Arcadyan Technology WG4005G DIGITAL TRANSMISSION SYSTEM User Manual P74808 A F5D7230 4 QIG indd
Arcadyan Technology Corporation DIGITAL TRANSMISSION SYSTEM P74808 A F5D7230 4 QIG indd
USERS MANUAL
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 652276 |
| Application ID | K/8RJHJ0g6W96ZCrgiF5mQ== |
| Document Description | USERS MANUAL |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 117.54kB (1469190 bits) |
| Date Submitted | 2006-04-28 00:00:00 |
| Date Available | 2006-04-27 00:00:00 |
| Creation Date | 2005-08-23 14:07:26 |
| Producing Software | Adobe PDF Library 6.0 |
| Document Lastmod | 2006-04-27 18:42:26 |
| Document Title | P74808-A_F5D7230-4_QIG.indd |
| Document Creator | Adobe InDesign CS (3.0.1) |
1.4 You will see the Wizard’s welcome screen. Make sure you have the following: (click) 2.3 This step instructs you to locate the power supply that is included with your Router. Plug the power supply’s small connector into the GRAY port on the Router. Plug the power supply into an empty power outlet. Run the Easy Install Wizard �������������������� 1. Install 2. Connect � � � � ������� (click) Next 3. Check � � ���� ���� 1.5 Select your region from the drop-down box shown on the screen. Run the Easy Install Wizard Software (click) Installation Software CD Wireless G Router Power Supply Ethernet Cable User Manual Connect your Router to your Computer and Modem OK 1.1 Shut down any programs that are running Advanced Users Go to “Alternate Setup Method” in your User Manual. �������������������� Auto Setup ������� 1.2 Turn off any firewall or Internet-connection���� ����������������� sharing software on your computer. ��������� Users of Windows ® 98SE Windows Me Windows 2000 Windows XP Mac OS ® 9.2 Mac OS X can use Easy Install Wizard 1.3 Windows users: Insert the Easy Install ���������� ������� ����������� ���������� �������� ������� ���������� ���� ���� progress screens to help you know where you are in the setup process. cable connected between your modem and the networking port on your computer. Unplug this cable from the computer and plug it into the GREEN modem port on the Router. (click) Next (click) 1.7 The next screen will tell you that the Wizard is examining your network settings. When the Wizard is finished examining your settings, click “Next”. (click) 3.1 Once you have connected the Router, (click) Next Next 3.2 User Name and Password Needed wired computer cable that is included with your Router. Plug one end of this cable into ANY one of the BLUE wired computer ports on your Router. Plug the other end of the cable into the networking port on your computer. (click) Check the Router’s Connection the Wizard will check the connection and then determine what type of Internet connection you have. Next 2.2 This step instructs you to locate the Mac OS Users: Insert the CD into your CD-ROM drive. A drive will appear on your desktop called “Belkin Easy Install”. Double-click the drive to open it. Mac OS 9 users—double-click the program called “Easy Install OS 9”. Mac OS X users—double-click the program called “Easy Install OSX.dmg”. IMPORTANT: Run the Easy Install Wizard from the computer that is directly connected to the cable or DSL modem. DO NOT CONNECT the Router at this time. 1.6 You will now see the first of a series of (click) Wizard software CD into your CD-ROM drive. The Easy Install Wizard screen will automatically appear on your screen within 15 seconds. on the front of your Router. Make sure the appropriate lights are ON. Refer to the Easy Install software on your computer’s screen for more details. 2.1 This step instructs you to locate the on your computer. DO NOT CONNECT THE ROUTER AT THIS TIME. Manual Setup 2.4 This step instructs you to look at the lights If you have a connection type that requires a user name and password, the Wizard will ask you to type them in. If your connection type does not require a user name and password, you will not see this screen. Next (click) Next Next NOTE for Windows Users: Make sure you have the following If the Easy Install Wizard does not start up automatically, select your CD-ROM drive from “My Computer” and double-click on the file named “EasyInstall.exe” on the CD-ROM. Install Install Connect Connect Check Wireless G 3.3 Wireless Setup 4. Secure Using this step, you can customize your wireless network settings if you want to. Consult the User Manual for more details. Follow the steps on the screen to complete this step. Click “Next” to continue. 5. Configure 1. Unplug the power from the modem (supplied by your ISP). 2. Unplug the power supply from your Router. 3. Wait five minutes. � � �� � � Set Up Network Security Next �� Configure the Router �� �� � � � �� �� �� � � �� �� �� � � � � � � � 4. Reconnect power to the modem. � � �� � � � (click) Router establish an Internet connection. This step will allow the modem to reconfigure itself properly to work with the Router. Please follow the instructions in the sequence indicated below: This Step Is Optional. Click “Next” if you want to skip it. � �� � � �� � � �� �� � �� 5. Wait for the modem to power up (about one minute; please refer to the modem’s documentation for more details). 15.19 (a)(3) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The users manual or instruction manual for an intentional or unintentional radiator shall caution the user that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. CAUTION: 1. To comply with FCC RF exposure compliance requirements, a separation distance of at least 20 cm must be maintained between the antenna of this device and all persons. 2. This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter you will be prompted by the Easy Install Wizard to select your desired security level. If you do not want security or would prefer to install at a later time, click the radio button next to “NONE”, and click “Next.” �� �� � � �� � � � Next � � � � �� �� � (click) �� �� � � �� �� �� � � � � �� �� � Next (click) � �� �� Next Note: If the Easy Install Wizard repeatedly 4.4 Security setup is now complete. Click displays an error stating that it cannot make an Internet connection, you may need to power cycle your modem in order to “Next” to configure. Next Finish � �� The Wizard will now check for an Internet connection. This can take a few minutes. The Wizard may not detect a connection right away. If not, it will retry a number of times. The “Connected” light on the front panel of the Router will flash during this time. Please be patient through this process, and wait for the connection to be detected. security option features a two-password setup. You can select one password that provides COMPLETE NETWORK access and another password for GUEST (Internet only) access only. Click “Next”. When the Internet connection is complete, the Wizard will tell you that you are finished. The “Connected” LED on the front of the Router will be solid GREEN, indicating that the Router is now connected to the Internet. � 5.2 Checking Internet 4.3 The Wi-Fi Protected Access (WPA) (click) � � � � � � �� � (click) 5.3 Finished configuration information to the Router. This will take approximately one minute. During this time, do not turn off the Router or computer. The Router will restart itself at the end of this step. 4.2 WEP and WPA are the two security options. (click) 7. Check your Internet connection. 5.1 The Wizard will now transfer all of the Start Networking! �� � � � � �� �� � � � �� � � � � �� �� �� � Secure Configure Configure If installing numerous networking devices at the same time, always install your Router first before installing other network components, such as notebook cards and desktop cards. Belkin Ltd. 7 Bowen Crescent, West Gosford NSW 2250, Australia +61 (0) 2 4372 8600 +61 (0) 2 4372 8603 fax Belkin B.V. Boeing Avenue 333 1119 PH Schiphol-Rijk, The Netherlands +31 (0) 20 654 7300 +31 (0) 20 654 7349 fax © 2005 Belkin Corporation. All rights reserved. All trade names are registered trademarks of respective manufacturers listed. Mac OS is a trademark of Apple Computer, Inc., registered in the U.S. and other countries. Please visit http://www.belkin.com/networking for latest software updates and technical information. Start Here Belkin Ltd. Express Business Park, Shipton Way Rushden, NN10 6GL, United Kingdom +44 (0) 1933 35 2000 +44 (0) 1933 31 2000 fax Congratulations! You have finished installing your new Belkin Router. To test your Internet connection, open your browser and visit any website, such as www.belkin.com. A pop-up reminder screen for our included Parental Control Web Content Filter will appear. Please refer to your “Parental Control Web Content Filter” User Manual for detailed information. Need Help? Check Belkin Tech Support US: 877-736-5771 310-898-1100 ext. 2263 Europe: 00 800 223 55 460 Australia: 1800 235 546 New Zealand: 0800 235 546 Singapore: 800 616 1790 Belkin Corporation 501 West Walnut Street Compton, CA 90220-5221, USA 310-898-1100 310-898-1111 fax � Router (15.21) •Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user authority to operate the equipment. 6. Reconnect power to the Router. 4.1 After connection has been established, Wireless G 10 P74808-A Quick Installation Guide ����� ������� F5D7230-4
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Modify Date : 2006:04:27 18:42:26+08:00 Create Date : 2005:08:23 14:07:26Z Trapped : False Creator : Adobe InDesign CS (3.0.1) Producer : Adobe PDF Library 6.0 Page Count : 2 About : uuid:3d606903-141a-11da-afee-000d9347a30a Creation Date : 2005:08:23 14:07:26Z Mod Date : 2006:04:27 18:42:26+08:00 Metadata Date : 2006:04:27 18:42:26+08:00 Creator Tool : Adobe InDesign CS (3.0.1) Thumbnail Format : JPEG Thumbnail Width : 256 Thumbnail Height : 256 Thumbnail Image : (Binary data 5274 bytes, use -b option to extract) Version ID : 1 Rendition Class : proof:pdf Derived From Instance ID : 598faca1-14c5-11da-a094-91a956364d93 Derived From Document ID : adobe:docid:indd:59c95e77-0f02-11da-a18a-f3a8a93a0815 Derived From Version ID : 1 Document ID : adobe:docid:indd:598faca2-14c5-11da-a094-91a956364d93 Format : application/pdf Title : P74808-A_F5D7230-4_QIG.indd Has XFA : NoEXIF Metadata provided by EXIF.tools