Arrow AM Series / BM Cutsheet Mortise Locks
BM Series MortiseLocks
User Manual: Arrow AM Series / BM Series Cutsheet Cutsheet
Open the PDF directly: View PDF .
Page Count: 14
Download | |
Open PDF In Browser | View PDF |
21 AM/BM Series Mortise Locks Premier Product Arrow mortise locks are intended for heavy duty use in schools, hospitals and commercial buildings where security, durability and low maintenance are required. They are engineered for strength and performance, and precisely manufactured to exacting standards. Certification / Compliance: u ANSI Meets A156.13 Series 1000, Operational Grade 1. Federal Meets FF-H-106C, Series 86 and 87. UL/ULC Positive Pressure All locks listed for A Label and lesser class doors, 4" (122cm) x 10" (305cm) single or 8" (244cm) x 10" (305cm) pair. Letter F and UL symbol on armored front indicate listing. California State Reference Code All levers with returns comply; levers return to within 1/2" (13mm) of door face. ADA/Americans with Disabilities Act: Acceptable Door Hardware: Section 4.13.9 Handles, pulls, latches and other operating devices on accessible doors shall have a shape that is easy to grasp with one hand and does not require grasping, tight pinching or twisting of the wrist to operate. Lever operated mechanisms, push-type mechanisms and “U” shaped handles are acceptable designs. for the universal symbol next to Arrow products u Look that comply with ADA accessibility requirements. Features: Handing – Handed; field reversible. The lockset can be re-handed without disassembling the lock case. Door Thickness – 1-3/4" (4mm) standard. Backset – 2-3/4" (70mm). Lockcase – Heavy gauge steel, with zinc dichromate finish for corrosion resistance. 5-7/8" (149mm) x 4" (102mm) x 15/16" (24mm). Armored Front – Heavy gauge steel, 8" (203 mm) x 1-1/4" (32mm) x 3/32" (2mm). Accommodates flat doors and doors beveled 1/8" (3mm) in 2" (51mm). Faceplate – Wrought brass, bronze or stainless steel. Attached by machine screws to lockcase front. Latchbolt – Stainless steel, 2 piece mechanical with anti-friction insert. 5/8" (16mm) x 1" (25mm) x 3/4" (19mm) throw. Auxiliary Latchbolt – 9/16" (14mm) effective throw and 3/8" (10mm) effective auxiliary latch deadlocking. Deadbolt – One-piece stainless steel, 19/32" (15mm) x 1 1/4" (32mm) x 1" (25mm) throw. Hub – Knob: nickel steel, 5/16" (8mm) and 9/32". Lever: nickel steel, 5/16" (8mm). Spacing – Center to center, hub to cylinder: 3-5/8" (92mm). Center to center, hub to turnpiece 2-7/16" (62 mm). Strike – Wrought brass, bronze or stainless steel. ANSI straight lip standard, 4-7/8" (124mm) x 1-1/4" (32mm) 1-1/8" (29mm) lip to center. Optional strikes, lip lengths and ANSI wrought strike box available. Keys – Two nickel silver standard. Keying Features Available: • Master keying • Construction master keying • Visual key control • Concealed key control • Interchangeable core (IC) - Pointe, Choice Base, Plus, and Flex Warranty – Five-year limited. Standardized Case – One size case for uniform mortising. Reversibility – Locks are easily reversed for change of hand. Self Aligning Trim – Standard with rose trim. Eliminates bind, facilitates installation, gives support and saves labor. Designs – Broad spectrum of designs including lever handles, knobs for roses and escutcheons in architectural finishes. Complete Range of Functions – To meet all requirements. 22 AM/BM Series Mortise Locks Premier Product AM Series BM Series Finishes: 1 5 2 6 3 7 4 8 BHMA U.S. Equivalent Arrow Equivalent Finish 1 605 US3 03 Bright Brass 2 606 US4 04 Satin Brass 3 612 US10 10 Satin Bronze 4 613 US10B 10B Dark Oxide Bronze, Oil Rubbed 5 625 US26 26 Bright Chromium Plated 6 626 US26D 26D Satin Chromium Plated 7 629 US32 32 Bright Stainless Steel 8 630 US32D 32D Satin Stainless Steel Applications: Advantages: Arrow mortise locks are offered in a complete range of functions designed for commercial, institutional and industrial applications. They are engineered for strength and performance, and precisely manufactured to exacting standards. A wide selection of trim designs and functions are offered which meet or exceed the performance requirements of ANSI Grade 1. • Easily reversible, enabling the user to reverse hands without disassembling lock case. • Meets or exceeds ANSI operational Grade 1 requirements. • Throughbolted trim designs for proper alignment and increased security. • Many trim designs to complement Arrow cylindrical locks and exit device trims. • Keyed into new or existing Arrow or competitive master key systems. Arrow mortise locks can be found in the following types of facilities: * Note: Not all trim designs available in all finishes. • Schools • Office Buildings Facilities • Multi-Family Housing • Hospitals • Government 23 AM/BM Series Mortise Locks Premier Product AM SERIES BM SERIES ARROW FUNCTION ANSI/ FEDERAL # 01 Passage F01/86N Latchbolt by knob/lever either side 02 Privacy F19/86L 07 Exit Latchbolt by knob/lever either side, except when outside is locked by turnpiece inside. Outside emergency release or operating from inside unlocks lock. Inside knob/lever retracts both bolts. Latchbolt by knob/lever inside. Auxiliary latchbolt deadlocks latchbolt. No outside trim. 08 Single Dummy Trim Rigid knob/lever one side of door only. Plug through edge of door ensures stability. 09 Double Dummy Trim Rigid knob/lever both sides of door. Plug through edge of door ensures stability. 11 Apartment/Front Door F12/86F 12 Storeroom F07/86EW 13 Apartment/Front F21/86B Door 15 Hotel F15/86H 16 Hotel F15/86H DESCRIPTION Latchbolt by knob/lever either side except when outside knob/lever is locked by stopworks in lock front, or when the deadbolt is projected. Deadbolt operates by key outside and turnpiece inside. Turning inside knob/lever will retract latchbolt and deadbolt simultaneously. Outside knob/lever always rigid. Latchbolt retracted only by key outside or by inside knob/lever. Auxiliary latchbolt deadlocks latchbolt. Latchbolt operated by knob/lever either side. Deadbolt operated by key outside and turnpiece inside. When deadbolt is projected, key outside will retract deadbolt, then latchbolt. Inside knob/lever always free, while outside knob/lever is always rigid. Latchbolt operated by knob/lever inside and by key outside. All keys except emergency keys are shut out when deadbolt is projected by turnpiece inside. Turning inside knob/lever will retract both the deadbolt and the latchbolt simultaneously. Auxiliary latchbolt deadlocks latchbolt. Furnished with visual indicator button. Inside knob/lever always free, while outside knob/lever is always rigid. Latchbolt operated by knob/lever inside and by key outside. All keys except emergency keys are shut out when deadbolt is projected by turnpiece inside. Turning inside knob/lever will retract both the deadbolt and the latchbolt simultaneously. Auxiliary latchbolt deadlocks latchbolt. 24 AM/BM Series Mortise Locks Premier Product ARROW FUNCTION ANSI/ FEDERAL # 17 Classroom F05/86J 19 Dormitory/Exit F13/86FW 20 Entrance/ Dormitory F20 21 Front Door F08,F10/86A 22 Office F04/86E 23 Vestibule 24 Storeroom 26 Privacy 27 Institutional 31 Storeroom AM SERIES BM SERIES DESCRIPTION Latchbolt operated by knob/lever either side, except when outside knob/lever is locked by key outside. Key operates latch or unlocks outside knob/ lever. Inside knob/lever is always free. Auxiliary latchbolt deadlocks latchbolt. Latchbolt operated by knob/lever either side. When outside knob/lever is locked by projected deadbolt, (by inside turnpiece or outside key) key outside will retract deadbolt, then latchbolt. Turning inside knob/lever will retract latchbolt and deadbolt simultaneously, which will unlock outside knob/lever. When deadbolt is projected, the latchbolt is deadlocked. Latchbolt operated by knob/lever either side, except when outside knob/lever is locked by stopworks in lock front, or by projecting deadbolt by turnpiece inside or key outside. Turning inside knob/lever will retract latchbolt and deadbolt simultaneously. Deadbolt operated by turnpiece inside or key outside. When deadbolt is projected the latchbolt is deadlocked. Auxiliary latchbolt deadlocks latchbolt. Latchbolt operated by knob/lever either side except when outside knob/lever is locked by stopworks in lock front. Deadbolt is operated by turnpiece inside. Auxiliary latchbolt deadlocks latchbolt. Key outside operates both bolts. Latchbolt operated by knob/lever either side except when outside knob/lever is locked by stopworks in lock front then operated by key outside. Auxiliary latchbolt deadlocks latchbolt. Latchbolt operated by knob/lever either side, except when outside knob/lever is locked by stopworks in lock front, then operated by key outside. Latchbolt operated by knob/lever inside and by key outside. Outside knob/lever always rigid. Inside knob/lever always free. F22/86L F14/86C Latchbolt by knob/lever either side, except when outside is locked by turnpiece inside. Operating inside knob/lever, closing door, or with outside emergency release unlocks outside. Latchbolt by knob/lever either side, except when Privacy outside is locked by turnpiece inside. Operating inside knob/lever or closing door unlocks outside. Key outside retracts latch at all times, even if thumbturn is held in locked position. Auxiliary latch deadlocks latchbolt. Latchbolt operated by knob/lever either side. Deadbolt is operated by key from either side. When deadbolt is projected, key either side will retract deadbolt, then latchbolt. 25 AM/BM Series Mortise Locks Premier Product AM SERIES BM SERIES ARROW FUNCTION ANSI/ FEDERAL # 32 Vestibule F09/86G 33 Storeroom F30 34 Storeroom F35 37 Classroom F32 38 Classroom 40 Deadlock F18/86S 41 Deadlock F17/86P Deadbolt operated by key outside and turnpiece inside. (No trim) 42 Deadlock F16/86T Deadbolt operated by key from either side. (No trim) 44 Classroom Deadlock DESCRIPTION Latchbolt operated by knob/lever either side, except when outside knob/lever is locked by key from the inside cylinder. When outside knob/lever is locked, latchbolt is retracted by key outside or by knob/lever inside. Auxiliary latchbolt deadlocks latchbolt. Both knobs/levers rigid at all times. Auxiliary latchbolt deadlocks latchbolt. Latchbolt operated only by key from either side. Latchbolt operated by knob/lever either side except when the outside knob/lever is locked by stop works in lock front then operated by key outside or by knob/lever inside. Deadbolt operated by key from either side. Latchbolt by knob/lever either side. Except when outside is locked from inside or outside by key. When outside is locked, latchbolt is retracted by key from inside or outside or by operating inside knob/lever. Auxiliary latch deadlocks latchbolt. Latchbolt by lever from either side unless outside lever is locked by projection of deadbolt. Deadbolt thrown by key from either side. Inside lever simultaneously retracts latchbolt and deadbolt, outside lever remains locked. Retracting latchbolt by key unlocks outside lever. Auxiliary latch deadlocks latchbolt. Deadbolt operated only by key outside. (No trim) Deadbolt by key outside. Turnpiece will retract but will not project bolt. Electrical Lock Functions: AM17/BM17 SUFFIX VOLTAGE CURRENT DESCRIPTION 177 179 12V AC/DC 24V AC/DC 612mA 330mA FAIL SAFE: Power on locks outside lever. Inside lever always free. Latch retracted by key when locked electrically. 181 183 12V AC/DC 24V AC/DC 612mA 330mA FAIL SECURE: Power off locks outside lever. Inside lever always free. Latch retracted by key when locked electrically. 26 AM/BM Series Mortise Locks Premier Product Reversing Hand: Mortise Locksets AM/BM Series Please read completely before proceeding and review the drawing below. Minimal force is required to reverse handing. 1. Remove the armored front. 2. Remove the lockset from the door. 3. Fully depress the latchbolt and hold in the depressed position. 4. With minimal force, depress the catch plate, located at the end of the latchtail, through the oblong cutout in the lockcase cap. While depressing the catch plate, release the latchbolt and remove latch from the lock. 5. Turn the latchbolt over and reinstall into the lock. 6. Depress the latchbolt until it re-engages the tail socket. 7. Remove the red headed screw from the stopworks and place it in the stopworks on the opposite side of the case. 8. Loosen the front screw to change the bevel. Tighten the front screws. 9. Reinstall the lock and armored front into the door. 10. If changing bevel only, i.e. RH to RHR. Omit step 7. Depress Latchbolt Front Screw Front Screw Depress the Catch Plate Red-Headed Screw 27 AM/BM Series Mortise Locks – AM Series Knob Designs Premier Product 21⁄4" 57.15 mm 71⁄2" 190.5 mm 21⁄4" 57.15 mm 31⁄8" 29⁄16" 79.37 mm 65.08 mm 25⁄8" 2 ⁄16" HBHA 9 HBHD 65.08 mm 21⁄4" 57.15 mm Knob: HB Rose: HD Heavy Wrought Brass, Bronze or Stainless Steel 66.67 mm 2 ⁄16" 9 65.08 mm Knob: HB Rose: HA Heavy Wrought Brass, Bronze or Stainless Steel Also Available with HB Rose 21⁄4" HBG 57.15 mm Knob: HB Rose: G Wrought Brass, Bronze or Stainless Steel 21⁄4" 57.15 mm 8" 203.2 mm 21⁄4" 57.15 mm 3" 3" 76.2 mm 76.2 mm 2 ⁄4" 1 57.15 mm HBH Knob: HB Escutcheon: H Heavy Wrought Knob Wrought Escutcheon Brass, Bronze or Stainless Steel 29⁄16" 65.08 mm 21⁄4" HTHA 57.15 mm Knob: HT Rose: HA Heavy Wrought Brass or Bronze HTHD 29⁄16" 65.08 mm 21⁄4" Knob: HT Rose: HD Heavy Wrought Brass, Bronze or Stainless Steel 57.15 mm 21⁄4" 21⁄4" 57.15 mm 57.15 mm 71⁄2" 8" 190.5 mm 203.2 mm 21⁄4" 21⁄4" 57.15 mm 57.15 mm 3" 76.2 mm HTHB 31⁄4" 82.55 mm Knob: HT Rose: HB Heavy Wrought Brass, Bronze or Stainless Steel 21⁄4" 57.15 mm 27⁄8" 27⁄8" 53.15 mm 73.02 mm HTG Knob: HT Escutcheon: G Wrought Escutcheon Brass, Bronze or Stainless Steel HTH Knob: HT Escutcheon: H Heavy Wrought Knob Wrought Escutcheon Brass, Bronze or Stainless Steel 28 AM/BM Series Mortise Locks – AM Series Knob Designs Premier Product 21⁄4" 21⁄4" 57.15 mm 57.15 mm 71⁄2" 8" 190.5 mm 203.2 mm 21⁄8" 21⁄8" 53.97 mm 53.97 mm 31⁄8" 79.37 mm BD 29⁄16" 25⁄8" 23⁄8" 66.67 mm 60.32 mm 21⁄8" 65.08 mm Knob: B Rose: D Wrought Brass or Bronze Also Available with Rose BG BH Knob: B Escutcheon: G Wrought Brass or Bronze Knob: B Escutcheon: H Wrought Brass or Bronze 53.97 mm A 21⁄4" 21⁄4" 57.15 mm 57.15 mm 71⁄2" 8" 190.5 mm 203.2 mm 21⁄8" 21⁄8" 53.97 mm 53.97 mm 27⁄16" 61.91 mm 213⁄32" TA 29⁄16" 213⁄32" 61.11 mm 65.08 mm 21⁄8" Knob: T Rose: A Wrought Brass or Bronze Also Available with Rose D 53.97 mm 61.11 mm TG TH Knob: T Escutcheon: G Wrought Brass or Bronze Knob: T Escutcheon: H Wrought Brass or Bronze 29 AM/BM Series Mortise Locks – BM Series Lever Designs Premier Product Broadway: 21⁄4" u 21⁄4" u 57.15 mm 71⁄2" 8" 190.5 mm 203.2 mm 21⁄4" 57.15 mm 215⁄16" 43⁄4" 74.61 mm 120.65 mm 5 2 ⁄8" 4 ⁄4" 66.67 mm 120.65 mm u 57.15 mm 3 25⁄8" 43⁄4" 66.67 mm 120.65 mm BRL BRG BRH Lever: BR - Cast Rose: L - Wrought Brass, Bronze or Stainless Steel Lever: BR - Brass or Bronze Escutcheon: G - Brass or Bronze or Stainless Steel Lever: BR - Cast Escutcheon: H - Wrought Brass, Bronze or Stainless Steel Hastings: 21⁄4" u 21⁄4" u 57.15 mm u 57.15 mm 8" 71⁄2" 203.2 mm 190.5 mm 21⁄4" 57.15 mm 215⁄16" 43⁄4" 74.61 mm 120.65 mm 25⁄8" 4 ⁄4" 66.67 mm 120.65 mm 25⁄8" 43⁄4" 66.67 mm 120.65 mm 3 HSL HSG HSH Lever: HS - Cast Rose: L - Brass, Bronze or Stainless Steel Lever: HS - Cast Escutcheon: G - Wrought Brass, Bronze or Stainless Steel Lever: HS - Cast Escutcheon: H - Wrought Brass, Bronze or Stainless Steel Javelin: 21⁄4" u 21⁄4" u 57.15 mm 71⁄2" u 57.15 mm 8" 190.5 mm 203.2 mm 21⁄4" 21⁄4" 4" 57.15 mm 101.60 mm 57.15 mm 21⁄4" 4" 57.15 mm 101.60 mm JL Lever: J - Forged Brass or Cast Bronze Rose: L - Wrought Brass or Bronze 21⁄4" 43⁄4" 57.15 mm 120.65 mm JG JH Lever: J - Forged Brass or Cast Bronze Escutcheon: G - Wrought Brass, Bronze or Stainless Steel Lever: J - Forged Brass or Cast Bronze Escutcheon: H - Wrought Brass, Bronze or Stainless Steel 30 AM/BM Series Mortise Locks – BM Series Lever Designs Premier Product Neo: 21⁄4" u 21⁄4" u 57.15 mm u 57.15 mm 71⁄2" 8" 190.5 mm 203.2 mm 21⁄4" 25⁄8" 4" 25⁄8" 4" 57.15 mm 66.67 mm 101.60 mm 66.67 mm 101.6 mm 25⁄8" 4" 66.67 mm 101.60 mm NL NG NH Lever: N - Brass, Bronze or Stainless Steel Rose: L - Brass, Bronze or Stainless Steel Lever: N - Brass, Bronze or Stainless Steel Escutcheon: G - Brass, Bronze or Stainless Steel Lever: N - Brass, Bronze or Stainless Steel Escutcheon: H - Brass, Bronze or Stainless Steel Ventura: 21⁄4" u 71⁄2" 8" 203.2 mm 21⁄4" 25⁄8" 43⁄4" 120.65 mm 25⁄8" 43⁄4" 66.67 mm 120.65 mm u 57.15 mm 190.5 mm 57.15 mm 66.67 mm 21⁄4" u 57.15 mm 25⁄8" 43⁄4" 66.67 mm 120.65 mm VL VG VH Lever: V - Forged Brass, Cast Bronze or Stainless Steel Rose: L - Wrought Brass, Bronze or Stainless Steel Lever: V - Forged Brass, Cast Bronze or Stainless Steel Escutcheon: G - Wrought Brass, Bronze or Stainless Steel Lever: V - Forged Brass, Cast Bronze or Stainless Steel Escutcheon: H - Wrought Brass, Bronze or Stainless Steel Wave: 21⁄4" u 71⁄2" 21⁄4" 215⁄16" 41⁄2" 74.6 mm 114.3 mm u 57.15 mm 8" 190.5 mm 57.15 mm 21⁄4" u 57.15 mm 203.2 mm 215⁄16" 41⁄2" 74.6 mm 114.3 mm 215⁄16" 41⁄2" 74.6 mm 114.3 mm WL WG WH Lever: W - Brass, Bronze or Stainless Steel Rose: L - Brass, Bronze or Stainless Steel Lever: W - Brass, Bronze or Stainless Steel Escutcheon: G - Brass, Bronze or Stainless Steel Lever: W - Brass, Bronze or Stainless Steel Escutcheon: H - Brass, Bronze or Stainless Steel 31 AM/BM Series Mortise Locks – BM Series Lever Designs Premier Product Xavier: 21⁄4" u 21⁄4" 57.15 mm 21⁄2" 43⁄4" 63.5 mm 120.65 mm XL Lever: X - Forged Brass, Cast Bronze or Stainless Steel Escutcheon: L - Wrought Brass, Bronze or Stainless Steel 21⁄4" u 57.15 mm 71⁄2" 8" 190.5 mm 203.2 mm 25⁄8" 43⁄4" 66.67 mm 120.65 mm 21⁄2" XG XH Lever: X - Forged Brass, Cast Bronze or Stainless Steel Escutcheon: G - Wrought Brass, Bronze or Stainless Steel Lever: X - Forged Brass, Cast Bronze or Stainless Steel Escutcheon: H - Wrought Brass, Bronze or Stainless Steel ANSI Straight Lip (standard) • Brass or bronze • Non-handed • 4-7/8" (124mm) x 1-1/4" (32mm) x 1-1/8" (29mm) lip to center • Optional lip lengths: 7/8" (22mm), 1-1/4" (32mm), 1-3/8" (35mm), 1-1/2" (38mm), 1-3/4" (44mm), 2" (51mm), 2-1/4" (57mm), 2-1/2" (64mm), 2-3/4" (70mm), 3" (76mm) ANSI Curved Lip • Brass or bronze • Handed • 4-7/8" (124mm) x 1-1/4" (32mm) x 1-1/4" (32mm) lip to center • Optional lip lengths: 1-3/8" (35mm), 1-1/2" (38mm) 1-3/4" (44mm), 2" (51mm), 2-1/4" (57mm), 2-1/2" (64mm), 2-3/4" (70mm), 3" (76mm) DESCRIPTION Latchbolt x Deadbolt Functions: 02,11,13,15,16, 19,20,21,31,34,38 460 468 466 Straight Lip Curved Lip for RH Curved Lip for LH Latchbolt Only Functions: 01,07,12,17,22,23, 24,26,27,32,33,37 463 464 462 Straight Lip Curved Lip for RH Curved Lip for LH Deadbolt Only Functions: 40,41,42,44 456 Straight Lip Note: Straight lip strikes are standard. Specify if curved lip strike is required. 43⁄4" 66.67 mm 120.65 mm Strikes: PART NO. u 57.15 mm 32 AM/BM Series Mortise Locks Premier Product Cylinder: Cylinder • MC61 - 1-1/8" for 1-3/4" door. Collar-16-113A • Hotel Cylinder For function 15 and 16. MCH61 - 1-18" for 1-3/4" door. Collar-16-113A • Finishes - 3, 4, 10, 10B, 26, 26D. Cylinder Collars: I.C. Mortise Cylinder Collar 16-113A (Standard for 16CR-14, 16CR-26, 16CRH-26) Cylinder for Interchangeable Core • 16CR-16 - 6pin-1-1/8" • 16CR-27 - 6 or 7 pin 1-1/4" • 16CRH-26 - 6 pin, hotel • Collar - 16 -113A • Finishes - 3, 4, 10, 10B, 26, 26D Spacer Rings: I.C. Rim Cylinder Collar 16RC-113 (Standard for 16RCR-16, 16RCR-27) Thumb Turn 16-17A: • Furnished with rose trim. For escutcheon trim, thumb turn is mounted on escutcheon. • Finishes - 3, 4, 10, 10B, 26, 26D. 16CR-123-1 1/8" Thick 16CR-123-2 1/4" Thick 16CR-123-3 (Standard for 16RCH-26) 3/8" Thick Cams: 001 Used with functions 12, 17, 22, 23, 24, 27, 32 (I/S), 33, 37. AM2 Used with deadbolt functions 11, 13, 15, 16, 19, 20, 21, 31, 32 (O/S), 34, 38, 40, 41, 42, 44 . 33 AM/BM Series Mortise Locks Premier Product Face Plates (Scalps): Part No. AM-15-305 Part No. AM11-305 Part No. AM12-305 Part No. AM02-305 Function 15, 16, 38 Function 11, 21, 34 Function 07, 12, 17 27, 32, 33, 37 Function 02, 13, 19, 31 Part No. AM22-305 Part No. AM23-305 Part No. AM41-305 Part No. AM01-305 Part No. AM20-305 Function 22 Function 23 Function 40, 41, 42, 44 Function 01, 24, 26 Function 20 Spindles: Knob Spindle AM 385A–For trim with “H” escutcheon AM 386A–For trim with “G” escutcheon and all rose trim Lever Spindle BM 385A–For trim with “H” escutcheon and rose trim BM 386A–For trim with “G” escutcheon NOTE: AM 385A–Inside half-P/N-16-385 Outside half-P/N-BM-383 AM 386A–Inside half-P/N-16-385 Outside half-P/N-BM-383-2 NOTE: BM 385A–Inside half (assembly with screw) 17S-384A Outside half-BM-383 BM 386A–Inside half (assembly with screw) 17S-385A Outside half-BM-383-2 34 AM/BM Series Mortise Locks Premier Product Suggested Specification AM/BM: All locksets shall be Mortise Locksets as supplied by Arrow Lock company. Locks shall have all functions available in one size case, manufactured from heavy gauge steel, minimum thickness 3/32", chrome plated for corrosion resistance and lubricity of parts. The handing of all locks shall be reversible without the disassembly of the lockcase. Cases are to be closed on all sides to protect internal parts. Locks are to have adjustable, beveled and armored fronts, standard 2-3/4" backset, a full 3/4" throw two-piece mechanical anti-friction latchbolt, and a one-piece stainless steel 1" throw deadbolt, and shall be available for a minimum door thickness of 1-3/8". Internal parts shall be heavy gauge steel, zinc dichromate plated for corrosion resistance. Certification: UBC-7(1997) and UL10C-Positive Pressure Federal Specification FF0H-106G ANSI A156.13 Series 1000, Operational Grade 1 ANSI A117.1, Accessibility Code, 1989 (Formerly Tile 19, California State Fire Marshal Standard) (lever handle trim). All locks, trim, and cylinders shall be from one manufacturer. All locksets shall carry a five-year limited warranty. All locksets with latchbolts, regardless of trim, shall be listed by Underwriters Laboratories for A label and lesser class doors, 4' x 10' single or 8' x 10' pair. Cylinder options shall include interchangeable core. Lock trim (knob, lever, sectional or escutcheon) shall be throughbolted through the lockcase to assure correct alignment and proper operation. Order Example: Example: To order a AM Series Apartment function Mortise lock with HTHA design, satin chrome finish, with a straight lip strike, right handed, keyed different. Specify: Standard: AM 11 HTHA 26D 460 RH KD XXX Keying (if required) Options Handing Strike Finish Design Function Series
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Create Date : 2012:07:02 09:09:34-04:00 Creator : QuarkXPress(R) 7.5 Modify Date : 2012:07:02 09:09:41-04:00 Has XFA : No XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04 Metadata Date : 2012:07:02 09:09:41-04:00 Creator Tool : QuarkXPress(R) 7.5 Format : application/pdf Title : Layout 1 Document ID : uuid:384c4b42-cf7e-45ba-a6c7-277f5e962c02 Instance ID : uuid:56ad4e67-f480-42c5-a576-b0775a62cefc Producer : QuarkXPress(R) 7.5 Page Count : 14EXIF Metadata provided by EXIF.tools