Arcadyan Technology WN6401CARC Wireless miniPCI 802.11 a/g/b adapter User Manual WN6401C Installation Guide 08282003

Download:
Mirror Download [FCC.gov]
Document ID	356701
Application ID	Ws/ae3o2iAG9pS0I+XnMXA==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	51.66kB (645800 bits)
Date Submitted	2003-09-15 00:00:00
Date Available	2003-09-15 00:00:00
Creation Date	2003-09-09 20:58:05
Producing Software	Acrobat PDFWriter 4.05 for Windows NT
Document Lastmod	2003-09-09 20:58:32
Document Title	WN6401C Installation Guide_08282003.PDF
Document Creator	Microsoft Word - WN6401C Installation Guide_08282003
Document Author:	amanda

Introduction
1. Introduction
The WN6401C is an IEEE 802.11a/b/g standard compatible MiniPCI PC Card, which
supports high data rate up to 54Mbps (for 802.11a or g) over the Ethernet speed,
while remaining backward compatible to the existing installed base of 802.11b over
15 million Wi-Fi systems worldwide. WN6401C will enable a next generation of
high-data-rate platforms for operation in the 2.4 GHz band that deliver a five-fold
speed increase. In addition, a 30 percent range advantage and lower power
consumption are realized compared to systems operating in the 5 GHz spectrum. The
cost and performance advantages will make it an ideal solution for high bandwidth
enterprise applications, such as wireless video conferencing and large file transfers, as
well as advanced home networking applications such as multi-channel CD-quality
audio and DVD-quality video streaming. WN6401C incorporates the 802.11g Draft
Standard's 7.0 mandatory modulation schemes— Complementary Code Keying (CCK),
which is used in 802.11b, and Orthogonal Frequency Division Multiplexing (OFDM),
used in 802.11g or 11a. Using CCK ensures backward-compatibility with the installed
Wi-Fi 802.11b base, while OFDM provides the speed required for today's highbandwidth applications.
1.1 Product Features
♦ High speed for wireless LAN connection, up to 54 Mbps data rate in 11a or 11g
standard.
♦ Support for 802.11a or 802.11g with enhanced “turbo mode” up to 108Mbps for
high data throughput access.
♦ Backward compatible to the existing IEEE 802.11b WLAN infrastructure.
♦
♦
♦
♦
♦
♦
An user-friendly utility to configure SSID, security setup and site survey.
Wireless data encryption with 64, 128 encryption for security.
Support for WPA.
Hardware AES Accelerator.
Built-in antenna connectors.
Firmware upgradeable by only changing driver.
1.2 Applications
♦ Home networking for device sharing.
♦ Wireless multimedia.
♦ Wireless office for extension Ethernet range.
♦ Mobile networking for notebook PC, PDA, Web Pad or Wireless Gateway Built-
in Application.
WN6401C Installation Guide
1. Execute Setup.exe. Click “Next” button.
2. Select “I accept the terms of license agreement”. Click “Next” button.
3. Select “Install Driver and Atheros Applications (recommended). Click “next”
button.
4. Use the default install directory. Click “Next” button.
5. Use the default program folder. Click “Next” button.
6. Installation begins.
7. Then click “Finish” to end.
8. Then You may use the utility.
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
FCC Caution: Any changes or modifications not expressly approved by
the party responsible for compliance could void the user's authority to
operate this equipment.
IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated
with minimum distance 20cm between the radiator & your body.
This device is intended only for OEM integrators under the following
conditions:
1) The antenna must be installed such that 20 cm is maintained between the
antenna and users, and
2) The antenna should be integral if the end device is intended to be operated
in 5.15 ~ 5.25GHz frequency range.
As long as 2 conditions above are met, further transmitter test will not be
required. However, the OEM integrator is still responsible for testing their endproduct for any additional compliance requirements required with this module
installed (for example, digital device emissions, PC peripheral requirements,
etc.).
IMPORTANT NOTE: In the event that these conditions can not be met (for
example certain laptop configurations or co-location with another transmitter),
then the FCC authorization is no longer considered valid and the FCC ID can
not be used on the final product. In these circumstances, the OEM integrator
will be responsible for re-evaluating the end product (including the transmitter)
and obtaining a separate FCC authorization.
End Product Labeling
This transmitter module is authorized only for use in device where the antenna
may be installed such that 20 cm may be maintained between the antenna and
users . The final end product must be labeled in a visible area with the
following: “Contains TX FCC ID: RAXWN6401CARC”.
Manual Information That Must be Included
The OEM integrator has to be aware not to provide information to the end user
regarding how to install or remove this RF module in the users manual of the
end product which integrate this module.
The users manual for OEM integrators end users must include the following
information in a prominent location “ IMPORTANT NOTE: To comply with FCC
RF exposure compliance requirements, the antenna used for this transmitter
must be installed to provide a separation distance of at least 20 cm from all
persons and must not be co-located or operating in conjunction with any other
antenna or transmitter”.
If the end product integrating this module is going to be operated in 5.15 ~
5.25GHz frequency range, the warning statement in the user manual of the
end product should include the restriction of operating this device in indoor
could void the user’s authority to operate the equipment.
Certification
CE Mark
Emissions
FCC Class B, ETSI 300.328, C-Tick, ICES-003
EN55022 (CISPR 22) Class B
EN55024, IEC 61000-4-2/-3
Safety: EN60950

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Encryption                      : Standard V1.2 (40-bit)
User Access                     : Print, Fill forms, Extract, Assemble, Print high-res
Creator                         : Microsoft Word - WN6401C Installation Guide_08282003
Create Date                     : 2003:09:09 20:58:05
Title                           : WN6401C Installation Guide_08282003.PDF
Author                          : amanda
Producer                        : Acrobat PDFWriter 4.05 for Windows NT
Modify Date                     : 2003:09:09 20:58:32+08:00
Page Count                      : 8

EXIF Metadata provided by EXIF.tools