Askey Computer QBMSCFXL Multi - Sensor Camera User Manual warning 3 indd

Askey Computer Corp Multi - Sensor Camera warning 3 indd

Contents

Users Manual Safety Guide

Federal
Communications
Commission (FCC) Interference
Statement
This
equipment
has been tested and
found
to
comply
with the limits for a Class B digital device,
pursuant
to
Part 15 of the FCC
Rules.
These limits are
designed
to
provide reasonable protection
against
harmful
interference in a residential
installation.
This
equipment
generate, uses and can radiate radio
frequency energy
and, if not
installed
and
used in accordance with the instructions, may cause
harmful
interference to radio communications.
However,
there is no
guarantee
that interference will not occur in a particular
installation.
If this equipment
does cause
harmful
interference to radio or
television reception,
which can be
determined
by
turning
the
equipment
off and on, the user is
encouraged
to try to correct the interference by one of the following
measures:
–
Reorient or relocate the
receiving
antenna.
–
Increase the
separation between
the
equipment
and receiver.
–
Connect the
equipment
into an
outlet
on a circuit
different
from that to which the receiver is connected.
–
Consult the dealer or an
experienced
radio/TV
technician
for help.
Security &
Safety
Information &
Warnings
QB-MSC-FXL
This device
complies
with Part 15 of the FCC Rules.
Operation
is subject to the
following
two conditions:
(1) This device may not cause
harmful
interference, and
(2) this device must accept any interference received,
including
interference that may cause undesired
operation.
FCC Caution: Any changes or
modifications
not expressly
approved
by the party
responsible
for compliance
could void
the
user’s
authority
to
operate
this equipment.
RF exposure
warning
This
equipment complies
with FCC
radiation
exposure limits set forth for an
uncontrolled environment.
This
equipment
must be
installed
and
operated
in accordance with
provided instructions
and the antenna(s) used
for this
transmitter
must be
installed
to
provide
a
separation
distance of at least 20cm from all persons and
must not be
collocated
or
operating
in
conjunction
with any other
antenna
or transmitter.
European Union Regulatory
Conformance
The
equipment complies
with the RF Exposure
Requirement
1999/5/EC; Council
Recommendation
of 12 July
1999 on the
limitation
of exposure of the
general public
to
electromagnetic
fields
(0–300
GHz).
Changes or
modifications
to this
product
not
authorized
by our
company could void
the EMC compliance
and negate your
authority
to
operate
the
product.
This
product
has
demonstrated
EMC
compliance
under
conditions
that
included
the use of
compliant peripheral
devices and
shielded
cables
between
system
components.
It is
important
that you use
compliant peripheral
devices and
shielded
cables
between
system
components
to reduce the
possibility
of causing interference to radios,
televisions,
and other electronic
devices.
This
equipment
meets the
following conformance
standards:
EN 301489-1/-17, EN 55022, EN 55024
EN 300328, EN 301893
EN 62311
EN 60950-1
The device
complies
with RF specifications when the device used at 20cm form your body.
WLAN
function
of this device is restricted
only
to
indoor
use when
operating
in the 5150 to 5350 MHz
frequency
range.
低功率電波輻射性電機管理辦法
第十二條 經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變更頻率、加大功率或變
更原設計
之特性及功能。
第十四條 低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應立即停用，並改善至無
干擾時方
得繼續使用。前項合法通信，指依電信法規定作業之無線電通信。低功率射頻電機須忍受合法通信或工業、科學及醫
療用電波輻射性電機設備之干擾。
v3 – 01/2016

Navigation menu