Arrow AM Series / BM Cutsheet Mortise Locks

BM Series MortiseLocks

User Manual: Arrow AM Series / BM Series Cutsheet Cutsheet

Open the PDF directly: View PDF PDF.
Page Count: 14

21
Features:
Arrow mortise locks are intended for heavy duty
use in schools, hospitals and commercial buildings
where security, durability and low maintenance
are required. They are engineered for strength and
performance, and precisely manufactured to exacting
standards.
Certification/Compliance:
ANSI
Meets A156.13 Series 1000, Operational Grade 1.
Federal
Meets FF-H-106C, Series 86 and 87.
UL/ULC Positive Pressure
All locks listed for A Label and lesser class doors, 4" (122cm) x 10"
(305cm) single or 8" (244cm) x 10" (305cm) pair. Letter F and UL
symbol on armored front indicate listing. California State
Reference Code All levers with returns comply; levers return to
within 1/2" (13mm) of door face.
Handing – Handed; field reversible. The lockset can be re-handed
without disassembling the lock case.
Door Thickness – 1-3/4" (4mm) standard.
Backset – 2-3/4" (70mm).
Lockcase – Heavy gauge steel, with zinc dichromate finish for
corrosion resistance. 5-7/8" (149mm) x 4" (102mm) x 15/16"
(24mm).
Armored Front – Heavy gauge steel, 8" (203 mm) x 1-1/4"
(32mm) x 3/32" (2mm). Accommodates flat doors and doors
beveled 1/8" (3mm) in 2" (51mm).
Faceplate – Wrought brass, bronze or stainless steel. Attached by
machine screws to lockcase front.
Latchbolt – Stainless steel, 2 piece mechanical with anti-friction
insert. 5/8" (16mm) x 1" (25mm) x 3/4" (19mm) throw.
Auxiliary Latchbolt – 9/16" (14mm) effective throw and 3/8"
(10mm) effective auxiliary latch deadlocking.
Deadbolt – One-piece stainless steel, 19/32" (15mm) x 1 1/4"
(32mm) x 1" (25mm) throw.
Hub – Knob: nickel steel, 5/16" (8mm) and 9/32". Lever: nickel
steel, 5/16" (8mm).
Spacing – Center to center, hub to cylinder: 3-5/8" (92mm).
Center to center, hub to turnpiece 2-7/16" (62 mm).
Strike – Wrought brass, bronze or stainless steel. ANSI straight lip
standard, 4-7/8" (124mm) x 1-1/4" (32mm) 1-1/8" (29mm) lip
to center. Optional strikes, lip lengths and ANSI wrought strike
box available.
Keys – Two nickel silver standard.
Keying Features Available:
• Master keying
• Construction master keying
• Visual key control
• Concealed key control
• Interchangeable core (IC) - Pointe, Choice Base,
Plus, and Flex
Warranty – Five-year limited.
Standardized Case – One size case for uniform mortising.
Reversibility – Locks are easily reversed for change of hand.
Self Aligning Trim–Standard with rose trim. Eliminates bind,
facilitates installation, gives support and saves labor.
Designs – Broad spectrum of designs including lever handles,
knobs for roses and escutcheons in architectural finishes.
Complete Range of Functions – To meet all requirements.
u
ADA/Americans with Disabilities Act:
Acceptable Door Hardware: Section 4.13.9
Handles, pulls, latches and other operating devices on accessible doors
shall have a shape that is easy to grasp with one hand and does not
require grasping, tight pinching or twisting of the wrist to operate. Lever
operated mechanisms, push-type mechanisms and “U” shaped handles
are acceptable designs.
Look for the universal symbol next to Arrow products
that comply with ADA accessibility requirements.
u
AM/BM Series Mortise Locks
Premier Product
22
Finishes: U.S. Arrow
BHMA Equivalent Equivalent Finish
605 US3 03 Bright Brass
606 US4 04 Satin Brass
612 US10 10 Satin Bronze
613 US10B 10B Dark Oxide Bronze, Oil Rubbed
625 US26 26 Bright Chromium Plated
626 US26D 26D Satin Chromium Plated
629 US32 32 Bright Stainless Steel
630 US32D 32D Satin Stainless Steel
1
2
3
4
5
6
7
8
1 2 3 4
65 7 8
Applications:
Arrow mortise locks are offered in a complete range
of functions designed for commercial, institutional
and industrial applications. They are engineered
for strength and performance, and precisely
manufactured to exacting standards.
A wide selection of trim designs and functions are
offered which meet or exceed the performance
requirements of ANSI Grade 1.
Arrow mortise locks can be found in the following
types of facilities:
• Schools • Hospitals
• Office Buildings • Government
Facilities
• Multi-Family Housing
Advantages:
• Easily reversible, enabling the user to reverse hands
without disassembling lock case.
• Meets or exceeds ANSI operational Grade 1 requirements.
• Throughbolted trim designs for proper alignment and increased security.
• Many trim designs to complement Arrow cylindrical
locks and exit device trims.
• Keyed into new or existing Arrow or competitive
master key systems.
* Note: Not all trim designs available in all finishes.
AM/BM Series Mortise Locks
Premier Product
AM Series BM Series
23
AM/BM Series Mortise Locks
Premier Product
01 Passage F01/86N Latchbolt by knob/lever either side
02 Privacy F19/86L Latchbolt by knob/lever either side, except when
outside is locked by turnpiece inside. Outside
emergency release or operating from inside
unlocks lock. Inside knob/lever retracts both bolts.
07 Exit Latchbolt by knob/lever inside. Auxiliary latchbolt dead-
locks latchbolt. No outside trim.
08 Single Dummy Rigid knob/lever one side of door only. Plug
Trim through edge of door ensures stability.
09 Double Dummy Rigid knob/lever both sides of door. Plug through
Trim edge of door ensures stability.
11 Apartment/Front F12/86F Latchbolt by knob/lever either side except when
Door outside knob/lever is locked by stopworks in lock
front, or when the deadbolt is projected. Deadbolt oper-
ates by key outside and turnpiece inside. Turning inside
knob/lever will retract latchbolt and deadbolt simultane-
ously.
12 Storeroom F07/86EW Outside knob/lever always rigid. Latchbolt retracted only
by key outside or by inside knob/lever. Auxiliary latchbolt
deadlocks latchbolt.
13 Apartment/Front F21/86B Latchbolt operated by knob/lever either side.
Door Deadbolt operated by key outside and turnpiece inside.
When deadbolt is projected, key outside
will retract deadbolt, then latchbolt.
15 Hotel F15/86H Inside knob/lever always free, while outside knob/lever is
always rigid. Latchbolt operated by knob/lever inside and
by key outside. All keys except emergency keys are shut out
when deadbolt is projected by turnpiece inside. Turning
inside knob/lever will retract both the deadbolt and the
latchbolt simultaneously. Auxiliary latchbolt deadlocks
latchbolt. Furnished with visual indicator button.
16 Hotel F15/86H Inside knob/lever always free, while outside knob/lever is
always rigid. Latchbolt operated by knob/lever inside and by
key outside. All keys except emergency keys are shut out
when deadbolt is projected by turnpiece inside. Turning
inside knob/lever will retract both the deadbolt and the
latchbolt simultaneously. Auxiliary latchbolt deadlocks
latchbolt.
ANSI/ AM BM
ARROW FUNCTION FEDERAL # SERIES SERIES DESCRIPTION
24
AM/BM Series Mortise Locks
Premier Product
17 Classroom F05/86J Latchbolt operated by knob/lever either side, except when
outside knob/lever is locked by key outside. Key operates
latch or unlocks outside knob/lever. Inside knob/lever is
always free. Auxiliary latchbolt deadlocks latchbolt.
19 Dormitory/Exit F13/86FW Latchbolt operated by knob/lever either side. When out-
side knob/lever is locked by projected deadbolt, (by inside
turnpiece or outside key) key outside will retract deadbolt,
then latchbolt. Turning inside knob/lever will retract latch-
bolt and deadbolt simultaneously, which will unlock outside
knob/lever. When deadbolt is projected, the latchbolt is
deadlocked.
20 Entrance/ F20 Latchbolt operated by knob/lever either side, except when
Dormitory outside knob/lever is locked by stopworks in lock front,
or by projecting deadbolt by turnpiece inside or key outside.
Turning inside knob/lever will retract latchbolt and deadbolt
simultaneously. Deadbolt operated by turnpiece inside or
key outside. When deadbolt is projected the latchbolt is
deadlocked. Auxiliary latchbolt deadlocks latchbolt.
21 Front Door F08,F10/86A Latchbolt operated by knob/lever either side except when
outside knob/lever is locked by stopworks in lock front.
Deadbolt is operated by turnpiece inside. Auxiliary latch-
bolt deadlocks latchbolt. Key outside operates both bolts.
22 Office F04/86E Latchbolt operated by knob/lever either side except when
outside knob/lever is locked by stopworks in lock front then
operated by key outside. Auxiliary latchbolt deadlocks
latchbolt.
23 Vestibule Latchbolt operated by knob/lever either side, except when
outside knob/lever is locked by stopworks in lock front,
then operated by key outside.
24 Storeroom Latchbolt operated by knob/lever inside and by key out-
side. Outside knob/lever always rigid. Inside knob/lever
always free.
26 Privacy F22/86L Latchbolt by knob/lever either side, except when outside is
locked by turnpiece inside. Operating inside knob/lever,
closing door, or with outside emergency release unlocks
outside.
27 Institutional Latchbolt by knob/lever either side, except when
Privacy outside is locked by turnpiece inside. Operating
inside knob/lever or closing door unlocks outside.
Key outside retracts latch at all times, even if thumbturn is
held in locked position. Auxiliary latch deadlocks latchbolt.
31 Storeroom F14/86C Latchbolt operated by knob/lever either side. Deadbolt
is operated by key from either side. When deadbolt is
projected, key either side will retract deadbolt, then
latchbolt.
ANSI/ AM BM
ARROW FUNCTION FEDERAL # SERIES SERIES DESCRIPTION
25
AM/BM Series Mortise Locks
Premier Product
32 Vestibule F09/86G Latchbolt operated by knob/lever either side, except when
outside knob/lever is locked by key from the inside
cylinder. When outside knob/lever is locked, latchbolt
is retracted by key outside or by knob/lever inside.
Auxiliary latchbolt deadlocks latchbolt.
33 Storeroom F30 Both knobs/levers rigid at all times. Auxiliary latchbolt
deadlocks latchbolt. Latchbolt operated only by key
from either side.
34 Storeroom F35 Latchbolt operated by knob/lever either side except
when the outside knob/lever is locked by stop works in
lock front then operated by key outside or by knob/lever
inside. Deadbolt operated by key from either side.
37 Classroom F32 Latchbolt by knob/lever either side. Except when
outside is locked from inside or outside by key. When
outside is locked, latchbolt is retracted by key from
inside or outside or by operating inside knob/lever.
Auxiliary latch deadlocks latchbolt.
38 Classroom Latchbolt by lever from either side unless outside lever
is locked by projection of deadbolt. Deadbolt thrown by
key from either side. Inside lever simultaneously
retracts latchbolt and deadbolt, outside lever remains
locked. Retracting latchbolt by key unlocks outside
lever. Auxiliary latch deadlocks latchbolt.
40 Deadlock F18/86S Deadbolt operated only by key outside.
(No trim)
41 Deadlock F17/86P Deadbolt operated by key outside and turnpiece
inside. (No trim)
42 Deadlock F16/86T Deadbolt operated by key from either side.
(No trim)
44 Classroom Deadbolt by key outside. Turnpiece will retract
Deadlock but will not project bolt.
ANSI/ AM BM
ARROW FUNCTION FEDERAL # SERIES SERIES DESCRIPTION
177 12V AC/DC 612mA
179 24V AC/DC 330mA
181 12V AC/DC 612mA
183 24V AC/DC 330mA
AM17/BM17
SUFFIX VOLTAGE CURRENT DESCRIPTION
Electrical Lock Functions:
FAIL SAFE:
Power on locks outside lever. Inside
lever always free. Latch retracted by key when
locked electrically.
FAIL SECURE:
Power off locks outside lever.
Inside lever always free. Latch retracted by key
when locked electrically.
26
AM/BM Series Mortise Locks
Premier Product
Mortise Locksets AM/BM Series
Please read completely before proceeding and review
the drawing below.
Minimal force is required to reverse handing.
1. Remove the armored front.
2. Remove the lockset from the door.
3. Fully depress the latchbolt and hold in the
depressed position.
4. With minimal force, depress the catch plate, located
at the end of the latchtail, through the oblong cutout
in the lockcase cap. While depressing the catch plate,
release the latchbolt and remove latch from the lock.
5. Turn the latchbolt over and reinstall into the lock.
6. Depress the latchbolt until it re-engages the tail socket.
7. Remove the red headed screw from the stopworks
and place it in the stopworks on the opposite side
of the case.
8. Loosen the front screw to change the bevel. Tighten
the front screws.
9. Reinstall the lock and armored front into the door.
10. If changing bevel only, i.e. RH to RHR. Omit step 7.
Reversing Hand:
Depress Latchbolt
Front
Screw
Depress the Catch Plate Red-Headed Screw
Front
Screw
27
AM/BM Series Mortise Locks – AM Series Knob Designs
Premier Product
HTHB
Knob: HT
Rose: HB
Heavy Wrought Brass,
Bronze or Stainless Steel
HBHA
Knob: HB
Rose: HA
Heavy Wrought Brass,
Bronze or Stainless Steel
Also Available with HB Rose
HBHD
Knob: HB
Rose: HD
Heavy Wrought Brass,
Bronze or Stainless Steel
HTHA
Knob: HT
Rose: HA
Heavy Wrought Brass or Bronze
HBG
Knob: HB
Rose: G
Wrought Brass, Bronze or Stainless Steel
HTG
Knob: HT
Escutcheon: G
Wrought Escutcheon
Brass, Bronze or Stainless Steel
HBH
Knob: HB
Escutcheon: H
Heavy Wrought Knob
Wrought Escutcheon
Brass, Bronze or Stainless Steel
HTH
Knob: HT
Escutcheon: H
Heavy Wrought Knob
Wrought Escutcheon
Brass, Bronze or Stainless Steel
29⁄16"
65.08 mm
31⁄8"
79.37 mm
21⁄4"
57.15 mm
HTHD
Knob: HT
Rose: HD
Heavy Wrought Brass,
Bronze or Stainless Steel
29⁄16"
65.08 mm
29⁄16"
65.08 mm
21⁄4"
57.15 mm
21⁄4"
57.15 mm
71⁄2"
190.5 mm
21⁄4"
57.15 mm
25⁄8"
66.67 mm
21⁄4"
57.15 mm
21⁄4"
57.15 mm
21⁄4"
57.15 mm
8"
203.2 mm
3"
76.2 mm
21⁄4"
57.15 mm
29⁄16"
65.08 mm
3"
76.2 mm
21⁄4"
57.15 mm
29⁄16"
65.08 mm
21⁄4"
57.15 mm
21⁄4"
57.15 mm
8"
203.2 mm
27⁄8"
73.02 mm
21⁄4"
57.15 mm
71⁄2"
190.5 mm
21⁄4"
57.15 mm
27⁄8"
53.15 mm
3"
76.2 mm
31⁄4"
82.55 mm
21⁄4"
57.15 mm
28
AM/BM Series Mortise Locks – AM Series Knob Designs
Premier Product
TH
Knob: T
Escutcheon: H
Wrought Brass or Bronze
TG
Knob: T
Escutcheon: G
Wrought Brass or Bronze
BD
Knob: B
Rose: D
Wrought Brass or Bronze
Also Available with ARose
BG
Knob: B
Escutcheon: G
Wrought Brass or Bronze
BH
Knob: B
Escutcheon: H
Wrought Brass or Bronze
31⁄8"
79.37 mm
29⁄16"
65.08 mm
21⁄8"
53.97 mm
21⁄4"
57.15 mm
21⁄8"
53.97 mm
25⁄8"
66.67 mm
71⁄2"
190.5 mm
21⁄4"
57.15 mm
21⁄8"
53.97 mm
23⁄8"
60.32 mm
8"
203.2 mm
21⁄4"
57.15 mm
21⁄8"
53.97 mm
213⁄32"
61.11 mm
8"
203.2 mm
21⁄4"
57.15 mm
21⁄8"
53.97 mm
213⁄32"
61.11 mm
71⁄2"
190.5 mm
TA
Knob: T
Rose: A
Wrought Brass or Bronze
Also Available with DRose
27⁄16"
61.91 mm
21⁄8"
53.97 mm
29⁄16"
65.08 mm
29
AM/BM Series Mortise Locks – BM Series Lever Designs
Premier Product
Hastings:
Javelin:
HSL
Lever: HS - Cast
Rose: L - Brass, Bronze
or Stainless Steel
BRL
Lever: BR - Cast
Rose: L - Wrought Brass, Bronze
or Stainless Steel
JL
Lever: J - Forged Brass or Cast Bronze
Rose: L - Wrought Brass or Bronze
BRG
Lever: BR - Brass or Bronze
Escutcheon: G - Brass or Bronze
or Stainless Steel
HSG
Lever: HS - Cast
Escutcheon: G - Wrought Brass, Bronze
or Stainless Steel
HSH
Lever: HS - Cast
Escutcheon: H - Wrought Brass,
Bronze or Stainless Steel
Broadway:
21⁄4"
57.15 mm
215⁄16"
74.61 mm
43⁄4"
120.65 mm
21⁄4"
57.15 mm
25⁄8"
66.67 mm
43⁄4"
120.65 mm
71⁄2"
190.5 mm
BRH
Lever: BR - Cast
Escutcheon: H - Wrought Brass,
Bronze or Stainless Steel
21⁄4"
57.15 mm
25⁄8"
66.67 mm
43⁄4"
120.65 mm
8"
203.2 mm
21⁄4"
57.15 mm
215⁄16"
74.61 mm
43⁄4"
120.65 mm
21⁄4"
57.15 mm
71⁄2"
190.5 mm
25⁄8"
66.67 mm
43⁄4"
120.65 mm
21⁄4"
57.15 mm
8"
203.2 mm
25⁄8"
66.67 mm
43⁄4"
120.65 mm
21⁄4"
57.15 mm
21⁄4"
57.15 mm
4"
101.60 mm
JG
Lever: J - Forged Brass
or Cast Bronze
Escutcheon: G - Wrought Brass, Bronze or
Stainless Steel
21⁄4"
57.15 mm
71⁄2"
190.5 mm
21⁄4"
57.15 mm
4"
101.60 mm
JH
Lever: J - Forged Brass
or Cast Bronze
Escutcheon: H - Wrought Brass,
Bronze or Stainless Steel
21⁄4"
57.15 mm
8"
203.2 mm
21⁄4"
57.15 mm
43⁄4"
120.65 mm
uuu
uuu
uuu
30
AM/BM Series Mortise Locks – BM Series Lever Designs
Premier Product
NG
Lever: N - Brass, Bronze
or Stainless Steel
Escutcheon: G - Brass, Bronze
or Stainless Steel
WG
Lever: W - Brass, Bronze
or Stainless Steel
Escutcheon: G - Brass, Bronze
or Stainless Steel
NH
Lever: N - Brass, Bronze
or Stainless Steel
Escutcheon: H - Brass,
Bronze or Stainless Steel
NL
Lever: N - Brass, Bronze or
Stainless Steel
Rose: L - Brass, Bronze or
Stainless Steel
VL
Lever: V - Forged Brass,
Cast Bronze or Stainless Steel
Rose: L - Wrought Brass,
Bronze or Stainless Steel
WL
Lever: W - Brass, Bronze or
Stainless Steel
Rose: L - Brass, Bronze or
Stainless Steel
Neo:
Ventura:
Wave:
21⁄4"
57.15 mm
25⁄8"
66.67 mm
4"
101.60 mm
21⁄4"
57.15 mm
71⁄2"
190.5 mm
25⁄8"
66.67 mm
4"
101.60 mm
21⁄4"
57.15 mm
8"
203.2 mm
25⁄8"
66.67 mm
4"
101.6 mm
VG
Lever: V - Forged Brass,
Cast Bronze or Stainless Steel
Escutcheon: G - Wrought Brass,
Bronze or Stainless Steel
VH
Lever: V - Forged Brass,
Cast Bronze or Stainless Steel
Escutcheon: H - Wrought Brass,
Bronze or Stainless Steel
21⁄4"
57.15 mm
71⁄2"
190.5 mm
25⁄8"
66.67 mm
43⁄4"
120.65 mm
21⁄4"
57.15 mm
25⁄8"
66.67 mm
43⁄4"
120.65 mm
21⁄4"
57.15 mm
8"
203.2 mm
25⁄8"
66.67 mm
43⁄4"
120.65 mm
WH
Lever: W - Brass, Bronze
or Stainless Steel
Escutcheon: H - Brass, Bronze
or Stainless Steel
21⁄4"
57.15 mm
215⁄16"
74.6 mm
41⁄2"
114.3 mm
21⁄4"
57.15 mm
71⁄2"
190.5 mm
215⁄16"
74.6 mm
41⁄2"
114.3 mm
21⁄4"
57.15 mm
8"
203.2 mm
215⁄16"
74.6 mm
41⁄2"
114.3 mm
uuu
uuu
uuu
31
AM/BM Series Mortise Locks – BM Series Lever Designs
Premier Product
ANSI Straight Lip (standard)
• Brass or bronze
• Non-handed
• 4-7/8" (124mm) x 1-1/4" (32mm) x 1-1/8" (29mm)
lip to center
• Optional lip lengths: 7/8" (22mm), 1-1/4" (32mm),
1-3/8" (35mm), 1-1/2" (38mm), 1-3/4" (44mm),
2" (51mm), 2-1/4" (57mm), 2-1/2" (64mm), 2-3/4" (70mm),
3" (76mm)
ANSI Curved Lip
• Brass or bronze
• Handed
• 4-7/8" (124mm) x 1-1/4" (32mm) x 1-1/4" (32mm)
lip to center
• Optional lip lengths: 1-3/8" (35mm), 1-1/2" (38mm)
1-3/4" (44mm), 2" (51mm), 2-1/4" (57mm),
2-1/2" (64mm), 2-3/4" (70mm), 3" (76mm)
Strikes:
Latchbolt x Deadbolt 460 Straight Lip
Functions: 468 Curved Lip for RH
02,11,13,15,16, 466 Curved Lip for LH
19,20,21,31,34,38
Latchbolt Only 463 Straight Lip
Functions: 464 Curved Lip for RH
01,07,12,17,22,23, 462 Curved Lip for LH
24,26,27,32,33,37
Deadbolt Only 456 Straight Lip
Functions:
40,41,42,44
Note: Straight lip strikes are standard.
Specify if curved lip strike is required.
PART NO. DESCRIPTION
XG
Lever: X - Forged Brass,
Cast Bronze or Stainless Steel
Escutcheon: G - Wrought Brass,
Bronze or Stainless Steel
XH
Lever: X - Forged Brass, Cast
Bronze or Stainless Steel
Escutcheon: H - Wrought Brass,
Bronze or Stainless Steel
XL
Lever: X - Forged Brass,
Cast Bronze or Stainless Steel
Escutcheon: L - Wrought Brass,
Bronze or Stainless Steel
Xavier:
21⁄4"
57.15 mm
21⁄2"
63.5 mm
43⁄4"
120.65 mm
21⁄4"
57.15 mm
71⁄2"
190.5 mm
25⁄8"
66.67 mm
43⁄4"
120.65 mm
21⁄4"
57.15 mm
8"
203.2 mm
21⁄2"
66.67 mm
43⁄4"
120.65 mm
uuu
32
AM/BM Series Mortise Locks
Premier Product
Cylinder
• MC61 - 1-1/8" for 1-3/4" door. Collar-16-113A
• Hotel Cylinder
For function 15 and 16.
MCH61 - 1-18" for 1-3/4" door. Collar-16-113A
• Finishes - 3, 4, 10, 10B, 26, 26D.
Cylinder for Interchangeable Core
• 16CR-16 - 6pin-1-1/8"
• 16CR-27 - 6 or 7 pin 1-1/4"
• 16CRH-26 - 6 pin, hotel
• Collar - 16 -113A
• Finishes - 3, 4, 10, 10B, 26, 26D
Cylinder:
Thumb Turn 16-17A: Cams:
• Furnished with rose trim. For escutcheon
trim, thumb turn is mounted on escutcheon.
• Finishes - 3, 4, 10, 10B, 26, 26D.
001 AM2
Used with functions
12, 17, 22, 23, 24, 27,
32 (I/S), 33, 37.
Used with deadbolt functions
11, 13, 15, 16, 19, 20, 21, 31, 32
(O/S), 34, 38, 40, 41, 42, 44 .
16CR-123-1
1/8" Thick
16CR-123-3
(Standard for 16RCH-26)
3/8" Thick
16CR-123-2
1/4" Thick
Cylinder Collars:
I.C. Mortise Cylinder Collar 16-113A
(Standard for 16CR-14, 16CR-26, 16CRH-26)
I.C. Rim Cylinder Collar
16RC-113
(Standard for
16RCR-16, 16RCR-27)
Spacer Rings:
33
AM/BM Series Mortise Locks
Premier Product
Face Plates (Scalps):
Spindles:
Knob Spindle
AM 385A–For trim with “H” escutcheon
AM 386A–For trim with “G” escutcheon and all rose trim
NOTE: AM 385A–Inside half-P/N-16-385
Outside half-P/N-BM-383
AM 386A–Inside half-P/N-16-385
Outside half-P/N-BM-383-2
Lever Spindle
BM 385A–For trim with “H” escutcheon and rose trim
BM 386A–For trim with “G” escutcheon
NOTE: BM 385A–Inside half (assembly with screw) 17S-384A
Outside half-BM-383
BM 386A–Inside half (assembly with screw) 17S-385A
Outside half-BM-383-2
Part No.
AM-15-305
Part No.
AM11-305
Part No.
AM12-305
Part No.
AM02-305
Function
15, 16, 38
Function
11,21,34
Function
07, 12, 17
27, 32, 33, 37
Function
02, 13, 19, 31
Part No.
AM22-305
Part No.
AM23-305
Part No.
AM41-305
Part No.
AM01-305
Function
22
Function
23
Function
40, 41, 42, 44
Function
01, 24, 26
Part No.
AM20-305
Function
20
34
AM/BM Series Mortise Locks
Premier Product
Order Example:
Example: To order a AM Series Apartment function Mortise lock with HTHA design, satin chrome finish, with a straight lip strike, right
handed, keyed different.
Specify:
Standard: AM 11 HTHA 26D 460 RH KD XXX
Series
Function
Design
Finish
Strike
Handing Keying Options
(if required)
All locksets shall be Mortise Locksets as supplied by
Arrow Lock company.
Locks shall have all functions available in one size case,
manufactured from heavy gauge steel, minimum thickness
3/32", chrome plated for corrosion resistance and lubricity
of parts. The handing of all locks shall be reversible
without the disassembly of the lockcase. Cases are to
be closed on all sides to protect internal parts. Locks are
to have adjustable, beveled and armored fronts, standard
2-3/4" backset, a full 3/4" throw two-piece mechanical
anti-friction latchbolt, and a one-piece stainless steel
1" throw deadbolt, and shall be available for a minimum
door thickness of 1-3/8". Internal parts shall be heavy
gauge steel, zinc dichromate plated for corrosion
resistance.
All locksets with latchbolts, regardless of trim, shall be
listed by Underwriters Laboratories for A label and
lesser class doors, 4' x 10' single or 8' x 10' pair.
Cylinder options shall include interchangeable core.
Lock trim (knob, lever, sectional or escutcheon) shall
be throughbolted through the lockcase to assure correct
alignment and proper operation.
Certification:
UBC-7(1997) and UL10C-Positive Pressure
Federal Specification FF0H-106G
ANSI A156.13 Series 1000, Operational Grade 1
ANSI A117.1, Accessibility Code, 1989 (Formerly Tile 19,
California State Fire Marshal Standard) (lever handle trim).
All locks, trim, and cylinders shall be from one manufacturer.
All locksets shall carry a five-year limited warranty.
Suggested Specification AM/BM:

Navigation menu