Aroot LK-P21B Mobile Printer User Manual

SEWOO TECH CO., LTD. Mobile Printer

User manual

Download: Aroot LK-P21B Mobile Printer User Manual
Mirror Download [FCC.gov]Aroot LK-P21B Mobile Printer User Manual
Document ID1135959
Application IDRNe4tLI6/qcZrx+C2iLfDw==
Document DescriptionUser manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize140.44kB (1755464 bits)
Date Submitted2009-07-08 00:00:00
Date Available2009-07-08 00:00:00
Creation Date2009-02-26 18:53:27
Producing SoftwareAdobe PDF Library 8.0
Document Lastmod2009-07-07 10:27:01
Document TitleUser manual
Document CreatorAdobe InDesign CS3 (5.0)

MODEL : LK-P21B
MOBILE PRINTER
All specifications are subject to change without notice
1. Unpacking
Table of Contents
1. Product overview
2. Unpacking
3. Usage and Installation
3-1. Control panel usage
3-2. Battery Installation
3-3. Battery removal
3-4. Battery charging
3-5. Battery charger usage
3-6. Usage of Cigar Jack for charging
10
3-7. Belt clip usage
12
3-8. Roll paper installation
13
3-9. Leather case usage
14
3-10. Self test
15
3-11. MSR usage
16
4. Peripherals connection
17
4-1. Bluetooth connectiontion
17
4-2. Interface cable connection
18
5. Printer specification
5-1. Specification
Standard
Printer
Charger
Roll paper
Battery
Belt Buckle
USB Cable Shielded
CD
Serial Cable
Quick Manual
Option
19
19
Battery Holder (Cradle)
Cigar Jack
Leather case
Shoulder strip
2. Product overview
3. Usage and Installation
3-1 Control panel usage
Paper feed
button
Open Button
Power
switch
USB
Button
Name
function
SERIAL
Power
button
Belt clip
hole
Battery
Paper
Feed
Button
Battery
Status
Lamp
DC Power
Error
Lamp
This button is used to turn the printer on and off.
When the printer is off, press this button for approximately 2 seconds
and it will turn on the power. When you press this button in a state
that the printer is on, the printer will turn off.
Paper output can be done manually by pressing this button.
Additionally, self-testing and Hexadecimal Dumping can be
processed..
1. Refer to “3-10” for self test information.
2. Refer to the service manual regarding Hexadecimal Dumping.
1. If the Batt, LED are Lit, the battery is fully charged.
2. If you can hear beeping sound and LED light is turned off, it means
that the battery is at the lowest level.
3. If the battery is not charged at all, the printer turns off
automatically.
If the red light is turned on, it means there is no paper roll or the
paper cover is open.
3-2 Battery Installation
3-3 Battery removal
180˚
Hook
Put up the Belt clip hole turning 180 degree.
1. Align battery hook as shown in the picture
2. Push the battery into the printer until it locks in place.
NOTE
As the battery is not charged at the time of your purchase, charge the
battery prior to using the printer
(Battery charger or Cradle can be used to charge)
After putting up the belt clip, remove the battery holding it up as shown above.
3-4 Battery charging
3-5 Battery charger usage
lamp
1. Be sure that the printer is turned off
2. After open the DC JACK cover, insert DC JACK into the printer.
3. Plug the power code to electrical outlet.
NOTE
1. Unless the exclusive charger is used provided by the manufacturer, the printer
can be damaged, and the manufacturer is not liable for the consequential damage.
2. Before removing the battery, make sure that power is turned off.
3. Printer does not work in the status of being connected with charger only.
4. The battery should be installed to operate printer.
5. While charging, do not turn on the power.
1. Insert the battery into the battery holder as shown above
2. Connect the DC JACK to the power electrical outlet.
3. Once the charging is completed, remove the battery from the holder.
3-5-1 The status of lamp in charging
Status
charging
charging complete
Charging Lamp
Red
Green
NOTE
In the case the battery is not fixed properly in the holder, the red lamp will be
blinking, Then, extract and reinsert the battery.
6. Do not operate the print while charging the battery.
7. Do not connect the charger while the printer is operated.
3-6 Usage of Cigar Jack for charging
3-7 Belt Clip usage
Printer
Insert the belt clip screw into the hole of Belt clip
Battery holder
Connect the car cigar JACK charger into the printer or battery holder.
10
As shown in the picture, tighten the screw with a screw driver.
11
3-8 Roll Paper installation
3-9 Leather case usage
Press the PUSH button to open
paper cover
Insert the paper in the right
direction
Open the leather case
1 2
3 4
Pull a short length of paper out of
the printer and close the cover.
12
Place the printer into the leather
case
1 2
3 4
Tear off the additional paper using
tear bar.
Close the Velcro and stick the
cover.
Fasten to the belt by using the clip
at the rear of the leather case
13
3-10 Self Test
Turn off the power pressing the
power button for approximately
2 minutes.

While you are pressing the FEED
button, press the power button
1 2
NOTE
1. To print ASCII pattern additionally,
press the Feed button once more
2. After printing ASCII pattern, the
self test will be finished automatically.
3. If the Feed button is not pressed
to print ASCII pattern, self test will be
finished automatically after 30 seconds.
When the printer is installed initially or when you face a problem, you can run the
self test and check the information about
-Control Circuit, Mechanism, Print Quality, ROM Version
After checking with self-test and no issues are found, you can examine other
devices and software. This function is working independent of devices and software.
The printout is produced.
14
● Motor protection from being overheated
The motor should be stopped and cooled about more than 30 seconds after
continuous printing 1.5 meter
15
4. Peripherals connection
3-11 MSR usage
This printer can communicate with Peripherals device via Bluetooth
and cables.
4-1 Bluetooth Connection
Insert and swipe the card in the direction of the arrow as shown in the
picture.
1. Printer can be connected to the PDA and PC which can do wireless
communication.
2. By using Bluetooth function supported in PC, printer can be connected.
16
17
5. Pritner Specification
4-1 Bluetooth Connection
5-1 Specification
USB
Serial
1. Connect USB or Serial cable into the cable connector on the printer.
Printing Method
Direct Thermal
Printing Speed
80mm/sec
Resolution
203 DPI X 203 DPI
Character
Font A (12X24), Font B (9X17)
Character per line
Font A : 32 columns , Font B : 42 columns
Character set
ALPHA NUMERIC Charactor, Extension grapic
Barcode
EAN-8, EAN-13, Code39, ITF, UPC-A,
Codabar, Code93, Code128
Emulation
ESC/POS
Driver
Window CE 4.2 & 5.0, Window Mobile 5.0
Paper End Sensor , Cover open Sensor
Sensor
paper type
Thermal Paper
NOTE
width
58mm
Use the cable offered by the manufacturer (USB, Serial)
thickness
65㎕
External Diameter
Max. Φ40mm
Internal Diameter
12.5mm +/-0.5mm
TPH
50km
Battery
Continuous printing operation: 1hr and 30min
Standby: 24hrs
Printing length: 162m
Paper
2. Connect the interface cable into the USB or Serial port of the device
(PDA, PC, etc.)
Reliability
Serial(RS-232C), USB, Bluetooth Class2
Communications
MSR (Optional)
18
Card Standard
ISO7811/2, JIS
Track
1Track, 2Track, 3Track, JIS-II
Magnet Head Life
300,000 Passes(minimum)
19
Battery Charger
Battery Charger
Size
input
AC100~240V, 50/60 Hz
output
8.4V , 800~1200mA
Battery type
Li-on
output
7.4V, 1130mAh
Charging time
2 Time
W X D X H(mm)
96 X 136 X 58
W X D X H”
3.7 X 5.3 X 2.2
0.4kg
Weight
Temperature
Humidity
20
operation
5 ~ 40℃
storage
-10 ~ 50℃
operation
35 ~ 95%
21
5GVVKPIWRVJGUQHVYCTG
3OHDVHUHIHUWRWKHSURJUDPPLQJPDQXDOLQFOXGHGLQ&'
ǁ%GTVKHKECVKQP
(%%+PHQTOCVKQP
This device complies with part 15 of the FCC Results. Operation is subject to
the following two conditions:
(1) This Device may not cause harmful interface, and
(2) This device must accept any interference received, including
interference that may cause undesired operation.
%#76+10
#PVGPPCUJCNNDGOQWPVGFKPUWEJCOCPPGTVQOKPKOK\GVJGRQVGPVKCNHQTJWOCP
EQPVCEVFWTKPIPQTOCNQRGTCVKQP6JGCPVGPPCUJQWNFPQVDGEQPVCEVGFFWTKPI
QRGTCVKQPVQCXQKFVJGRQUUKDKNKV[QHGZEGGFKPIVJG(%%TCFKQHTGSWGPE[GZRQUWTG
NKOKV
0QVG
This equipment has been tested and found to comply with the limits for
CLASS B digital device, pursuant to Part 15 of FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment
generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instuctions, may cause harmful interference
to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try correct the
interference by one or more of the following measures:
1.1. Reorient or relocate the receiving antenna.
1.2. Increase the separation between the equipment and receiver.
1.3. Connect the equipment into an outlet on a circuit different from
that to which receiver is connected.
1.4. Consult the dealer or experienced radio/TV technician for help.
9#40+0)
%JCPIGU QT OQFKHKECVKQPU PQV GZRTGUUN[ CRRTQXGF D[ VJG OCPWHCEVWTGT
EQWNFXQKFVJGWUGThUCWVJQTKV[VQQRGTCVGVJGGSWKROGPV


SEWOO TECH CO.,LTD.
ADDRESS Doosung Bd, 689-20, Kumjung-dong, Kunpo-si, Kyunggi-do, Korea
TEL 82-31-459-8200 FAX 82-31-459-8880
URL http://www.miniprinter.com
Rev. 1.0

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Tagged PDF                      : No
XMP Toolkit                     : 3.1-702
Create Date                     : 2009:02:26 18:53:27+09:00
Metadata Date                   : 2009:07:07 10:27:01+09:00
Modify Date                     : 2009:07:07 10:27:01+09:00
Creator Tool                    : Adobe InDesign CS3 (5.0)
Thumbnail Format                : JPEG
Thumbnail Width                 : 256
Thumbnail Height                : 256
Thumbnail Image                 : (Binary data 6049 bytes, use -b option to extract)
Instance ID                     : uuid:fd538153-df1f-422d-abf3-587dcc64a2a5
Document ID                     : adobe:docid:indd:323bd4d2-fbd2-11dd-8b94-eb8593339d58
Rendition Class                 : proof:pdf
Derived From Instance ID        : ed2e2470-f966-11dd-8707-a2aa392c528c
Derived From Document ID        : adobe:docid:indd:6040e863-f326-11dd-a49b-f654d1268904
Manifest Link Form              : ReferenceStream, ReferenceStream, ReferenceStream
Manifest Placed X Resolution    : 300.00, 150.00, 150.00
Manifest Placed Y Resolution    : 300.00, 150.00, 150.00
Manifest Placed Resolution Unit : Inches, Inches, Inches
Manifest Reference Instance ID  : uuid:A4F46F1EDF03DE1192C2ED6A3ACD1785, uuid:EB3B654F1BE9DD11B220A206391D7EE5, uuid:EF3B654F1BE9DD11B220A206391D7EE5
Manifest Reference Document ID  : uuid:A3F46F1EDF03DE1192C2ED6A3ACD1785, uuid:EA3B654F1BE9DD11B220A206391D7EE5, uuid:EE3B654F1BE9DD11B220A206391D7EE5
Format                          : application/pdf
Producer                        : Adobe PDF Library 8.0
Trapped                         : False
Page Count                      : 14
Creator                         : Adobe InDesign CS3 (5.0)
EXIF Metadata provided by EXIF.tools
FCC ID Filing: WF5LK-P21B

Navigation menu