AsiaRF AWM003 WiFi AP Router Module User Manual

AsiaRF Co., Ltd. WiFi AP Router Module

User manual

www.asiarf.com TEL: +886-2-29213598 FAX: +886-2-29214445 1F, No.2, Lane 45, Shuiyuan Street, Yonghe City New Taipei County 234 Taiwan, R.O.C. page: 1 AWM003 WiFi AP Router Module FCC ID:TKZAWM003 RT5350 8MB Flash (Max is 16MB), 64MB SDRAM Professional IP Camera version Pins Compatible with AWM002 V1 DESCRIPTION AWM003 is a small-size 3.8 x 4.7 cm, 802.11n AP board that achieves a data rate up to 150Mbps. Memory size is 8MB Flash, 64MB SDRAM. It is 3 times faster than the legacy 11g model but is priced less, making it more cost-effective. The temperature is less than 60 Celsius degree with full speed running. This product supports AP/Client modes. It is ideal for multi-purpose installation to share wireless connection. By supporting 64/128-bits WEP, TKIP,WPA, WPA2,AES and WPS, helps to protect your data and privacy during transmission. This module could be mounted on system board like IPTV, STB, Media Player, Femto, XDSL, Cable Modem, Industrial PC, Ethernet Switch, Printer Server, Connected TV, Also WiFi IP camera, WiFi storage function embedded. FEATURES Ralink RT5350 chipset with Interface USB, GPIO, UART and GPIOs. Support boot from Flash Data Rate up to 150Mbps Security: 64/128-bits WEP, TKIP,WPA, WPA2,AES,WPS Multi-modes: AP/Client
1F, No.2, Lane 45, Shuiyuan Street, Yonghe City New Taipei County 234 Taiwan, R.O.C. page: 2 www.asiarf.com TEL: +886-2-29213598 FAX: +886-2-29214445 SPECIFICATION Hardware Features: Standard IEEE 802.11 b/g/n standards compliant Wireless LAN 1T1R Mode Antenna IPEX Connector *1 30-pin Interface USB*1 ( Host ) UART*1 GPIOs VCC/GND I2S I2C PCM Frequency Range 2.400 ~ 2.4835GHz ( subject to local regulations) Number of Selectable Channels 802.11n 20MHz/40MHz ; 802.11b/g USA, Canada (FCC):11 channels (2.412GHz~2.462GHz) Europe (CE): 13 channels (2.412GHz~2.472GHz) Japan (TELEC): 14 channels (2.412GHz~2.4835GHz) Data Rate 802.11n: up to 150Mbps 802.11b: 1, 2, 5,5, 11Mbps 802.11g: 6, 9, 12, 18, 24, 36, 48, 54Mbps Coverage Area Up to 6 times faster then existing 802.11 b/g products Dimension 38x47 mm Certifications FCC/CE by request
1F, No.2, Lane 45, Shuiyuan Street, Yonghe City New Taipei County 234 Taiwan, R.O.C. page: 3 www.asiarf.com TEL: +886-2-29213598 FAX: +886-2-29214445 SOFTWARE FEATURE ➢ Network Features:  Video, Storage  DHCP Client/Relay/Server  Dynamic DNS  NTP Client  DNS Cache/Proxy  Firewall 1. MAC/IP/Port Filter 2. Virtual Server 3. DMZ 4. Content Filter ➢ WiFi:  One Transmit and One Receive paths(1T1R)  20MHZ/40MHZ bandwidth.  Support Multiple SSID  Clock rate up to 400MHzLegacy and High Throughput Modes.  Support WPS  High security with build-in: WEP 64/128, TKIP, WPA, WPA2 mixed,802.1xand 802.11i  802.1X Authentication with RADIUS Client  QoS-WMM.WMM-PS
1F, No.2, Lane 45, Shuiyuan Street, Yonghe City New Taipei County 234 Taiwan, R.O.C. page: 4 www.asiarf.com TEL: +886-2-29213598 FAX: +886-2-29214445 PIN DEFINITION I II Description Pin Pin Description I2SCLK 2 1 PCMFS I2SWS 4 3 PCMCLK I2SSDO 6 5 PCMDRX I2SSDI 8 7 PCMDTX I2C_SCLK 10 9 I2C_SD RX1+ 12 11 TX1+ RX1- 14 13 TX1- GND 16 15 GND Size: 1. Size: 38*47 mm Double row 1.27mm pitch on the 35mm side 2. Reserved: Available for use 3. Reserved is ACTIVE LOW 4. LEDs and WPS/Reset to Default are active LOW Reset /Reset to default function is share AP/Client selection pin Description Pin Pin Description +3.3V 2 1 +3.3V UART_Rx 4 3 GND UART_Tx 6 5 Reserved GND 8 7 WPS/Reset to Default # LED_WLAN# 10 9 GND LED_WPS# 12 11 USB_D+ AP/Client selection 14 13 USB_D- 1.2V 16 15 1.2V GPIO #19 18 17 TX0+ GPIO #18 20 19 TX0- GPIO #17 22 21 RX0+ LINK0_LED 24 23 RX0-
1F, No.2, Lane 45, Shuiyuan Street, Yonghe City New Taipei County 234 Taiwan, R.O.C. page: 5 www.asiarf.com TEL: +886-2-29213598 FAX: +886-2-29214445 Evaluated Board:
1F, No.2, Lane 45, Shuiyuan Street, Yonghe City New Taipei County 234 Taiwan, R.O.C. page: 6 www.asiarf.com TEL: +886-2-29213598 FAX: +886-2-29214445 Pin Sharing Table: PIN1 3.3V 1 2 3.3V UART_RX GPIO #16 RX 3 4 GND UART_TX GPIO #15 TX 5 6 LINK1_LED LINK1_LED GND 7 8 #0 RST_PBC WLAN_LED 9 10 GND WPS_LED GPIO #21 JTAG_TRST_N 11 12 USB D+ AP/Client GPIO #20 JTAG_TCLK 13 14 USB D- 1.2V 15 16 1.2V GPIO #19 GPIO #19 JTAG_TMS 17 18 TX0+ GPIO #18 GPIO #18 JTAG_TDI 19 20 TX0- GPIO #17 GPIO #17 JTAG_TDO 21 22 RX0+ LINK0_LED 23 24 RX0- PIN2 RTS I2S_CLK GPIO #7 1 2 GPIO #11 PCM_FS DTR TXD I2S_WS GPIO #8 3 4 GPIO #12 PCM_CLK DCD CTS I2S_SDO GPIO #9 5 6 GPIO #13 PCM_DRX DSR RXD I2S_SDI GPIO #10 7 8 GPIO #14 PCM_DTX RI I2C_CLK GPIO #2 9 10 GPIO #1 I2C_SD RX1+ 11 12 TX1+ RX1- 13 14 TX1- GND 15 16 GND Each column is one function, the same color is the same setting.
1F, No.2, Lane 45, Shuiyuan Street, Yonghe City New Taipei County 234 Taiwan, R.O.C. page: 7 www.asiarf.com TEL: +886-2-29213598 FAX: +886-2-29214445 FCC Statement: FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/ TV technician for help. CAUTION: Any changes or modifications not expressly approved by the grantee of this device could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
1F, No.2, Lane 45, Shuiyuan Street, Yonghe City New Taipei County 234 Taiwan, R.O.C. page: 8 www.asiarf.com TEL: +886-2-29213598 FAX: +886-2-29214445 RF exposure warning This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provide with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. End Product Labeling : This transmitter module is authorized only for use in device where the antenna may be installed such that 20cm may be maintained between the antenna and users. The final end product must be labeled in a visible area with the following: "Contains FCC ID: TKZAWM003 ”. Information for the OEMs and Integrators The following statement must be included with all versions of this document supplied to an OEM or integrator, but should not be distributed to the end user. 1) This device is intended for OEM integrators only. 2) Please see the full Grant of Equipment document for other restrictions. Because this module doesn’t have a shield case so belong a limit module approval (LMA) which specific host listed as below : Model Model Description WCB001 WIFI CONTROL BOX * Antenna Gain = 1.8dBi ( type : Dipole / Reverse SMA )

Navigation menu