Attenti PC-840 Pull Cord Station User Manual Pull Cord V00x

Download:
Mirror Download [FCC.gov]
Document ID	1789159
Application ID	cHn+1DewIaac/WTRpz+jbw==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	14.65kB (183110 bits)
Date Submitted	2012-09-12 00:00:00
Date Available	2013-03-11 00:00:00
Creation Date	2012-06-11 09:01:40
Producing Software	Acrobat Distiller 7.0.5 (Windows)
Document Lastmod	2012-06-11 09:01:40
Document Title	Pull Cord User Manual-V00.pdfx.pdf
Document Creator	PScript5.dll Version 5.2.2
Document Author:	Iliya

3M Resident Monitoring
7170 W. Donges Bay Road
Toll Free: 800-606-0661
Mequon, WI 35092
Office: 414-358-8200
Fax: 414-358-8100
www.3m.com/residentmonitoring
Pull Cord
USER MANUAL
Copyright ” 2012 all rights reserved
This document contains information that is proprietary to Attenti Ltd. No part of this publication may be reproduced in any
form whatsoever without prior written approval by Attenti.
3M Resident Monitoring
Pull Cord User Manual
TABLE OF CONTENTS
Foreword............................................................................................................................................................ 3
1.1
Pull Cord with RFID Device - State machine Drawing: ........................................................................... 4
1.2
Pull Cord with RFID Device - Indications: ............................................................................................... 5
1.3
Pull Cord without RFID Device (emulating PC 830) - State machine Drawing: ...................................... 6
1.4
Pull Cord without RFID Device (emulating PC 830) - Indications: .......................................................... 7
1.5
Activating the Pull Cord: .......................................................................................................................... 8
1.6
Activating a Panic Alert: .......................................................................................................................... 8
1.7
Deactivating a Panic Alert: ...................................................................................................................... 8
1.8
Deactivating the Pull Cord: ...................................................................................................................... 8
1.9
Cleaning Instructions ............................................................................................................................... 8
FCC Notices ...................................................................................................................................................... 9
Page: 2 of 9
3M Resident Monitoring
Pull Cord User Manual
FOREWORD
The Pull Cord is a small wall-mounted device, to be installed at bedside and in the bathroom of nursing homes
and assisted living homes. Once pulled, the Pull Cord Device shall transmit panic messages once every 20
seconds until it is reset by a nurse using NTT device with RFID tag. The Pull cord shall include RFID reader
circuit to support handshake with the Nurse Tag Transmitter (NTT). When the staff members present/taps the
NTT on the pull cord, the Pull cord will detect the tag and will send NTT ID to the system. The first time that the
PC-GHWHFWVWKH177LWVKDOOVHQGD³Staff assistance enters´PHVVDJHWRWKHV\VWHP,IWKHVDPH177LV
detected a second time, the PC-VKDOOVHQGD³Staff assistance left´PHVVDJH to the system. In case the nurse
did not tap the NTT on leave, the PC-ZLOOVHQG³$XWR-OHIW´PHVVDJHDIWHUPLQThe PC-840 save up to 10
NTT ID, for each NTT the PC-VHQG³Staff assistance enters´DQG³Staff assistance left´PHVVDJHDQGKDYH
sepDUDWHWLPHUIRU³DXWR-OHIW´PHVVDJH Once pulled, the PC-840 shall close a Normally Open (N/O) output or
open a Normally Closed (N/C) output that will used to turn on/off a corridor indication light. While the Pull Cord is
ON, it shall transmit a status message, once every hour, to indicate that it is still functioning and to report its
power supply state. A button, on the PC-840, shall be used for perform resident wellness check-in, while an
DGGLWLRQDOVZLWFKZLOOEHXVHGIRUDQXUVHUHTXHVWIRUKHOS ³&RGH%OXH´ :KHQ³&RGH%OXH´LVDFWLYDWHGWKH3XOO
FRUGVKDOOWXUQRQWKHFRUULGRUOLJKWDQGZKHQWKH³&RGH%OXH´LVGHDFWLYDWHGGHYLFHVKDOOWXUQRIIFRUULGRUOLJKW
The pull cord has three main variants:
1. With RFID reader- Pull Cord 840
2. Without RFID reader (emulating PC 830)
3. Without RFID with external power option (emulating PC 830)
Page: 3 of 9
3M Resident Monitoring
1.1
Pull Cord User Manual
Pull Cord with RFID Device - State machine Drawing:
Page: 4 of 9
3M Resident Monitoring
1.2
Pull Cord User Manual
Pull Cord with RFID Device - Indications:
LED Indication
External
power
Battery
Alarm
Nurse present
Swipe
Steady Green
OK
OK
No
ÂŤ
ÂŤ
Orange
(flash every 2
sec.)
Missing
OK
No
ÂŤ
ÂŤ
Orange
(flash every 10
sec.)
'RQÂśW&DUH
Low
No
ÂŤ
ÂŤ
Steady Red
OK
OK
Yes
ÂŤ
ÂŤ
Red
(flash every 10
sec.)
Missing
'RQÂśW&DUH
Yes
ÂŤ
ÂŤ
Green
'RQÂśW&DUH
'RQÂśWCare
No
ÂŤ
Yes
Red (flash 3
times fast)
'RQÂśW&DUH
'RQÂśW&DUH
Yes
ÂŤ
Yes
Green (slow
flashing)
'RQÂśW&DUH
'RQÂśW&DUH
No
Yes
ÂŤ
Red (slow
flashing)
'RQÂśW&DUH
'RQÂśW&DUH
Yes
Yes
ÂŤ
(flash 3 times
fast)
Steady Green
Orange
Red
Fast flashing
Slow flashing
= OK
= Power Trouble
= Alarm
= Swipe confirmation
= Nurse present
Activity Button and Nurse Presence LED Functionality
1) When switch pressed OnceÂą Long Red LED blink (1 Second)
2) When switch pressed twice Âą Logs Red LED blink (1 Second)
The buzzer shall beep shortly one-time when RFID reader successful read NTT RFID tag and send
³1XUVH3UHVHQFH´PHVVDJH. The buzzer shall beep shortly two time when read NTT RFID tag and send
³1XUVHOHIW´PHVVDJH
Page: 5 of 9
3M Resident Monitoring
1.3
Pull Cord User Manual
Pull Cord without RFID Device (emulating PC 830) - State machine Drawing:
Page: 6 of 9
3M Resident Monitoring
1.4
Pull Cord User Manual
Pull Cord without RFID Device (emulating PC 830) - Indications:
AC Power
Battery
Alarm
Code Blue
LED Indication
OK
OK
No
No
LED Off
Missing
OK
No
No
LED Off
OK
OK
Yes
No
Steady Red
Missing
OK
Yes
No
Flashing Red (every 20 sec.)
OK
OK
No
Yes
Steady Red
Missing
OK
No
Yes
Flashing Red (every 20 sec.)
OK
OK
Yes
Yes
Steady Red
Missing
OK
Yes
Yes
Flashing Red (every 20 sec.)
OK
Low
No
No
On startup 5 Red Flashes of 100 mSec
Missing
Low
No
No
On startup 5 Red Flashes of 100 mSec
OK
Low
Yes
No
Alarm Start with 5 Red Flashed of 100
mSec and then Steady Red
Missing
Low
Yes
No
5 Red Flashes of 100 mSec (every 20
sec.)
OK
Low
No
Yes
Alarm Start with 5 Red Flashed of 100
mSec and then Steady Red
Missing
Low
No
Yes
5 Red Flashes of 100 mSec (every 20
sec.)
OK
Low
Yes
Yes
Alarm Start with 5 Red Flashed of 100
mSec and then Steady Red
Missing
Low
Yes
Yes
5 Red Flashes of 100 mSec (every 20
sec.)
Activity Button and Nurse Presence LED Functionality
3) When switch pressed OnceÂą Long Red LED blink (1 Second)
4) When switch pressed twice Âą Logs Red LED blink (1 Second)
Notes
1)
2)
3)
4)
5)
In Power operated Mode Âą The Red LED will light constantly during alarm.
In Battery operated mode Âą Same as 830 Âą Battery consumption led blinking
Orange and Green Colors are not in use in this mode.
Alarm = Pull Cord or Push Cord or Zettler (or any combination)
Activity button LED work the same regardless the battery and power status
x Red
= Alarm
Page: 7 of 9
3M Resident Monitoring
1.5
Pull Cord User Manual
Activating the Pull Cord:
The Pull Cord have an on/off function, to enable battery life saving while not in use, and aviation safety while
being shipped.
The Pull Cord is turned off by the manufacturer before shipment and must be activated before use. To activate,
hold the Pull Cord insert the battery into the PCB.
Once the Pull Cord is working, it sends a status message every 60sec to the monitoring station. The monitoring
station then indicates the current battery status. This status message is sent until the Pull Cord is deactivated.
1.6
Activating a Panic Alert:
To move from an ACTIVE Âą NO ALARM mode to an ACTIVE Âą PANIC ALARM mode Âą the user will have to
pull the PCD cord.
Once in panic alert mode, the Pull Cord sends a panic alert message to the monitoring station. This message is
sent until the panic alert is deactivated.
1.7
Deactivating a Panic Alert:
To move back from an ACTIVE Âą PANIC ALARM mode to an ACTIVE Âą NO ALARM mode (= Reset operation)
Âą the user will have to move the pulled down knob to its original upper position.
Even though the panic alert has been deactivated, the Pull Cord is still working. Therefore, the Pull Cord still
sends a status message to the monitoring station. This status message is sent until the Pull Cord is
deactivated.
1.8
Deactivating the Pull Cord:
Holding the Pull Cord and take off the Battery. The Pull Cord is now in deactivated mode (turned off).
1.9
Cleaning Instructions
A soft brush and any cleaning solution are all that is needed to clean the Pull Cord.
Alcohol based solutions; Soapy water or Lysol can be used to clean the Pull Cord.
Page: 8 of 9
3M Resident Monitoring
Pull Cord User Manual
FCC NOTICES
This note is applicable to the American Pull Cord
NOTE
The Pull Cord complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause
undesired operation.
This device has been tested and found to comply with the limits of the Class B digital device,
pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This device generates, uses and can
radiate radio frequency energy and, if installed and used in accordance with the instruction, may
cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this device does cause harmful
interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to correct the interference by one or more of the following
measures
Reorient or relocate the receiving antenna
Increase the separation between the equipment and the receiver.
Consult the dealer or an experienced radio/TV technician for help.
CAUTION
Any changes or modifications not expressly approved by the grantee of this device could void
WKHXVHUÂśVDXWKRULW\WRRSHUDWHWKHHTXLSPHQW
For Customer Support contact:
3M Resident Monitoring.
Toll Free
1-800-606-0661
Fax
+1-414-358-8100
Web:
www.3M.com/residentmonitoring
Page: 9 of 9

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0.5 (Windows)
Create Date                     : 2012:06:11 09:01:40+02:00
Modify Date                     : 2012:06:11 09:01:40+02:00
Metadata Date                   : 2012:06:11 09:01:29+01:00
Creator Tool                    : PScript5.dll Version 5.2.2
Document ID                     : uuid:0F052C4593B3E1119639B7B77D966C1E
Instance ID                     : uuid:e4c16611-26a7-46f2-af59-fdaa24ed8ef1
Derived From                    : 
Format                          : application/postscript
Creator                         : Iliya
Title                           : Pull Cord User Manual-V00.pdfx.pdf
Page Count                      : 9
Author                          : Iliya

EXIF Metadata provided by EXIF.tools