Arcadyan Technology WN8122B Wi-Fi MODU User Manual
Arcadyan Technology Corporation Wi-Fi MODU
User Manual
Page: 1 Delivery Specification Compal Model Name: 1T8C000002I/1T8C000003I Arcadyan Model Name: WN8122BTEAC-HF-CP Arcadyan Title Project Manager Sales Name Nia Hsiao Alvin Yang 2018/06/15 2018/06/15 Compal Purchasing RD Signature Date This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation CONFIDENTIAL Arcadyan Technology Corporation Ver.0.8 Page: 2 Document Updates Log Rev. Revision Date Revision Contents Requested by V 0.1 09/07/2017 Initial Document Bill Chang V 0.2 11/13/2017 Update 2.4G HT40- MCS7 Power setting Nia Hsiao V 0.3 01/12/2018 Update 2.4G HT40- MCS7 Power setting & Power Consumption Sho Tu V 0.4 03/27/2018 Update Packing Label information Nia Hsiao V 0.5 04/10/2018 Update PCB dimension Nia Hsiao V 0.6 04/20/2018 Update Compal 2D Barcode Rule & Packing Nia Hsiao V 0.7 05/08/2018 Update PCBA photo Nia Hsiao V 0.8 06/12/2018 Update Certification Statement, External Antenna List, SN/MAC Nia Hsiao Label for certification ID, Carton Label for FCC statement CONFIDENTIAL Arcadyan Technology Corporation Ver.0.8 Page: 3 Table of Contents 1. SPECIFICATION .................................................................................................................................... 4 1-1 Basic Specification ............................................................................................................................. 4 1-2 Certification Verified (Module level) ................................................................................................... 5 2. DETAIL SPECIFICATION ..................................................................................................................... 5 2-1. Product Specification ........................................................................................................................ 5 2-1-1. Connector Specification .......................................................................................................... 5 2-1-2. Power Consumption ............................................................................................................... 6 2-1-3. Electrical Characteristics ........................................................................................................ 6 3. NOTICE ................................................................................................................................................... 7 3-1-1. ESD protection........................................................................................................................ 7 4. CERTIFICATION STATEMENT ........................................................................................................... 8 4-1. Federal Communication Commission Interference Statement .................................................. 8 4-2. IC Statement ............................................................................................................................ 10 CONFIDENTIAL Arcadyan Technology Corporation Ver.0.8 Page: 4 1. SPECIFICATION 1-1 Basic Specification Item Manufacture Contents Arcadyan Technology Corporation Arcadyan Part Number FICCP8122000J Product Name Wireless LAN Network Module Chip SOC Vendor CPU None 2.4GHz MAC/BB/RF MediaTek MT7668AUN 2.4GHz PA(Tx) MediaTek Embedded in MT7668AUN 2.4GHz LNA(Rx) MediaTek Embedded in MT7668AUN 2.4GHz BPF(Tx/Rx) ACX Diplexer:DP1608-A2455D Model name TA2T Murata Diplexer:LFD182G45MJK E484 FW Driver/Utility 5GHz MAC/BB/RF MediaTek MT7668AUN 5GHz PA(Tx) MediaTek Embedded in MT7668AUN 5GHz LNA(Rx) MediaTek Embedded in MT7668AUN 5GHz BPF(TX/Rx) Used with 2.4G ODM Arcadyan Technology Corporation FW spec Manufacturing Firmware Driver No need ODM Support Band Refer wireless spec Interface Item Type Number of ports USB2.0 10 pin connector Supply Voltage 5V Power consumption 2.415W Weight(with head think) TBD Dimensions 40mm*46.5mm*9.06mm Operating Environment Temperature 0~70 Degree C Humidity 10~90 % (Non Condensing) Temperature -10~75 Degree C Humidity 10~90 % (Non Condensing) Storage Environment Design life time TBD Factory location China CONFIDENTIAL Arcadyan Technology Corporation Ver.0.8 Page: 5 1-2 Certification Verified (Module level) Regulatory/Connectivity/Safety Certification Countries and Regions Regulatory USA FCC Part 15B,C,E, (including MPE report) Canada RSS-247, RSS-102 and ICES003 BQB RF.TS.5.0.0 and RF-PHY.TS.5.0.0 2. Detail Specification 2-1. Product Specification Items Contents WiFi/BT Vendor MediaTek Chip Parts number MT7668AUN USB Standard Bus power 2-1-1. Connector Specification Items Contents Box header connector Female 10p @CON8 CON1 – 10 pin connector Pin NO. Define WIFI-reset BT_WAKE_HOST GND WoWL GND USB_DM USB_DP SET_PWR BT_IR 10 GPIO_X CONFIDENTIAL Arcadyan Technology Corporation Ver.0.8 USB2.0 Client 5V External supply Page: 6 2-1-2. Power Consumption 2-1-3. Electrical Characteristics CONFIDENTIAL Arcadyan Technology Corporation Ver.0.8 Page: 7 3. Notice 3-1-1. ESD protection ATTENTION: Operators need to wear the antistatic ring when assembled module. CAUTION: Improper operation without proper prevention for ESD may cause equipment damage. CONFIDENTIAL Arcadyan Technology Corporation Ver.0.8 Page: 8 4. Certification Statement 4-1. Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: ● Reorient or relocate the receiving antenna. ● Increase the separation between the equipment and receiver. ● Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ● Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other channels is not possible. This device is restricted for indoor use. IMPORTANT NOTE: Any changes or modifications not expressly approved by the manufacturer could void the user's authority to operate this equipment. CONFIDENTIAL Arcadyan Technology Corporation Ver.0.8 Page: 9 USERS MANUAL OF THE END PRODUCT: In the users manual of the end product, the end user has to be informed to keep at least 20cm separation with the antenna while this end product is installed and operated. The end user has to be informed that the FCC radio-frequency exposure guidelines for an uncontrolled environment can be satisfied. The end user has to also be informed that any changes or modifications not expressly approved by the manufacturer could void the user's authority to operate this equipment. This device complies with Part 15 of FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. LABEL OF THE END PRODUCT: The final end product must be labeled in a visible area with the following " Contains TX FCC ID: RAXWN8122B ". This device complies with Part 15 of FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. Gain (dBi) Ant. Port Brand arcadyan arcadyan P/N Antenna Type Printed Antenna Printed Antenna Connector N/A WLAN WLAN 2.4GHz 5GHz 3.5 4.7 Remark BT N/A 0.8 3.8 arcadyan 120800060900J PIFA Antenna I-PEX 0.1 3.16 arcadyan 120800060400J PIFA Antenna I-PEX -0.7 3.25 arcadyan 120800060300J PIFA Antenna I-PEX 2.04 CONFIDENTIAL Arcadyan Technology Corporation Ver.0.8 Internal antenna External antenna Page: 10 4-2. IC Statement This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other channels is not possible. Pour les produits disponibles aux États-Unis / Canada du marché, seul le canal 1 à 11 peuvent être exploités. Sélection d'autres canaux n'est pas possible. This radio transmitter (IC:4711A-WN8122B) has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. Le présent émetteur radio (IC:4711A-WN8122B) a été approuvé par Industrie Canada pour fonctionner avec les types d'antenne énumérés ci-dessous et ayant un gain admissible maximal d'antenne. Les types d'antenne non inclus dans cette liste, ou dont le gain est supérieur au gain maximal indiqué, sont strictement interdits pour l'exploitation de l'émetteur. The device for operation in the band 5150–5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems. les dispositifs fonctionnant dans la bande 5150-5250 MHz sont réservés uniquement pour une utilisation à l’intérieur afin de réduire les risques de brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux. The maximum antenna gain permitted for devices in the band 5725-5850 MHz shall be such that the equipment still complies with the e.i.r.p. limits specified for point-to-point and non-point-to-point operation as appropriate. le gain maximal d’antenne permis (pour les dispositifs utilisant la bande 5725-5850 MHz) doit se conformer à la limite de p.i.r.e. spécifiée pour l’exploitation point à point et non point à point, selon le cas. CONFIDENTIAL Arcadyan Technology Corporation Ver.0.8 Page: 11 IMPORTANT NOTE: Any changes or modifications not expressly approved by the manufacturer could void the user's authority to operate this equipment. USERS MANUAL OF THE END PRODUCT: In the users manual of the end product, the end user has to be informed to keep at least 20cm separation with the antenna while this end product is installed and operated. The end user has to be informed that the IC radio-frequency exposure guidelines for an uncontrolled environment can be satisfied. The end user has to also be informed that any changes or modifications not expressly approved by the manufacturer could void the user's authority to operate this equipment. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. LABEL OF THE END PRODUCT: The final end product must be labeled in a visible area with the following " Contains IC: 4711A-WN8122B". The Host Model Number (HMN) must be indicated at any location on the exterior of the end product or product packaging or product literature which shall be available with the end product or online. Gain (dBi) Ant. Port Brand P/N Antenna Type Printed Antenna Printed Antenna Connector Remark WLAN WLAN 2.4GHz 5GHz N/A 3.5 4.7 N/A 0.8 3.8 BT arcadyan arcadyan arcadyan 120800060900J PIFA Antenna I-PEX 0.1 3.16 arcadyan 120800060400J PIFA Antenna I-PEX -0.7 3.25 arcadyan 120800060300J PIFA Antenna I-PEX 2.04 CONFIDENTIAL Arcadyan Technology Corporation Ver.0.8 Internal antenna External antenna
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Author : ElsaLin Create Date : 2018:06:26 10:14:16+08:00 Modify Date : 2018:06:26 10:21:07+08:00 XMP Toolkit : Adobe XMP Core 5.6-c015 84.159810, 2016/09/10-02:41:30 Format : application/pdf Title : Microsoft Word - WN8122BTEAC-CP_Product_Specification_0.8_20180626_OK Creator : ElsaLin Creator Tool : PScript5.dll Version 5.2.2 Metadata Date : 2018:06:26 10:21:07+08:00 Producer : Acrobat Distiller 17.0 (Windows) Document ID : uuid:a6564da2-73db-48fe-a2b3-210afca10977 Instance ID : uuid:390eb0f7-e2c7-4648-9dc4-f66438c51aa5 Page Count : 11EXIF Metadata provided by EXIF.tools