Artaflex AWP24U USB Dongle User Manual

Artaflex, Inc. USB Dongle

User Manual

AWP24U User Manual DSAWP24U -DSSS USB Radio Dongle UMAWP24U Rev 2v0 Revised Sep 6, 2007
User Manual 2.4GHz DSSS USB Radio Dongle AWP24U Artaflex Inc. UMAWP24U Rev 2v1 215 Konrad Crescent Revised October 4, 2007 Markham, Ontario, Canada L3R8T9 Page 2 of 4 http://www.artaflexmodules.com 905-479-0148 Wireless USB Radio Dongle Installation 1. Plug in the Artaflex USB dongle to any USB port, you will see the following message . 2. Once asked for the drivers please select “Install from a specific location” then Browse and select the USB driver. 3. When asked for device selection please select “Artaflex USB to RF dongle” from the list
User Manual 2.4GHz DSSS USB Radio Dongle AWP24U Artaflex Inc. UMAWP24U Rev 2v1 215 Konrad Crescent Revised October 4, 2007 Markham, Ontario, Canada L3R8T9 Page 3 of 4 http://www.artaflexmodules.com 905-479-0148 4. Once it is successfully installed, you will find the following message. FCC Statement One of the bottlenecks that many product developers encounter in incorporating any radio communication device is facing the legal aspect of qualifying the products and going to market without encountering legal problems. The Telecommunication Certification Body (TCB) authorization process in the United States offers manufacturers more than one approval body. The TCB authorization process certifies devices in accordance with FCC rules and policies. The performance of the Artaflex AWP24U radio is measured according to the requirements of FCC rules. The major applicable FCC regulations are described in Section 15.247 (a) to (d).
User Manual 2.4GHz DSSS USB Radio Dongle AWP24U Artaflex Inc. UMAWP24U Rev 2v1 215 Konrad Crescent Revised October 4, 2007 Markham, Ontario, Canada L3R8T9 Page 4 of 4 http://www.artaflexmodules.com 905-479-0148 This equipment has been tested and found to comply with the limits for a Class B digital device, Pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: •Reorient or relocate the receiving antenna. •Increase the separation between the equipment and receiver. •Consult the dealer or an experienced radio/TV technician for help Any changes or modification not expressly approved by the party responsible for compliance could void the user's authority to operate the device. Where shielded interface cables have been provided with the product or specified additional components or accessories elsewhere defined to be used with the installation of the product, they must be used in order to ensure compliance with FCC regulations. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Navigation menu