Askey Computer WHD0100 Cloud Client Box User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3244001
Application ID	UyTqMQnO9fvTRPX5UbkryA==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	111.72kB (1396478 bits)
Date Submitted	2016-12-30 00:00:00
Date Available	2016-12-30 00:00:00
Creation Date	2016-06-24 12:13:13
Producing Software	Microsoft® Publisher 2010
Document Lastmod	2016-06-24 12:13:13
Document Title	User Manual
Document Creator	Microsoft® Publisher 2010
Document Author:	Gal Huang(黃于容)

First Edition
February 2015
CAX21
Safety Information
●
●
Copyright © 2015 ASUSTeK COMPUTER INC. All Rights Reserved.
●
User Guide
No part of this manual, including the products and software described in it, may
be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept
by the purchaser for backup purposes, without the express written permission of
ASUSTeK COMPUTER INC. (“ASUS”).
Product warranty or service will not be extended if: (1) the product is repaired,
modified or altered, unless such repair, modification of alteration is authorized
in writing by ASUS; or (2) the serial number of the product is defaced or missing.
●
●
●
●
ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND,
EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED
WARRANTIES OR CONDITIONS OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR
CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS, LOSS
OF BUSINESS, LOSS OF USE OR DATA,
INTERRUPTION OF BUSINESS AND THE
LIKE), EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
ARISING FROM ANY DEFECT OR ERROR IN THIS MANUAL OR PRODUCT.
SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT
ANY TIME WITHOUT NOTICE, AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS MANUAL, INCLUDING THE
PRODUCTS AND SOFTWARE DESCRIBED IN IT.
Copyright © 2015 ASUSTeK COMPUTER INC. All Rights Reserved.
Products and corporate names appearing in this manual may or may not be
registered trademarks or copyrights of their respective companies, and are used
only for identification or explanation and to the owners’ benefit, without intent
to infringe.
●
●
●
●
●
●
●
Before setting up the client box, carefully read all the documentation that
came with the package.
To prevent fire or shock hazard, never expose the monitor to rain or moisture.
Never try to open the box cabinet. The dangerous high voltages inside the
box may result in serious physical injury.
If the power supply is broken, do not try to fix it by yourself. Contact a
qualified service technician or your retailer.
Before using the product, make sure all cables are correctly connected and
the power cables are not damaged. If you detect any damage, contact your
dealer immediately.
Slots and openings on the back or top of the cabinet are provided for ventilation. Do not block these slots. Never place this product near or over a
radiator or heat source unless proper ventilation is provided.
The client box should be operated only from the type of power source
indicated on the label. If you are not sure of the type of power supply to
your home, consult your dealer or local power company.
Use the appropriate power plug which complies with your local power
standard.
Do not overload power strips and extention cords. Overloading can result in
fire or electric shock.
Avoid dust, humidity, and temperature extremes. Do not place the box in
any area where it may become wet. Place the box on a stable surface.
Unplug the unit during a lightning storm or if it will not be used for a long
period of time. This will protect the box from damage due to power surges.
Never push objects or spill liquid of any kind into the slots on the box cabinet.
The socket-outlet shall be installed near the equipment and shall be easily
accessible.
If you encounter technical problems with the client box, contact a qualified
service technician or your retailer.
Client Box introduction
Client Box introduction
Front of the box
Rear of the box
Remote Control
1.
Power button
- Press and hold the button
to turns the box on/off.
- Press the button once to
put the box in sleep mode.
2.
OK button
- Confirms the selection.
- Enters the submenu.
Side of the box
Wall mount bracket (Optional)
3.
Home button
Goes back to the main page.
4.
Volume Up
Increases the volume level.
5.
Volume Down
Decreases the volume level.
6.
Setting button
Turns the setting page on/off.
7.
Back button
Goes back to the previous Page.
8.
Four Directional - Selects a menu item
select
- Adjusts the setting
9.
Mute button
Mutes the audio. Press it again
to disable the mute Function.
Installing remote control battery
1. Open the battery compartment cover.
2. Remove the insulator and insert the
battery with the positive(+) symbol
facing up.
3. Refit the battery compartment cover.
Power key
VGA
Micro SD slot
HDMI
Kensington lock
RJ45
Microphone input
Power-in jack
Hanging hole
Wall mount 75x75mm
Earphone-out
USB connector
Wall mount 100x100mm
Cleats
The incorrect use of batteries
can result in leaks or bursting.
Be sure to follow the instruction.
Connecting the display
Before setting up the client box, please find the HDMI or VGA input interface.
After connecting the input cable, please switch HDMI/VGA signals via the
monitor’s input selection button.
Please follow the steps below to connect the client box:
Place the client box on the flat surface near the monitor. Let the back/rear
panel facing you to clearly see the back panel I/O ports interface.
1.
Plug the power cord to the client box’s power interface and connect
the power adapter to a socket.
2.
Connect one end of the HDMI/VGA cable to the client box, the other
end to the monitor’s HDMI/VGA interface.
3.
Press the power button ( ) on top of the client box for 4 seconds.
The monitor will then display the startup screen of the operation
system.
Use Wall mount bracket
Before using the wall mount bracket, please equip a 75x75mm or 100x100mm
VESA wall-mounting compliant display and compatible screws.
Please follow the steps below to wall mount the client box:
1.
Attach the wall mount bracket to the back of display and fix with the
screw to join them tightly.
2.
NCC 警語 (以下警語適用台灣地區)
Specification
Model
1.
CAX21
CPU
ARM quad-core Cortex-A9 1.6GHz
ROM
DDRIII 2GB
RAM
NAND FLASH 8GB
經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變更頻率、加大功率
Network
Operating System
RJ45 10/100Mbps
WLAN 802.11b/g/n
Bluetooth 4.0
Android 4.4
2.
I/O port
善至無干擾時方得繼續使用。前項合法通信，指依電信法規定作業之無線電通信。低功率射頻電機須
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
●
Increase the separation between the equipment and receiver.
●
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
●
Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate this equipment.
Wall mount bracket
75mm
Operating power
6.8W
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter.
3.2W
IMPORTANT NOTE:
Stand-By power
設備名稱: 雲客戶機，型號: CAX21
限用物質及其化學符號
低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應立即停用，並改
●
1x Micro SD slot
1x VGA, 1x HDMI
1x Earphone jack, 1x Microphone jack
3x USB2.0, 1x USB2.0 OTG
｢產品之限用物質含有情況｣之相關資訊，請參考下表
This device complies with RSS210 of Industry Canada.
或變更原設計之特性及功能。
忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。
Connect the hanging hole at the bottom of the client box with the cleats
of the wall mount bracket. Slightly pull the client box down to secure it.
Innovation, Science and Economic Development Canada (ISED)
CAUTION: Exposure to Radio Frequency Radiation. The installer of this radio equipment must
ensure that the antenna is located or pointed such that it does not emit RF field in excess of
Health Canada limits for the general population. Consult Safety Code 6, obtainable from health
Canada’s website www.hc-sc.ca/rpb.
This device complies with Innovation, Science and Economic Development Canada license-exempt
RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference received, including interference
that may cause undesired operation.
Ce dispositif est conforme à la norme CNR Innovation, Sciences et Développement économique
Canada applicables aux appareils radio exempts de licence. Son fonctionnement est sujet aux deux
conditions suivantes: (1) le dispositif ne doit pas produire de brouillage préjudiciable, et (2) ce dispositif
doit accepter tout brouillage reçu, y compris un brouillage susceptible de provoquer un fonctionnement
indésirable.
Radiation Exposure Statement:
This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm between the radiator &
your body.
單元
鉛
汞
鎘
(Pb)
(Hg)
(Cd)
印刷電路板及電子組件
其他及其配件
Power Supply
0~40 ℃
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This
equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
129.5 x 25 x 108 mm
Box Dimension (W x H x D)
290 x 270 x 287 mm
ASUS CONTACT INFORMATION
■ ASUSTeK Computer Inc.
Address
15 Li-Te Rd. Peitou,
Taipei 11259, Taiwan
Telephone +886-2-2894-3447
Fax
+886-2-2894-7798
E-mail
info@asus.com.tw
Website
http://www.asus.com/tw/
■ Technical Support
Telephone +886-2-7736-0456
Déclaration d'exposition aux radiations:
Cet équipement est conforme aux limites d'exposition aux rayonnements ISED établies pour un environnement
non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source
de rayonnement et votre corps.
■ ASUS Computer Internal (America)
Address
Fax
Website
800 Corporate Way,
Fremont, CA 94539, USA
+1-510-608-4555
http://www.asus.com/us/
■ ASUS Computer GmbH
(Germany and Austria)
Address
Optional
(PBDE)
■ Technical Support
Telephone
(English Only) +1-812-282-2787
(French Only) +1-905-370-2787
Online Support http://support.asus.com/
15W(5V3A) Power adaptor
Phys. Dimension (W x H x D)
Accessory a
多溴二苯醚
(PBB)
備考 1.〝○〞係指該項限用物質之百分比含量未超出百分比含量基準值。
FCC Radiation Exposure Statement:
Operating Temperature
多溴聯苯
六價鉻
AC Adapter, User guide, Warranty Card
Remote control
Wall mount bracket
Harkortstr. 21-23
D-40880 Ratingen, Germany
Telephone +49-1805-010920
Website
http://www.asus.com/de/
■ Technical Support
Telephone
+49-1805-010923
Support Fax
+49-2102-959911
Online Support http://support.asus.com/

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 2
Language                        : zh-TW
Tagged PDF                      : Yes
Author                          : Gal Huang(黃于容)
Create Date                     : 2016:06:24 12:13:13+08:00
Modify Date                     : 2016:06:24 12:13:13+08:00
Producer                        : Microsoft® Publisher 2010
Creator                         : Microsoft® Publisher 2010

EXIF Metadata provided by EXIF.tools