Asiatelco Technologies T-N100 LTE WiFi Router User Manual Quick Start Guide U380EV 1 1

Download:
Mirror Download [FCC.gov]
Document ID	2711265
Application ID	gthJ5BFwBbAFZBrwr0T8cg==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	25.14kB (314194 bits)
Date Submitted	2015-08-11 00:00:00
Date Available	2015-08-12 00:00:00
Creation Date	2015-07-28 08:41:49
Producing Software	Acrobat Distiller 9.0.0 (Windows)
Document Lastmod	2015-08-06 15:37:03
Document Title	Microsoft Word - Quick Start Guide_U380EV_1.1
Document Creator	PScript5.dll Version 5.2.2
Document Author:	Administrator

Quick Start Guide
Dear Customer
Thank you for Purchasing the LTE WiFi Router. Have a wonderful experience with lightning speed
downloads.
For information LTE stands for “Long Term Evolution” and CPE stands for “Customer Premises
Equipment”.
Before you Begin
Check the following items in this package:
Accessories:
Item
Antenna
POWER SUPPLY
Battery
Quantity
Getting to know the CPE
Note:
The figures below are provided only for reference purposes. See the actual product for more details.
1. WPS
Press WPS button for 5 seconds to open the PBC function
2. (RST) RESET
One can restore the default settings of the CPE by holding down this button for more than 10
seconds. Restoring the default settings of the CPE will override all the previous settings.
3. Phone Port
This Port is used for connecting Phone using a Phone cable
4. LAN1‐LAN3 Indicators
This indicator is on when an Ethernet device has been connected to the relevant port.
5. ON/OFF switch
This Port is used for controlling the device to power on or power off.
6. Power Supply
This Port is used for connecting Power Supply.
Others
When you open the back cover, you can insert the SIM card and install the battery.
Placing the CPE

Keep the CPE away from household electrical appliances that produce strong electric or
magnetic fields such microwave ovens, refrigerators or dish satellite antennas.
Connecting the CPE
Install the USIM card
This CPE is specially designed for the 4G LTE network. Please check that you have a valid USIM card
from the service provider.
 Open the bottom cover on the CPE
 Insert a valid USIM card into the USIM card slot.
 Insert a Battery into the Battery slot ,put the Bottom cover back.
Remove the USIM card
Push to eject the USIM card from the slot.
Remove the Battery
Push to eject the Battery from the Battery slot
Connecting External Device(s) to the CPE
To use the Internet connection and configure the CPE settings, you must connect your CPE to a
computer.
1. Insert the Power supply cable into the Power port.
2. Insert an Ethernet cable to one of the Ethernet ports.
3. Insert a phone cable to the phone port.
4. Plug the power supply into a power outlet.
5. Connect LAN devices such as computer or switches to the LAN ports of the CPE by using
good quality Ethernet cables or use Wi‐Fi.
Accessing the Web based Utility
The web based utility of the CPE is a web browser based configuration interface that allows easy
device set up, configuration and management through internet browser. For example on a PC with
Windows XP or higher version:
1. Connect the hardware of the CPE correctly.
2. Set the IP address of the connected computer and ensure that the IP address of the computer is in
the same segment as that of CPE.
Note:
By default the IP address of the CPE is 192.168.0.1, the subnet mask is 255.255.255.0 and the user
log in password is admin and password is admin. It is recommended that the IP address and DNS
settings are obtained automatically.
3. Run internet explorer. Enter http://192.168.0.1. In the address bar and press enter.
4. Enter the correct user name and password in login window and login. After the password
verification, the web based utility functions can be performed.
5. The HOME screen of the CPE will be displayed
For more information
Refer to the user manual on home screen of the GUI of the CPE.
FAQ:
The power indicator is not ON.

Check if the Power Supply is plugged properly into AC socket.

Check if the LED on the POE power supply is Green indicating it is correctly plugged in AC.

Check if the power adapter meets the requirement and specification

Check if the Ethernet Cable used to carry power to CPE is a four pair cable.
Web Based Utility cannot be accessed

Ensure that the CPE is on.

Ensure that network cable between LAN port on POE power supply ( or wireless router) and
computer is properly connected

Ensure that IP address of the computer is correct
Device cannot access the network

Check if the SIM card is inserted properly

Check LTE network status from Web GUI and Minimum RSRP should be greater than ‐120
dBm for access to the network. Typically should be around ‐90 dBm.
Device cannot access the internet

Check that Operator has provided internet access services

Check that IP address is automatically taken

Check that firewall rules are not blocking your internet service.
Throughput performance is not OK

Ensure that there are not too many users under the same LTE Cell.

Ensure the wireless environment is good.

Check the value of SINR thru GUI. >10 dB is a good value for good throughput.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct theinterference by one or more of the following measures:
‐‐Reorient or relocate the receiving antenna.
‐‐Increase the separation between the equipment and receiver.
‐‐Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
‐‐Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) This device must accept any interference
received, including interference that may cause undesired operation.
Note: The manufacturer is not responsible for any radio or TV interference caused by
unauthorized modifications to this equipment. Such modifications could void the user’s
authority to operate this equipment.
Any Changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
The antenna(s) used for this device must be installed to provide a separation distance of at least
20 cm from all persons during normal operation.
Only approved antenna (provided by the manufacturer) could be used for this device to compliant
FCC relevant requirements.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Author                          : Administrator
Create Date                     : 2015:07:28 08:41:49+08:00
Modify Date                     : 2015:08:06 15:37:03-04:00
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Format                          : application/pdf
Title                           : Microsoft Word - Quick Start Guide_U380EV_1.1
Creator                         : Administrator
Creator Tool                    : PScript5.dll Version 5.2.2
Metadata Date                   : 2015:08:06 15:37:03-04:00
Producer                        : Acrobat Distiller 9.0.0 (Windows)
Document ID                     : uuid:db2a42b5-6f4b-4560-b4d0-deff5c6b2886
Instance ID                     : uuid:cf48d0c7-dffe-4a62-ae98-84f7d85235e3
Page Count                      : 6

EXIF Metadata provided by EXIF.tools