Asiatelco Technologies LM61 LTE Cat1 module User Manual LM61 20160513

Asiatelco Technologies Co. LTE Cat1 module LM61 20160513

User manual

LM61 User Manual 1 LM61UserManual
LM61 User Manual 2 Index1.AboutthisManual............................................................................32.ProductOverview............................................................................33.Configuringthemodel....................................................................33.1Login ............................................................................................................... 33.2 Dashboard ...................................................................................................... 33.3 4G .................................................................................................................. 53.3.1Setting...............................................................................................................53.3.2APNSettings.....................................................................................................53.3.3PINManagement..............................................................................................53.3.4LANSettings......................................................................................................63.4 Status ............................................................................................................. 73.4.1WANStatus.......................................................................................................83.4.2LANStatus.........................................................................................................83.4.34GStatus...........................................................................................................83.4.4SoftwareStatus................................................................................................93.5 System ........................................................................................................... 93.5.1Password.........................................................................................................103.5.2Backup&Restore...........................................................................................10
LM61 User Manual 3 1. AboutthisManualThe content of this User Manual has been made as accurate as possible.However, due to continual product improvements, specifications and otherinformationaresubjecttochangewithoutnotice.2. ProductOverviewLM61 supports LTE Band 4/13 (Subject to the configuration of LTE module)anditsupportspopularoperatingsystemslikeWindows,LinuxandMac. 3. ConfiguringthemodelThe basic settings in WebGUI consist of four main parts namedDashboard,4G,Status and System. You can login to WebGUI as follows, andconfigurethesettingsaccordingtoyourrequirements.Connect the PC to LM61 with DB100, waiting for about one minuteuntilthedevicefinishedinitializing.PleaseensurethatUSIM cardhas beeninsertedintoUSIMslot.3.1Login OpenyourWebbrowserandenter10.0.0.1intheaddressbar;Loginwindowwillpopup;When prompted for User name and password, enter the following usernameandpassword.Username/Password:admin/admin3.2 Dashboard Aftersuccessfullogin,thefollowingscreenwillappearandyou will see sixmenusonthetopbaroftheWebGUI. 
LM61 User Manual 4 The bars in the middle indicate the received signal level, data connectionstatus,USIMstatusshownasbelowpicture:LTEsignallevelDataconnectionIcon,whenmodelconnecttonetwork,theiconison,otherwise,itisgreyUSIMcardstatus. IfmodelworkwithoutUSIMcard.TheUSIMcardiconchangetoRebootkey.Itisusedtorebootthedevice Logoutkey.ItisusedtologoutWebpageFigure 3-2-1 Icon Fromdashboardpage,youcanalsoknow4Gstatus,status,WANInfo,LANInfo,uplink/downlink and Device Info. You can see the dashboard pageasfigure3‐2‐2. Figure 3-2-2 Dashboard Page
LM61 User Manual 5 3.3 4G 3.3.1 Setting Connection Mode: bridge and router, default mode is bridge Connection Type: Auto and manual, default type is auto Figure 3-3-1-1 Setting 3.3.2 APN Settings Figure 3-3-2-1 APN Settings ThedefaultAPNtypeisIPV4andAPNisNULL,ifyouwanttoconfiguretheLTEAPN,youshouldchoosethemanualmode,andthenyoucanconfigurethe APNsettings 3.3.3 PIN Management Fromthispage,youcanseetheUSIMcardstatusandPINstatus. 
LM61 User Manual 6 Figure 3-3-3-1 PIN Management ThedefaultPINstatusisdisabled;youcaninputthecorrectPINtoenablethePINfunction.ThemaximumPINattemptsare3;otherwiseyoumustenterPUKtoresetthePINcode.TheUSIMwillbeinvalidaftertheunsuccessfulattemptsfor10times. PINManagement:Enter the correct PIN to enable or disable the PINfunction,PINcodeshouldbe4to8digits;3.3.4 LAN Settings Fromthispage,youcansetallsettingsfortheinternalLAN. Figure 3-3-4-1 LAN Settings
LM61 User Manual 7  IPAddressEntertheIPaddressofyourrouter(factorydefault:192.168.0.1).  SubnetMask‐Anaddresscodethatdeterminesthesizeofthenetwork.Normallyuse255.255.255.0asthesubnetmask. DHCP‐EnableorDisabletheDHCPserver.IfyoudisabletheServer,ClientcannotgetvalidIPaddressfrommodelautomatically.ButyoucanconfiguretheaddressofyourPCmanuallytoconnectmodel StartIPAddress‐SpecifyanIPaddressfortheDHCPservertostartwithwhenassigningIPaddress.Thedefaultstartaddressis10.0.0.10. EndIPAddress‐SpecifyanIPaddressfortheDHCPServertoendwithwhenassigningIPaddress.Thedefaultendaddressis10.0.0.10.  LeaseTime‐TheLeaseTimeistheamountoftimeanetworkuserwillbeallowedconnectiontotherouterwiththeircurrentdynamicIPaddress.Entertheamountoftimeinminutesandtheuserwillbe"leased"thisdynamicIPaddress.Afterthetimeisup,theuserwillbeassignedanewdynamicIPaddressautomatically. StaticIP‐IP/MACbindingfunction,thesystemwillassignafixedIPaddresstotheMACaccordingtotherules. Note:1. IfyouchangetheIPAddressofLAN,youmustusethenewIPaddresstologintotheMODELrouter. 2. IfthenewLANIPaddressyousetisnotinthesamesubnet,theIPaddresspooloftheDHCPserverwillchangeatthesametime,whiletheVirtualServerandDMZHostwillnottakeeffectuntiltheyarere‐configured.3.4 Status Onthispage,youcanseeWANStatus,LANStatus,4GStatusandSoftwareStatus.
LM61 User Manual 8 Figure 3-4-1 Status 3.4.1 WAN Status FromtheWANStatus,WANIPAddress,WANPrimaryDNSandWANSecondaryDNSinformationcanbedisplayed Figure 3-4-1-1 WAN Status 3.4.2 LAN Status Fromthispage,youcanseetheLANStatussuchasIP,localnetmask,DHCPserverandMACaddress. Figure 3-4-2-1 WiFi LAN Status 3.4.3 4G Status Clickingonthe“4GStatus”,youcanseetheLTEinformationsuchasConnectionStatus,USIMStatus,IMEI,IMSI,RSSI,andSINR.
LM61 User Manual 9 Figure 3-4-3-1 LTE Status 3.4.4 Software Status  SoftwareversionandtheDTBversioncanbedisplayed. Figure 3-4-4-1 Software 3.5 System On this page you can set System Menu: Password and backup & restore.
LM61 User Manual 10 Figure 3-5-1 System 3.5.1 Password Thedefaultpasswordisadmin,youcanenter1~32charactersfor2timesasyournewpassword.Thenyouwouldlogoutautomaticallyandyoushouldlogintothesystembythenewpassword. Figure 3-5-1-1 Password 3.5.2 Backup & Restore Clickingthe“Export”button,thecurrentsettingswillbesavedasadatafiletothelocalPC.Youcanimportthedeviceconfigurationfromthefilesthatyousaved.Youcanrestoreandrebootthedevice.
LM61 User Manual 11 Figure 3-5-2-1 Backup & Restore Federal Communications Commission (FCC) Statement 15.21 You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment. 15.105(b) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference and 2) this device must accept any interference received, including interference that may cause undesired operation of the device.
LM61 User Manual 12 FCC RF Radiation Exposure Statement: To comply with the FCC RF exposure compliance requirements, this device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. End Product Labeling: This module is designed to comply with the FCC statement, FCC ID :XYOLM61 The host system using this module, should have label in a visible area indicated the following texts: "Contains FCC ID : XYOLM61 ". Manual Information to the End User The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the user’s manual of the end product which integrates this module. The end user manual shall include all required regulatory information/warning as shown in this manual. Antenna Restriction For mobile and fixed operating configurations the antenna gain, including cable loss, the device, module LM61 must not exceed the following gain values per bands for B4 1710-1755 MHz, 1.34 dBi gain for B13 777-787 MHz , 20.75 dBi gain

Navigation menu