Askey Computer WHD0100 Cloud Client Box User Manual

Askey Computer Corp Cloud Client Box

User Manual

CAX21
User Guide
First Edion
February 2015
Copyright © 2015 ASUSTeK COMPUTER INC. All Rights Reserved.
No part of this manual, including the products and soware described in it, may
be reproduced, transmied, transcribed, stored in a retrieval system, or translat-
ed into any language in any form or by any means, except documentaon kept
by the purchaser for backup purposes, without the express wrien permission of
ASUSTeK COMPUTER INC. (“ASUS”).
Product warranty or service will not be extended if: (1) the product is repaired,
modied or altered, unless such repair, modicaon of alteraon is authorized
in wring by ASUS; or (2) the serial number of the product is defaced or missing.
ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND,
EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED
WARRANTIES OR CONDITIONS OF MERCHANTABILITY OR FITNESS FOR A PAR-
TICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS DIRECTORS, OFFICERS, EM-
PLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR
CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS, LOSS
OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE
LIKE), EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
ARISING FROM ANY DEFECT OR ERROR IN THIS MANUAL OR PRODUCT.
SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FUR-
NISHED FOR INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT
ANY TIME WITHOUT NOTICE, AND SHOULD NOT BE CONSTRUED AS A COMMIT-
MENT BY ASUS. ASUS ASSUMES NO RESPONSIBILITY OR LIABILITY FOR ANY ER-
RORS OR INACCURACIES THAT MAY APPEAR IN THIS MANUAL, INCLUDING THE
PRODUCTS AND SOFTWARE DESCRIBED IN IT.
Products and corporate names appearing in this manual may or may not be
registered trademarks or copyrights of their respecve companies, and are used
only for idencaon or explanaon and to the owners’ benet, without intent
to infringe.
Safety Informaon
● Before seng up the client box, carefully read all the documentaon that
came with the package.
● To prevent re or shock hazard, never expose the monitor to rain or mois-
ture.
● Never try to open the box cabinet. The dangerous high voltages inside the
box may result in serious physical injury.
● If the power supply is broken, do not try to x it by yourself. Contact a
qualied service technician or your retailer.
● Before using the product, make sure all cables are correctly connected and
the power cables are not damaged. If you detect any damage, contact your
dealer immediately.
● Slots and openings on the back or top of the cabinet are provided for ven-
laon. Do not block these slots. Never place this product near or over a
radiator or heat source unless proper venlaon is provided.
● The client box should be operated only from the type of power source
indicated on the label. If you are not sure of the type of power supply to
your home, consult your dealer or local power company.
● Use the appropriate power plug which complies with your local power
standard.
● Do not overload power strips and extenon cords. Overloading can result in
re or electric shock.
● Avoid dust, humidity, and temperature extremes. Do not place the box in
any area where it may become wet. Place the box on a stable surface.
● Unplug the unit during a lightning storm or if it will not be used for a long
period of me. This will protect the box from damage due to power surges.
● Never push objects or spill liquid of any kind into the slots on the box cabi-
net.
● The socket-outlet shall be installed near the equipment and shall be easily
accessible.
● If you encounter technical problems with the client box, contact a qualied
service technician or your retailer.
Client Box introducon
Copyright © 2015 ASUSTeK COMPUTER INC. All Rights Reserved.
Client Box introducon
Front of the box
Side of the box
Rear of the box
Wall mount bracket (Oponal)
Earphone-out
Power key
Micro SD slot
Kensington lock
Microphone input
VGA
HDMI
RJ45
Power-in jack
USB connector
Hanging hole
Wall mount 100x100mm
Wall mount 75x75mm
Cleats
Remote Control
1. Power buon
Installing remote control baery
1. Open the baery compartment cover.
2. Remove the insulator and insert the
baery with the posive(+) symbol
facing up.
3. Ret the baery compartment cover.
The incorrect use of baeries
can result in leaks or bursng.
Be sure to follow the instrucon.
2. OK buon
3. Home buon
4. Volume Up
5. Volume Down
6. Seng buon
7. Back buon
8. Four Direconal
select
9. Mute buon
- Press and hold the buon
to turns the box on/o.
- Press the buon once to
put the box in sleep mode.
- Conrms the selecon.
- Enters the submenu.
Goes back to the main page.
Increases the volume level.
Decreases the volume level.
Turns the seng page on/o.
Goes back to the previous Page.
- Selects a menu item
- Adjusts the seng
Mutes the audio. Press it again
to disable the mute Funcon.
Specicaon
Connecng the display
Before seng up the client box, please nd the HDMI or VGA input interface.
Aer connecng the input cable, please switch HDMI/VGA signals via the
monitor’s input selecon buon.
Please follow the steps below to connect the client box:
Place the client box on the at surface near the monitor. Let the back/rear
panel facing you to clearly see the back panel I/O ports interface.
1. Plug the power cord to the client box’s power interface and connect
the power adapter to a socket.
2. Connect one end of the HDMI/VGA cable to the client box, the other
end to the monitor’s HDMI/VGA interface.
3. Press the power buon ( ) on top of the client box for 4 seconds.
The monitor will then display the startup screen of the operaon
system.
Model CAX21
CPU ARM quad-core Cortex-A9 1.6GHz
ROM DDRIII 2GB
RAM NAND FLASH 8GB
Network RJ45 10/100Mbps
WLAN 802.11b/g/n
Bluetooth 4.0
Operang System Android 4.4
I/O port 1x Micro SD slot
1x VGA, 1x HDMI
1x Earphone jack, 1x Microphone jack
3x USB2.0, 1x USB2.0 OTG
Wall mount bracket 75mm
Operang power 6.8W
Stand-By power 3.2W
Operang Temperature 0~40 ℃
Power Supply 15W(5V3A) Power adaptor
Phys. Dimension (W x H x D) 129.5 x 25 x 108 mm
Box Dimension (W x H x D) 290 x 270 x 287 mm
Accessory a AC Adapter, User guide, Warranty Card
Remote control
Oponal Wall mount bracket
NCC 警語 (以下警語適用台灣地區)
1. 經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變更頻率、加大功率
或變更原設計之特性及功能。
2. 低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應立即停用，並改
善至無干擾時方得繼續使用。前項合法通信，指依電信法規定作業之無線電通信。低功率射頻電機須
忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protecon against harmful interference in a
residenal installaon. This equipment generates, uses and can radiate radio frequency energy and, if not in-
stalled and used in accordance with the instrucons, may cause harmful interference to radio communicaons.
However, there is no guarantee that interference will not occur in a parcular installaon. If this equipment does
cause harmful interference to radio or television recepon, which can be determined by turning the equipment o
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
● Reorient or relocate the receiving antenna.
● Increase the separaon between the equipment and receiver.
● Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
● Consult the dealer or an experienced radio/TV technician for help.
FCC Cauon: Any changes or modicaons not expressly approved by the party responsible for compliance could
void the user's authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operaon is subject to the following two condions: (1) this
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operaon. This device and its antenna(s) must not be co-located or oper-
ang in conjuncon with any other antenna or transmier.
IMPORTANT NOTE:
FCC Radiaon Exposure Statement:
This equipment complies with FCC radiaon exposure limits set forth for an uncontrolled environment. This
equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
■ ASUSTeK Computer Inc. ■ Technical Support
Address 15 Li-Te Rd. Peitou,
Taipei 11259, Taiwan
Telephone +886-2-2894-3447
Fax +886-2-2894-7798
E-mail info@asus.com.tw
Website hp://www.asus.com/tw/
Telephone +886-2-7736-0456
■ ASUS Computer Internal (America) ■ Technical Support
Address 800 Corporate Way,
Fremont, CA 94539, USA
Fax +1-510-608-4555
Website hp://www.asus.com/us/
Telephone
(English Only) +1-812-282-2787
(French Only) +1-905-370-2787
Online Support hp://support.asus.com/
■ Technical Support
Telephone +49-1805-010923
Support Fax +49-2102-959911
Online Support hp://support.asus.com/
■ ASUS Computer GmbH
(Germany and Austria)
Address Harkortstr. 21-23
D-40880 Rangen, Germany
Telephone +49-1805-010920
Website hp://www.asus.com/de/
ASUS CONTACT INFORMATION
Use Wall mount bracket
Before using the wall mount bracket, please equip a 75x75mm or 100x100mm
VESA wall-mounng compliant display and compable screws.
Please follow the steps below to wall mount the client box:
1. Aach the wall mount bracket to the back of display and x with the
screw to join them ghtly.
2. Connect the hanging hole at the boom of the client box with the cleats
of the wall mount bracket. Slightly pull the client box down to secure it.
設備名稱: 雲客戶機，型號: CAX21
單元
限用物質及其化學符號
鉛
(Pb)
汞
(Hg)
鎘
(Cd)
六價鉻
多溴聯苯
(PBB)
多溴二苯醚
(PBDE)
印刷電路板及電子組件 O O O O O O
其他及其配件 O O O O O O
備考 1.〝○〞係指該項限用物質之百分比含量未超出百分比含量基準值。
｢產品之限用物質含有情況｣之相關資訊，請參考下表
Innovation, Science and Economic Development Canada (ISED)
This device complies with RSS210 of Industry Canada.
CAUTION: Exposure to Radio Frequency Radiation. The installer of this radio equipment must
ensure that the antenna is located or pointed such that it does not emit RF field in excess of
Health Canada limits for the general population. Consult Safety Code 6, obtainable from health
Canada’s website www.hc-sc.ca/rpb.
This device complies with Innovation, Science and Economic Development Canada license-exempt
RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference received, including interference
that may cause undesired operation.
Ce dispositif est conforme à la norme CNR Innovation, Sciences et Développement économique
Canada applicables aux appareils radio exempts de licence. Son fonctionnement est sujet aux deux
conditions suivantes: (1) le dispositif ne doit pas produire de brouillage préjudiciable, et (2) ce dispositif
doit accepter tout brouillage reçu, y compris un brouillage susceptible de provoquer un fonctionnement
indésirable.
Radiation Exposure Statement:
This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm between the radiator &
your body.
Déclaration d'exposition aux radiations:
Cet équipement est conforme aux limites d'exposion aux rayonnements ISED établies pour un environnement
non contrôlé. Cet équipement doit être installé et ulisé avec un minimum de 20 cm de distance entre la source
de rayonnement et votre corps.

Navigation menu