Aroot LK-P41W Mobile Printer User Manual

SEWOO TECH CO., LTD. Mobile Printer

User manual

Download: Aroot LK-P41W Mobile Printer User Manual
Mirror Download [FCC.gov]Aroot LK-P41W Mobile Printer User Manual
Document ID1167909
Application IDzYbRA9uKohE47urllHzSnw==
Document DescriptionUser manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize156.46kB (1955794 bits)
Date Submitted2009-09-10 00:00:00
Date Available2009-09-10 00:00:00
Creation Date2009-07-24 14:22:29
Producing SoftwareAdobe PDF Library 8.0
Document Lastmod2009-09-08 11:46:21
Document TitleUser manual
Document CreatorAdobe InDesign CS3 (5.0)

MODEL : LK-P41W
MOBILE PRINTER
All specifications are subject to change without notice
1. Unpacking
Table of Contents
Standard
1. Product overview
2. Unpacking
3. Usage and Installation
3-1. Control panel usage
3-2. Battery Installation
3-3. Battery charging
3-4. Battery charger usage
3-5. Roll paper installation
3-6. Leather case usage
10
3-7. Self test
11
4. Peripherals connection
13
4-2. Interface cable connection
14
5-1. Specification
Charger
CD
15
15
6. CPCL Command Compatibility
17
USB Cable Shielded
Roll paper
Serial Cable
7. Setting up the software
20
Quick Manual
Option
Battery Holder (Cradle)
Battery
13
4-1. Wifi(802.11b/g) Connection
5. Printer specification
Printer
Leather case
Shoulder strip
2. Product overview
3. Usage and Installation
3-1 Control panel usage
Open Button
Paper feed
button
Power
switch
USB
SERIAL
Battery
DC Power
Button
Name
Power
button
This button is used to turn the printer on and off.
When the printer is off, press this button for approximately 3 seconds
and it will turn on the power. When you press this button in a state
that the printer is on, the printer will turn off.
Paper
Feed
Button
Paper output can be done manually by pressing this button.
Additionally, self-testing and Hexadecimal Dumping can be
processed..
1. Refer to “3-10” for self test information.
2. Refer to the service manual regarding Hexadecimal Dumping.
Battery
Status
Lamp
1. If the Batt, LED are Lit, the battery is fully charged.
2. If you can hear beeping sound and LED light is turned off, it means
that the battery is at the lowest level.
3. If the battery is not charged at all, the printer turns off
automatically.
Error
Lamp
function
If the red light is turned on, it means there is no paper roll or the
paper cover is open.
3-2 Battery Installation
3-3 Battery charging
Hook
1. Align battery hook as shown in the picture
2. Push the battery into the printer until it locks in place.
NOTE
As the battery is not charged at the time of your purchase, charge the
battery prior to using the printer
(Battery charger or Cradle can be used to charge)
☞CAUTION
Risk of explosion if battery is replaced by an incorrect type.
Dispose of used batteries according to the instructions
1. Be sure that the printer is turned off
2. After open the DC JACK cover, insert DC JACK into the printer.
3. Plug the power code to electrical outlet.
NOTE
1. Unless the exclusive charger is used provided by the manufacturer, the printer
can be damaged, and the manufacturer is not liable for the consequential damage.
2. Before removing the battery, make sure that power is turned off.
3. Printer does not work in the status of being connected with charger only.
4. The battery should be installed to operate printer.
5. While charging, do not turn on the power.
6. Do not operate the print while charging the battery.
7. Do not connect the charger while the printer is operated.
3-5 Roll Paper installation
3-4 Battery charger usage
Optional
DC Jack
lamp
1. Insert the battery into the battery holder as shown above
2. Connect the DC JACK to the power electrical outlet.
3. Plug the power code into the electrical outlet.
4. Once the charging is completed, remove the battery from the holder.
Press the PUSH button to open
the paper cover
Insert the paper in the right
direction
1 2
3 4
3-5-1 The status of lamp in charging
Status
charging
charging complete
Charging Lamp
Red
Green
NOTE
In the case the battery is not fixed properly in the holder, the red lamp will be
blinking, Then, extract and reinsert the battery.
Pull a short length of paper out of
the printer and close the cover.
Tear off the additional paper using
tear bar.
3-6 Leather case usage
3-7 Self Test
Optional
Open the leather case
Place the printer into the leather
case
1 2
Turn off the power pressing the
power button for approximately
3 seconds.
While you are pressing the FEED
button, press the power button
1 2
NOTE
1. To print ASCII pattern additionally,
press the Feed button once more
2. After printing ASCII pattern, the
self test will be finished automatically.
3. If the Feed button is not pressed
to print ASCII pattern, self test will be
finished automatically after 30 seconds.
Close the Velcro and stick the
cover.
10
The printout is produced.
11
4. Peripherals connection

This product can communicate with other devices via Wifi(802.11b/g)
communication and cable.
4-1 Wifi(802.11b/g) Connection
1. The Printer can be connected to devices equipped with wifi(802.11b/g)
communication capacity (PDAs, PCs, etc.)
2. Use the wifi(802.11b/g) connection function supported by the device to
connect to the printer.
When the printer is installed initially or when you face a problem, you can run the
NOTE
self test and check the information about
Refer to the wifi(802.11b/g) Manual for more details on connection.
-Control Circuit, Mechanism, Print Quality, ROM Version
After checking with self-test and no issues are found, you can examine other
devices and software. This function is working independent of devices and software.
● Motor protection from being overheated
The motor should be stopped and cooled about more than 30 seconds after
continuous printing 1.5 meter
12
13
5. Pritner Specification
4-2 Interface Cable Connection
5-1 Specification
Printing Method
Direct Thermal
Printing Speed
80mm/sec
203 DPI X 203 DPI
Resolution
Character
CPCL
7 Different Font Size (12~48pt)
ESC/POS
Font A (12X24), Font B (9X17)
Character per line
Font A : 48pt , Font B : 64pt
Character set
ALPHA NUMERIC Character, Extension
Character
Barcode
EAN-8, EAN-13, Code39, ITF, UPC-A, UPC-E,
Codabar, Code93, Code128, PDF417(2D),
MAXICode (2D)
Emulation
ESC/POS, CPCL, Commanl Compatible
Driver
Window CE 4.2&5.0, Window Mobile 5.0
Sensor
Paper End Sensor , Gap Sensor , Cover Open
Sensor , Black Mark Sensor
Serial
USB
1. Connect USB or Serial cable into the cable connector on the printer.
paper type
Thermal Paper / Label
NOTE
width
25.4mm ~112mm
Use the cable offered by the manufacturer (USB, Serial)
thickness
0.06mm ~ 0.09mm
External Diameter
Max. Φ56mm
Internal Diameter
12.5mm +/-0.5mm
TPH
50km
Battery
Continuous printing operation: 1hr and 30min
Standby: 24hrs
Printing length: 162m
Paper
2. Connect the interface cable into the USB or Serial port of the device
(PDA, PC, etc.)
Reliability
Serial(RS-232C), USB, Wireless Lan *802.11b/g
Communications
Battery Charger
14
input
AC100~240V, 50/60 Hz
15
6. CPCL Command Compatibility
NOTE
Battery Charger
Size
Battery type
Li-ion
output
7.4V, 2200mAh
Charging time
3 hour 40 minute
W X D X H(mm)
149 X 161 X 69
W X D X H”
5.8 X 6.3 X 2.7
0.53kg (With Battery)
Weight
Temperature
Humidity
operation
-10 ~ 50℃
storage
-20 ~ 60℃
operation
35 ~ 95%
Compatible with only
Partially
Compatible commanders provided Compatible
by the manufacturer.
○
●
Printer Commands
△
Compatibility
PRINT
○
FORM
○
JOURNAL
○
UNITS
○
Comments
TEXT
○
Compatibility
TEXT
○
FONT-GROUP(FG)
○
TEXT CONCATENATION
○
MULTILINE(ML)
○
COUNT
○
SETMAG
○
SCALABLE TEXT
Linear Bar Codes
BARCODE
BARCODE-TEXT
Two-Dimensional Bar Codes
PDF417 (PORTABLE DATA FILE)
16
Not
Compatible
Compatibility
○
○
Compatibility
○
MAXICODE
○
QRCODE
●
DATAMATRIX
●
GS1(RSS)
●
17
Graphics
○
Line Print Mode
LINE
○
SETLP
○
INVERSE-LINE
○
SETLF
○
PATTERN
○
Moving With X and Y Coordinates
○
GRAPHICS
○
LMARGIN
○
PCX
○
SETBOLD
○
SETSP
○
CONTRAST
○
Special ASCII Characters
○
TONE
○
SETFF
○
JUSTIFICATION
○
SET-TOF
○
PAGE-WIDTH
○
SETLP-TIMEOUT
○
PACE
○
NO-PACE
○
WAIT
○
Advanced Commands
REWIND
TENSION
Compatibility
○
SETSP
○
ON-FEED
○
PREFEED
○
POSTFEED
○
PRESENT-AT
COUNTRY/CODE PAGE
○
FORMAT FILES
○
BEEP
○
CUT
PATIAL-CUT
MCR
Compatibility
SPEED
ON-OUT-OF-PAPER
18
Compatibility
BOX
●
19
7. Setting up the software
Please refer to the programming manual included in CD.
♣Certification
FCC Information
This device complies with part 15 of the FCC Results. Operation is subject to
the following two conditions:
(1) This Device may not cause harmful interface, and
(2) This device must accept any interference received, including
interference that may cause undesired operation.
Note
This equipment has been tested and found to comply with the limits for
CLASS B digital device, pursuant to Part 15 of FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment
generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instuctions, may cause harmful interference
to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try correct the
interference by one or more of the following measures:
CAUTION
Antenna shall be mounted in such a manner to minimize the potential for
human contact during normal operation. The antenna should not be contacted
during operation to avoid the possibility of exceeding the FCC radio frequency
exposure limit.
The device meets the FCC requirements for radio
frequency (RF) radiation exposure in the standard body
worn configuration with no minimum configuration. In this
configuration, which applies whether the belt clip or
shoulder strap is used, the face of the printer from which
paper is transported is facing away from the user’s body.
The standard configuration must always be used when the
printer is body worn
1.1. Reorient or relocate the receiving antenna.
1.2. Increase the separation between the equipment and receiver.
1.3. Connect the equipment into an outlet on a circuit different from
that to which receiver is connected.
1.4. Consult the dealer or experienced radio/TV technician for help.
WARNING
Changes or modifications not expressly approved by the manufacturer
could void the user's authority to operate the equipment.
20
21
SEWOO TECH CO.,LTD.
ADDRESS Doosung Bd, 689-20, Kumjung-dong, Kunpo-si, Kyunggi-do, Korea
TEL 82-31-459-8200 FAX 82-31-459-8880
URL http://www.miniprinter.com
Rev. 1.0

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Tagged PDF                      : Yes
XMP Toolkit                     : 3.1-702
Create Date                     : 2009:07:24 14:22:29+09:00
Metadata Date                   : 2009:09:08 11:46:21+09:00
Modify Date                     : 2009:09:08 11:46:21+09:00
Creator Tool                    : Adobe InDesign CS3 (5.0)
Thumbnail Format                : JPEG
Thumbnail Width                 : 256
Thumbnail Height                : 256
Thumbnail Image                 : (Binary data 6542 bytes, use -b option to extract)
Instance ID                     : uuid:a98c5aeb-95ae-41e6-99af-863554b895ae
Document ID                     : adobe:docid:indd:9af84bb6-2282-11de-b934-a651ad89df04
Rendition Class                 : proof:pdf
Derived From Instance ID        : 9af84bb2-2282-11de-b934-a651ad89df04
Derived From Document ID        : adobe:docid:indd:7f6a0673-18dd-11de-b847-e789b301cb3b
Manifest Link Form              : ReferenceStream, ReferenceStream, ReferenceStream
Manifest Placed X Resolution    : 100.00, 150.00, 150.00
Manifest Placed Y Resolution    : 100.00, 150.00, 150.00
Manifest Placed Resolution Unit : Inches, Inches, Inches
Manifest Reference Instance ID  : uuid:7DA8DE2F8322DE11A11DFEF445C3690C, uuid:EB3B654F1BE9DD11B220A206391D7EE5, uuid:EF3B654F1BE9DD11B220A206391D7EE5
Manifest Reference Document ID  : uuid:7CA8DE2F8322DE11A11DFEF445C3690C, uuid:EA3B654F1BE9DD11B220A206391D7EE5, uuid:EE3B654F1BE9DD11B220A206391D7EE5
Format                          : application/pdf
Producer                        : Adobe PDF Library 8.0
Trapped                         : False
Has XFA                         : No
Page Count                      : 13
Creator                         : Adobe InDesign CS3 (5.0)
EXIF Metadata provided by EXIF.tools
FCC ID Filing: WF5LK-P41W

Navigation menu