Arcadyan Technology AIOS4-0S HEOS 4.X Platform Module User Manual OEM Manual

Download:
Mirror Download [FCC.gov]
Document ID	2780256
Application ID	cKlGt6KJJg7QckvvFZiHEA==
Document Description	OEM Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	30.46kB (380704 bits)
Date Submitted	2015-10-13 00:00:00
Date Available	2015-10-14 00:00:00
Creation Date	2017-09-09 21:55:18
Producing Software	GPL Ghostscript 9.18
Document Lastmod	2017-09-09 21:55:18
Document Title	Microsoft Word - User manual_ChapterA-1_150821-ok _補件_.docx
Document Creator	PScript5.dll Version 5.2.2
Document Author:	KellyWeng

AIOS-4.0
Page : 1
OEM/Integrator Manual
Arcadyan Model: AIOS4.0S, AIOS4.0V, AIOS4.0R, AIOS4.0F
Arcadyan Corporation
AIOS-4.0
Page : 2
Table of Contents
0.
SUMMARY OF THIS PRODUCT ........................................................................................................ 3
1.
SPECIFICATION................................................................................................................................. 3
1-1 Basic Specification................................................................................................................................ 3
1-2 Certification Requirement ...................................................................................................................... 4
2. DETAIL SPECIFICATION ....................................................................................................................... 5
2-1. Product Specification............................................................................................................................ 5
2-2. FW Product Specification ..................................................................................................................... 5
2-3. I/O Specification .................................................................................................................................. 5
2-3-1. LED Specification...................................................................................................................... 5
2-3-2. Connector Specification.............................................................................................................. 6
2-3-3. GPIO Map................................................................................................................................. 7
2-3-4. Power Sequence......................................................................................................................... 9
2-3-5. Power Consumption ................................................................................................................... 9
2-3-6. ESD Transient SPEC................................................................................................................ 10
2-3-7. PCB Dimension .............................................................................................................................. 10
3.
WIRELESS SPECIFICATION ........................................................................................................... 11
3-1 Radio 0 specification ........................................................................................................................... 11
3-1-1 WLAN0 specification................................................................................................................ 11
3-1-2 Bluetooth specification .............................................................................................................. 13
3-2 Radio 0 specification ........................................................................................................................... 13
3-2-1 WLAN1 specification................................................................................................................ 13
FCC & IC Statement: ......................................................................................................................... 14
Arcadyan Corporation
AIOS-4.0
Page : 3
0. SUMMARY OF THIS PRODUCT
This product is AIOS-4.0X. There are 4 types of different audio product, AIOS4.0S, AIOS4.0V, AIOS4.0R,
AIOS4.0F
1. SPECIFICATION
1-1 Basic Specification
2.
Item
Contents
Manufacture
Arcadyan
Shipment Name
D&M JP
AIOS-4.0X
TYM
AIOS-4.0X
ANAM
AIOS-4.0X
Product Name
Wireless LAN Network Module
Series Name
Lego module
Model Name
JP
AIOS-4.0
US
Chip
SOC
Vendor
Model name
CPU
Broadcom
BCM58305
2.4GHz MAC/BB/RF
Broadcom
BCM4356
2.4GHz PA(Tx)
Refer wireless spec
2.4GHz LNA(Rx)
Refer wireless spec
2.4GHz BPF(Rx)
Co-layout
5GHz MAC/BB/RF
Broadcom
5GHz PA(Tx)
Refer wireless spec
5GHz LNA(Rx)
Refer wireless spec
5GHz BPF(Rx)
Co-layout
PHY
WAN
None
none
LAN
Broadcom
BCM58305 internal
BCM4356
OS
FW
Driver/Utility
Support Band
ODM
Arcadyan
FW spec
Broadcom SDK AxC-FC2 for function test
Driver
Utility
ODM
Arcadyan
Refer wireless spec
Item
Arcadyan Corporation
Link Rate
Number of ports
AIOS-4.0
Interface
Page : 4
Item
Link Rate
Number of ports
LAN
10/100/1000M
10/100M
USB
2.0
Supply Voltage
5V
Power consumption
9W
Weight
Under 78g
Dimensions
87 x 74 x 1.6mm
Operating Environment
Temperature
degC
Humidity
10~85
% (Non Condensing)
Temperature
-10~85
degC
Humidity
10~85
% (Non Condensing)
Design life time
5years at 25 degrees
Made in
China
1-2 Certification Requirement
USA
FCC Parts15B/15C/15E
FCC ID Approval( with DFS)
DFS/TPC
FCC Bulletin OET-65C
Canada
IC certificate
RSS RSS-247 RF report
RSS-102 MPE report
European
CE EN 300 328/EN 301 893
EN 301 489-1/-17
EN62311
Japan
ARIB STD-T66 / ARIB STD-T71 TELEC ID
Arcadyan Corporation
0~70
AIOS-4.0
Page : 5
2. Detail Specification
2-1. Product Specification
Items
Contents
Vendor
Broadcom
Parts number
BCM58305
Operation frequency
1.25GHz Dual Core
Type
DDR3L
Width
16bit
Operation Freq
1600MHz
Capacity
256MB
Type
NAND Flash
I/O speed
20ns
Capacity
4Gb
Wired
Number of port
LAN
Connector
Type
CPU
RAM
ROM
Color
Chip
Standard
USB
Vendor
Chip
MAC
Broadcom
BCM58305
PHY
Broadcom
BCM58305
10BASE-T/100BASE-Tx/1000BASE-Tx
Standard
Bus power
USB2.0
5V
2-2. FW Product Specification
For detail, refer to FW Specification Requirement sheet
2-3. I/O Specification
2-3-1. LED Specification
Items
LED Interface
Arcadyan Corporation
Name
POWER/DIAG
Color
Green
AIOS-4.0
Page : 6
2-3-2. Connector Specification
Items
Contents
Female 40x2p
Box header connector
Female 21x2p
J9091 – 40x2 pin connector
Pin
Define
Pin
Define
Pin
Define
Pin
Define
PWM0
PWM1
41
SPI0_MISO
42
TDP_PHY0_CH0
PWM2
VDD5_IN
43
GND
44
GND
VDD5_IN
VDD5_IN
45
SPI0_CLK
46
SPI0_MOSI
MCLK_I2S_0
SPDIF_OUT
47
UART1_TX
48
UART1_RTS
GND
10
GND
49
UART1_RX
50
UART1_CTS
11
WS_I2S_0
12
SDIN_I2S_0
51
USB2_VBUS_EN
52
PWM3
13
BITCLK_I2S_0
14
SDOUT_I2S_0
53
GPIO_02
54
GPIO_03
15
GND
16
GND
55
GPIO_04
56
GPIO_05
17
WS_I2S_1
18
SDIN_I2S_1
57
GPIO_06
58
GPIO_07
19
BITCLK_I2S_1
20
SDOUT_I2S_1
59
GPIO_08
60
GPIO_09
21
GND
22
GND
61
GPIO_10
62
GPIO_11
23
WS_I2S_2
24
SDIN_I2S_2
63
GPIO_12
64
GPIO_13
25
BITCLK_I2S_2
26
SDOUT_I2S_2
65
GPIO_14
66
GPIO_15
27
GND
28
GND
67
GPIO_16
68
GPIO_17
29
I2C0_SDA
30
USB2_P2_DM
69
GPIO_18
70
GPIO_19
31
I2C0_SCL
32
USB2_P2_DP
71
GPIO_20
72
GPIO_21
33
GND
34
GND
73
GPIO_22
74
RESET_BUTTON
35
I2C1_SDA
36
TDN_PHY0_CH1
75
GPIO_24
76
GPIO_25
37
I2C1_SCL
38
TDP_PHY0_CH1
77
ADC_AUXIN_0
78
ADC_AUXIN_1
39
SPI0_SS
40
TDN_PHY0_CH0
79
ADC_AUXIN_2
80
ADC_AUXIN_3
J9092 – 2x21 pin connector
Pin
Define
Pin
Define
Pin
Define
Pin
Define
LCD_CLCP
GND
23
LCD_CLD15
24
LCD_CLD14
GND
LCD_CLFP
25
LCD_CLD17
26
LCD_CLD16
LCD_CLLP
LCD_CLAC
27
LCD_CLD19
28
LCD_CLD18
GND
LCD_CLD00
29
LCD_CLD21
30
LCD_CLD20
LCD_CLD01
10
LCD_CLD02
31
LCD_CLD23
32
LCD_CLD22
11
LCD_CLD03
12
LCD_CLD04
33
GND
34
GND
13
LCD_CLD05
14
LCD_CLD06
35
TDN_PHY1_CH0
36
TDN_PHY1_CH1
15
LCD_CLD07
16
LCD_CLD08
37
TDP_PHY1_CH0
38
TDP_PHY1_CH1
Arcadyan Corporation
AIOS-4.0
Page : 7
17
LCD_CLD09
18
LCD_CLD10
39
TDN_PHY1_CH2
40
TDN_PHY1_CH3
19
LCD_CLD11
20
GND
41
TDP_PHY1_CH2
42
TDP_PHY1_CH3
21
LCD_CLD13
22
LCD_CLD12
J4 - Console connector Footprint Pin Define
Pin
Pin Define
VDD3_3
UART3_TX
UART3_RX
GND
J2 - JTAG connector Footprint Pin Define
Pin
Pin Define
Pin
Pin Define
JTAG_RST
GND
JTAG_TDI
GND
JTAG_TDO
GND
JTAG_TMS
GND
JTAG_TCK
10
GND
11
SYS_RST_L
12
UART3_TX
13
UART3_RX
14
VDD3_3
VDD5_IN SPEC:
2-3-3. GPIO Map
Using GPIO of XXXX
Item
Function
Connect to
I/O
Active
XXXXX
CPU
GPIO_05
I/O
GPIO_022
I/O
USB2_VBUS_EN
GPIO_08
I/O
GPIO_09
I/O
GPIO_10
I/O
GPIO_11
I/O
GPIO_12
I/O
Arcadyan Corporation
AIOS-4.0
Page : 8
GPIO_13
I/O
10
RF1_GPIO_6
I/O
11
RF1_BT_GPIO_5
I/O
12
GPIO_14
I/O
13
GPIO_15
I/O
14
GPIO_16
I/O
15
GPIO_17
I/O
16
GPIO_18
I/O
17
GPIO_19
I/O
18
RF2_GPIO_6
I/O
19
GPIO_21
I/O
20
MODULE_TYPE_0
21
MODULE_TYPE_1
22
MODULE_TYPE_2
23
GPIO_04
I/O
24
WL2_REG_ON
25
MODULE_REV0
26
MODULE_REV1
27
MODULE_REV2
28
GPIO_20
I/O
29
RF1_BT_DEV_WAKE
30
FACTORY_RESET_BUTTON
31
GPIO_07
I/O
32
GPIO_24
I/O
33
GPIO_25
I/O
34
GPIO_02
I/O
35
GPIO_06
I/O
36
DSP_DDR_CLK_TERM_EN_L
37
DSP_VDD_EN_L
38
DSP_DDR_EN_L
39
WL1_REG_ON
40
BT1_REG_ON
41
AON_GPIO5
Logic Input high/low Voltage:
Arcadyan Corporation
AIOS-4.0
Page : 9
Drive IO Strength
2-3-4. Power Sequence
BCM 58305 Power Sequence Spec
Spec
Measurement
min(us)
max
Vdd3_3 ramp-up Time
100
711.19us
VDDC_DDR_1_0 ramp-up Time
15ms
671.58us
VDD1_35 ramp-up Time
15ms
699.80us
DDR_VDD1_35 ramp-up Time
15ms
716.31us
BCM 4356 Power Sequence Spec
Spec
Measurement
min(us)
max
RF_Vdd3_6 ramp-up Time
40
771.95us
RF_dd3_6 up before RF_Vdd3_3
2.12ms
2-3-5. Power Consumption
Arcadyan Corporation
y>
AIOS-4.0
Page : 10
2-3-6. ESD Transient SPEC
< >
< >A
2-3-7. PCB Dimension
Arcadyan Corporation
AIOS-4.0
Page : 11
3. Wireless Specification
There are two radios on module, radio 0 and radio 1. Radio 0 include a dual band (2.4 GHz and 5 GHz) WIFI
and Bluetooth. Radio 1 is only 5 GHz WIFI.
Radio 0 is a Station (STA), it could have soft-AP function. Soft-AP does not use DFS channel. Radio 1 is a
AP.
3-1 Radio 0 specification
Radio 0 include a dual band (2.4 GHz and 5 GHz) WIFI and Bluetooth.
3-1-1 WLAN0 specification
Item
Specification
Chip
BCM4356
Interface
PCIe
Frequency
2400~2483.5 MHz (FCC, CE, JP)
2471~2497 MHz (JP)
5150~5250 MHz (W52, U‐NII‐1, Band 1)
5250~5350 MHz (W53, U‐NII‐2A, Band 2)
5470~5725 MHz (W56, U‐NII‐2C, Band 3)
5725~5850 MHz (W58, U‐NII‐3, Band 4)
DFS support
Data Rate
IEEE 802.11b:
11, 5.5, 2, 1 Mbps
IEEE 802.11a
54, 48, 36, 24,18 ,12, 9, 6 Mbps
IEEE 802.11g
54, 48, 36, 24,18 ,12, 9, 6 Mbps
IEEE 802.11n HT20
Up to 150 Mbps
IEEE 802.11n HT40
Up to 300 Mbps
IEEE 802.11ac VHT80
Up to 886.7 Mbps
Arcadyan Corporation
Remark
AIOS-4.0
Page : 12
MIMO
2T2R
Receiver Sensitivity
2.4GHz Band
IEEE 802.11b:
‐97 dBm @1 Mbps
‐88 dBm @11 Mbps
IEEE 802.11g
‐92 dBm @6 Mbps
‐74 dBm @54 Mbps
IEEE 802.11n HT20
‐90 dBm @MCS0
‐71 dBm @MCS7
IEEE 802.11n HT40
‐87 dBm @MCS0
‐68 dBm @MCS7
5GHz band
IEEE 802.11a
‐91 dBm @6 Mbps
‐75 dBm @54 Mbps
IEEE 802.11n HT20
‐91 dBm @MCS0
‐72 dBm @MCS7
IEEE 802.11n HT40
‐89 dBm @MCS0
‐69 dBm @MCS7
IEEE 802.11ac VHT20
‐91 dBm @MCS0
‐72 dBm @MCS8
IEEE 802.11ac VHT40
‐89 dBm @MCS0
‐69 dBm @MCS9
IEEE 802.11ac VHT80
‐86 dBm @MCS0
‐61 dBm @MCS7
Arcadyan Corporation
AIOS-4.0
Page : 13
3-1-2 Bluetooth specification
Item
Chip
Specification
Remark
BCM
Interface
UART
Frequence
2400~2483.5 MHz
Receive sensitivity
‐80 dBm
3-2 Radio 0 specification
Radio 0 is Bluetooth, 2.4G and 5 GHz WIFI.
3-2-1 WLAN1 specification
Item
Chip
Specification
BCM
Interface
PCIe
Frequency
5150~5250 MHz (W52, U‐NII‐1, Band 1)
5250~5350 MHz (W53, U‐NII‐2A, Band 2)
5470~5725 MHz (W56, U‐NII‐2C, Band 3)
5725~5850 MHz (W58, U‐NII‐3, Band 4)
DFS support
Data Rate
IEEE 802.11a
54, 48, 36, 24,18 ,12, 9, 6 Mbps
IEEE 802.11n HT20
Up to 150 Mbps
IEEE 802.11n HT40
Up to 300 Mbps
IEEE 802.11ac VHT80
Up to 886.7 Mbps
MIMO
2T2R
Receiver Sensitivity
5GHz band
IEEE 802.11a
Arcadyan Corporation
Remark
AIOS-4.0
Page : 14
‐91 dBm @6 Mbps
‐75 dBm @54 Mbps
IEEE 802.11n HT20
‐91 dBm @MCS0
‐72 dBm @MCS7
IEEE 802.11n HT40
‐89 dBm @MCS0
‐69 dBm @MCS7
IEEE 802.11ac VHT20
‐91 dBm @MCS0
‐72 dBm @MCS8
IEEE 802.11ac VHT40
‐89 dBm @MCS0
‐69 dBm @MCS9
IEEE 802.11ac VHT80
‐86 dBm @MCS0
‐61 dBm @MCS7
FCC & IC Statement:
FCC Statement:
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one of the following measures:
● Reorient or relocate the receiving antenna.
● Increase the separation between the equipment and receiver.
● Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
● Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
Arcadyan Corporation
AIOS-4.0
Page : 15
This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other
channels is not possible.
This device and it's antennas(s) must not be co-located or operating in conjunction with any other antenna or
transmitter except in accordance with FCC multi-transmitter product procedures.
This device is restricted for indoor use.
IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This
equipment should be installed and operated with minimum distance 20 cm between the radiator & your
body.
Module is limited to OEM installation ONLY
OEM integrators is responsible for ensuring that the end-user has no manual instructions to remove or install
module
If (1) the module’s FCC ID is not visible when installed in the host, or (2) if the host is marketed so that end
users do not have straightforward commonly used methods for access to remove the module so that the
FCC ID of the module is visible; then an additional permanent label referring to the enclosed module:
Contains Transmitter Module FCC ID: RAX-AIOS4-0S or Contains FCC ID: RAX-AIOS4-0S must be
used. The host OEM user manual must also contain clear instructions on how end users can find and/or
access the module and the FCC ID.
A host product is required to comply with all applicable FCC equipment authorizations regulations,
requirements and equipment functions not associated with the transmitter module portion. For example,
compliance must be demonstrated to regulations for other transmitter components within the host product; to
requirements for unintentional radiators (Part 15B), such as digital devices, computer peripherals, radio
receivers, etc.; and to additional authorization requirements for the non-transmitter functions on the
transmitter module (i.e., Verification, or Declaration of Conformity) (e.g., Bluetooth and WiFi transmitter
modules may also contain digital logic functions) as appropriate.
To ensure compliance with all non-transmitter functions the host manufacturer is responsible for ensuring
compliance with the module(s) installed and is fully operational. For example, if a host was previously
authorized as an unintentional radiator under the Declaration of Conformity procedure without a transmitter
certified module and a module is added, the host manufacturer is responsible for ensuring that after the
module is installed and operational the host continues to be compliant with the Part 15B unintentional
radiator requirements. Since this may depend on the details of how the module is integrated with the host,
Arcadyan Corporation
AIOS-4.0
Page : 16
the grantee (the party responsible for the module grant) shall provide guidance to the host manufacturer for
compliance with the Part 15B requirements.
The following statements must be included in the user’s manual of the end product:
Part 15.19 and 15.21 statements (please indicate what they are)
FCC RF Exposure requirements: The antenna(s) used for this transmitter must be installed to provide a
separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other
antenna or transmitter, except in accordance with FCC multi-transmitter product procedures
IC Statement
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the
following two conditions: (1) this device may not cause interference, and (2) this device must accept any
interference, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de
licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de
brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d'en compromettre le fonctionnement.
For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other
channels is not possible.
Pour les produits disponibles aux États-Unis / Canada du marché, seul le canal 1 à 11 peuvent être
exploités. Sélection d'autres canaux n'est pas possible.
This device and it's antennas(s) must not be co-located or operating in conjunction with any other antenna or
transmitter except in accordance with IC multi-transmitter product procedures.
Cet appareil et son antenne (s) ne doit pas être co-localisés ou fonctionnement en association avec une
autre antenne ou transmetteur.
Dynamic Frequency Selection (DFS) for devices operating in the bands 5250- 5350 MHz,
5470-5600 MHz and 5650-5725 MHz
Sélection dynamique de fréquences (DFS) pour les dispositifs fonctionnant dans les bandes 5250-5350
MHz, 5470-5600 MHz et 5650-5725 MHz
The device for operation in the band 5150–5250 MHz is only for indoor use to reduce the potential for
harmful interference to co-channel mobile satellite systems.
les dispositifs fonctionnant dans la bande 5150-5250 MHz sont réservés uniquement pour une
utilisation à l’intérieur afin de réduire les risques de brouillage préjudiciable aux systèmes de satellites
mobiles utilisant les mêmes canaux.
Arcadyan Corporation
AIOS-4.0
Page : 17
The maximum antenna gain permitted for devices in the bands 5250-5350 MHz and 5470-5725 MHz shall
be such that the equipment still complies with the e.i.r.p. limit.
le gain maximal d’antenne permis pour les dispositifs utilisant les bandes 5250-5350 MHz et
5470-5725 MHz doit se conformer à la limite de p.i.r.e.
The maximum antenna gain permitted for devices in the band 5725-5850 MHz shall be such that the
equipment still complies with the e.i.r.p. limits specified for point-to-point and non-point-to-point operation as
appropriate.
le gain maximal d’antenne permis (pour les dispositifs utilisant la bande 5725-5850 MHz)
doit se conformer à la limite de p.i.r.e. spécifiée pour l’exploitation point à point et non point à point, selon le
cas.
Users should also be advised that high-power radars are allocated as primary users (i.e. priority
users) of the bands 5250-5350 MHz and 5650-5850 MHz and that these radars could cause interference
and/or damage to LE-LAN devices.
De plus, les utilisateurs devraient aussi être avisés que les utilisateurs de radars de haute puissance sont
désignés utilisateurs principaux (c.-à-d., qu’ils ont la priorité) pour les bandes 5250-5350 MHz et 5650-5850
MHz et que ces radars pourraient causer du brouillage et/ou des dommages aux dispositifs LAN-EL.
For indoor use only.
Pour une utilisation en intérieur uniquement.
IMPORTANT NOTE:
IC Radiation Exposure Statement:
This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance 20 cm between the
radiator & your body.
Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un environnement
non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la
source de rayonnement et votre corps.
Arcadyan Corporation
AIOS-4.0
Page : 18
This radio transmitter (IC: 4711A-AIOS40S) has been approved by Industry Canada to operate with the
antenna types listed below with the maximum permissible gain and required antenna impedance for each
antenna type indicated. Antenna types not included in this list, having a gain greater than the maximum gain
indicated for that type, are strictly prohibited for use with this device.
Le présent émetteur radio (IC: 4711A-AIOS40S) a été approuvé par Industrie Canada pour fonctionner avec
les types d'antenne énumérés ci-dessous et ayant un gain admissible maximal et l'impédance requise pour
chaque type d'antenne. Les types d'antenne non inclus dans cette liste, ou dont le gain est supérieur au gain
maximal indiqué, sont strictement interdits pour l'exploitation de l'émetteur.
Antenna list:
Set
Brand
P/N
Type
Connector
Airgain
Airgain
Airgain
Airgain
Airgain
Airgain
Airgain
N2420DG3-T2L-PK1-G30U
N2420DG3-T2L-PK1-G100U
N2420DG3-T2L-PK1-G600U
N2425D-T2L-PK1-G30U
N2425D-T2R-PK1-G150U
N2425D-T2R-PK1-G30U
N2425D-T2R-PK1-G500U
PIFA
PIFA
PIFA
PIFA
PIFA
PIFA
PIFA
I-PEX
I-PEX
I-PEX
I-PEX
I-PEX
I-PEX
I-PEX
Set
Brand
Model No.
Type
Connector
10
Arcadyan
Arcadyan
Arcadyan
WN9722A-DM
WN9722A-DM-300mm
WN9722A-DM-500mm
Dipole
Dipole
Dipole
I-PEX
I-PEX
I-PEX
Note: The EUT has ten sets of antenna, and each set contains two antennas.
Arcadyan Corporation
Gain (dBi)
2.4GHz
5GHz
3.10
3.66
3.10
3.66
3.10
3.66
1.90
3.50
1.90
3.50
1.90
3.50
1.90
3.50
Gain (dBi)
2.4GHz
5GHz
2.94
3.19
2.76
2.63
1.99
2.59

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Encryption                      : Standard V4.4 (128-bit)
User Access                     : Print, Extract, Print high-res
Author                          : KellyWeng
Create Date                     : 2015:10:12 11:55:50+08:00
Modify Date                     : 2015:10:12 12:00:22+08:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Producer                        : Acrobat Distiller 15.0 (Windows)
Creator Tool                    : PScript5.dll Version 5.2.2
Metadata Date                   : 2015:10:12 12:00:22+08:00
Format                          : application/pdf
Title                           : Microsoft Word - User manual_ChapterA-1_150821-ok _補件_.docx
Creator                         : KellyWeng
Document ID                     : uuid:c501cd95-0cfa-41cb-85b7-a896fe92fe58
Instance ID                     : uuid:d7239e80-697a-47a3-83a7-c9508ea748f1
Page Count                      : 18

EXIF Metadata provided by EXIF.tools