Failing to comply with the instructions can cause electric shock hazard.
Perform assembling as per this manual. Since this is a complex machine, erroneous
assembling can cause an electric shock, machine damage and or not functioning as
per specified performance.
When assembling, be sure to use plural persons. Depending on the assembly work,
there are some cases in which working by one person alone can cause personal
injury or parts damage.
Ensure that connectors are accurately connected. Incomplete connections can cause
electric shock hazard.
Be careful so as not to damage wirings. Damaged wiring can cause electric shock
and short circuit hazards.
Do not carelessly push the PTV. Pushing the PTV carelessly can cause the PTV to
fall down.
This work should be performed by the Location's Maintenance Man or Serviceman.
Performing work by non-technical personnel can cause a severe accident such as
electric shock. Failing to comply with this instruction can cause a severe accident
such as electric shock to the player during operation.
Provide sufficient space so that assembling can be performed. Performing work in
places with narrow space or low ceiling may cause an accident and assembly work
to be difficult.
To perform work safely and avoid serious accident such as the cabinet's falling
down, do not perform work in places where step-like grade differences, a ditch, or
slope exist.
WARNING!
CAUTION!
To perform work safely and securely, be sure to prepare a step which is in a secure and
stable condition. Performing work without using the step can cause violent falling
down accidents.
When carrying out the assembling and installation, follow the following 7-item sequence.
1
SECURING IN PLACE (ADJUSTER ADJUSTMENT)
2
POWER SUPPLY, AND EARTH CONNECTION
3
TURNING POWER ON
4
ASSEMBLY CHECK
11
www.seuservice.com
Tools required for the work
KEY MASTER
Phillips type screwdriver (for M4, M5 screw)
WRENCH (for M16 hexagon bolt)
Box nut screwdriver (for M4 hexagon nut) or WRENCH
www.seuservice.com
12
1
SECURING IN PLACE (ADJUSTER ADJUSTMENT)
WARNING!
Make sure that all of the adjusters are in contact with the floor. If they are not, the
cabinet can move and cause an accident.
This product has 8 casters (4 for FRONT CABINET, 4 for REAR CABINET) and 8 Adjusters
(4 for FRONT CABINET, 4 for REAR CABINET). (FIG. 6. 3a) When the installation position is
determined, cause the adjusters to come into contact with the floor directly, make adjustments in a
manner so that the casters will be raised approximately 5mm from the floor and make sure that the
machine position is level.
CASTER
1 Transport the product to the
installation position. Be sure to
provide adequate space allowing
the player to get on and off.
2 Have all of the Adjusters make
contact with the floor. Adjust
the Adjuster's height by using
a wrench so that the machine
position is kept level.
3 After making adjustment, fasten
the Adjuster Nut upward and
secure the height of Adjuster
(FIG. 6. 3 b).
ADJUSTER
FIG. 6. 3 a BOTTOM VIEW
Note: Actual unit will differ from image.
ADJUSTER
CASTER
FASTEN UPWARD.
Approx.5mm
FIG. 6. 3 b ADJUSTER
ADJUSTER
Note: Actual unit will differ from image.
10cm
15cm
FIG. 6. 3 c
FIG. 6. 3 d
Refer to this Fig. (Scale:1/100) for
the layout of the place of installation.
Be sure to provide space as shown between the Air
Vent and the wall surface.
13
www.seuservice.com
2
POWER SUPPLY, AND EARTH CONNECTION
Be sure to independently use the power supply socket outlet equipped with an Earth
Leakage Breaker. Using a power supply without an Earth Leakage Breaker can
cause a fire when electric leakage occurs.
Ensure that the "accurately grounded indoor earth terminal" and the earth wire cable
are available (except in the case where a power cord plug with earth is used). This
product is equipped with the earth terminal. Connect the earth terminal and the indoor earth terminal with the prepared cable. If the grounding work is not performed
appropriately, customers can be subjected to an electric shock, and the product's
functioning may not be stable.
Ensure that the power cord and earth wire are not exposed on the surface (passage,
etc.). If exposed, they can be caught and are susceptible to damage. If damaged,
the cord and wire can cause electric shock and short circuit accidents. Ensure that
the wiring position is not in the customer's passage way or the wiring has protective
covering.
After wiring power cord on the floor, be sure to protect the power cord. Exposed
power cord is susceptible to damage and causes an electric shock accident.
WARNING!
The AC Unit is mounted on the right side of the machine. The AC Unit has Main SW, Circuit Protector, Earth Terminal and the Inlet which connects the Power Cord.
1 Ensure that the Main SW is OFF.
MAIN SW
CIRCUIT PROTECTOR
Main SW off
INLET
EARTH TERMINAL
Connect with the
indoor earth terminal.
AC Cable (Power Cord)
FIG. 6. 5 a AC UNIT
www.seuservice.com
14
2 Connect one end of the earth wire to the AC Unit earth
terminal, and the other end to the indoor earth terminal. The AC Unit earth terminal has a Bolt and Nut
combination. Take off the Nut, pass the end of earth
wire through the Bolt, and fasten the Nut.
Connect the Earth Wire
to the Earth Terminal.
3 Note that the Earth Wire is incorporated in the Power
Cord for the Areas of AC 120V (USA) and AC 220 ~
240V, and therefore, this procedure is not necessary.
FIG. 6. 5 b Earth Wire Connection
4 Firmly insert the power plug into the
socket outlet.
Insert the opposite side of Power Cord
plug to the AC Unit's connector ("INLET").
5 Perform wiring for the Power Cord
and Earth Wire. Install protective
covering for the Power Cord and
Earth Wire.
Wiring Cover
FIG. 6. 5 c Connecting Power Cord and Earth Wire
In case the Power Plug is apt to come out of place, secure the
Power Cord to the periphery of the AC Unit with the Cord Clamp
(an accessory).
HOW TO USE THE CORD CLAMP
15
www.seuservice.com
3
TURNING POWER ON
Turn the AC Unit Main SW ON to turn on the machine's power supply. At the same time the power is
turned on for the power supply, the machine starts the initialization setting and displays the screen on
which the setting is being made. Do not touch the Ride until the initialization setting movements are
automatically finished.
After finishing the initialization setting movements, the ADVERTISE mode returns. During the
setting movements, if any irregularity, malfunctioning, etc. of the moving mechanism are found,
ERROR display is shown on the lower part of the ADVERTISE mode screen. In this case, the
machine will not operate satisfactorily. Please contact the Distributor, etc. where this product was
purchased from.
In the case where several machines are connected, network check is performed after initialization
settings are finished, and the screen displays to the effect that the check is being conducted. After
checking, the ADVERTISE mode returns. Normally the network checking takes 1 ~ 3 minutes. If
there is any irregularity in the communication connection, check screen display will continue.
www.seuservice.com
16
4
ASSEMBLY CHECK
In the TEST MODE, ascertain that the assembly has been made correctly and IC BD is satisfactory
(refer to Section 9).
In the test mode, perform the following test:
( 1 ) MEMORY TEST
Selecting the RAM TEST in the test mode
menu causes the on-board memory to be tested
automatically. The game board is satisfactory if the
display beside each IC No. shows GOOD.
RAM TEST
IC29 GOOD
IC35 GOOD
IC09 GOOD IC10 GOOD
IC11 GOOD IC12 GOOD
IC16 GOOD IC18 GOOD
IC20 GOOD IC22 GOOD
IC17 GOOD IC19 GOOD
IC21 GOOD IC23 GOOD
PRESS TEST BUTTON TO EXIT
( 2 ) C.R.T. TEST
C.R.T. TEST 1/2
1
32
RED
GREEN
BLUE
WHITE
In the test mode menu, selecting C.R.T. TEST allows the screen
(on which the projector is tested) to be displayed. Although the
projector adjustments have been made at the time of shipment
from the factory, color deviation, etc., may occur due to the effect
caused by geomagnetism, the location building's steel frames and
other game machines in the periphery. By watching the test mode
screen, make judgment as to whether an adjustment is needed. If
it is necessary, adjust the projector by referring to Section 14.
PRESS TEST BUTTON TO CONTINUE
C.R.T. TEST 2/2
PRESS TEST BUTTON TO EXIT
17
www.seuservice.com
( 3 ) SOUND TEST
In the test mode, selecting SOUND TEST causes
the screen (on which sound related BD and wiring
connections are tested) to be displayed.
Be sure to check if the sound is satisfactorily
emitted from each speaker and the sound volume is
appropriate.
SOUND TEST
RIGHT SPEAKER
LEFT SPEAKER
EXIT
OFF
OFF
SELECT WITH SERVICE BUTTON
AND
PRESS TEST BUTTON
( 4 ) INPUT TEST
INPUT TEST
HANDLE BAR
ROLL
THROTTLE LEVER
PITCH
0H
0H
FFH
0H
START
VIEW
SAFETY SENSOR
SERVICE
TEST
OFF
OFF
OFF
OFF
OFF
Selecting the INPUT TEST on the test mode menu
screen causes the screen (on which each switch and
V. R. are tested) to be displayed. Press each switch.
If the display beside each switch indicates "ON," the
switch and wiring connections are satisfactory.
Check the display of each V.R. value. If the V. R. is
malfunctioning, refer to Sections 11 & 12.
PRESS TEST AND SERVICE BUTTON TO EXIT
( 5 ) OUTPUT TEST
OUTPUT TEST
> START LAMP
VIEW LAMP
EXIT
In the output test mode, carry out lamp test to
ascertain that each lamp lights up satisfactorily.
OFF
OFF
SELECT WITH SERVICE BUTTON
AND PRESS TEST BUTTON
Perform the above inspections also at the time of monthly inspection.
www.seuservice.com
18
7. PRECAUTIONS TO BE HEEDED WHEN MOVING THE MACHINE
WARNING!
When moving the machine, be sure to pull out the plug from the power supply.
Moving the machine with the plug as is inserted can cause the power cord to be
damaged, resulting in a fire and or electric shock.
When moving the machine on the floor, retract the Adjusters and ensure that Casters make contact with the floor. During transportation, pay careful attention so
that Casters do not tread power cords and earth wires. Damaging the power cords
can cause an electric shock and or short circuit.
In places where step-like grade differences exist, be sure to separate the Base, and
the Cabinet. Inclining the Base can cause the Cabinet to fall off from the Base and
result in injury.
When lifting the cabinet, be sure to hold the catch portions or bottom part. Lifting
the cabinet by holding other portions can damage parts and installation portions
due to the empty weight of the cabinet, and cause personal injury.
When moving the unit, do not push it from the rear side. Push it from sideways.
Do not push the
cabinet from the
left/right direction.
* Note: Image differs from actual Unit.
FIG. 8 a
19
www.seuservice.com
When transporting the product in places with steps
or step-like differences in grade, disassemble into
each unit before transporting.
FIG. 7 b
www.seuservice.com
20
8. CONTENTS OF GAME
The following explanations apply to the case the product is functioning satisfactory. Should there be
any moves different from the following contents, some sort of faults may have occurred. Immediately
look into the cause of the fault and eliminate the cause therefore to ensure satisfactory operation.
System Behavior in Advertising (Plying-for-Hire) Mode
While the power is connected to the system, in an advertising mode, the system opens an operation
explanation screen or a ranking data screen. The view button flashes when the screen explains how to
operate the view button.
Located on the left and right sides above the monitor, the speakers output audio information. You may
set the ADVERTISE SOUND item to OFF on the GAME ASSIGNMENTS screen so that this audio
output function is disabled in an advertising mode.
The start button flashes when the screen displays the PRESS START BUTTON message. This PRESS
START BUTTON message appears in two cases; when the credit reaches a game-startable level in an
advertising mode and shortly after opening the operation explanation screen.
Fluorescent lamps are lit.
Emits sounds.
Image output on the monitor.
Throttle Lever
Start Button
Handlebars
View Button (Change the viewpoint)
Coin Inlet
Ride
FIG. 8 a External View of the Cabinet
21
www.seuservice.com
Features of the WaveRunner GP
It provides several marine scenes where a cruising course appearance varies from play to play.
The WaveRunner GP game features:
• Effects of Stern Wave
A stern wave is the wave produced on the wake of a boat. If your boat runs on the stern waves
produced by another boat, it may jump unexpectedly, reduce its speed, or meet any other
navigating difficulty. You must prevent your boat from running on the stern waves and navigate it
with attention to where and how other boats are moving.
• Water-Level-Depending Jumps
A large jump (or a group of small jumps) may appear on the course when a water level is lower (or
higher). The jump that was submerged on your first round cruise may be above the water on your
second round cruise. Therefore, you must navigate your boat differently and/or change a cruising
path, from cruise to cruise, so that you can use an approaching jump.
How to Play
• Insert the coin(s).
• Make sure that the screen shows the PRESS START BUTTON message and that the start button
flashes, and then climb onto the seat.
• Press the start button, and make sure that the operation explanation screen appears. (See the note 1
below.)
• Wait until the time is counted down to 0 (zero) on the operation explanation screen or alternately
press the start button to exit the screen. In either case the COURSE SELECT screen appears.
Highlights a selected
course.
Illustrates a course
layout.
Indicates a limit
time for a course
selection.
Shows an image of the
selected course.
Indicates how to operate
the handlebars and the
throttle lever.
FIG. 8 b
www.seuservice.com
22
• The system provides three courses: NOVICE, INTERMEDIATE, and EXPERT. These are
displayed on the upper part of the screen. The selected course is highlighted. To migrate from one
course to another, turn the handlebars leftwards or rightwards. To decide a course, squeeze the
throttle lever. (See the note 2 below.)
Grip the throttle lever to
decide a course.
Turn the handlebars left/right
to choose the course.
Start button
FIG. 8 c
View button
• Wait until the time is counted down to 0 (zero) on the screen, and then the game starts. (See the
note 3 below.)
• Make sure that the boat starts to move at this moment.
• The screen shows some information; your ranking position among the players (on its upper right
part), a limit time (upper middle), your lap time, best lap time record, and best total time record
(upper left), a tachometer and a speed meter (bottom right), and a speed-down gauge (bottom left).
The speed-down gauge indicates a reduction of the cruising speed as a result of your boat running
on the stern waves. It is dimmed when your boat is not running on the stern waves.
Limit Time
Player's Lap Time
Player's Ranking
Position
Best Lap Time Record
Best Total Time Record
Tachometer and
Speed Meter
Speed-Down Gauge
(It is dimmed when your boat
is not running on the stern
waves.)
FIG. 8 d
23
www.seuservice.com
• When your boat runs on the stern waves, the speed-down gauge is undimmed and its triangle
becomes filled with shade. If you keep your boat running on the stern waves, the triangle is shaded
more and more.
When the triangle is fully shaded, a warning message "Get out of the wake!" appears on the screen.
If you make your boat off the stern waves at this moment, the speed-down gauge is again dimmed.
If not, it is initialized to 0 (zero) and becomes filled with shade again.
Initially the gauge is dimmed.
When the boat runs on the stern
waves, the gauge is undimmed
and becomes filled with shade.
FIG 8 e
When the gauge is fully
shaded, a warning message
appears.
• When the game starts, the system starts counting down the limit time. If you successfully pass a
checkpoint on the course within the limit time, the bonus time is added to the remaining time. If not,
the game is over. (See the note 4 below.)
• For any course of NOVICE, INTERMEDIATE, or EXPERT. When you have successfully cruised
around it two times, you reach the goal and the game is over. (See the note 5 below.)
• To navigate the boat while playing the game, use the throttle lever and the handlebars, and tilt up the
boat by shifting your body. To increase a cruising speed, squeeze the throttle lever while to decrease
un-squeeze. To turn the boat leftwards and rightwards, turn the handlebars leftwards and rightwards
respectively. To quickly turn the boat, turn the handlebars and then tilt up the boat to a turning direction of the handlebars. Note that just tilting up the boat without turning the handlebars does not
enable to turn the boat. Press the view button to toggle a viewpoint between a navigator's point and
a rearward point.
• When reaching the goal, you can register your name if your lap time is good. Your registered name
will be on a screen's ranking list in an advertising mode.
NOTES:
1) For an interactive communication play. Insert the one-play worth of coin(s) on the operation
explanation screen and press the start button to enter the race. The system opens the entry screen
where you wait until an opposition will enter the race by also inserting the one-play worth of
coin(s) and pressing the start button. The entry screen closes and the operation explanation screen
opens automatically, when a limit time is counted down to 0 (zero).
2) For an interactive communication play. When every player, after entering the race, has finished
selecting a course, the racing course is decided by majority. In case of a tie, the course with a lower
difficulty level is chosen.
3) Alternately, you can press the start button to decide a course.
4) For an interactive communication play. The bonus time is added to the remaining time when a
leading player passes a checkpoint. The place of a player is indicated as 'place/the number of
players' (e.g. 2/4 for a 4-player race, 1/2 for 2-player race). A player number, as 1P and 2P, is
shown above the head of a playing character on the screen.
5) You cannot change the number of rounding cruises.
www.seuservice.com
24
Outline of the Courses
Three cruising courses are provided as below. Note that they are different from each other not only in
the difficulty level but also in the appearance and device.
• Novice Course
This course gives the image of a tropical island against a blue sky where the hot sun grills white
beaches. Generally, this novice course curves very gently.
There are three checkpoints including a starting point.
When your boat approaches a palm tree, the coconuts will fall down on your cruising path. Three
dolphins may appear on the way and accompany your boat.
The key part for reaching the goal is located at the end of the course that is sharply curved and
enclosed with the cliffs.
• Intermediate Course
This course gives the image of a thick rainforest with mysterious remains. Generally, this
intermediate course is a very narrow river with rather many curves.
There are four checkpoints including a starting point.
The highlight of this course is a jump from the 50-meter giant waterfall.
In the mangrove woodlands, tall mangroves block your boat. You must be careful not to let it hit
against them.
Big snakes and giant fishes produce an atmosphere of rainforest.
The key parts for reaching the goal are the curves located short of the giant waterfall, in the
mangrove woodlands, and in the cave at the end of the course. You must navigate your boat with
careful attention to these curved spots.
• Expert Course
This course gives the image of a waterfront where the surrounding skyscrapers are blazing in the
evening darkness. This expert course features several combinations of a straight path and a sharp
curve.
There are four checkpoints including a starting point.
All the scenes (the likes of the Brooklyn Bridge, the Statue of Liberty, and the Broadway with loud
neon signs and large illumination bulletin boards) produce an atmosphere of big city.
The key part for reaching the goal is the sharp curves located immediately after the straight paths.
25
www.seuservice.com
9. EXPLANATION OF TEST AND DATA DISPLAY
By operating the switch unit, periodically perform the tests and data check. When installing the machine initially or collecting cash, or when the machine does not function correctly, perform checking
in accordance with the explanations given in this section.
The following shows tests and modes that should be utilized as applicable.
NAOMI GAME BOARD is used for the product. The system of this game board allows another
game to be played by replacing the ROM Board Case mounted on the NAOMI CASE. As such, the
Test Mode of this system consists of the System Test Mode for the system to execute SELF-TEST,
COIN ASSIGNMENTS, etc. used in common for the machines employing the NAOMI BOARD, and
the Game Test Mode for the specific product to execute Input/Output test for the operation equipment,
difficulty setting, etc.
STOP
IMPORTANT!
When the 2 or more machines are linked for communication play, be careful to enter the
TEST mode. If one of the machines linked enters the TEST mode, all others display the
NETWORK CHECK screen.
www.seuservice.com
26
TABLE 10 EXPLANATION OF TEST MODE
ITEMS
DESCRIPTION
REFERENCE
SECTIONS
INSTALLATION
OF MACHINE
When the machine is installed, perform the following:
1. Check to see that each setting is as per standard setting made at
the time of shipment.
2. In the INPUT TEST mode, check such input devices as each
SW, V.R., etc.
3. In the OUTPUT TEST mode, check such output devices as
lamps, motors, etc.
4. In the self-test mode, check ICs on the IC Board.
SERVICE MANUAL
9-3d
MEMORY
Choose the board test item in the MENU mode to allow the selftest to be performed. In this test, PROGRAM RAMs, ROMs, and
ICs on the IC Board are checked.
SERVICE MANUAL
PERIODIC
SERVICING
Periodically perform the following:
1. Self-Test
2. Ascertain each setting.
3. In the INPUT TEST mode, test the control device.
4. In the OUTPUT TEST mode, check such output devices as
lamps, motors, etc.
CONTROL
SYSTEM
1. In the INPUT TEST mode, check such input devices as each
SW, V.R., etc.
2. Adjust or replace each SW and VR.
3. If the problem can not be solved yet, check the control's moves.
SERVICE MANUAL
MONITOR
In the MONITOR ADJUSTMENT mode, check to see if the
MONITOR adjustment is appropriately made.
SERVICE MANUAL
14
IC BOARD
1. Self-Test
2. In the SOUND TEST mode, check the sound related ROMs.
SERVICE MANUAL
SERVICE MANUAL
DATA CHECK
Check such data as game play time and histogram to adjust the
difficulty level, etc.
SERVICE MANUAL
9-3h
27
9-3b
9-3c
SERVICE MANUAL
SERVICE MANUAL
9-3d, e
9-3b
9-3c
9-3e
11,12
www.seuservice.com
9 - 1 SWITCH UNIT AND COIN METER
WARNING!
Do not touch places other than those specified. Touching places not specified can cause
an electric shock or short circuit accident.
Adjust to the optimum sound volume by considering the environmental
requirements of the installation location.
If the COIN METER and the game board are electrically disconnected, game play
is not possible.
STOP
IMPORTANT!
SWITCH UNIT
TEST BUTTON
Open the coin chute door, and the switch unit
shown will appear. The functioning of each SW
is as follows:
SOUND VOLUME
SERVICE BUTTON
FIG. 9. 1 a SWITCH UNIT
TEST BUTTON
:
For the handling of the test button, refer to the following pages.
:
Gives credits without registering on the coin meter.
:
Adjust the Speaker Volume.
(TEST)
SERVICE BUTTON
(SERVICE)
SOUND VOLUME
(SOUND VOLUME)
COIN METER
Open the Cashbox Door with the exclusively used key
and the COIN METER will appear underneath the
Cashbox.
COIN METER
FIG. 9. 1 b COIN METER
www.seuservice.com
28
9 - 2 SYSTEM TEST MODE
The contents of settings changed in the TEST mode are stored when the test mode
is finished from EXIT in the menu mode. If the power is turned off before the
TEST mode is finished, the contents of setting change become ineffective.
Executing "BACKUP DATA CLEAR" in the SYSTEM TEST MODE does not
clear the BOOKKEEPING data in the GAME TEST mode.
Entering the TEST mode clears fractional number of coins less than one credit and
BONUS ADDER data.
Perform setting as per specified in this manual for operation. If setting not specified is performed for operation, proper function of this product may not be obtained.
STOP
IMPORTANT!
In the SYSTEM TEST MODE, IC BD functioning can be checked, the monitor adjusted, and the coin
setting performed.
Refer to NAOMI SERIVCE MANUAL for the details. Note that the setting of the following items
need to be performed in accordance with the instruction given.
•
•
•
•
CABINET TYPE:
1PLAYER(S)
MONITOR TYPE: HORIZONTAL
SERVICE TYPE:
COMMON
COIN CHUTE TYPE: COMMON
The SEQUENCE SETTING items of COIN ASSIGNMENTS are as follows.
• SEQUENCE SETTING
SEQUENCE 1:
Number of credits required for starting the game.
SEQUENCE 2:
Number of credits required for continuing the play.
SEQUENCE 3 ~ 8: NOT USED
29
www.seuservice.com
9 - 3 GAME TEST MODE
As soon as it enters the Game Test mode, the Ride starts moving. Before entering the
Game Test Mode, be sure to keep away a person(s) from the Ride. Since the Ride
moves momentarily, it may cause accidents.
CAUTION!
The new settings will not take effect until the Game Test Mode is exited. When you
make change to the settings, exit the Game Test Mode by proper operation.
You must not attempt to demonstrate this game (for the selling purpose) with any
other settings other than those specified in this document. Use of such settings may
cause malfunctions or bad operation on the machine.
STOP
IMPORTANT!
GAME TEST MENU
By selecting GAME TEST MODE from the System Test Menu Screen, the Game Test Mode Menu
Screen is displayed as follows.
SYSTEM MENU
RAM TEST
JVS TEST
SOUND TEST
C.R.T. TEST
SYSTEM ASSIGNMENTS
COIN ASSIGNMENTS
BOOKKEEPING
BACKUP DATA CLEAR
CLOCK SETTING
GAME TEST MENU
INPUT TEST
OUTPUT TEST
GAME ASSIGNMENTS
VOLUME SETTING
VALVE TEST
WIRING TEST
BOOKKEEPING
BACKUP DATA CLEAR
> EXIT
ROM BOARD TEST
GAME TEST MODE
[*****************]
-> EXIT
SELECT WITH SERVICE BUTTON
AND PRESS TEST BUTTON
SELECT WITH SERVICE BUTTON
AND
PRESS TEST BUTTON
System Test Menu Screen
FIG. 9. 3 a Game Test Menu Screen
• Press the TEST Button to cause the following Test Menu to be displayed on the monitor.
• Press the SERVICE Button until the pointer ">" is moved to the desired item to make a selection.
• Bring the pointer ">" to the desired item and press the TEST Button to enter the selected item's
test.
• In the Test mode, the Start button instead of Test button and the View button instead of Service
button can be used. These, however, can not be used in the INPUT TEST.
• After the test is complete, move ">" to "EXIT" and press the TEST Button to return to the System
Test Menu Screen.
www.seuservice.com
30
INPUT TEST
When INPUT TEST is selected, the following screen appears on the monitor. The screen allows the
status of each SW and the value of each V.R. of the cabinet to be viewed.
On this screen, periodically check the status of each switch & V.R.
INPUT TEST
HANDLE BAR
ROLL
THROTTLE LEVER
PITCH
START
VIEW
SAFETY SENSOR
SERVICE
TEST
FFH
• By pressing each switch, if the display on the
right-hand side of the name of each switch
changes to ON from OFF, the SW and the wiring
connections are satisfactory.
0H
0H
0H
• Simultaneously pressing the Service button and
the Test button returns the Game Test Menu
screen.
OFF
OFF
OFF
OFF
OFF
PRESS TEST AND SERVICE BUTTON TO EXIT
The standard values for adjusting each V. R. are as follows:
In this product, the item of VOLUME SETTING allows V. R. values except for PITCH to be set.
THROTTLE LEVER: e 0 H + 9 (lever released)
Without a moving base you will not be able to do ROLL, PITCH, or SAFETY SENSOR.
31
www.seuservice.com
OUTPUT TEST
The OUTPUT TEST allows the function of each lamp to be checked.
OUTPUT TEST
> START LAMP
VIEW LAMP
EXIT
OFF
OFF
SELECT WITH SERVICE BUTTON
AND PRESS TEST BUTTON
FIG. 9. 3 c OUTPUT TEST Screen
TEST PROCEDURE
1 Press the SERVICE Button to bring the arrow to the lamp item to be tested.
2 Pressing the TEST Button causes "ON" to be displayed and the corresponding lamp lights up.
Pressing the TEST Button again causes "OFF" to be displayed and the lamp goes off.
3 Bring the arrow to EXIT and press the TEST Button to return to the Game Test Menu screen.
www.seuservice.com
32
GAME ASSIGNMENTS
Selecting the GAME ASSIGNMENTS in the menu mode causes the present game setting to be
displayed and also the game setting changes can be made. Each item displays the following content.
If the COMMUNICATION MODE is set to NO LINK, the items HANDICAP and CABINET ID will
not appear.
GAME ASSIGNMENTS
GAME DIFFICULTY
COMMUNICATION MODE
HANDICAP
CABINET ID
NORMAL
NO LINK
ON
1
> EXIT
SELECT WITH SERVICE BUTTON
AND PRESS TEST BUTTON
FIG. 9. 3 d GAME ASSIGNMENTS Screen
GAME DIFFICULTY:
The game difficulty can be differentiated by varying Time
at the time of starting the race and Time at the time of passing
the checkpoint. Choose one from among 3 categories, i.e.,
EASY, NORMAL and HARD.
COMMUNICATION MODE: Set up whether the communication (interactive) play is
enabled. There are 3 categories, i.e. MASTER (for one
machine/player only), SLAVE (for communication
play), and NO LINK (not for communication play).
HANDICAP:
In the communication vs. play, this sets whether correction should
be made so that player boat in the second or lower positions
increase the speed. Correction is used with ON and use of
correction is cancelled with OFF.
CABINET ID:
When linked for communication play, allocate the numbers
sequentially in order starting from the leftmost end.
For Communication play, refer to Section 20 "COMMUNICATION PLAY".
SETTING CHANGE PROCEDURE
1 Press the SERVICE Button to bring the arrow (>) to the desired setting change item.
2 Press the TEST Button to choose the desired setting item.
3 Bring the arrow to EXIT and press the TEST Button to return to the Game Test Menu screen.
33
www.seuservice.com
VOLUME SETTING
In this setting item, each V. R. value of the Handlebars, Roll, and Throttle can be set.
STOP
IMPORTANT!
When V. R. adjustment or replacement has been made, be sure to perform the setting in
that particular V. R. value setting item.
VOLUME SETTING
> HANDLE BAR
ROLL
THROTTLE LEVER
EXIT
SELECT WITH SERVICE BUTTON
AND PRESS TEST BUTTON
FIG. 9. 3 e a VOLUME SETTING Screen
www.seuservice.com
34
(1) HANDLE BAR VOLUME SETTING
HANDLE BAR VOLUME SETTING
MAX
MIN
NEUTRAL
00
00
00
(FF)
(01)
(80)
> EXIT WITHOUT SAVE
EXIT WITH SAVE
SELECT WITH SERVICE BUTTON
AND PRESS TEST BUTTON
FIG. 9. 3 e b HANDLE BAR VOLUME SETTING Screen
SETTING PROCEDURE
1
In the V. R. setting menu screen, press the SERVICE Button to bring the arrow to HANDLE BAR.
2
Press the TEST Button to cause the HANDLE BAR VOLUME setting screen to appear.
3
Turn the Handlebars fully to the left/right and then release.
4
Press the SERVICE Button to bring the arrow to EXIT WITH SAVE.
5
Press the TEST Button to have the Volume Setting Menu screen return to the screen.
6
When setting other Volume values also, select the applicable select item.
7
Press the SERVICE Button to move the arrow to EXIT and press the TEST Button to return to the
Game Test Menu screen.
35
www.seuservice.com
(2) ROLL VOLUME SETTING
(1) PITCH VALVE & ETR CHECK
VALVE TEST
(2) ROLL VALVE & ETR CHECK
Being that this unit has no base. you will not be able to set the Roll Volume Setting, Pitch Valve & ETR
Check, Valve Test, or Roll Valve & ETR Check.
www.seuservice.com
36
(3) THROTTLE LEVER VOLUME SETTING
THROTTLE LEVER VOLUME SETTING
MAX
MIN
FF
FF
(3B)
(00)
> EXIT WITHOUT SAVE
EXIT WITH SAVE
SELECT WITH SERVICE BUTTON
AND PRESS TEST BUTTON
FIG. 9. 3 e d THROTTLE LEVER VOLUME SETTING Screen
SETTING PROCEDURE
1
In the Volume Setting Menu, press the SERVICE Button and bring the arrow to THROTTLE
LEVER.
2
Press the TEST Button to have the THROTTLE VOLUME SETTING screen appear.
3
Fully grip the Throttle Lever and then release.
4
By pressing the SERVICE Button, bring the arrow to EXIT WITH SAVE.
5
Press the TEST Button to have the Volume Setting Menu return on the screen.
6
When setting other Volume values also, choose the applicable setting item.
7
Press the SERVICE Button to move the arrow to EXIT and press the TEST Button to return to the
Game Test Menu screen.
37
www.seuservice.com
WIRING TEST
Selecting WIRING TEST allows the communication between GAME BD and DRIVE BD to be
checked automatically. If the communication is satisfactorily conducted, "OK" is displayed and if any
irregularity is found, "ERROR" will be displayed.
WIRING TEST
ok
ok
ok
ok
ok
ok
ok
ok
ok
ok
ok
ok
ok
ok
ok
ok
ok
ok
ok
ok
ok
ok
ok
ok
ok
ok
ok
ok
ok
ok
ok
ok
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
( f 0 ——>
( f 1 ——>
( f 2 ——>
( f 3 ——>
( f 4 ——>
( f 5 ——>
( f 6 ——>
( f 7 ——>
( f 8 ——>
( f 9 ——>
( f a ——>
( f b ——>
( f c ——>
( f d ——>
( f e ——>
( f f ——>
( 0 f ——>
( 1 f ——>
( 2 f ——>
( 3 f ——>
( 4 f ——>
( 5 f ——>
( 6 f ——>
( 7 f ——>
( 8 f ——>
( 9 f ——>
( a f ——>
( b f ——>
( c f ——>
( d f ——>
( e f ——>
( f f ——>
11111110)
11111101)
11111011)
11110111)
11101111)
11011111)
10111111)
01111111)
10111111)
11011111)
11101111)
11110111)
11111011)
11111101)
11111110)
11111111)
01111111)
10111111)
11011111)
11101111)
11110111)
11111011)
11111101)
11111110)
11111101)
11111011)
11110111)
11101111)
11011111)
10111111)
01111111)
11111111)
PRESS TEST BUTTON TO EXIT
FIG. 9. 3 g WIRING TEST Screen
• After finishing the test, if the above Figure is displayed, it is satisfactory.
• After finishing the test, press the TEST Button to return to the Game Test Menu screen.
www.seuservice.com
38
BOOKKEEPING
Selecting the BOOKKEEPING in the menu mode displays the bookkeeping data up to the present on
the following 12 screens. Press the TEST Button again to proceed to the next page. When you press
the TEST Button during the display of this mode, you return to the Game Test Menu.
BOOKKEEPING 1/12
NUMBER OF GAMES
PLAY TIME(TOTAL)
PLAY TIME(1P)
PLAY TIME(VS)
AVERAGE PLAY TIME
LONGEST PLAY TIME
SHORTEST PLAY TIME
94
0D
0D
0D
0H
0H
0H
2H 11M 11S
2H 4M 2S
0H 7M 9S
1M 23S
3M 47S
0M 2S
PRESS TEST BUTTON TO CONTINUE
FIG. 9. 3 h a BOOKKEEPING (1/12) Screen
NUMBER OF GAMES:
Number of games played.
TOTAL TIME(TOTAL):
Total energized time.
PLAY TIME(1P):
Total playtime of one player game only.
PLAY TIME(VS):
Total playtime of communication game play.
39
www.seuservice.com
(1) PLAY TIME HISTOGRAM
The time that players have been timeout is displayed in graph. It's a total of 2 screens.
BOOKKEEPING 2/12
PLAY TIME HISTOGRAM 1/2
0M00S
0M10S
0M20S
0M30S
0M40S
0M50S
1M00S
1M10S
1M20S
1M30S
1M40S
1M50S
2M00S
2M10S
2M20S
2M30S
2M40S
2M50S
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
0M09S
0M19S
0M29S
0M39S
0M49S
0M59S
1M09S
1M19S
1M29S
1M39S
1M49S
1M59S
2M09S
2M19S
2M29S
2M39S
2M49S
2M59S
22
3
1
0
2
1
5
27
1
2
3
2
2
2
3
2
2
0
PRESS TEST BUTTON TO CONTINUE
BOOKKEEPING 3/12
PLAY TIME HISTOGRAM 2/2
3M00S
3M10S
3M20S
3M30S
3M40S
3M50S
4M00S
4M10S
4M20S
4M30S
4M40S
4M50S
OVER
~ 3M09S
~ 3M19S
~ 3M29S
~ 3M39S
~ 3M49S
~ 3M59S
~ 4M09S
~ 4M19S
~ 4M29S
~ 4M39S
~ 4M49S
~ 4M59S
5M00S
4
3
3
3
1
0
0
0
0
0
0
0
0
PRESS TEST BUTTON TO CONTINUE
FIG. 9. 3 h b BOOKKEEPING (2 - 3/12) Screen
www.seuservice.com
40
(2) CLEAR TIME HISTOGRAM
The clear time of the player, which has made a goal, is displayed in graph. Screens are two screens in
NOVICE, INTERMEDIATE and EXPERT, respectively. So it's a total of 6 screens.
BOOKKEEPING 5/12
BOOKKEEPING 4/12
CLEAR TIME HISTOGRAM 2/2
NOVICE
3M00S ~ 3M09S
0
3M10S ~ 3M19S
0
3M20S ~ 3M29S
0
3M30S ~ 3M39S
2
3M40S ~ 3M49S
1
3M50S ~ 3M59S
0
4M00S ~ 4M09S
0
4M10S ~ 4M19S
0
4M20S ~ 4M29S
0
4M30S ~ 4M39S
0
4M40S ~ 4M49S
0
4M50S ~ 4M59S
0
OVER 5M00S
0
CLEAR TIME HISTOGRAM 1/2
NOVICE
0M00S ~ 0M09S
0
0M10S ~ 0M19S
0
0M20S ~ 0M29S
0
0M30S ~ 0M39S
0
0M40S ~ 0M49S
0
0M50S ~ 0M59S
0
1M00S ~ 1M09S
0
1M10S ~ 1M19S
0
1M20S ~ 1M29S
0
1M30S ~ 1M39S
0
1M40S ~ 1M49S
0
1M50S ~ 1M59S
0
2M00S ~ 2M09S
0
2M10S ~ 2M19S
0
2M20S ~ 2M29S
0
2M30S ~ 2M39S
0
2M40S ~ 2M49S
0
2M50S ~ 2M59S
0
PRESS TEST BUTTON TO CONTINUE
PRESS TEST BUTTON TO CONTINUE
BOOKKEEPING 6/12
BOOKKEEPING 7/12
CLEAR TIME HISTOGRAM 1/2
INTERMEDIATE
0M00S ~ 0M09S
0
0M10S ~ 0M19S
0
0M20S
0M30S
0M40S
0M50S
1M00S
1M10S
1M20S
1M30S
1M40S
1M50S
2M00S
2M10S
2M20S
2M30S
2M40S
2M50S
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
0M29S
0M39S
0M49S
0M59S
1M09S
1M19S
1M29S
1M39S
1M49S
1M59S
2M09S
2M19S
2M29S
2M39S
2M49S
2M59S
CLEAR TIME HISTOGRAM 2/2
INTERMEDIATE
3M00S ~ 3M09S
0
3M10S ~ 3M19S
0
3M20S ~ 3M29S
0
3M30S ~ 3M39S
0
3M40S ~ 3M49S
0
3M50S ~ 3M59S
0
4M00S ~ 4M09S
0
4M10S ~ 4M19S
0
4M20S ~ 4M29S
0
4M30S ~ 4M39S
0
4M40S ~ 4M49S
0
4M50S ~ 4M59S
0
OVER 5M00S
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
PRESS TEST BUTTON TO CONTINUE
PRESS TEST BUTTON TO CONTINUE
BOOKKEEPING 8/12
BOOKKEEPING 9/12
CLEAR TIME HISTOGRAM 1/2
EXPERT
0M00S ~ 0M09S
0
0M10S ~ 0M19S
0
0M20S ~ 0M29S
0
0M30S ~ 0M39S
0
0M40S ~ 0M49S
0
0M50S ~ 0M59S
0
1M00S ~ 1M09S
0
1M10S ~ 1M19S
0
1M20S ~ 1M29S
0
1M30S ~ 1M39S
0
1M40S ~ 1M49S
0
1M50S ~ 1M59S
0
2M00S ~ 2M09S
0
2M10S ~ 2M19S
0
2M20S ~ 2M29S
0
2M30S ~ 2M39S
0
2M40S ~ 2M49S
0
2M50S ~ 2M59S
0
CLEAR TIME HISTOGRAM 2/2
EXPERT
3M00S ~ 3M09S
0
3M10S ~ 3M19S
0
3M20S ~ 3M29S
0
3M30S ~ 3M39S
0
3M40S ~ 3M49S
0
3M50S ~ 3M59S
0
4M00S ~ 4M09S
0
4M10S ~ 4M19S
0
4M20S ~ 4M29S
0
4M30S ~ 4M39S
0
4M40S ~ 4M49S
0
4M50S ~ 4M59S
0
OVER 5M00S
0
PRESS TEST BUTTON TO CONTINUE
PRESS TEST BUTTON TO CONTINUE
FIG. 9. 3 h c BOOKKEEPING (4 - 9/12) Screen
41
www.seuservice.com
(3) Detailed data of each course
Allows for checking the detailed data of each course; NOVICE, INTERMEDIATE and EXPERT. It's
a total of 3 screens on each course 1 screen.
2nd line of the screen:
Indicates the course name and the total
playing time.
BOOKKEEPING 10/12
NOVICE
1st
2nd
3rd
4th
5th
6th
7th
CHECK1
CHECK2
CHECK3
CHECK4
CHECK5
CHECK6
68
6
0
0
0
0
0
2
8th
9th
10th
11th
12th
13th
14th
1
2
0
0
1
0
56
17
15
11
8
4
2
AVR.
AVR.
AVR.
AVR.
AVR.
AVR.
43S
37S
36S
27S
34S
36S
PRESS TEST BUTTON TO CONTINUE
BOOKKEEPING 11/12
INTERMEDIATE
1st
2nd
3rd
4th
5th
6th
7th
CHECK1
CHECK2
CHECK3
CHECK4
CHECK5
CHECK6
CHECK7
CHECK8
15
0
0
0
0
0
0
1
8th
9th
10th
11th
12th
13th
14th
0
1
1
1
0
1
10
9
7
6
5
4
1
0
0
AVR.
AVR.
AVR.
AVR.
AVR.
AVR.
AVR.
AVR.
34S
27S
27S
26S
20S
27S
0S
0S
PRESS TEST BUTTON TO CONTINUE
BOOKKEEPING 12/12
EXPERT
1st
2nd
3rd
4th
5th
6th
7th
CHECK1
CHECK2
CHECK3
CHECK4
CHECK5
CHECK6
CHECK7
CHECK8
8
1
0
0
0
0
0
0
8th
9th
10th
11th
12th
13th
14th
1
0
0
1
0
0
5
5
5
4
4
3
1
0
0
AVR.
AVR.
AVR.
AVR.
AVR.
AVR.
AVR.
AVR.
31S
31S
25S
32S
25S
30S
0S
0S
PRESS TEST BUTTON TO EXIT
FIG. 9. 3 h d BOOKKEEPING (10 - 12/12) Screen
www.seuservice.com
42
1st - 14th:
Indicates the ranking at the play end
time. (It's not whether the game was
cleared or not.)
CHECK 1-6 or 8:
Indicates the number of players, which
arrived at each check-point.
AVR:
Indicates the average time of each
checkpoint section.
BACKUP DATA CLEAR
Clears the contents of BOOKKEEPING. When clearing the data, use the SERVICE Button to
bring the arrow to "YES (CLEAR)" and press the TEST Button. When clearing is finished, "COMPLETED" is displayed. Press the TEST Button again to return to the Game Test Menu screen. Bring
the arrow to "NO (CANCEL)" and press the TEST Button to have the Game Test Menu screen return
on the screen without clearing the data. Note that this operation does not affect the contents of the
game setting.
BACKUP DATA CLEAR
YES(CLEAR)
> NO (CANCEL)
SELECT WITH SERVICE BUTTON
AND PRESS TEST BUTTON
FIG. 9. 3 h c BACKUP DATA CLEAR Screen
43
www.seuservice.com
10. COIN SELECTOR
HANDLING THE COIN JAM
If the coin is not rejected when the REJECT button is pressed, open the coin chute door and open the
selector gate. After removing the jammed coin, put a normal coin in and check to see that the selector
correctly functions.
CLEANING THE COIN SELECTOR
STOP
IMPORTANT!
GATE
Remove and clean smears by using a soft
cloth dipped in water or diluted chemical
detergent and then squeezed dry.
Never apply machine oil, etc. to the Coin
Selector.
After cleaning the Coin Selector, insert a
regular coin in the normal working status
and ensure that the Selector correctly functions.
FIG. 13 a
The coin selector should be cleaned once every 3 months.
When cleaning, follow the procedure below:
1 Turn the power for the machine OFF. Open the
2
3
4
5
6
7
coin chute door.
Remove the coin selector from the coin chute door.
Open the gate and dust off by using a soft brush
(made of wool, etc.).
Remove and clean smears by using a soft cloth
dipped in water or diluted chemical detergent and
then squeezed dry.
Remove the CRADLE.
When removing the retaining ring (E ring), be very
careful so as not to bend the rotary shaft.
Remove stain from the rotary shaft and shaft
receiving portions by wiping off with a soft cloth,
etc.
After wiping off as per 5 above, further apply
a dry cloth, etc. to cause the coin selector to dry
completely.
COIN INSERTION TEST
Once every month, when performing the
Coin SW Test, simultaneously check the
following:
FIG. 13 b
Insert a coin
while
keeping the Reject
Button pressed
down and check
if it is rejected.
Does the Coin Meter count satisfactorily?
Does the coin drop into the Cashbox correctly?
Is the coin rejected when inserted while keeping the
Reject Button pressed down?
www.seuservice.com
CRADLE
44
COIN METER
FIG. 13 c
COIN DOOR
45
www.seuservice.com
11. MONITOR
15-1 CAUTIONS AND WARNINGS CONCERNING THE SAFETY FOR HANDLING THE MONITORS
Before handling the monitors, be sure to read the following explanations and comply with the
caution/warning instructions given below. Note that the caution/warning symbol marks and letters
are used in the instructions.
WARNING!
Indicates that handling the monitors
erroneously by disregarding this warning
may cause a potentially hazardous situation,
which could result in death or serious injury.
CAUTION!
Indicates that access to a specific part of the
equipment is forbidden.
WARNING!
WARNING!
Indicates that handling the monitors by
disregarding this caution may cause a
potentially hazardous situation, which could
result in personal injury and or material
damage.
Indicates the instruction to disconnect a power
connector or to unplug.
When performing such work as installing and removing the monitor, inserting and disconnecting
the external connectors to and from monitor interior and the monitor, be sure to disconnect the
power connector (plug) before starting the work. Proceeding the work without following this
instruction can cause electric shock or malfunctioning.
Using the monitor by converting it without obtaining a prior permission is not allowed. SEGA
shall not be liable for any malfunctioning and accident caused by said conversion.
Primary side and Secondary side
The monitor's circuit which is divided into the Primary side
SECONDARY SIDE
(Chassis, CRT)
and Secondary side, is electrically isolated. Do not touch
the primary side, or do not touch both the primary side
and the secondary side simultaneously. Failing to observe
PRIMARY
SIDE
the instruction can cause electric shock and this is very
dangerous. When making monitor adjustments, use a nonconductive driver and make adjustment without touching
any part other than the Adjustment V. R. and knob. Also,
be sure not to cause a short-circuit to the Primary side and
Secondary side. If short-circuited, it can cause electric
shock or malfunctioning, which is very dangerous.
High-tension Voltage
Some of the parts inside monitor are subject to high-tension voltage in excess of 20,000 volts and
very dangerous. Therefore, do not touch the monitor interior. Should soldering & paper wastes,
etc. be mixed in the monitor interior, turn the power off so as not to cause malfunctioning or fire
hazard.
ANODE CAP
PRIMARY SIDE
ANODE LEAD
Approx. 29 kV
DEMAGNETIZER
COIL
DEMAGNETIZER COIL REAR PART
MAIN BD
FOCUS LEAD
(black)
Approx. 10 kV
NECK PCB
Approx.
10 kV
SECONDARY SIDE
(Chassis, sheet metal work, CRT, etc.)
Disconnect or unplug
FBT Approx.
29 kV
Connecting the CRT and PCB
For combining the CRT and PCB, use the specified part No. to maintain the status of adjustments
made at the factory. The anode of the CRT itself will be accumulatively charged as time elapses,
generating high-tension voltage which is very dangerous. The monitor should be used with the
Chassis, CRT and PCB assembled. When repair, etc. is required at the time of malfunctioning, be
sure to send it in an "as is assembled" condition. If these are disassembled, what's charged to said
high tension voltage can be discharged, causing a very hazardous situation. Therefore, under no
circumstances should it be disassembled.
CAUTION!
Static Electricity
Touching the CRT surface sometimes causes you to slightly feel electricity. This is because the
CRT surfaces are subject to static and will not adversely affect the human body.
Installation and removal
Ensure that the Magnetizer Coil, FBT (Fly-Back Transformer), Anode Lead and Focus Lead are
not positioned close to the sheet metal work's sharp edges, etc. and avoid damaging the insulated
portions so as not to cause electric shock and malfunctioning. (For the name of parts, refer to the
above Figures).
www.seuservice.com
46
For the purpose of static prevention, special coating is applied to the CRT face
of this product. To protect the coating, pay attention to the following points.
Damaging the coating film can cause electric shock to the customers.
Do not apply or rub with
a hard item (a rod with
pointed edge, pen, etc.) to
or on the CRT surfaces.
Avoid applying stickers,
seals, etc. on the CRT face.
Aluminum Foil
Do not remove aluminum
foils from the CRT corners.
Removing the aluminum
foils can cause static
prevention effects to be
lowered.
15-2 CLEANING THE CRT SURFACES
Static preventive coating is applied to the CRT surfaces. When cleaning, pay
attention to the following points. Peeling off of static preventive coat can cause
electric shock.
Remove smears by using a dry, soft cloth (flannels, etc.). Do not use a coarse
gauze, etc.
For smear removing solvent, alcohol (ethanol) is recommended. When using
chemical detergent, be sure to follow instructions below:
• Dilute chemical detergent with water and dip a soft cloth in and then thoroughly wring it to wipe smears off.
• Do not use a chemical detergent containing an abradant, powder or bleaching
agent.
• Do not use alkaline chemical detergents such as "glass cleaner" available on
the market or solvents such as thinner, etc.
Do not rub or scratch the CRT face with hard items such as brushes, scrub
brush, etc.
Clean the CRT surfaces once a week. When cleaning, pay attention to the above caution so that
the antistatic coating will not come off.
47
www.seuservice.com
12. PERIODIC INSPECTION TABLE
The Air Compressor employed in this product drives the Ride during game. The items listed below
require periodic check and maintenance to retain the performance of this machine and to ensure safe
business operation.
Be sure to check once a year to see if Power Cords are damaged, the plug is
securely inserted, dust is accumulated between the Socket Outlet and the Power
Plug, etc. Using the product with dust as is accumulated can cause a fire or electric
shock.
Periodically once a year, request the place of contact herein stated or the
Distributor, etc. where the product was purchased from, as regards the interior
cleaning. Using the product with dust as is accumulated in the interior without
cleaning can cause a fire or accident. Note that cleaning the interior parts can be
performed on a pay-basis.
WARNING!
TABLE 16
ITEMS
DESCRIPTION
PERIOD
CABINET
Check LEG ADJUSTER adjustments.
Daily
3
HANDLE MECHA
Check VOLUME VALUE.
Monthly
9
Greasing of GEAR and bearing.
COIN CHUTE
TOWER
Tri-monthly
REFERENCE
12
Check COIN SWes.
Monthly
9
Coin insertion test.
Monthly
13
Tri-monthly
13
Cleaning of COIN SELECTOR.
POWER SUPPLY PLUG
Inspection and cleaning
INTERIOR
Cleaning
CABINET
Cleaning
Annually
See above.
As necessary.
CLEANING THE CABINET SURFACES
When the cabinet surfaces are badly soiled, remove stains with a soft cloth dipped in water or diluted
(with water) chemical detergent and squeezed dry. To avoid damaging surface finish, do not use such
solvents as thinner, benzine, etc. other than ethyl alcohol, or abrasives, bleaching agent and chemical
dustcloth.
www.seuservice.com
48
13. TROUBLESHOOTING
17 - 1 TROUBLESHOOTING
In order to prevent electric shock and short circuit, be sure to turn power off before
performing work.
Be careful so as not to damage wirings. Damaged wiring can cause electric shock
or short circuit.
After removing the cause of the functioning of the Circuit Protector, reinstate the
Circuit Protector. Depending on the cause of the functioning, using the Circuit
Protector as is without removing the cause can cause generation of heat and fire
hazard.
WARNING!
In case a problem occurs, first check wiring connector connections.
TABLE 17 a
PROBLEMS
When the main SW is
turned ON, the machine
is not activated.
Sound is not emitted.
CAUSE
COUNTERMEASURES
The power is not ON.
Firmly insert the plug into the outlet.
Incorrect power source/voltage.
Make sure that the power supply/voltage are correct.
The CIRCUIT PROTECTOR
functioned due to momentary
overcurrent.
After eliminating the cause of overload, have the Circuit
Protector of the AC Unit restored.
The fuse of the connect board
was blown out due to momentary
overcurrent.
After eliminating the cause of overload, replace the
specified rating fuse (514-5036-7000, FUSE 6.4 ø X 30
7000mA 125V).
Sound volume adjustment is not
correct.
Adjust the SWITCH UNIT's sound adjustment volume
control.
Malfunctioning BD. and Amp.
Perform SOUND TEST. (NAOMI Service Manual)
49
www.seuservice.com
TABLE 17 b
PROBLEMS
CAUSE
COUNTERMEASURES
During game, the Ride
does not turn when the
Handlebars are turned.
Deviation of Handle Volume.
Adjust the Volume value in the test mode.
Malfunctioning of Handle Volume.
Replace the Volume.
When gripping the Throttle
Lever, the Ride does not
advance.
Deviation of Throttle Volume.
Adjust Volume values in the Test mode.
Communication play not
possible.
Fluorescent lamp doesn't
light up.
www.seuservice.com
Malfunctioning of Throttle Volume.
Communication cable connection is
incorrect.
Replace the Volume.
Connect the communication cables correctly.
Communication settings are wrong.
Correct the settings.
Connector connection fault.
Check connector connections to the Marquee
.
Fluorescent lamp need replacement.
Replace the fluorescent lamp.
50
17 - 2 ERROR MESSAGE
WARNING!
This work should be performed by the Location's Maintenance Man or Serviceman.
Performing work by non-technical personnel can cause accidents.
Should any errors other than listed by this manual or by NAOMI Service Manual
occur, contact where the product was purchased from or an office described in this
manual. Failing to comply with this instruction can cause accidents.
This product displays the error on the screen if the faulty is detected. If an error is displayed, be sure
to take action against it according to the appropriate cause and countermeasures listed below.
It may be displayed the error other than listed by this manual or by NAOMI Service Manual. In that
case, contact where the product was purchased from or an office described in this manual without
operating it selfishly.
DISPLAY
CAUSE
COUNTERMEASURES
NETWORK ERROR: NO MASTER SITE
No MASTER setting in Communication Mode.
Perform the Communication Mode setting in the Game Assignments. Set
one of the machines to MASTER and all others to SLAVE.
DISPLAY
CAUSE
COUNTERMEASURES
NETWORK ERROR: DUPLICATE MASTER SITE
MASTER setting is duplicated in Communication Mode.
Perform the Communication Mode setting in the Game Assignments. Set
one of the machines to MASTER and all others to SLAVE.
DISPLAY
CAUSE
COUNTERMEASURES
NETWORK ERROR: NO SLAVE SITE
No SLAVE setting in Communication Mode.
Perform the Communication Mode setting in the Game Assignments. Set
one of the machines to MASTER and all others to SLAVE.
DISPLAY
CAUSE
COUNTERMEASURES
NETWORK ERROR: TOO MANY NODES SITE
Too many machines are connected.
Up to 4 machines can be connected to allow to enjoy communication
play.
DISPLAY
CAUSE
COUNTERMEASURES
NETWORK ERROR: DUPLICATE CABINET ID
The number of Cabinet ID is duplicated in Communication Mode.
Change the number of Cabinet ID for every seat in the Game Assignments.
DISPLAY
CAUSE
COUNTERMEASURES
DRIVE BD ERROR: E2H
Connection to Eliminator board is bad.
Check Connections from Eliminator board to Drive Board.
51
www.seuservice.com
DISPLAY
CAUSE
COUNTERMEASURES
DRIVE BD ERROR: E3H
Connection to Eliminator board is bad.
Check Connections from Eliminator board to Drive Board.
DISPLAY
CAUSE
COUNTERMEASURES
DRIVE BD ERROR: E4H
Connection to Eliminator board is bad.
Check Connections from Eliminator board to Drive Board.
DISPLAY
CAUSE
COUNTERMEASURES
DRIVE BD ERROR: E7H
Connection to Eliminator board is bad.
Check Connections from Eliminator board to Drive Board
DISPLAY
CAUSE
COUNTERMEASURES
NO DRIVE BOARD
Connection to Eliminator board is bad.
Check Connections from Eliminator board to Drive Board.
www.seuservice.com
52
14. GAME BOARD
WARNING!
CAUTION!
STOP
IMPORTANT!
In order to prevent electric shock and short circuit hazards, be sure to turn power
off before performing work.
Be careful so as not to damage wirings. Damaged wiring can cause fire, electric
shock and short circuit hazards.
Do not expose the Game BD, etc. without a good reason. Failure to observe this
can cause electric shock hazard or malfunctioning.
To perform work safely and securely, be sure to use 2 or more workers.
The electronic parts on the IC Board could be damaged due to human body's static
electricity. Before performing IC Board related work, be sure to discharge physically
accumulated statics by touching grounded metallic surfaces, etc.
Put the Game Board in the Carton Box (an accessory) together with the Shield Case
when requesting for the replacement or repair. Transporting the Game Board in an
undesignated status for replacement/repair is unacceptable.
In this manual, how to remove the Game Board is explained for convenience. However, this work should be performed by SEGA SERVICEMAN.
53
www.seuservice.com
18 - 2 COMPOSITION OF GAME BOARD
STOP
Ensure that the DIP SW setting is performed as designated. Failure to observe this
may cause functioning not suitable for the actual operation, or malfunctioning.
IMPORTANT!
ASSY CASE NAO WRG USA (840-0064D-06) : USA
SCREW (4)
M3 X 50,chrome plated
ROM CASE NAO WRG
840-0064C
ASSY CASE NAO
COMMUNICATION BD
840-0001E
DIP SW
ASSY CASE NAOMI MAIN BD USA:840-0001A-06
FIG. 18. 2 a
DIP SW SETTING
In this product, set all of the DIP Switches to OFF.
FIG. 18. 2 b
www.seuservice.com
54
15. DESIGN RELATED PARTS
999-1872
Marquee
999-1873
Decal Cab Side Left WRGP
999-1874
Decal Cab Side Right WRGP
999-1879
Decal Accelerator WRGP
999-1877
Decal Inst Left WRGP
999-1878
Decal Inst Right WRGP
999-1875
Decal Cab Side Left WRGP
999-1876
Decal Cab Side Right WRGP
55
www.seuservice.com
20. COMMUNICATION PLAY
For this game, up to 4 machines can be connected to allow up to 4 players to play simultaneously.
In this instance, connecting the communication cable and setting for the communication play are
required.
20 - 1 INSTALLATION PRECAUTIONS
WARNING!
Before starting to work, ensure that the Power SW is OFF. Failure to observe this
can cause electric shock or short circuit.
Use care so as not to damage wirings. Damaged wiring can cause electric shock or
short circuit.
Do not touch undesignated places. Touching places not designated can cause
electric shock or short circuit.
This work should be performed by the Location's Maintenance Man or Serviceman.
Performing work by non-technical personnel can cause electric shock hazard.
When linking a number of machines, be sure to supply sufficient power for the
corresponding number of machines. Be sure to secure per machine current as
stated in this manual. Failure to observe this can cause a fire and an electric shock
accident.
Due to the length of the communication cable, the distance in between the machines
is limited. However, to avoid accidents, be sure to secure space in excess of 2 ft
between the machines.
To perform work safely and avoid serious accident such as the cabinet's falling
down, do not perform work in places where step-like grade differences, a ditch, or
slope exist.
To perform work safely, be sure to secure the space corresponding to number of
machines to be linked. Failure to observe this can cause accident.
CAUTION!
STOP
IMPORTANT!
The optic fiber cable is used for the communication linkage.
Excessive bending may damage the communication cable. Be very careful in this
regard.
Since 2 or more machines are to be linked, sufficient power corresponding to the number of machines
used need to be supplied. Note that as a standard, the per machine capacity should be 15A for the 100
~ 120V area, and 8A for the 220 ~ 240V area.
www.seuservice.com
56
Note: Actual Unit does not look like Image.
DISTANCE BETWEEN MACHINES
24 inches
Be sure to secure space in excess of
2ft between machines.
FIG. 20. 1
20 - 2 CONNECTING THE COMMUNICATION CABLE
To enable the game machines to serve in a communication play, you must interconnect their game
boards with the communication cables (optical fiber cables).
1 Connect the communication cable to each game
Note: Photo Differs from actual Unit.
board. Pass the communication cable through
the round hole on the side of the Front Cabinet
and connect to the game board connectors. A
connecting method varies depending on the
number of the interconnected game machines
(see Fig. 20.2b).
Always connect the red connector to RX and
the black connector to TX, and thereby make a
loop of the communication cable.
Connect the communication cable.
PHOTO 20. 2 c
57
www.seuservice.com
2P LINK
3P LINK
4P LINK
FIG. 20. 2 b Connecting method of the communication cable
Note: Actual Units differ from Image.
9 Arrange the interconnected game machines. Keep a space between the game machines as wide as
possible.
10 Make the adjusters of all the game machines come into contact with the floor.
Connect the power cords and the earth wires.
11
www.seuservice.com
58
20 - 3 SETTING FOR COMMUNICATION PLAY
Change the game setting for each seat in manner so as to meet communication play. If the setting is
not correct, communication play cannot be played.
SETTING FOR COMMUNICATION PLAY
1 Turn the linked machines' power on.
2 Cause all of the machines to enter the test mode (see Section 9).
3
Select the GAME ASSIGNMENTS (see 9-3 d).
GAME ASSIGNMENTS
GAME DIFFICULTY
COMMUNICATION MODE
HANDICAP
CABINET ID
NORMAL
NO LINK
ON
1
If it is set to SLAVE,
GAME DIFFICULTY and
HANDICAP are disappeared
on the screen.
> EXIT
SELECT WITH SERVICE BUTTON
AND PRESS TEST BUTTON
FIG. 20. 3 GAME ASSIGNMENTS Screen
4 Perform the COMMUNICATION MODE setting in the GAME ASSIGNMENTS screen. Set one of
the machines to MASTER and all others to SLAVE.
5 Perform the CABINET ID setting in the GAME ASSIGNMENTS screen. Set the machines to 1, 2,
3 and 4 sequentially in order starting from the leftmost machine facing the screen. Set every number
correctly without duplicating.
6 Cause all of the machines to exit from the test mode by selecting EXIT in the System Test Menu.
7 Exiting from the test mode causes the unit to perform the network check automatically. The Network
Check screen appears on the screen.
8 When finishing the network check successfully, the Advertise Screen appears. Normally the
network check finishes within several 10 seconds. If the screen does not proceed from the Network
Check screen, some sorts of errors such as the error of the setup, the error of cable connection, and
malfunctioning the communication cables, etc. can be considered.
59
www.seuservice.com
20 - 4 CAUTIONS TO BE HEEDED DURING COMMUNICATION PLAY
STOP
IMPORTANT!
During communication play, if communication is interrupted due to some cause, the
game is discontinued and the Network Check screen is displayed.
If one of the linked machines enters the Test Mode, all others display the Network
Check screen.
Even if it has set to the communication play, you can setup a different charge for
every machine.
A wrong charge setup may cause the problems of income and outgo.
Machine's operation when linked for communication play alters comparing to that of when
independently operated. Be careful of this point.
When any game machine is in a Test Mode, a Network Check screen appears on the other
game machines interconnected for a communication play. While a guest is using any one of the
interconnected game machines, therefore, do not activate a Test Mode even on the unused game
machine.
www.seuservice.com
60
17. Parts
1
8
2
3
7
4
10
9
Item #
1
2
3
4
5
6
7
8
9
10
Part #
999-1868
999-1859
999-1867
999-1871
999-1863
999-1864
999-1866
Local Purchase
999-0167
999-1900
6
5
Description
Marquee Plex Clear
Speaker 25W RMS 50W Peak 4Ohm
Monitor Bezel
Seat Small Hard Blue
Floor Mat Back Section
Floor Mat Front L or R
Control Panel Cover Yellow
18” CoolWhite Fluorescent 15W
Leg Leveler
Rear Wheels
61
Notes
Goes over Syrine Marquee
GR# A056-354-000
www.seuservice.com
4
1
2
Item #
1
2
4
Part #
999-1889
999-1860
Description
Coin Meter
1/4in shaft 450-2023 Mouser
Notes
0053-013-102
999-1889
Coin Meter
0053-013-102
www.seuservice.com
62
8
7
1
6
2
3
5
4
Item #
1
2
3
4
5
6
7
8
Part #
998-0195
838-12801
998-0190
998-0194
838-13616
400-5397-01
840-0064D-06
837-13844-02
Description
Notes
Eliminator Board
Drive BD WaveRunner
Transformer 36 VCT @ 3.6A/A41-130-36
Line filter GA Yun Pen YK06T1
Audio Power Amp 2CH
SW REGU for JVS VA
Assy Case Nao Wrg Std USA
I/O Control BD 2 W/O 232C Dog
63
www.seuservice.com
2
13
1
3
14 15
12
16
4
17
5
6
18
24
19 22 23
8
7
20
9
21
10
11
Item #
1
2
3
4
5
6
7
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
Part#
999-1861
999-1880
999-1862
999-1881
999-1882
999-1883
999-1884
999-1885
999-1886
999-1887
998-0196
999-1889
999-1892
999-1896
999-1898
999-1890
999-1895
999-1891
999-1888
999-1893
999-1897
999-1894
www.seuservice.com
Description
Start Button
Handle Cover
View Button
Handle Bar Bracket
Handle Bar
Handle Grips
Handle Shaft Bearing
Handle Shaft
Handle Stopper
Handle Assembly Body
Accel Harness
Accel Pot Bracket
Accel Pot Gear
Accel Pot
Accel Lever
Accel Lever Bracket
Accel Spring
Steering Pot Bracket
Handle Assembly Body Lower
Handle Shaft Gear
Steering Pot
Steering Pot Gear
64
Notes
22. WIRE COLOR CODE TABLE
THE WIRE COLOR CODE is as follow:
A
B
C
D
E
PINK
SKY BLUE
BROWN
PURPLE
LIGHT GREEN
Wires other than those of any of the above 5 single colors will be displayed by 2 alphanumeric
characters.
1
2
3
4
5
7
8
9
RED
BLUE
YELLOW
GREEN
WHITE
ORANGE
BLACK
GRAY
If the right-hand side numeral of the code is 0, then the wire will be of a single color shown by
the left-hand side numeral (see the above).
Note 1: If the right-hand side alphanumeric is not 0, that particular wire has a spiral color code.
The left-hand side character shows the base color and the right-hand side one, the spiral
color.
51. . . . . . . . . . . . .WHITE / RED
RED
WHITE
Note 2: The character following the wire color code indicates the size of the wire.
U:
K:
L:
None:
AWG16
AWG18
AWG20
AWG22
65
www.seuservice.com
Notes:
www.seuservice.com
66
Warranty
Your new Sega Product is covered for a period of 90 days from the date of shipment. This certifies
that the Printed Circuit Boards, Power Supplies and Monitor are to be free of defects in workmanship or materials under normal operating conditions. This also certifies that all Interactive Control
Assemblies are to be free from defects in workmanship and materials under normal operating conditions. No other product in this machine is hereby covered.
Sellers sole liability in the event a warranted part described above fails shall be, at its option, to replace or repair the defective part during the warranty period. For Warranty claims, contact your Sega
Distributor.
Should the Seller determine, by inspection that the product was caused by Accident, Misuse, Neglect, Alteration, Improper Repair, Installation or Testing, the warranty offered will be null and void.
Under no circumstances is the Seller responsible for any loss of profits, loss of use, or other damages.
This shall be the exclusive written Warranty of the original purchaser expressed in lieu of all other
warranties expressed or implied. Under no circumstance shall it extend beyond the period of time
listed above.
SEGA AMUSEMENTS USA, INC.
420-WRGCVT-UK
REV 0
ADDENDUM TO SEGA WAVERUNNER GP STD MANUAL
This document is an addendum to the Sega WaveRunner GP STD Version USA Owner’s
Manual. It details the differences between the standard USA and European builds of the SEGA
WaveRunner unit. The Bill Of Materials lists the items that were changed, and the photographs
illustrate where the items are located on the unit.
Bill Of Materials for WRG-CVT-PROD
Seq.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
201
202
203
204
401
Part Number
WH 100VAC A
WH AC IN
WH 100VAC B
WH EXCEL I/F
WH AUDIO POWER
XFMR NOB
CONN BRD W/FUSE 6.3A
FILTER IEC & SW 6A
ASSY FL18W 110V
CREDIT BOARD EXCEL
SR3 STD BODYSR3INGBB00050
DOOR ASSY 40E-0512-00M
AC BRKT WRG
XFMR BASE WRG
FL TUBE 18W 600L
WH FL NOB
WH METER LINK
M4X12 W/FS PAS
4X1 S/TAP PAN PAS
M4X16 BLK WASHER
NO.6X5/8 S/TAP PAN PAS
420-WRGCVT-UK
Description
WH 100VAC A
WH AC IN
WH 100VAC B
WH EXCEL I/F
WH AUDIO POWER
XFMR NOB
CONN BRD W/FUSE 6.3A
FILTER IEC & SW 6A
ASSY FL18W 110V
CREDIT BOARD EXCEL
SR3 STD BODYSR3INGBB00050
DOOR ASSY 40E-0512-00M
AC BRKT WRG
XFMR BASE WRG
FL TUBE 18W 600L
WH FL NOB
WH METER LINK
M4X12 W/FS PAS
4X1 S/TAP PAN PAS
M4X16 BLK WASHER
NO.6X5/8 S/TAP PAN PAS
ADDENDUM WAVERUNNER CONV UK
Qty
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
4
5
3
4
1
Mains In Power Supply
6, 14
7
ADDENDUM WAVERUNNER CONV UK
-1-
20 OCT 2003
420-WRGCVT-UK
REV 0
ADDENDUM TO SEGA WAVERUNNER GP STD MANUAL
AC Bracket
8
Fluorescent Light
13
9
Coin Handling
12
10
4
Not Shown SR3 Coin Mech.
ADDENDUM WAVERUNNER CONV UK
-2-
20 OCT 2003
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes XMP Toolkit : Adobe XMP Core 4.0-c321 44.398116, Tue Aug 04 2009 14:24:30 Modify Date : 2012:02:27 12:26:19Z Create Date : 2012:02:27 12:26:19Z Metadata Date : 2012:02:27 12:26:19Z Creator Tool : Adobe Acrobat 8.3 Combine Files Format : application/pdf Title : Cover Document ID : uuid:2c34aeb7-3418-9e43-ba00-b66af01e9384 Instance ID : uuid:f9c2ff13-ba85-8945-a788-4273530522e4 Producer : Adobe Acrobat 8.3 Page Count : 79 Creator : Adobe Acrobat 8.3 Combine FilesEXIF Metadata provided by EXIF.tools