Arcade Zoofari Manual Service (ICE) 11 02 07 User

2013-11-28

User Manual: Arcade Zoofari Manual

Open the PDF directly: View PDF .
Page Count: 22

Download
Open PDF In Browser	View PDF

OWNERS AND SERVICE MANUAL
INNOVATIVE CONCEPTS IN ENTERTAINMENT INC.

TABLE OF CONTENTS
SAFETY & WARNINGS…………….……….…………..…..PAGE 3
•
•
•

BEFORE YOU BEGIN
INSTALLATION
WARNING

GAME SETUP & FEATURES....…………….……………....PAGE 4 - 5
•
•
•

PLAYER CONTROLS
PLAYING THE GAME
INITIAL GAME SETUP

DIAGNOSTIC, ADJUSTMENT & AUDIT MENU SYSTEM…...PAGE 6 - 12
•
•
•
•
•
•
•
•
•
•
•
•

MENU SYSTEM
STARTING THE MENU SYSTEM
NAVIGATING THE MENU
MAIN MENU
VIEW COIN AUDITS
VIEW TICKET AUDITS
VIEW SYSTEM AUDITS
COINAGE ADJUSTMENTS
TICKET ADJUSTMENTS
SYSTEM ADJUSTMENTS
GAME ADJUSTMENTS
RESET MENU

TROUBLESHOOTING...……………………………………….....PAGE 13 - 14
MAINTENANCE……………………………………………….…..PAGE 15 - 18
•
•
•

CLEANING GLASS & MONITOR
REPLACING MARQUEE LIGHT BULB
GUN REPAIR

PARTS LISTING………………………………………………......PAGE 19
SCHEMATICS……………………………………………………..PAGE 20
JAMMA CONNECTOR PINOUT CHART……………………....PAGE 21

ICEDOC FZ9001
REVISION C

11-02-07

SAFETY AND WARNINGS
BEFORE YOU BEGIN
WARNING: WHEN INSTALLING THIS GAME, A GROUNDED A.C. RECEPTACLE MUST BE USED. FAILURE
TO DO SO COULD RESULT IN INJURY TO YOURSELF OR OTHERS. FAILURE TO USE A GROUNDED RECEPTACLE COULD ALSO CAUSE IMPROPER GAME OPERATION, OR DAMAGE TO THE ELECTRONICS.
DO NOT DEFEAT OR REMOVE THE GROUNDING PRONG ON THE POWER CORD FOR THE SAME
REASON AS GIVEN ABOVE. USING AN IMPROPERLY GROUNDED GAME COULD VOID YOUR WARRANTY.
HAVE A QUALIFIED ELECTRICIAN CHECK YOUR A.C. RECEPTACLE TO BE SURE THE GROUND IS
FUNCTIONING PROPERLY.

INSTALLATION
The game comes ready to play with just a few simple things to keep in mind.
1. Plug the game into the A.C. outlet and turn on power to the game. The switch for the game is located on a
power module on the outside rear of the game.
THIS GAME IS DESIGNED TO DISSIPATE STATIC ELECTRICITY THROUGH THE GROUNDING PLANE OF THE
GAME. IF THE A.C. GROUND DOES NOT WORK, THE GAME COULD DISCHARGE STATIC ELECTRICITY
THROUGH THE GAME CIRCUITRY, WHICH COULD CAUSE DAMAGE.

2. Make sure the game is level after installation. It is necessary to make sure the game is level for safety
concerns.
3. Check that the A.C. voltage rating on the back of the game matches the A.C. voltage of your location.
THE POWER SUPPLY IS NOT VOLTAGE ADJUSTABLE. TO OPERATE THE GAME AT VOLTAGES OTHER THAN
THOSE IT WAS DESIGNED FOR. PLEASE CONTACT OUR SERVICE DEPARTMENT FOR VOLTAGE CONVERSION
INFORMATION.

WARNING
DO NOT remove any of the components on the main board (e.g. compact flash and eproms) while
the game is powered on. This may cause permanent damage to the parts and the main board. Removing any main board component part while powered on will void the warranty.

NOTE: THIS GAME IS INTENDED FOR INDOOR USE ONLY.
ON THE BACK PANEL OF THE GAME: WARNING: SHOCK HAZARD - DO NOT OPEN. REFER
SERVICING TO SERVICE PERSONNEL.

GAME SETUP AND FEATURES
Player Controls
To begin the game, insert the proper number of credits, and squeeze the Peanut Launcher button. There are
two Peanut Launchers, one for the left player and one for the right player.

Playing the Game
The objective of the game is to feed as many animals as possible within the game time in order to accumulate
points and tickets. Animals appear from all sides of the screen.
There are bonus items such as: red balloons – awards Double Points, blue balloons – awards more time,
Golden Roo – awards additional Bonus Points.

Initial Game Setup
The game is setup at the factory with the recommended factory settings. The following outlines the important
adjustments an operator may adjust during initial game setup. For more detailed instructions on setting these
adjustments, see Chapter 3.

Coins
Set the number of credits required to start the game. Also set the number of credits for each coin inserted in
coin mechanism 1 and coin mechanism 2. These settings are adjusted in the COINAGE ADJUSTMENTS
menu.

Tickets
Setup the points per ticket, minimum tickets paid, maximum tickets paid and ticket threshold. Also, setup
whether tickets should be dispensed while playing or at the end of the game. These settings are adjusted in
the TICKET ADJUSTMENTS menu.

Time Limit
Set the amount of game time for each start. These settings are adjusted in the GAME ADJUSTMENTS menu.

Points Per Ticket
Set the number of points required to earn one ticket.

Control Switches
The control switches are inside the front coin door.

Volume Up
Press the volume up button to increase the volume in the game and the attract mode. Pressing this button
when playing the game will increase the game volume. Pressing this button when the game is in the attract
mode will increase the attract mode volume.

Volume Down
Press the volume down button to decrease the volume in the game and the attract mode. Pressing this button when playing the game will decrease the game volume. Pressing this button when the game is in the attract mode will decrease the attract mode volume.

Diagnostics Button
Press this button to go into the diagnostics MAIN MENU.

Coin Meters
The game has two mechanical meters. The left meter will be incremented by 1 each time a coin is dropped
into the coin mechanisms. The right meter will be incremented by 1 each time a ticket is dispensed.

GAME SETUP AND FEATURES
Game Setup Location
The sizes shown on the diagram below will help you determine the area required for your game, and where you might
want the game to be placed.

DIAGNOSTIC, ADJUSTMENT AND AUDIT MENU SYSTEM
Menu System
The game’s menu system is a series of on screen menus that allow the operator to setup and adjust the settings. Each menu item leads to another menu, a list of data or provides the ability to modify the adjustment.

Starting the Menu System
Press the Diagnostics control switch inside the coin door to access the on screen menu system.

Navigating the Menu
Use the following buttons to navigate the menu system:
Volume Up button to move the cursor up.
Volume Down button to move the cursor down.
Diagnostic button to select.
Once an item has been selected, use the Volume Up/Volume Down button to change the settings. Once an item
has been changed, press the Diagnostic button to save the desired setting.

Main Menu
All system tests, audits and game adjustments are accessible from the MAIN MENU.
Zoofari 01.00.01

Serial #: 00105

MAIN MENU
SYSTEM TESTS MENU
COIN AUDITS
TICKET AUDITS
SYSTEM AUDITS
GAME AUDITS
COINAGE ADJUSTMENTS
TICKET ADJUSTMENTS
SYSTEM ADJUSTMENTS
GAME ADJUSTMENTS
RESET MENU
EXIT
USE VOL UP & VOL DN TO MOVE

TEST TO SELECT

DIAGNOSTIC, ADJUSTMENT AND AUDIT MENU SYSTEM
Main Menu
Select SYSTEMS TEST at the MAIN MENU.
Zoofari 01.00.01

Serial #: 00105

Gun Test & Calibrate - Select GUN TEST &
CALIBRATE to calibrate the gun with the target on
the screen.

SYSTEM TESTS MENU
GUN TEST & CALIBRATE
SWITCH INPUT TEST
VIDEO SCREEN TESTS
SOUND TEST
MAIN MENU

Switch Input Test - Select SWITCH INPUT TEST
to manually test all of the switch inputs. When in
this screen, activate the start button, select button,
test button, volume up, volume down, ticket sensor 1, ticket sensor 2, coin 1, coin 2, game control
pad 1 and game control pad 2 to determine if the
game recognizes input from each.
Video Screen Tests - Select VIDEO SCREEN
TESTS to test the following: Screen Color, Screen
Size, Red Color, Green Color, Blue Color, and
White Color.

USE VOL UP & VOL DN TO MOVE

Zoofari 01.00.01

TEST TO SELECT

Sound Test - Select SOUND TEST to test various
game sounds and songs.

Serial #: 00105

Color Adjustment – Displays multiple colors for
screen color adjustment.

VIDEO SCREEN TESTS

Screen Size Adjustment – Displays grid for
screen size adjustments.

COLOR ADJUSTMENT
RED SCREEN
GREEN SCREEN
BLUE SCREEN
WHITE SCREEN
EXIT

Red Screen – Displays full red for screen color
adjustments.
Green Screen - Displays full green for screen
color adjustments.
Blue Screen - Displays full blue for screen color
adjustments.
White Screen - Displays full white for screen
color adjustments.

USE VOL UP & VOL DN TO MOVE

TEST TO SELECT

DIAGNOSTIC, ADJUSTMENT AND AUDIT MENU SYSTEM
View Coin Audits
Select VIEW COIN AUDITS at the MAIN MENU to view coin data about the game.
Zoofari 01.00.01

Coin 1 – Number of coins inserted in coin
mechanism 1.

Serial #: 00105

COINAGE AUDITS
COIN 1
COIN 2
PAID CREDITS
LIFETIME COIN COUNT
MAIN MENU

Coin 2 – Number of coins inserted in coin
mechanism 2.

0
0
0
0

DBV – Number of bills inserted in DBV mechanism.
Paid Credits – Number of coins inserted in all
coin devices.
Lifetime Coin Count – Number of coins inserted
in all coin devices since the game has been installed. This WILL NOT be reset by CLEAR
COIN COUNTERS or RESTORE FACTORY
SETTINGS from the UTILITIES menu.

USE VOL UP & VOL DN TO MOVE

TEST TO SELECT

View Ticket Audits
Select VIEW TICKET AUDITS at the MAIN MENU to view ticket data about the game.

Zoofari 01.00.01

Serial #: 00105

Tickets Won – Total number of tickets won.

TICKET AUDITS
TICKETS WON
AVERAGE TIX
TIX DISPENSED 1
TIX DISPENSED 2
HIGH TICKET
MAIN MENU

USE VOL UP & VOL DN TO MOVE

Average Tix – Average tickets dispensed per
game.

0
0
0
0
0

Tix Dispensed 1 – Total tickets dispensed from
dispenser 1.
Tix Dispensed 2 – Total tickets dispensed from
dispenser 2.
High Ticket – Highest number of tickets won.

TEST TO SELECT

DIAGNOSTIC, ADJUSTMENT AND AUDIT MENU SYSTEM
View System Audits
Select VIEW SYSTEM AUDITS at the MAIN MENU to view data about the game.
Zoofari 01.00.01

Up Time H:M:S - Total up time. Reported in
Hours, Minutes and Seconds.

Serial #: 00105

SYSTEM AUDITS
UP TIME
PLAY TIME
PLAYER 1 STARTS
PLAYER 2 STARTS
MAIN MENU

USE VOL UP & VOL DN TO MOVE

0Y 0D 00:00:00
0Y 0D 00:00:00
0
0

Play Time H:M:S - Total up time. Reported in
Hours, Minutes and Seconds.
Player 1 Starts – Number of starts for Player 1.
Player 2 Starts – Number of starts for Player 2.

TEST TO SELECT

View Game Audits
Select VIEW GAME AUDITS at the MAIN MENU to view import data about the game.
NOTE: All Game Audits will be reset if you RESET AUDITS or RESTORE FACTORY SETTINGS from the
UTILITIES menu.

Zoofari 01.00.01

Average Score – Average score per game
played. Use this setting to help determine ticket
settings from the TICKET UTILITIES menu.

Serial #: 00105

GAME AUDITS
AVERAGE SCORE
HIGH SCORE
MAIN MENU

USE VOL UP & VOL DN TO MOVE

0.00
0

High Score – Highest Score achieved.

TEST TO SELECT

DIAGNOSTIC, ADJUSTMENT AND AUDIT MENU SYSTEM
Coinage Adjustments
Select COINAGE ADJUSTMENTS at the MAIN MENU. Modify these coinage adjustments to change the
price of the game.
Zoofari 01.00.01

Coin Slot 1 Units – Set the number of credits
received when a coin or token is inserted in coin
mechanism 1. Set from 1 – 20 or “Off”.

Serial #: 00105

COINAGE ADJUSTMENTS
COIN SLOT 1 UNITS
COIN SLOT 2 UNITS
CREDITS TO START
MAXIMUM CREDITS
FREE PLAY
COMMON COIN/TIX METERS
MAIN MENU

1
1
1
OFF
OFF
OFF

Coin Slot 2 Units – Set the number of credits
received when a coin or token is inserted in coin
mechanism 2. Set from 1 – 20 or “Off”.
Credits to Start – Set the number of credits required to start a game. Set from 1 – 10.
Maximum Credits - Set the maximum of credits
allowed. Set from 1 - 99 or “Off”.
Free Play – If set to ‘Yes’ the game is set on free
play and no coins or credits will be required to
play.

USE VOL UP & VOL DN TO MOVE

TEST TO SELECT

Common Coin / Tix Meters – Set to “On” to
share meters, “Off” to use both meters.

Ticket Adjustments
Select TICKET ADJUSTMENTS at the MAIN MENU. Modify these ticket adjustments to change the number
of tickets dispensed by the game.

Zoofari 01.00.01

Tickets Dispenser – This setting turns the ticket
dispenser on or off.

Serial #: 00105

TICKET ADJUSTMENTS
TICKET DISPENSER
TICKET MINIMUM
TICKET MAXIMUM
IDEAL PAYOUT
DISPENSE WHILE PLAYING
MAIN MENU

ON
1
OFF
10
ON

Tickets Minimum – This setting determines the
minimum number of tickets to be dispensed for
each game played. Set from 1 – 10. If the game
does not have a ticket dispenser, set to 0.
Tickets Maximum – This setting determines the
maximum number of tickets to be dispensed for
each game played. Set from 1 – 100 or “Off”. If
the game does not have a ticket dispenser, set to
0.
Ideal Payout - This setting determines the ideal
ticket payout per game. Set from 0 - 100 or “Off”.

USE VOL UP & VOL DN TO MOVE

TEST TO SELECT

Dispense While Playing – Set to ‘Off’ to dispense tickets at the end of each game. Set to
‘On’ to dispense tickets as they are earned during game play.

DIAGNOSTIC, ADJUSTMENT AND AUDIT MENU SYSTEM
System Adjustments
Select SYSTEM ADJUSTMENTS at the MAIN MENU. Modify these values to change the mode and volume
level of the game.
Zoofari 01.00.01

Attract Sound – Set to “On” to have attract
mode play while game is idle. Set to “Off” if no
attract mode is desired. Set to “Occasionally if
attract mode is desired some of the time.

Serial #: 00105

SYSTEM ADJUSTMENTS
ATTRACT SOUND
MINIMUM VOLUME
MAIN MENU

ON
0

Minimum Volume – Minimum volume setting for
the game. Set from 0 – 255. The higher the setting the higher the volume.

Play sounds in attract mode
USE VOL UP & VOL DN TO MOVE

TEST TO SELECT

Game Adjustments
Select GAME ADJUSTMENTS at the MAIN MENU. Modify these game adjustments to change the way the
game functions.
Zoofari 01.00.01

Game Time – Game Time. Minimum time = 1
seconds, Maximum = 60 seconds.

Serial #: 00105

GAME ADJUSTMENTS
GAME TIME
BONUS TIME
MAXIMUM ANIMALS
POINTS PER TICKET
PEANUT STYLE
MAIN MENU

30
10
3
100
ORANGE/GREEN

Bonus Time – Frequency of the Time Bonus
coming out. Set from 1 - 30 seconds.
Maximum Animals - Maximum number of animals on the screen at one time. Set from 1 - 10.
Points Per Ticket - Number of points required to
win one ticket. Set from 10 - 1000.
Peanut Style - Color of peanuts used to feed the
animals. Choose from: ORANGE/GREEN,
BLUE/YELLOW or CLASSIC.

Time is seconds of one play
USE VOL UP & VOL DN TO MOVE

TEST TO SELECT

DIAGNOSTIC, ADJUSTMENT AND AUDIT MENU SYSTEM
Reset Menu
Select RESET MENU at the MAIN MENU. Select these options to reset game audits.
Zoofari 01.00.01

Reset Credits – Resets credits stored in the
game.

Serial #: 00105

RESET MENU
RESET CREDITS
RESET TICKETS
RESET AUDITS
RESET ADJUSTMENTS
FACTORY RESET
MAIN MENU

Reset Tickets – Resets the number of tickets
won.
Reset Audits – Resets all game audits.
Reset Adjustments – Resets all adjustments
made to the game.
Factory Reset – Resets the game to factory defaults.

USE VOL UP & VOL DN TO MOVE

TEST TO SELECT

I.C.E. Parts/Service Dept.
Phone #: (716) - 759 – 0360
Fax #: (716) – 759 – 0884
NORMAL BUSINESS HOURS ARE:
MONDAY - FRIDAY, 9:00 AM TO 6:00 PM EST
12

TROUBLESHOOTING
Troubleshooting
CAUTION
This game uses complex electronic components that are very sensitive to static electricity. Observe precautions below before handling these electronics. Failure to do so may void the warranty and damage electronic
assemblies.
Before servicing electronics, turn off AC power to the game. Wait for capacitors to discharge.
DO NOT remove any of the components on the main board (e.g. compact flash and eproms) while the game is
powered on. This may cause permanent damage to the parts and the main board.
Before touching or handling electronic assemblies, discharge static electricity on your body. To discharge this
static, begin by connecting the line cord to a grounded outlet. Don’t turn on the game. Next, touch the safety
ground stud of the power supply chassis.
Store electronic assemblies in an anti-static area. Use anti-static bags to store or transport the game circuit boards.
Don’t remove or connect electronic assemblies when cabinet power is on. Otherwise, you’ll damage electronic assemblies and void the game’s warranty.
After you complete maintenance or service, replace ground wires, shields, safety covers and install and tighten
ground and mounting screw.
Video game monitors generate and store potentially high voltages. Avoid touching any part of the monitor until
power has been off for some time. A picture tube can maintain a hazardous charge for up to several days. Only
qualified technicians should service monitors.

Game Is Non-Functional
1.

Verify that the game power switch is turned on.

Verify that earth ground is properly connected and all exposed metal points are properly grounded.

Verify that the line cord connector is firmly and correctly seated into the power entry module of AC power chassis.

Verify that correct AC line voltage is present at the outlet

Verify that the JAMMA wire harness connector is firmly and properly seated to the mating JAMMA PCB edge connector. DO NOT remove or install JAMMA connector when power is turned on. Doing so will damage the CPU
assembly and void the warranty.

Verify that the DC power supply voltages at the game CPU assembly are set as follows. The following voltages
should be set when the game CPU assembly is connected and the game is powered on.
+5V:
+4.9V - +5.1V /// +12V: +11.5V - +12.5V //// -5V:-4.75V - -5.25V

Verify that the non-JAMMA connectors are attached at the proper location and are firmly seated.

Verify that the game DIP switches are set properly.

If game sounds can be heard but no picture is seen on the monitor, see monitor is non functional

TROUBLESHOOTING
Monitor Is Non-Functional
1.

Verify the cabinet has AC line voltage present at the monitor and has earth ground connected.

Verify that the video is properly connected from the game boards output to the monitor input.

Verify that the monitor remote adjustment board is properly installed and connected to the monitor chassis. Verify that brightness and contrast are set above their minimum levels.

Check fuses on monitor chassis. Replace fuse or chassis as necessary.

Verify that the game is using a low-res monitor.

Sound Is Non-Functional
1.

Verify the cabinet wiring is correct. Ensure that the speakers are properly connected to the audio wires from
the JAMMA connector.
Verify that the power is providing:
+5V:
+4.9V - +5.1V
+12V: +11.5V - +12.5V
-5V:
-4.75V - -5.25V
Verify that the above listed voltages are present at the correct JAMMA connector pins.

Verify that the game volume has been turned up.

Game Controls Are Non-Functional
1.
2.

Verify that the each individual switch is working by doing the SWITCH INPUT TEST under the SYSTEM
TESTS MENU.
Verify that the each individual signal wire for each switch is connected.

MAINTENANCE / REPAIR

To Clean Glass and Monitor
1.
2.
3.
4.

Remove item no. 2.
Remove item no. 3.
Remove glass (item no. 1)
Assemble in reverse.

ITEM
NO.

PART
NO.

DESCRIPTION

QTY.

FZ3027

GLASS

FZ3032

FRAME TOP

FZ3031

FRAME SIDE

FZ3030

FRAME BOTTOM

6281

1/4-20 X 1” LG. BHCS ZINC

6020

#10 FLAT WASHER ZINC

MAINTENANCE / REPAIR

MOUNTING
NUT

To Replace Light Bulb In Marquee
1.
2.
3.
4.
5.

Remove back panel of cabinet.
Locate above light fixture assembly.
Remove 2 mounting nuts located in above diagram.
Remove assembly and replace bulb.
Assemble in reverse.

ITEM
NO.

PART
NO.

DESCRIPTION

QTY.

FZ3068

PANEL (LIGHT BOARD)

BW250

BULB SOCKET

BW2017

BULB PLASTIC CLIP

BW2018

BULB PLASTIC SUPPORT

8312

BULB PL-L

CS8449X

BALLAST ASSEMBLY

6071

#6 x 1/2 SELF-TAP (BLACK)

6019

#6 DRYWALL SCREW 1"

MAINTENANCE / REPAIR

CUSTOM LENS

ITEM
NO.

PART
NO.

FZ2011

SHOOTER HOUSING (YELLOW)

FZ3010

SHOOTER TUBE

FZ3011

SHOOTER BUTT

FZ3016

SHOOTER POINT

PT2013

LENS (GUN) 96-0068-00

6251

NYLON WASHER

6269

6-32 x 1/4 PEM STUD

FZ1050

6-32 THREADED ROD

640

6-32 x 3/8 HH SPACER (METAL)

6324

6-32 ACORN NUT

FZ7011

DECAL, GUN BARREL

DESCRIPTION

THREAD LOCK

QTY.

A/R

MAINTENANCE /REPAIR

ITEM
NO.

PART
NO.

DESCRIPTION

ITEM
NO.

QTY.

PART
NO.

DESCRIPTION

QTY.

6020

#10 FLAT WASHER ZINC

5008

TICKET DOOR (HAPP)

FZ3031

FRAME SIDE

SPEAKER GRILL

FZ7027F

MARQUEE

6040

10-24 KEP NUT

FZ3071

PEANUT BARREL ASSEMBLY

655

#8 X 3/4” SQ. DRIVE SCREW

6070

1/4 X 1-1/2” X .090 F-WASHER

5001

COIN DOOR SET

6220

1/4-20 X 1 3/4” BSHCS (BLACK)

FZ3050X

CABINET FRONT ASSEMBLY

PC60604

1/4-20 NYLOCK NUT

6281

1/4-20 X 1.5” LG. BHCS ZINC

FZ3032

FRAME TOP

FZ3027

GLASS

FZ3030

FRAME BOTTOM

FG2007

6 X 9 SPEAKER (SHIELDED)

FZ1019

PARTS LISTINGS
Mechanical Parts
211
1024
5001
5008
FZ2011
FZ3000
FZ3001
FZ3010
FZ3027
FZ3037
FZ3071
FZ7027
PT2011X

Low Ticket Switch
Ticket Bin
Coin Door
Ticket Door
Gun - No Recoil - Yellow
Wheel (Back Left)
Wheel (Front)
Shooter Tube
Monitor Glass
Wheel (Back Right)
Barrel & End Cap Assembly
Marquee
Gun - No Recoil - Blue

Electrical Parts
8312
8716
CS8449X
DD2364X
FG2007
MON29CF
RN2034FZX
WA2010

PL-L Bulb
Flash Card - Compact
Ballast (WH-3)
Fan
Speaker 6” X 9”
Monitor – 29” Flat Screen
PCB (Main)
Power Supply

Graphics and Decals
FZ7000
FX7001
FZ7002
FZ7003
FZ7004
FZ7005
FZ7006
FZ7008
FZ7009
FZ7010
FZ7013
FZ7024
FZ7025
FZ7026

Decal - Gorilla Side
Decal - Cartouche
Decal - Side (Feed The Animals…..)
Decal - Cabinet Front
Decal - Wheels
Decal - Monitor Bezel
Decal - Side (Lower Strip)
Decal - Monitor Peanuts
Decal - Barrel
Decal - Barrel Peanuts
Decal - Instructions
Decal - ICE Logo
Decal - Giraffe Head - Front
Decal - Giraffe Head - Rear

TICKET
DISPENSER
#1

PEANUT
SHOOTER 2

violet/blue
black*2
violet/white
orange*2

1
2
3
4

white/brown

black

white/red

black

white/orange

black

VOL. DOWN

coin lamps
orange

PEANUT
SHOOOTER 1

#8556 - RED LED
1
2

orange
violet/green

VOL. UP

black
orange

DIAGNOSTIC

black
white
Coin Switch 1

LOW TICKET SWITCH

black
white/black

blue
black*2
blue/white
orange*2

1
2
3
4

Coin Switch 2
black

1
2

white/brown
white/red
blue

tan
orange

Lockout Coils

orange
violet/green

LOW TICKET SWITCH

blue
black
white
red

WA2010
POWER SUPPLY

1
2
3
4
5
6
7
8
9

BROWN
GREEN/YELLOW
BLUE

tan

BROWN
GREEN/YELLOW
BLUE

black
red

white/green

8
7
6
5
4
3
2
1

red
black

white/yellow

RED * 2
RED * 2

0000000000

B
red/gray
brown/gray

BLACK *2
BLACK * 2
BLACK * 2
WHITE * 2
YELLOW * 2

1
2
3

1 BLACK
2 GREEN/YELLOW
3 WHITE

CS8449X
BALLAST
#PP250X - SOCKET
#8312 - BULB PL-L 40W

MONITOR
BROWN
GREEN/YELLOW
BLUE

1
2
3

1
2
3
4
5
6

yellow/red
yellow/green
yellow/blue
yellow/black
yellow
yellow+yellow/white

1 BROWN
2 GREEN/YELLOW
3 BROWN

DD2364X
FAN ASSEMBLY

TITLE

FZ1000X - ZOOFARI

red/white
brown/white

black * 2

ORANGE

COIN

TICKET

RN2034FZX
MAIN BOARD

3
2
1

1
2
3

BROWN
GREEN/YELLOW
BLUE

8
7
6
5
4
3
2
1

COMPACT
FLASH

KEY # 2991

black

#8556 - RED LED

1
2
3
4
5
6
7
8
9
10
11

tan
tan/black
1
2
3
4
5
6

black
blue/white
violet/white
violet/blue
orange

orange

1
2
3
4
5

TICKET
DISPENSER
#2

COMPONENT SIDE
Ground
1 BLACK
Ground
2 BLACK
+ 5 Volts
3 RED
+ 5 Volts
4 RED
- 5 Volts
5 WHITE
+ 12 Volts
6 YELLOW
KEY
7 KEY
Coin
8 white/green
NC
9 Dummy Pin
Left Speaker +
10 red/gray
Right Speaker +
11 red/white
Red Video
12 yellow/red
Blue Video
13 yellow/blue
Video Ground
14 yellow/black
Diagnostics
15 white/orange
Coin 1
16 white
Player 1 Start
17 Dummy Pin
Player 1 Select
18 Dummy Pin
Player 1 Down
19 Dummy Pin
Player 1 Left
20 Dummy Pin
Player 1 Right
21 Dummy Pin
Player 1 Button 1
22 Dummy Pin
Player 1 Button 2
23 Dummy Pin
Player 1 Button 3
24 Dummy Pin
Player 1 Button 4
25 Dummy Pin
NC
26 Dummy Pin
Ground
27 black
Ground
28 BLACK

Ground
Ground
+ 5 Volts
+ 5 Volts
- 5 Volts
+ 12 Volts
KEY
Ticket
NC
Left Speaker Right Speaker Green Video
Composite Sync
Service
Tilt
Coin 2
Player 2 Start
Player 2 Up
Player 2 Down
Player 2 Left
Player 2 Right
Player 2 Button 1
Player 2 Button 2
Player 2 Button 3
Player 2 Button 4
NC
Ground
Ground

SOLDER SIDE
A BLACK
B BLACK
C RED
D RED
E WHITE
F YELLOW
H KEY
J white/yellow
K Dummy Pin
L brown/gray
M brown/white
N yellow/green
P yellow/white
R Dummy Pin
S Dummy Pin
T white/black
U Dummy Pin
V Dummy Pin
W Dummy Pin
X Dummy Pin
Y Dummy Pin
Z Dummy Pin
a Dummy Pin
b Dummy Pin
c
Dummy Pin
d Dummy Pin
e Dummy Pin
f
BLACK

Contacts at SEGA

Machine Sales
Telephone: +44 (0) 208 391 8090
Fax: +44 (0) 208 391 8099
www.sega-amusements.co.uk

SEGA Spares
Telephone: +44 (0) 208 391 8060
Fax: +44 (0) 208 391 8096
www.segatotalsolutions.com
Customer Services
Telephone: +44 (0) 208 391 8065
Fax: +44 (0) 208 391 8096

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Author                          : jostrowski
Create Date                     : 2009:11:13 12:52:42Z
Modify Date                     : 2009:11:13 12:53:35Z
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Metadata Date                   : 2009:11:13 12:53:35Z
Creator Tool                    : Adobe Acrobat Pro 9.2.0
Format                          : application/pdf
Title                           : Zoofari Service Manual (ICE) 11-02-07.pub
Creator                         : jostrowski
Document ID                     : uuid:ec310bf0-e103-445b-bf3b-f7b3bbf9bda1
Instance ID                     : uuid:c724f8e3-d0fb-4175-95b1-98ea56f95ca6
Producer                        : Adobe Acrobat Pro 9.2.0
Page Count                      : 22

EXIF Metadata provided by EXIF.tools

Arcade Zoofari Manual Service (ICE) 11 02 07 User

Navigation menu

Versions of this User Manual:

Views

Navigation