Askey Computer NDT7600ABP GPS User Manual U GPSNDT7600ABPD61 RoHS V01
Askey Computer Corp GPS U GPSNDT7600ABPD61 RoHS V01
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 821417 |
| Application ID | ej7YhPPcdz/XPJc62XCgXA== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 115.14kB (1439271 bits) |
| Date Submitted | 2007-07-26 00:00:00 |
| Date Available | 2007-07-26 00:00:00 |
| Creation Date | 2007-06-15 21:08:41 |
| Producing Software | Acrobat Distiller 7.0.5 (Windows) |
| Document Lastmod | 2007-07-09 11:47:11 |
| Document Title | U-GPSNDT7600ABPD61(RoHS)-V01 |
| Document Creator | Acrobat PDFMaker 7.0.7 for Word |
| Document Author: | George Hou |
NDT7600ABP-D61(SNAP-ROHS) Global Positioning System User’s Manual Version 0.1 June 15, 2007 Copyright Notice © 2007 All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose, without the express written permission of the seller. Disclaimer Information in this document is subject to change without notice. The statements, configurations, technical data, and recommendations in this document are believed to be accurate and reliable, but are presented without express or implied warranty. The seller therefore assumes no responsibility and shall have no liability of any kind arising from the supply or use of this document or the material contained herein. Statement of Conditions In the interest of improving internal design, operational function, and/or reliability, the seller reserves the right to make changes to the products described in this document without notice. The seller does not assume any liability that may occur due to the use or application of the product(s) or circuit layout(s) described herein. In addition, the program and information contained herein are licensed only pursuant to a license agreement that contains restrictions on use and disclosure (that may incorporate by reference certain limitations and notices imposed by third parties). Trademarks All other product or service names mentioned in this document may be trademarks of the companies with which they are associated. RoHS&WEEE Askey Computer Corp. recognizes the need to be a responsible corporate citizen. With respect to the current EU directives and the equivalent domestic legislation which implement the Restriction of Hazardous Substances (RoHS), Askey is committed to producing products supplied into the EU that are fully compliant to the directives on or before their respective effective dates. Safety and Precaution TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE Caution COVER (OR BACK). NO USE-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of un-insulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OF MOISTURE. POWER SUPPLY: Connect the supplied adapter to the side of the unit in the slot marked “DC 5V IN”. Plug the two-prong end of the power cord to an AC100-240V outlet. If you have difficulty inserting the plug, turn it over and reinsert it. If the unit will not be used for a long time, disconnect the plug from the outlet. Before plugging the power cord into an AC outlet, make sure that all the Note connections have been made. These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock, do not perform any servicing Caution other than that contained in the operating instructions unless you are qualified to do so. Refer to service manual for servicing instructions. ii Before and when using the product, carefully read the following notes. For your safety, do not operate the product while driving. Use this product prudently. The product is intended to be used only as a navigation aid. It is not for precise measurement of direction, distance, location or topography. The calculated route is given for reference only. It is the your responsibility to follow the traffic signs and local regulations along the roads. When you get off the car, do not leave your device on the dashboard that is subject to direct sunlight. The overheating of the battery might cause malfunction and/or danger. GPS is operated by the United States government, which is solely responsible for the performance of GPS. Any change to the GPS system might affect the accuracy of all GPS equipment. GPS satellite signals cannot pass through solid materials except glass. When you are inside a tunnel or building, GPS positioning is not available. A minimum of 4 GPS satellite signals is needed to determine current GPS position. Signal reception might be affected in situations, such as bad weather or dense overhead obstacles (e.g. trees and tall buildings). Other wireless devices in the vehicle might interfere with the reception of satellite signals and cause the reception to be unstable. A car holder is needed when you use the device in a car. Be sure to place the device in an appropriate place so as not to obstruct the driver’s view, or deployment of airbags. iii iv Contents Contents Before You Use......................................................................................................................................... vii PACKING LIST .....................................................................................................................VII NAVIGATION FUNCTION .......................................................................................................VII Chapter 1 Getting Started ..................................................................................................................... 1 HARDWARE FEATURES ........................................................................................................ 1 Front View .............................................................................................................. 1 Back View ............................................................................................................... 1 Left And Right Side Views ..................................................................................... 2 Top And Bottom Views ........................................................................................... 3 INITIALLY SWITCHING ON THE GPS..................................................................................... 3 CONNECTING TO AC POWER AND CHARGING THE BATTERY ................................................ 4 USING YOUR DEVICE IN A CAR ............................................................................................ 5 Using the Car Holder ............................................................................................. 5 Connecting the Car Charger ................................................................................. 5 CONNECTING TO A PC ......................................................................................................... 6 Chapter 2 Basic Operation ................................................................................................................... 7 POWER ON AND OFF ......................................................................................................... 7 OPERATING THE DEVICE ...................................................................................................... 7 MAIN MENU ......................................................................................................................... 8 Setup Submenu ..................................................................................................... 8 INSERTING A MINISD CARD ................................................................................................. 9 CONNECTING AN EARPHONE ............................................................................................... 9 Chapter 3 Device Settings ...................................................................................................................11 CLOCK .............................................................................................................................. 11 Time Zone............................................................................................................. 12 Date....................................................................................................................... 12 Time ...................................................................................................................... 13 VOLUME ............................................................................................................................ 13 BATTERY ........................................................................................................................... 14 DISPLAY ............................................................................................................................ 15 BLUETOOTH ...................................................................................................................... 16 SYSTEM ............................................................................................................................ 17 Chapter 4 Main Menu ......................................................................................................................... 19 NAVIGATOR........................................................................................................................ 19 PHOTO .............................................................................................................................. 20 Viewing Photos .................................................................................................... 21 Using the slideshow ............................................................................................. 22 MP3 PLAYER..................................................................................................................... 22 Global Positioning System Operation on MP3 Player .................................................................................... 24 BT CARKIT ........................................................................................................................ 25 Contact Viewer ..................................................................................................... 26 Call History ........................................................................................................... 26 Phone Shell .......................................................................................................... 27 CALCULATOR ..................................................................................................................... 27 vi Before You Use Before You Use Before using the GPS, read the user manual attached in the package and check whether or not spare parts are attached. Feel free to contact your retailer if you do not well find the spare parts or have questions or problems at the time of operation. Packing list Before using the GPS, check all the following items are present and in good condition. If any of the items is damaged or missing, contact your retailer immediately. 9 GPS x 1 9 Car Adapter x 1 9 USB Cable x 1 9 Stylus x 1 9 Mount Bracket x 1 9 Mount Cradle x 1 9 User Manual x 1 9 Quick Start Guide x 1 Navigation Function The unit is designed to provide you with route suggestions. It supports voice navigation. Other Special Functions ¾ SD Card and USB Input The unit is designed with SD card and USB ports and can be connected to SD card or other USB device for file loading. ¾ 2 GB Flash Storage Built-in 2G Flash Storage can store map data. ¾ Power Adapter Switch Automatically adapts to voltage requirements in U.S and other countries. ¾ Supporting file formats MP3 and WMA Format files vii Global Positioning System Notes and Cautions Note and Caution in this manual are highlighted with graphics as below to indicate important information. Note Caution Contains information that corresponds to a specific topic. Represents essential steps, actions, or messages that should not be ignored. This User’s Manual contains information on how to install and configure your GPS device. From now on, we will guide you through the correct configuration steps to implement your device. viii Chapter 1: Getting Started Chapter 1 Getting Started Hardware Features Depending upon the specific model you purchased, the color of your Note device may not exactly match that of device shown in this manual. Front View Number Component Charge Indicator Description When LED is red, the battery is being charged; when LED is green, the battery is fully charged. Microphone 3.5” LCD Panel You can speak through the component in the hand-free profile mode. Displays the output of your device. Tap the screen with a fingertip to select a menu or read information. Back View Number Component Speaker Description Sends out music, sounds, and voice. Global Positioning System Left And Right Side Views Number Component Stylus Volume Up Key Description You can tap the screen with the stylus. You can tune up the volume of the headphone or speaker. Volume Down Key You can tune down the volume of the headphone or speaker. Used to connect a headphone for private listening. Headphone Jack When the headphone is connected to this jack, the speaker will be turned off automatically. Play / Pause Key You can use the key to play back or pause music. This connector (under rubber dust cover) allows use External GPS Antenna of an optional external antenna with magnetic Connector mount, which may be positioned on top of the car for better signal reception in areas with poor reception. Power Button Hold Key Turns on and off the device. Designed to prevent you from operation by mistake. Chapter 2: Basic Operation Top And Bottom Views Number Component MiniSD Card Slot Description Accepts a MiniSD card for accessing data, such as MP3 music and photos. MiniUSB Port Connects through an AC adapter or USB cable to a PC or a car charger socket. Reset Key Battery Switch Restarts your device (soft reset). The main power/battery cutoff switch. Initially Switching ON the GPS Use a stylus to slide the ON/OFF switch to the ON position. Then, your product will be turned ON in 15 seconds. Connect the AC adapter as described below. Bear in mind to fully charge the battery before using your product for the first time. Always keep the ON/OFF switch in the ON position for normal Caution operation. Global Positioning System Connecting to AC Power and Charging the Battery For the first time, you should charge it for at least 8 hours. Initially, connect the AC power adapter to the miniUSB port. Then, plug the AC adapter into a wall outlet. The charge indicator glows red when the battery is being charged. Do not disconnect your device from AC power until the battery is fully charged and the charge indicator turns green. This will take a couple of hours. 1. Do not immediately turn on your device after connecting the AC adapter to charge a power-consumed battery. If you need to turn ON the device again, wait at least one minute. 2. Note Depending on your region of purchase, the connector converter may not look exactly same as that in the picture shown above. 3. Your device can also be charged when it is connected to a desktop computer via a USB cable. For optimal performance of the lithium battery, bear in mind the following notes: 1. Do not charge the battery when the surrounding temperature is high (e.g. in direct sunlight). 2. Caution There is no need to fully discharge the battery before charging. You can charge the battery before it is discharged. 3. If you will not use the product for a long period of time, be sure to fully charge the battery at least once in two weeks. Over discharge of the battery can affect the charging performance. Chapter 2: Basic Operation Using Your Device in a Car A car holder and a car charger are supplied with your device. Using the Car Holder Select an appropriate location for the car holder. Never place the holder where the driver’s field of vision is blocked. If the car’s windshield is tinted with a reflective coating, an external antenna (optional) may be needed to Caution route to the top of the car through a window. When closing the car window, be careful not to pinch the antenna cable. (An adequate space may be left, as needed, for a car with an anti-jamming window design.) The car holder consists of a bracket and a stand. Use the car holder to fix your device in a vehicle. Make sure that the GPS antenna has a clear view of the space. For initial positioning, remain at the same spot with a clear view of the space. The GPS may take a few minutes to find its current location initially. Connecting the Car Charger The car charger supplies power to your device you are using in a car. To protect your device against sudden surges in current, connect the car Caution charger only after the car engine has been started. Follow the instructions below to connect the car charger to the car cigarette socket. 1. Connect one end of the car charger to the power connector of your device. 2. Connect the other end to the 5V cigarette lighter in the car to power and charge your device. The indicator on the car charger lights in green to indicate that power is being supplied to your device. Global Positioning System Connecting to a PC Always ensure that the GPS device and any other external device connected to the GPS device are switched off and unplugged from the Note power supply before you attempt to connect the GPS device to any external device. The GPS device is designed with a miniUSB port that allows you to connect the device to a PC for map update. The requirements of the PC are listed below. ¾ Windows 98SE, ME, 2000, or XP (Driver required for Windows 98SE) ¾ CD-ROM Drive (for map upgrade) ¾ Intel Pentium II 233 MHz ¾ 64 MB RAM ¾ Hard drive space of 50MB available ¾ USB Port available ¾ 256-color display (16 bit color required) Chapter 2: Basic Operation Chapter 2 Basic Operation Power ON and OFF Use the power button to power ON and OFF your device. When you press the power button to turn off the product, your device actually enters a suspend mode and the system stops operating. Once you power ON the system again, it resumes. Operating the Device To operate your device, touch the screen with a stylus or your fingertip. You can perform the following actions. Tap Touch the screen with the stylus or your fingertip to open the menu or an item. Drag Hold the stylus or your fingertip on the screen and drag up/down/left/right or across the screen to view photos. Global Positioning System Main Menu At the first time which you initialize your device, the Main Menu appears in about 3~5 seconds. The Main Menu is your starting place for various tasks. Tap a button to start a task or open another menu. Button Name Navigator Photo Description Entering the GPS navigation service Allowing you to view pictures in the formats of BMP, JPG, and GIF that were stored in a miniSD card or the built-in flash disk MP3 Allowing you to enjoy songs in the formats of MP3 and WMA that were stored in a miniSD card or the built-in flash disk BT Carkit Allowing you to talk on the device by means of Bluetooth wirelessly connected to your BT mobile phone Calculator Allowing you to do calculation Setup Entering to customize the device settings, such as backlight, volume, date and time, as briefly described below Setup Submenu On this setting page, you can customize the device settings, such as backlight, volume, date and time. Once you change the settings, your new settings will remain until you change them again. Button Name Clock Volume Battery Description Allowing you to select a Time Zone and set the current date and time Allowing you to enable or disable the key tone of touch pad and adjustment the volume of system Allowing you to read the battery status and set the system’s idle time Chapter 2: Basic Operation Button Name Description Display Allowing you to set the LCD’s idle time and adjust the backlight of LCD Bluetooth Allowing you to search for a Bluetoooth device around and pair the Bluetoooth device with your product System Showing the information on the system’s brief specification Inserting a MiniSD Card The GPS device is designed with a miniSD Card slot which allows you to insert the miniSD card into the GPS device. To use the miniSD card, insert it into the slot of the device, with the connector pointing to the slot and its label facing the front of the device. To remove the card, first make sure that no application is accessing the card, and then slightly push the top edge of the card to release and pull it out of the slot. Note 1. Make sure that no foreign object enters the slot. 2. Keep a miniSD card in a well protective box to avoid dust and humidity when you are not using it. Connecting an Earphone Connect an earphone to the left side of the device for private listening. After the earphone is connected, the speaker of GPS device will be automatically off. Excessively loud volume could damage your hearing. So turn down the volume before you connect the earphone, and then raise the volume to a Caution comfortable level. Global Positioning System 10 Chapter 3: Device Settings Chapter 3 Device Settings You can customize the device settings, such as brightness, volume, date and time, etc. Once you change the settings, your new settings will remain until you change them next time. To open the Setup menu, first tap the Setup icon on the main menu. After you tap the Setup icon on the main menu, the Setup submenu will now appear in the display. On this submenu you can set: Clock – Adjusting the time zone, date, and time Volume – Adjusting the system volume and enabling or disabling key tones Battery – Displaying current battery status and adjust the battery idle time Display – Adjusting the display idle time and brightness and calibrating the touch screen Bluetooth – Searching, pairing, connecting a Bluetooth device System – Viewing the system information, such as the information of firmware, CPU and the like Clock Tap Clock on the Setup submenu. 11 Global Positioning System The Clock page appears in the display. Time Zone Firstly, tap the rectangle area of Time Zone. To change the time zone, tap the left/right arrow on the Time Zone bar. Then, click at the upper right corner of the page to save the setting and go back to the last page. Date Firstly, tap the rectangle area of Date. To change Year, Month, and Day, tap the left/right arrow on the Date bar. Then, click at the upper right corner of the page to save the setting and go back to the last page. 12 Chapter 3: Device Settings Time Firstly, tap the rectangle area of Time. To change Hour, Minute, and Second, tap the left/right arrow on the Time bar. Then, click at the upper right corner of the page to save the setting and go back to the last page. Volume Tap Volume on the Setup submenu. The Volume page appears in the display. Check the Enable Keytone option if you would like to hear a clicking sound each time you tap on the display. If you are using the earphone, the Enable keytone option will be disabled automatically. 13 Global Positioning System Tap the + or – symbol to increase or decrease the volume. Then, click at the upper right corner of the page to save the setting and go back to the last page. Battery Tap Battery on the Setup submenu to check the remaining power of your battery and/or choose the idle time for power saving. The Power page appears in the display. Battery Status indicates the current status of battery. When the battery of GPS device is being charged, you see the indication of Battery Status : Charging; when the battery of GPS device is fully charged, you see the indication of Battery Status : 100% Tap the right or left arrow to choose the idle time of power. You can set a timer to automatically turn off your device when it is idle for a set period of time. The options include Never, 1 min, 2 min, 5 min, 10 min, and 15 min. For power saving, you had better choose the idle time. If you choose the idle time, the device will be in the suspend mode at the time you set. Then, click at the upper right corner of the page to save the setting and go back to the last page. 14 Chapter 3: Device Settings Display Tap Display on the Setup submenu. The Display page appears in the display. Tap the right or left arrow to choose the idle time of display. You can set a timer to automatically turn off your display when it is idle for a set period of time. The options include Never, 15 secs, 30 secs, 1 min, 2 min, and 5 min. For power saving, you had better choose the idle time. If you choose the idle time, the display will be turned off at the time you set. Tap the + or – symbol to increase or decrease the brightness of display. You can calibrate the touch screen if it is not responding accurately to your taps. Click Align Screen to calibrate the touch screen. 15 Global Positioning System You see a screen with 4 languages. Tap and hold the center of the target. When the target moves to another position, tap and hold the center of the new target. Repeat each time to complete the calibration process. Then, The Display page returns. Click at the upper right corner of the page to save the setting and go back to the last page. Bluetooth Tap Bluetooth on the Setup submenu. The Bluetooth page appears in the display. There are 2 tabs in the Bluetooth management, one for Mode and the other for Devices. Mode – You can turn on/off Bluetooth and make your device to be discovered by other devices with Bluetooth. Devices – You can manage all searched/paired devices. If you finish in the setting, click at the upper right corner of the page to save the setting and go back to the last page. 16 Chapter 3: Device Settings System Tap System on the Setup submenu. The System Info page appears in the display. You can read the system information in this page, such as model name, firmware version, NAND Flash size, SDRAM size, and CPU type. Click at the upper right corner of the page to go back to the last page. 17 Global Positioning System 18 Chapter 4: Main Menu Chapter 4 Main Menu Whenever switching ON the GPS device, you will see the main menu of system on the display. This main menu is the starting point where all of the functions exist for you to use. You can tap one of the functional icons to start the function you want. When the function exits, the system will take to the main menu of system. Button Name Description Entering the GPS navigation service Navigator Allowing you to view pictures in the formats of BMP, JPG, and GIF that were stored Photo in a miniSD card MP3 Allowing you to enjoy songs in the formats of MP3 and WMA that were stored in a miniSD card BT Carkit Allowing you to talk on the device by means of Bluetooth wirelessly connected to your BT mobile phone Calculator Allowing you to do calculation Setup Entering to customize the device settings, such as backlight, volume, date and time, as briefly described below Navigator Tap Navigator on the main menu of the display. After tapping the Navigator icon on the main menu, you enter the Warning page. If you agree on what is described on this page, click I Agree. For the detail of Navigator operation, please read a separately made user manual. Note 19 Global Positioning System Photo You can view photos or slideshow on your GPS device. Tap Photo on the main menu of the display. After tapping the Photo icon on the main menu, you enter the Photo page. Features of Photo Viewer ¾ Codec Engine Supports BMP, JPEG, and GIF formats Supports 1 bit, 4 bits, 8 bits, 16 bits, 24 bits, and 32 bits bitmap images Supports 8 bits and 24 bits JPEG images Supports 8 bits interlace and non-interlace static GIF images ¾ Control Functions Up one level, allowing you to surf the image files in the whole storage card Home, allowing you to go quickly back to root of storage card SlideShow ¾ Display Thumbnail View Image View Slideshow View 20 Chapter 4: Main Menu Viewing Photos If you cannot see photo thumbnails but instead folders (as shown in the figure above), then you can click one of the folders to access the contents (as shown in the illustration below). You can also scroll up or down to search up or down the list of folders or photos. Further, you can drag one of the photos, with a stylus, towards every column at the left side and every two columns at the right side; you can also drag it up and down. You will see 4 functional options at the bottom of the screen, which are defined as follows: Back button to move up to a level Home button to return to the first level where you enter from the main menu Slideshow button to show you photos in the slideshow mode Exit from this page to main menu Once you can see photos, you can click on one photo to show it at a full size. You will see 8 functional options at the bottom of the screen, which are defined as follows: Viewing a last photo Viewing a next photo Zoom in Zoom out Viewing a photo at the default rotation angle 21 Global Positioning System Viewing a photo at 90° (clockwise) View photo at 90° (anticlockwise) Exiting the screen Using the slideshow Make sure that you can see photo thumbnails at the steps outlined in Viewing Photos. Press the Slideshow button and the slideshow will start. To stop the slideshow, click everywhere on the screen. MP3 Player This section instructs you how to play MP3 files on your device. Tap MP3 on the main menu of the display. After tapping the MP3 icon on the main menu, you enter the MP3 Player page. Features of MP3 Player: ¾ Codec Engine Supports Win CE. NET 5.0 default (WMA and MP3) Supports sampling frequencies from 8 kHz to 48 kHz Minimum bit-rate supported 32kbps and Maximum bit-rate supported 320kbps or higher for 22 Chapter 4: Main Menu layer-3 Supports variable bit rates ¾ Control Functions Play List Display Play/Pause/Stop/Forward/Backward Volume Repeat mode 1. Repeat One 2. Repeat All Shuffle ¾ Display Displays play time elapsing Track name ID3 support Index of current playing title Definition of MP3 Player Buttons The MP3 Player buttons are defined as follows. 23 Global Positioning System Operation on MP3 Player On the MP3 player, press the Play button press the Pause button to begin listening to music. To pause the music, . To stop listening to the music, press the Stop button next track, press the Fast forward button . To skip to a . To go to the beginning of the current track or skip back to the previous track, press the Rewind button Adjusting the Player Volume To adjust the volume, press the Increase volume or Decrease volume buttons. Changing the order of tracks To choose between playing tracks in sequential order or random order, press the Select sequence/random button. The current order is indicated at the upper right corner of the page. The appearance of the Select sequence/random button changes with the Note current mode. Repeating tracks To repeat a track or tracks or not, press the Select linear/repeat button. The current mode is indicated at the upper right corner of the page. The appearance of the Select sequence/random button changes with the Note current mode. Displaying a play list Press the Play list button and then the Play list page appears on the display. By default, all tracks in the storage card will be added to the play list. Note To update all tracks from the memory card, please press the Update all tracks button. But MP3 Player will administrate this list automatically. To add tracks, press the Add track button and then navigate to the track/s you would like to add. And you can add several songs at the same time. This function is not used in the classified file. 24 Chapter 4: Main Menu To delete tracks, press the Delete track button in the My Favorite folder. And you can delete several songs at the same time. To return the previous page, press the Return button. BT Carkit With BT Carkit, you can make a phone call or answer a phone call thru the GPS device. Before using this function, pair and connect a Bluetooth mobile phone with Note the GPS device through Bluetooth. Tap BT Carkit on the main menu of the display. After tapping the BT Carkit icon on the main menu, you enter the BT Carkit page. Features of BT Carkit: ¾ Main Feature Supports dial pad Supports contact viewer Supports call history Supports phone shell, allowing you to pick up an incoming call ¾ Control Functions Digital keypad Backup Clear Dial / call history / contact viewer ¾ Display Displays phone number you want to dial out 25 Global Positioning System Contact Viewer Tap the Contact Viewer icon to view the phone numbers of all your friends. Features of Contacts Viewer: Supports Add Supports dial out / Edit / Delete functions from a list of contacts Call History Tap the Call History icon to view all the call history, including outgoing calls, incoming calls, and missed calls. Features of Call History: Supports the Delete Supports the Save Supports the Quick Dial history 26 function to delete all history functions function to save the calls to history for contact function, allowing you to very easily dial out from the call Chapter 4: Main Menu Phone Shell The phone shell program allows you to dial out and pick up an incoming call. Calculator Tap Calculator on the main menu of the display. After tapping the Calculator icon on the main menu, you enter the Calculator page. The calculator tool turns your device into a calculator. The calculator tool is easy to use, so you can press every button with your fingertips. Features of Calculator: Supports basic calculation, such as addition, subtraction, multiplication, division, square, and square root Supports memory function, such as MC, MR, M+ and M- Supports 12 digits as the maximum calculation result 27 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation FCC RF Radiation Exposure Statement: 1. This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. 2. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. 28
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Create Date : 2007:06:15 21:08:41+08:00 Modify Date : 2007:07:09 11:47:11+08:00 Company : Askey Computer Corp. Source Modified : D:20070615130802 Tagged PDF : Yes Producer : Acrobat Distiller 7.0.5 (Windows) Creation Date : 2007:06:15 21:08:41+08:00 Mod Date : 2007:07:09 11:47:11+08:00 Author : George Hou Headline : Creator Tool : Acrobat PDFMaker 7.0.7 for Word Metadata Date : 2007:07:09 11:47:11+08:00 Keywords : Document ID : uuid:e12a30b9-e9d9-41fd-b57b-2537e7b499ea Instance ID : uuid:1455ffde-78bc-4387-94b2-fc0d8bd89ab6 Version ID : 99 Format : application/pdf Title : U-GPSNDT7600ABPD61(RoHS)-V01 Creator : George Hou Subject : Page Count : 38 Page Layout : OneColumn Has XFA : NoEXIF Metadata provided by EXIF.tools